Booter

Usage of Booter

Disclaimer: I take no responsibility for abuse use of booter of IP Tools! Before using, ask permission to send packets to certain host to prevent further problems. Sending packets like this can be seen as denial of service!

This booter can send TCP and UDP packets to certain host with packet count and packet ack.

Protocol

You can use either tcp or udp protocol. By using tcp, you will send packet that will ask for connection to target pc. By using udp, you just send packets to target pc.

Target information

There is two information fields that need to be filled before launching. First field is IP Address where you put target machine ip or domain. Second field is for port, here you can specify port for sending packets.

Packet Information

This is basically content of your packets.

Packet Count

You can use looping method by putting value of packet count to -1 or specify number of times to send a

Attack button, Progress bar and STOP button

Here you can start sending packets by pressing Attack button. You must define fields mentioned above first to make this work. Progress bar will show to you how much have been sent to target machine. Use stop button for emergency shutdown.