Create Workshop for OCW24 HOL WMS ID#11641 , WMS ID# 11698 (#51)

* organize folder structures

* WMS ID #11698: Adding initial workshop structure

* Create ExaDB-XS Structure

exadata-database-service-dedicated/automatic-infrastructure-maintenance/automatic-infrastructure-maintenance.md

@@ -0,0 +1,71 @@
+
+
+
+# Review Option to configure Automatic Infrastructure Maintenance
+
+
+## Introduction
+
+This lab walks you through the steps to configure Automatic Infrastructure Maintenance for your Exadata Cloud@Customer Infrastructure.
+
+Estimated Lab Time: 15 minutes
+
+<!-- Watch the video below for a quick walk-through of the lab.
+[Create an Exadata Database Service on Cloud@Customer Infrastructure](youtube:DCrivNA5bs8)
+-->
+### Objectives
+
+-   After completing this lab, you should be able to configure Automatic Infrastructure Maintenance for your Exadata Cloud@Customer Infrastructure.
+
+### Prerequisites
+
+This lab requires completion of the following:
+
+* Completion of **Lab1**
+
+## Task 1: Review Option to configure Automatic Infrastructure Maintenance
+
+*(For this lab, Informational Instructions for Configuring Automatic Infrastructure Maintenance for the Exadata Database Service on Cloud@Customer environment will be presented by the speakers)*
+
+1. Open the navigation menu. Under **Oracle Database**, click **Exadata Database Service on Cloud@Customer**.
+
+2. Select your ***Assigned Region*** and ***Assigned Compartment*** 
+
+3. Click your ***Assigned Exadata Infrastructure***
+
+4. Click **Edit Maintenance Preferences**.
+
+5. On the Edit Maintenance Preferences page, configure the following:
+
+    **Choose a maintenance method**:
+
+    * **Rolling**: By default, Exadata Infrastructure is updated in a rolling fashion, one server at a time with no downtime.
+    * **Non-rolling**: Update database and storage servers at the same time. The non-rolling maintenance method minimizes maintenance time but incurs full system downtime.
+
+    **Enable custom action before performing maintenance on DB servers**: Enable custom action only if you want to perform additional actions outside of Oracle’s purview
+
+    * **Configure Custom action timeout (in minutes)**: Timeout available to perform custom action before starting maintenance on the DB Servers.
+
+    **Maintenance schedule**:
+
+    * **Under Maintenance months**, specify at least one month for each quarter during which Exadata infrastructure maintenance will take place. 
+    * **Under Week of the month**, specify which week of the month, maintenance will take place. 
+    * **Under Day of the week**, specify the day of the week on which the maintenance will occur.
+    * **Under Start hour**, specify the hour during which the maintenance run will begin.
+    * **Under Lead Time**, specify the minimum number of weeks ahead of the maintenance event you would like to receive a notification message.
+
+6. Click **Save Changes**.
+
+You may now **proceed to the next lab**
+
+## Learn More
+
+* Click [here](https://docs.oracle.com/en/engineered-systems/exadata-cloud-at-customer/ecccm/ecc-vw-maint-hist.html#GUID-94A6038F-6329-46BC-AEBD-E5491D67B72F) to learn more about Configuring Oracle-Managed Infrastructure Maintenance for Exadata Database Service on Cloud@Customer.
+
+## Acknowledgements
+
+* **Author** - Leo Alvarado, Eddie Ambler, Product Management
+
+* **Contributors** - Tammy Bednar, Product Management
+
+* **Last Updated By** - Leo Alvarado, Product Management, September 2023.

exadata-database-service-dedicated/change-license-type/change-license-type.md

@@ -0,0 +1,52 @@
+
+
+
+# Change License Type using OCI Console
+
+
+## Introduction
+
+This lab walks you through the steps to Change License Type using OCI Console.
+
+Estimated Lab Time: 15 minutes
+
+<!-- Watch the video below for a quick walk-through of the lab.
+[Create an Exadata Database Service on Cloud@Customer Infrastructure](youtube:DCrivNA5bs8)
+-->
+### Objectives
+
+-   After completing this lab, you should be able to Change License Type using OCI Console
+
+### Prerequisites
+
+This lab requires completion of the following:
+
+* Completion of **Lab1**
+
+## Task 1: Change License Type using OCI Console 
+
+1. Open the navigation menu. Under **Oracle Database**, click **Exadata Database Service on Cloud@Customer**.
+
+2. Select your ***Assigned Compartment***, and Click your assigned **VM Cluster** named ***MyVMClusterXX***.
+
+3. In the VM Cluster Details page, Click **Update License Type** 
+
+   ![Update License Type](./images/update-license-type-button.png " ")
+
+4. Change the license type from **Bring Your Own License (BYOL)** to ***License Included***
+
+   ![Update License Type](./images/change-license-included.png " ")
+
+5. Click **Save Changes**
+
+
+You may now **proceed to the next lab**
+
+
+## Acknowledgements
+
+* **Author** - Leo Alvarado, Eddie Ambler, Product Management
+
+* **Contributors** - Tammy Bednar, Product Management
+
+* **Last Updated By** - Leo Alvarado, Product Management, September 2023.

