Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Improvements and fixes for Creality K2 Plus #8154

Merged
merged 1 commit into from
Jan 23, 2025
Merged

Improvements and fixes for Creality K2 Plus #8154

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
1 change: 1 addition & 0 deletions resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -17,6 +17,7 @@
"slow_down_min_speed": [
"20"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -17,6 +17,7 @@
"slow_down_min_speed": [
"20"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,7 @@
"fan_min_speed": [
"30"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -50,6 +50,7 @@
"reduce_fan_stop_start_freq": [
"1"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -44,6 +44,7 @@
"reduce_fan_stop_start_freq": [
"1"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -32,6 +32,7 @@
"reduce_fan_stop_start_freq": [
"1"
],
"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
"compatible_printers": [
"Creality K2 Plus 0.2 nozzle",
"Creality K2 Plus 0.4 nozzle",
Expand Down
16 changes: 12 additions & 4 deletions resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
Expand Down Expand Up @@ -91,7 +92,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
Expand All @@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
Expand All @@ -127,12 +135,12 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"scan_first_layer": "0",
"thumbnails_format":"PNG",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
Expand Down
20 changes: 14 additions & 6 deletions resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
Expand Down Expand Up @@ -91,13 +92,13 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"0.5"
"0.8"
],
"retract_length_toolchange": [
"0"
Expand All @@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
Expand All @@ -120,19 +128,19 @@
"0.4"
],
"wipe_distance": [
"1"
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "0",
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"scan_first_layer": "0",
"thumbnails_format":"PNG",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
Expand Down
16 changes: 12 additions & 4 deletions resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
Expand Down Expand Up @@ -91,7 +92,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
Expand All @@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
Expand All @@ -127,7 +135,7 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
Expand All @@ -137,4 +145,4 @@
"300x300",
"96x96"
]
}
}
18 changes: 13 additions & 5 deletions resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -20,9 +20,10 @@
],
"printable_height": "350",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
Expand Down Expand Up @@ -91,7 +92,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"70%"
Expand All @@ -108,7 +109,14 @@
"deretraction_speed": [
"40"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"349"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
Expand All @@ -127,14 +135,14 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"scan_first_layer": "0",
"thumbnails_format":"PNG",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
]
}
}
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "350",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.25",
"inner_wall_speed": "150",
"wall_loops": "4",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.82",
"inner_wall_speed": "150",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "300",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "30",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "200",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.82",
"inner_wall_speed": "150",
"wall_loops": "2",
Expand Down
1 change: 1 addition & 0 deletions resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"only_one_wall_top": "1",
"precise_outer_wall": "1",
"inner_wall_line_width": "0.65",
"inner_wall_speed": "150",
"wall_loops": "2",
Expand Down
Loading
Loading