sim.tar

sim/0000700005644400000240000000000011715057306010146 5ustar  tmsgradsim/misc/0000700005644400000240000000000011715057306011101 5ustar  tmsgradsim/misc/Makefile0000700005644400000240000000232311555603106012541 0ustar  tmsgradCC=gcc
CFLAGS=-Wall -O2
LCFLAGS=-O2
LEX = flex
YACC=bison
LEXLIB = -lfl
YAS=./yas

all: yis yas hcl2c

# These are implicit rules for making .yo files from .ys files.
# E.g., make sum.yo
.SUFFIXES: .ys .yo
.ys.yo:
	$(YAS) $*.ys

# These are the explicit rules for making yis yas and hcl2c and hcl2v
yas-grammar.o: yas-grammar.c
	$(CC) $(LCFLAGS) -c yas-grammar.c

yas-grammar.c: yas-grammar.lex
	$(LEX) yas-grammar.lex
	mv lex.yy.c yas-grammar.c

isa.o: isa.c isa.h
	$(CC) $(CFLAGS) -c isa.c

yas.o: yas.c yas.h isa.h
	$(CC) $(CFLAGS) -c yas.c

yas: yas.o yas-grammar.o isa.o
	$(CC) $(CFLAGS) yas-grammar.o yas.o isa.o ${LEXLIB} -o yas

yis.o: yis.c isa.h
	$(CC) $(CFLAGS) -c yis.c

yis: yis.o isa.o
	$(CC) $(CFLAGS) yis.o isa.o -o yis

hcl2c: hcl.tab.c lex.yy.c node.c outgen.c
	$(CC) $(LCFLAGS) node.c lex.yy.c hcl.tab.c outgen.c -o hcl2c

hcl2v: hcl.tab.c lex.yy.c node.c outgen.c
	$(CC) $(LCFLAGS) -DVLOG node.c lex.yy.c hcl.tab.c outgen.c -o hcl2v

hcl2u: hcl.tab.c lex.yy.c node.c outgen.c
	$(CC) $(LCFLAGS) -DUCLID node.c lex.yy.c hcl.tab.c outgen.c -o hcl2u

lex.yy.c: hcl.lex
	$(LEX) hcl.lex

hcl.tab.c: hcl.y
	$(YACC) -d hcl.y

clean:
	rm -f *.o *.yo *.exe yis yas hcl2c mux4 *~ core.* 
	rm -f hcl.tab.c hcl.tab.h lex.yy.c


sim/misc/README0000700005644400000240000000366111336105047011765 0ustar  tmsgrad/***********************************************************************
 * Y86 Assembler, Instruction Simulator, and HCL translator
 *
 * Copyright (c) 2002, R. Bryant and D. O'Hallaron, All rights reserved.
 * May not be used, modified, or copied without permission.
 ***********************************************************************/ 

This directory contains all of the source files for the following:

YAS	Y86 assembler
YIS	Y86 instruction level simulator
HCL2C	HCL to C translator
HCL2V	HCL to Verilog translator

*********************
1. Building the tools
*********************

unix> make clean
unix> make

********
2. Files
********

Makefile		Builds yas, yis, hcl2c, hcl2v
README			This file

* Versions of Makefile in the student's distribution
* (Instructor distribution only)
Makefile-sim	

* Example programs for Part A of the CS:APP Architecture Lab
examples.c		C versions of three Y86 functions 
ans-copy.ys		Solution copy function (instructor distribution only)
ans-sum.ys		Solution sum function (instructor distribution only)
ans-rsum.ys		Solution rsum function (instructor distribution only)


* Instruction simulator code shared by yas, yis, ssim, ssim+, and psim
isa.c		
isa.h

* Files used to build the yas assembler
yas			The YAS binary
yas.c			yas source file and header file
yas.h
yas-grammar.lex		Y86 lexical scanner spec
yas-grammar.c		Lexical scanner generated from yas-grammar.lex

* Files used to build the yis instruction simulator
yis			The YIS binary
yis.c			yis source file

* Files used to build the hcl2c translator
hcl2c			The HCL2C binary
node.c			auxiliary routines and header file
node.h
hcl.lex			HCL lexical scanner spec
lex.yy.c		HCL lexical scanner generated from hcl.lex
hcl.y			HCL grammar
hcl.tab.c		HCL parser generated from hcl.y
hcl.tab.h		Token definitions

