Ender3 V2/S1 Professional Firmware 20220716

Universal 20220716 MID-YEAR release

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What's new in this release

• New custom G-code C810 for setting up the toolbar shortcuts
• Enhanced C104
• Editable multiple probing
• Increase step limit to 1999.9
• Screen backlight turns on by rotating the knob encoder
• Automatic recalculation of Mesh insets
• Make PID Plot optional to save flash memory (needs recompile)
• Editable Juntion Deviation (needs recompile with HAS_JUNCTION_DEVIATION)
• Editable Linear advance K parameter (needs recompile with LIN_ADVANCE)
• Host shutdown menu item (needs recompile with HOST_SHUTDOWN_MENU_ITEM enabled)
• Some bugs fixed
• Merged Bugfix 2.1.x branch

Ender3 V2/S1 Professional Firmware 20220527

Universal 20220527 Maintenance release

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What's new in this release

• Improved mesh tilting algorithm.
• A new custom G-code C104 U1 T### to unlock the hotend maximum temperature to ###°C (CAUTION)
• Fix a little cosmetic bug in Advanced Pause (change filament)
• Some status messages clear by themselves after 30 s
• Increase small movements (0.01mm) accuracy
• Increase G30 Z precision
• Enhanced Edit Mesh menu
• Enhanced redraw menu while an item is being edited
• Add M503 support for Custom G-codes
• Better calculus of probing area for the bed tramming wizard
• Enhanced Smart Fill Mesh
• Validation of the UBL mesh when it is loaded (through menu or G-code)
• Debugging thumbnail data validation messages
• New BLTouch reset item in Probe settings menu
• Automatic mesh inset and park head position corrections after load settings and change physical parameters
• Support for Ender-3 S1F4 and Ender-3 V2 SKRMINI-E3V3 (needs a screen adapter)
• Merged the latest Marlin bugfix

Ender3 V2/S1 Professional Firmware 20220419

Universal APRIL 2022 Edition

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What's new in this release

• New toolbar with 11 configurable shortcuts actions.
• New Advanced / Mesh Leveling menu
• Versions with extended UBL support (tilt, smart fill, multiple slots, etc.)
• Mesh editor for fine tuning
• Automatic maximize leveling area
• Automatic center leveling area
• Menu item for setting the default mesh fade height
• Consolidates firmware retract options in a submenu
• Support in source code of control menus for LED lights as the Neopixel
• Improves g-code preview stability
• Experimental support for Ender3S1-STM32F401RCT6

Ender3 V2/S1 Professional Firmware 20220330

Universal Edition Maintenance Release IV

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What's new in this release

• Refactor of Z offset wizard
• Refactor of Bed Tramming wizard
• Moved bed tramming wizard and full manual tramming at top of bed tramming menu
• Z Home and Disable motors for Manual Mesh version
• Firmware retracts: User configurable Additional Recover
• Turn off back-light in Advanced menu

Ender3 V2/S1 Professional Firmware 20220314

Universal Edition - Maintenance release III

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What's new in this release

• Better compatibility with DACAI screens
• Increases axes speeds
• Increases editing limits for axes speed and acceleration
• Fix incompatibility with BILINEAR_SUBDIVISION
• Fix bug: Printer hangs if g-code file has an incompatible thumbnail
• Some minor fixes
• Merge latest Marlin Bugfix

Place holder

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

Ender3 V2/S1 Professional Firmware 20220302 - maintenance release II

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What's new in this release

• Disables THERMAL_PROTECTION_VARIANCE_MONITOR
• Persistent Z-offset for the Manual Mesh Version
• Allows to save the mesh from the mesh viewer
• Fixes bug in the status line, color is always white when the text is large.
• Redraw screen when LCD back light is turned off (work around for clean screen glitches)
• Fixes: C108 does not remove new Mesh viewer Popup
• Fixes: Host can replace filename (8.3) in printing process from SD
• Completes the pins_CREALITY_V24S1_301.h with values from official Creality firmware
• Decrease Z_PROBE_LOW_POINT to -3
• Uses some configuration value from the official Creality source files
• Merge latest Marlin Bugfix

Ender3 V2/S1 Professional Firmware 20220220 - maintenance release

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What was new in this release

• New Tramming Wizard for BL/3D/CRTouch versions
• Deprecates C12 in favor of G30
• Restrict movements for bed tramming
• Merge latest Marlin Bugfix

Ender3 V2/S1 Professional Firmware 20220209 - Bugfix release

Universal Edition - BugFix

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What was new in this release

• Fixed bug in the display initialization routine that prevents the correct color changes when a personal theme was applied.
• Better draw of signed and unsigned numeric formats for DWIN display
• Configurable Bed auto leveling temperature
• Fix software endstops bug (physical settings)
• Shows in status line when a probe position is not reachable
• Allows to set minimum (and negative) axes position by menu and custom g-code (C100)
• Allows to turn off the backlight of the lcd in the tune menu
• Store settings also in Advanced Menu
• Invert Extruder has been moved to Filament settings

Ender3 V2/S1 Professional Firmware

Universal New Year Edition!

This is not the latest version, to get the latest version go here: https://github.com/mriscoc/Ender3V2S1/releases/latest

What was new in this release

• Applied official Bug-fix branch of Marlin
• Universal RCT6/RET6 Ender 3 V2/S1 Support