exadata-database-service-dedicated/configure-notifications/configure-notifications.md

@@ -0,0 +1,127 @@
+
+
+
+# Configure Notifications for Enabled OCPU or License Type change
+
+
+## Introduction
+
+This lab walks you through the steps to configure notifications to get notified for VM Cluster Event Types such as Enabled OCPU or License Type change.
+
+Estimated Lab Time: 15 minutes
+
+<!-- Watch the video below for a quick walk-through of the lab.
+[Create an Exadata Database Service on Cloud@Customer Infrastructure](youtube:DCrivNA5bs8)
+-->
+### Objectives
+
+-   After completing this lab, you should be able to configure notifications and events rules for Exadata Database Service on Cloud@Customer
+
+### Prerequisites
+
+This lab requires completion of the following:
+
+* Completion of **Lab1**
+
+## Task 1: Configure Notification Topic and Subscription for Enabled OCPU or License Type change
+
+1. Open the navigation menu and click **Developer Services**. Under **Application Integration**, click **Notifications**.
+
+   ![Navigate to Notifications](./images/navigate-notifications.png " ")
+
+2. **Topics** page is selected by default, select your ***Assigned Compartment*** and Click **Create Topic**.
+
+   ![Click Create Topic](./images/create-topic.png " ")
+
+3. Provide the Topic name. For this lab, use ***MyExaDBCCTopic*** for the Topic name. 
+
+   ![Provide Topic display name and Create Topic](./images/create-topic-name.png " ")
+
+4. Click **Create**.
+
+   ![Click Create Topic](./images/click-create-topic.png " ")
+
+   Once Topic has been created you will see the created Topic with the state of ***Active***
+
+   ![Display Topic Status](./images/create-topic-active.png " ")
+
+5. Click the name of the Topic you created to open the **Topic Details** page 
+
+   ![Click on Created Topic](./images/click-on-created-topic.png " ")
+
+6. On the Topic Details page, click **Create Subscription**.
+
+   ![Click Create Subscription](./images/create-subscriptions.png " ")
+
+7. In the Create Subscription panel, for **Protocol**, select ***Email***. Provide your ***assigned Email Address*** then Click **Create**
+
+   ![Create Subscription](./images/click-create-subscription.png " ")
+
+    >**Note:** Notifications creates the email subscription and sends a confirmation URL to your assigned email address. 
+   
+   The subscription is ***pending*** until confirmation is received
+
+   ![Subscription Pending Status](./images/subscription-pending-status.png " ")
+
+8. Open your assigned Email, Check for the ***OCI Notifications Service Subscription Confirmation*** email and Click on the ***Confirm subscription*** link
+
+   ![Confirm Subscription](./images/confirm-subscription.png " ")
+
+   By clicking the confirmation link, it will launch a browser displaying subscription has been confirmed and that you have subscribed your assigned Email to the Topic you have selected. 
+
+   ![Subscription Confirmation Display](./images/subscription-confirmation-page.png " ")
+
+   You can now see the subscription is now ***Active*** 
+
+    ![Subscription Active](./images/subscription-active.png " ")
+
+
+## Task 2: Create Events Rule to create notification automation based on Enabled OCPU or License Type change 
+
+1. Open the navigation menu and click **Observability & Management**. Under **Events Service**, click **Rules**.
+
+    ![Navigate Rules in OCI Console](./images/navigate-rules.png " ")
+
+2. Select your ***Assigned Compartment*** and Click **Create Rule**
+
+    ![Click Create Rule](./images/click-create-rule.png " ")
+
+3. In the Create Rule panel, provide the Rule name. For this lab, use ***MyExaDBCCEventsRule***.
+
+    ![Create Events Rule](./images/create-events-rule.png " ")
+
+4. Configure **Rule Conditions**:
+
+      * In the **Rule Conditions** section, For Condition, Select ***Event Type***. 
+      * For **Service Name**, select ***Database*** 
+      * For **Event Type**, Select ***VM Cluster - Update Begin*** and ***VM Cluster - Update End***
+
+    ![Configure Rule Conditions](./images/configure-rule-conditions.png " ")
+
+5. Configure **Actions**:
+
+      * In the **Actions** section, For **Action Type**, Select ***Notifications***. 
+      * For **Notifications Compartment**, select your ***Assigned Compartment*** 
+      * For **Topic**, Select ***MyExaDBCCTopic*** 
+
+    ![Configure Actions](./images/configure-actions.png " ")
+
+6. Click **Create Rule**
+
+    ![Create Rule](./images/create-rule.png " ")
+
+
+
+You may now **proceed to the next lab**
+
+## Learn More
+
+* Click [here](https://docs.oracle.com/en/engineered-systems/exadata-cloud-at-customer/ecccm/ecc-customer-events.html#GUID-1BDBB213-B153-48F9-BE06-D85CAD6386B8) to learn more about Exadata Database Service on Cloud@Customer Events.
+
+## Acknowledgements
+
+* **Author** - Leo Alvarado, Eddie Ambler, Product Management
+
+* **Contributors** - Tammy Bednar, Product Management
+
+* **Last Updated By** - Leo Alvarado, Product Management, September 2023.