* Example HCL programs used during the writing of the CS:APP book
* (Instructor distribution only)
frag.{hcl,c}
mux4.{hcl,c}
reg-file.{hcl,c}
test.hcl


sim/misc/node.c0000700005644400000240000003571311244401202012167 0ustar  tmsgrad/* Functions to generate C or Verilog code from HCL */
/* This file maintains a parse tree representation of expressions */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <ctype.h>

#include "node.h"
#include "outgen.h"

#define MAXBUF 1024

void yyerror(const char *str);
void yyserror(const char *str, char *other);

/* For error reporting */
static char* show_expr(node_ptr expr);

/* The symbol table */
#define SYM_LIM 100
static node_ptr sym_tab[2][SYM_LIM];
static int sym_count = 0;

/* Optional simulator name */
char simname[MAXBUF] = "";

#ifdef UCLID
int annotate = 0;
/* Keep list of argument names encountered in node definition */
char *arg_names[SYM_LIM];
int arg_cnt = 0;
#endif


extern FILE *outfile;

/*
 * usage - print helpful diagnostic information
 */
static void usage(char *name)
{
#ifdef VLOG
    fprintf(stderr, "Usage: %s [-h] < HCL_file  >verilog file\n", name);
    fprintf(stderr, "Output verilog code on stdout.\n");
#else
#ifdef UCLID
    fprintf(stderr, "Usage: %s [-ah] < HCL_file  >uclid file\n", name);
    fprintf(stderr, "Output uclid code on stdout.\n");
#else /* !UCLID */
    fprintf(stderr, "Usage: %s [-h] < HCL_file  >C file\n", name);
    fprintf(stderr, "Output C file on stdout.\n");
    fprintf(stderr, "   -a     Add define/use annotations\n");
#endif /* UCLID */
#endif /* VLOG */
    fprintf(stderr, "   -h     Print this message\n");
    exit(0);
}


/* Initialization */
void init_node(int argc, char **argv)
{
    int c;
    int max_column = 75;
    int first_indent = 4;
    int other_indents = 2;

    /* Parse the command line arguments */
    while ((c = getopt(argc, argv, "hna")) != -1) {
	switch(c) {
	case 'h':
	    usage(argv[0]);
	    break;
	case 'n': /* Optional simulator name */
	    strcpy(simname, argv[optind]);
	    break;
#ifdef UCLID
	case 'a':
	    annotate = 1;
	    break;
#endif
	default:
	    printf("Invalid option '%c'\n", c);
	    usage(argv[0]);
	    break;
	}
    }

#if !defined(VLOG) && !defined(UCLID)
    /* Define and initialize the simulator name */
    if (!strcmp(simname, "")) 
	printf("char simname[] = \"Y86 Processor\";\n");
    else
	printf("char simname[] = \"Y86 Processor: %s\";\n", simname);
#endif
    outgen_init(outfile, max_column, first_indent, other_indents);
}

static void add_symbol(node_ptr name, node_ptr val)
{
    if (sym_count >= SYM_LIM) {
	yyerror("Symbol table limit exceeded");
	return;
    }
    sym_tab[0][sym_count] = name;
    sym_tab[1][sym_count] = val;
    sym_count++;
}


static char *node_names[] =
  {"quote", "var", "num", "and", "or", "not", "comp", "ele", "case"};

static void show_node(node_ptr node)
{
    printf("Node type: %s, Boolean ? %c, String value: %s\n",
	   node_names[node->type], node->isbool ? 'Y':'N', node->sval);
}


void finish_node(int check_ref)
{
    if (check_ref) {
	int i;
	for (i = 0; i < sym_count; i++)
	    if (!sym_tab[0][i]->ref) {
		fprintf(stderr, "Warning, argument '%s' not referenced\n",
			sym_tab[0][i]->sval);
	    }
    }
}

static node_ptr find_symbol(char *name)
{
    int i;
    for (i = 0; i < sym_count; i++) {
	if (strcmp(name, sym_tab[0][i]->sval) == 0) {
	    node_ptr result = sym_tab[1][i];
	    sym_tab[0][i]->ref++;
	    return result;
	}
    }
    yyserror("Symbol %s not found", name);
    return NULL;
}

#ifdef UCLID
/* See if string should be considered argument.
   Currently, omit strings that are all upper case */
static int is_arg(char *name)
{
    int upper = 1;
    int c;
    while ((c=*name++) != '\0')
	upper = upper && isupper(c);
    return !upper;
}