exadata-database-service-dedicated/create-database-custom-image/create-database-custom-image.md

@@ -0,0 +1,92 @@
+# Create Application and Database Custom Image using OCI Console
+
+
+## Introduction
+
+This lab walks you through creating Application and Database Custom Image using the OCI Console. 
+
+  * **Database software images** are resources containing Oracle Database software used to provision and patch Oracle Databases and Oracle Database Homes.
+  * **Database software images** are either **Oracle-published software releases** or **custom software images you create**.
+  * **Custom Database Software Images** include specified patches and updates that meet your organization's standards.
+
+Estimated Time: 10 minutes
+
+Watch the video below for a quick walk-through of the lab.
+  [Create a Custom Database Software Image](youtube:jwxxIih3brQ)
+
+### Objectives
+
+-   After completing this lab, you should be able to create application and database custom image using the OCI Console.
+
+
+### Prerequisites
+
+This lab requires the completion of the following:
+
+* Completion of **Lab1**
+
+## Task 1: Create Application Custom Image using OCI Console
+
+1. Open the navigation menu and click **Compute**. Under Compute, click **Instances**.
+
+  ![Naviage OCI Compute](./images/navigate-compute-instance.png" ")
+
+2. In the left rail, **Instances** is selected by default. Select your assigned compartment named ***MyCompartmentXX***. 
+
+   Click on the name of your **Assigned Custom Application Server** named ***MyCustomAppServer***.
+
+  ![Click MyCustomAppServer Instance](./images/click-create-instance.png" ")
+
+3. Click **More Actions**, and then click **Create custom image**.
+
+  ![Create Custom App Server More Actions](./images/click-instance-more-actions.png " ")
+
+4. In the **Create in compartment** list, Select your assigned compartment ***MyCompartmentXX***
+
+   Enter a **Name** for the image. For this lab, use the name ***MyCustomAppServerImage***
+
+   ![Create Custom App Server Image](./images/create-custom-app-image.png " ")
+
+5. Click **Create custom image**.
+
+
+## Task 2: Create Custom Database Software Image using OCI Console
+
+1. Open the navigation menu. Under **Oracle Database**, click **Exadata Database Service on Cloud@Customer**.
+
+2. Under **Resources**, click **Database Software Images**.
+
+3. Click **Create Database Software Image**.
+
+    ![Create Custom Database Software Image](./images/create-custom-dbsw.png " ")
+
+4. In the **Display name** field, provide a name for your database software image. For this lab, use the name ***MyCustomDBimage***
+
+5. Choose your **assigned compartment** ***MyCompartmentXX***. 
+
+    ![Create Custom Database Software Image](./images/create-dbsw-page.png " ")
+
+6. Choose the **Database version** for your image. For this workshop, select the ***19c*** version.
+
+7. Choose the **patch set update, proactive bundle patch, or release update**. For this workshop, choose ***19.18.0.0***
+
+8. Click **Create Database Software Image**.
+
+    ![Create Custom Database Software Image Dialog Page](./images/create-dbsw-version-page.png " ")
+
+You may now **proceed to the next lab**. 
+
+<!--
+## Learn More
+
+* Click [here](https://docs.public.oneportal.content.oci.oraclecloud.com/en-us/iaas/exadata/doc/ecc-create-first-db.html) to learn more about Creating an Oracle Database on Exadata Database Service.
+
+-->
+
+## Acknowledgements
+
+* **Author** - Leo Alvarado, Eddie Ambler, Product Management
+
+* **Contributors** - Tammy Bednar, Product Management
+
+* **Last Updated By** - Leo Alvarado, Product Management, September 2023.