/* See if string is part of current argument list */
static void check_for_arg(char *name)
{
    int i;
    if (!is_arg(name))
	return;
    for (i = 0; i < arg_cnt; i++)
	if (strcmp(arg_names[i], name) == 0)
	    return;
    arg_names[arg_cnt++] = name;
}
#endif

static node_ptr new_node(node_type_t t, int isbool,
			 char *s, node_ptr a1, node_ptr a2)
{
    node_ptr result = malloc(sizeof(node_rec));
    result->type = t;
    result->isbool = isbool;
    result->sval = s;
    result->arg1 = a1;
    result->arg2 = a2;
    result->ref = 0;
    result->next = NULL;
    return result;
}

/* Concatenate two lists */
node_ptr concat(node_ptr n1, node_ptr n2)
{
    node_ptr tail = n1;
    if (!n1)
	return n2;
    while (tail->next)
	tail = tail->next;
    tail->next = n2;
    return n1;
}

static void free_node(node_ptr n)
{
    free(n->sval);
    free(n);
}

node_ptr make_quote(char *qstring)
{

    /* Quoted string still has quotes around it */
    int len = strlen(qstring)-2;
    char *sname = malloc(len+1);
    strncpy(sname, qstring+1, len);
    sname[len] = '\0';
    return new_node(N_QUOTE, 0, sname, NULL, NULL);
}

node_ptr make_var(char *name)
{
    char *sname = malloc(strlen(name)+1);
    strcpy(sname, name);
    /* Initially assume var is not Boolean */
    return new_node(N_VAR, 0, sname, NULL, NULL);
}

node_ptr make_num(char *name)
{
    char *sname = malloc(strlen(name)+1);
    strcpy(sname, name);
    return new_node(N_NUM, 0, sname, NULL, NULL);
}

void set_bool(node_ptr varnode)
{
    if (!varnode)
	yyerror("Null node encountered");
    varnode->isbool = 1;
}

/* Make sure argument is OK */
static int check_arg(node_ptr arg, int wantbool)
{
    if (!arg) {
	yyerror("Null node encountered");
	return 0;
    }
    if (arg->type == N_VAR) {
	node_ptr qval = find_symbol(arg->sval);
	if (!qval) {
	    yyserror("Variable '%s' not found", arg->sval);
	    return 0;
	}
	if (wantbool != qval->isbool) {
	    if (wantbool)
		yyserror("Variable '%s' not Boolean", arg->sval);
	    else
		yyserror("Variable '%s' not integer", arg->sval);
	    return 0;
	}
	return 1;
    }
    if (arg->type == N_NUM) {
        if (wantbool && strcmp(arg->sval,"0") != 0 &&
	    strcmp(arg->sval,"1") != 0) {
	    yyserror("Value '%s' not Boolean", arg->sval);
	    return 0;
        }
	return 1;
    }
    if (wantbool && !arg->isbool)
	yyserror("Non Boolean argument '%s'", show_expr(arg));
    if (!wantbool && arg->isbool)
	yyserror("Non integer argument '%s'", show_expr(arg));
    return (wantbool == arg->isbool);
}

node_ptr make_not(node_ptr arg)
{
    check_arg(arg, 1);
    return new_node(N_NOT, 1, "!", arg, NULL);
}

node_ptr make_and(node_ptr arg1, node_ptr arg2)
{
    check_arg(arg1, 1);
    check_arg(arg2, 1);
    return new_node(N_AND, 1, "&", arg1, arg2);
}

node_ptr make_or(node_ptr arg1, node_ptr arg2)
{
    check_arg(arg1, 1);
    check_arg(arg2, 1);
    return new_node(N_OR, 1, "|", arg1, arg2);
}

node_ptr make_comp(node_ptr op, node_ptr arg1, node_ptr arg2)
{
    check_arg(arg1, 0);
    check_arg(arg2, 0);
    return new_node(N_COMP, 1, op->sval, arg1, arg2);
}

node_ptr make_ele(node_ptr arg1, node_ptr arg2)
{
    node_ptr ele;
    check_arg(arg1, 0);
    for (ele = arg1; ele; ele = ele->next)
	check_arg(ele, 0);
    return new_node(N_ELE, 1, "in", arg1, arg2);
}

node_ptr make_case(node_ptr arg1, node_ptr arg2)
{
    check_arg(arg1, 1);
    check_arg(arg2, 0);
    return new_node(N_CASE, 0, ":", arg1, arg2);
}

void insert_code(node_ptr qstring)
{
    if (!qstring)
	yyerror("Null node");
    else {
#if !defined(VLOG) && !defined(UCLID)
	fputs(qstring->sval, outfile);
	fputs("\n", outfile);
#endif
    }
}

void add_arg(node_ptr var, node_ptr qstring, int isbool)
{
    if (!var || !qstring) {
	yyerror("Null node");
	return;
    }
    add_symbol(var, qstring);
    if (isbool) {
	set_bool(var);
	set_bool(qstring);
    }
}

static char expr_buf[1024];
static int errlen = 0;
#define MAXERRLEN 80

/* Recursively display expression for error reporting */
static void show_expr_helper(node_ptr expr)
{
    switch(expr->type) {
	int len;
	node_ptr ele;
    case N_QUOTE:
	len = strlen(expr->sval) + 2;
	if (len + errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "'%s'", expr->sval);
	    errlen += len;
	}
	break;
    case N_VAR:
	len = strlen(expr->sval);
	if (len + errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, expr->sval);
	    errlen += len;
	}
	break;
    case N_NUM:
	len = strlen(expr->sval);
	if (len + errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, expr->sval);
	    errlen += len;
	}
	break;
    case N_AND:
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "(");
	    errlen+=1;
	    show_expr_helper(expr->arg1);
	    sprintf(expr_buf+errlen, " & ");
	    errlen+=3;
	}
	if (errlen < MAXERRLEN) {
	    show_expr_helper(expr->arg2);
	    sprintf(expr_buf+errlen, ")");
	    errlen+=1;
	}
	break;
    case N_OR:
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "(");
	    errlen+=1;
	    show_expr_helper(expr->arg1);
	    sprintf(expr_buf+errlen, " | ");
	    errlen+=3;
	}
	if (errlen < MAXERRLEN) {
	    show_expr_helper(expr->arg2);
	    sprintf(expr_buf+errlen, ")");
	    errlen+=1;
	}
	break;
    case N_NOT:
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "!");
	    errlen+=1;
	    show_expr_helper(expr->arg1);
	}
	break;
    case N_COMP:
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "(");
	    errlen+=1;
	    show_expr_helper(expr->arg1);
	    sprintf(expr_buf+errlen, " %s ", expr->sval);
	    errlen+=4;
	}
	if (errlen < MAXERRLEN) {
	    show_expr_helper(expr->arg2);
	    sprintf(expr_buf+errlen, ")");
	    errlen+=1;
	}
	break;
    case N_ELE:
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "(");
	    errlen+=1;
	    show_expr_helper(expr->arg1);
	    sprintf(expr_buf+errlen, " in {");
	    errlen+=5;
	}
	for (ele = expr->arg2; ele; ele=ele->next) {
	    if (errlen < MAXERRLEN) {
		show_expr_helper(ele);
		if (ele->next) {
		    sprintf(expr_buf+errlen, ", ");
		    errlen+=2;
		}
	    }
	}
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "})");
	    errlen+=2;
	}
	break;
    case N_CASE:
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "[ ");
	    errlen+=2;
	}
	for (ele = expr; errlen < MAXERRLEN && ele; ele=ele->next) {
	    show_expr_helper(ele->arg1);
	    sprintf(expr_buf+errlen, " : ");
	    errlen += 3;
	    show_expr_helper(ele->arg2);
	}
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, " ]");
	    errlen+=2;
	}
	break;
    default:
	if (errlen < MAXERRLEN) {
	    sprintf(expr_buf+errlen, "??");
	    errlen+=2;
	}
	break;
    }
}

static char *show_expr(node_ptr expr)
{
    errlen = 0;
    show_expr_helper(expr);
    if (errlen >= MAXERRLEN)
	sprintf(expr_buf+errlen, "...");
    return expr_buf;
}

/* Recursively generate code for function */
static void gen_expr(node_ptr expr)
{
    node_ptr ele;
    switch(expr->type) {
    case N_QUOTE:
	yyserror("Unexpected quoted string", expr->sval);
	break;
    case N_VAR:
	{
	    node_ptr qstring = find_symbol(expr->sval);
	    if (qstring)
#if defined(VLOG) || defined(UCLID)
		outgen_print("%s", expr->sval);
#else
		outgen_print("(%s)", qstring->sval);
#endif
	    else
		yyserror("Invalid variable '%s'", expr->sval);
#ifdef UCLID
	    check_for_arg(expr->sval);
#endif
	    
	}
	break;
    case N_NUM:
#ifdef UCLID
      {
	int val = atoi(expr->sval);
	if (val < -1)
	  outgen_print("pred^%d(CZERO)", -val);
	else if (val == -1)
	  outgen_print("pred(CZERO)");
	else if (val == 0)
	  outgen_print("CZERO");
	else if (val == 1)
	  outgen_print("succ(CZERO)");
	else
	  outgen_print("succ^%d(CZERO)", val);
      }
#else /* !UCLID */
 	fputs(expr->sval, outfile);
#endif /* UCLID */
	break;
    case N_AND:
	outgen_print("(");
	outgen_upindent();
	gen_expr(expr->arg1);
	outgen_print(" & ");
	gen_expr(expr->arg2);
	outgen_print(")");
	outgen_downindent();
	break;
    case N_OR:
	outgen_print("(");
	outgen_upindent();
	gen_expr(expr->arg1);
	outgen_print(" | ");
	gen_expr(expr->arg2);
	outgen_print(")");
	outgen_downindent();
	break;
    case N_NOT:
#if defined(VLOG) || defined(UCLID)
	outgen_print("~");
#else
	outgen_print("!");
#endif
	gen_expr(expr->arg1);
	break;
    case N_COMP:
	outgen_print("(");
	outgen_upindent();
	gen_expr(expr->arg1);
#ifdef UCLID
	{
	  char *cval = expr->sval;
	  if (strcmp(cval, "==") == 0)
	    cval = "=";
	  outgen_print(" %s ", cval);
	}
#else /* !UCLID */
	outgen_print(" %s ", expr->sval);
#endif /* UCLID */
	gen_expr(expr->arg2);
	outgen_print(")");
	outgen_downindent();
	break;
    case N_ELE:
	outgen_print("(");
	outgen_upindent();
	for (ele = expr->arg2; ele; ele=ele->next) {
	    gen_expr(expr->arg1);
#ifdef UCLID
	    outgen_print(" = ");
#else
	    outgen_print(" == ");
#endif
	    gen_expr(ele);
	    if (ele->next)
#if defined(VLOG) || defined(UCLID)
		outgen_print(" | ");
#else
		outgen_print(" || ");
#endif
	}
	outgen_print(")");
	outgen_downindent();
	break;
    case N_CASE:
#ifdef UCLID
      outgen_print("case");
      outgen_terminate();
      {
	  /* Use this to keep track of last case when no default is given */
	  node_ptr last_arg2 = NULL;
	  for (ele = expr; ele; ele=ele->next) {
	      outgen_print("      ");
	      if (ele->arg1->type == N_NUM && atoi(ele->arg1->sval) == 1) {
		  outgen_print("default");
		  last_arg2 = NULL;
	      }
	      else {
		  gen_expr(ele->arg1);
		  last_arg2 = ele->arg2;
	      }
	      outgen_print(" : ");
	      gen_expr(ele->arg2);
	      outgen_print(";");
	      outgen_terminate();
	  }
	  if (last_arg2) {
	      /* Use final case as default */
	      outgen_print("      default : ");
	      gen_expr(last_arg2);
	      outgen_print(";");
	      outgen_terminate();
	  }
      }
      outgen_print("    esac");
#else /* !UCLID */
	outgen_print("(");
	outgen_upindent();
	int done = 0;
	for (ele = expr; ele && !done; ele=ele->next) {
	  if (ele->arg1->type == N_NUM && atoi(ele->arg1->sval) == 1) {
	    gen_expr(ele->arg2);
	    done = 1;
	  } else {
	    gen_expr(ele->arg1);
	    outgen_print(" ? ");
	    gen_expr(ele->arg2);
	    outgen_print(" : ");
	  }
	}
	if (!done)
	  outgen_print("0");
	outgen_print(")");
	outgen_downindent();
#endif
	break;
    default:
	yyerror("Unknown node type");
	break;
    }
}


/* Generate code defining function for var */
void gen_funct(node_ptr var, node_ptr expr, int isbool)
{
    if (!var || !expr) {
	yyerror("Null node");
	return;
    }
    check_arg(expr, isbool);
#ifdef VLOG
    outgen_print("assign %s = ", var->sval);
    outgen_terminate();
    outgen_print("    ");
    gen_expr(expr);
    outgen_print(";");
    outgen_terminate();
    outgen_terminate();
#else /* !VLOG */
#ifdef UCLID
    if (annotate) {
	/* Print annotation information*/
	outgen_print("(* $define %s *)", var->sval);
	outgen_terminate();
    }
    outgen_print("%s := ", var->sval);
    outgen_terminate();
    outgen_print("    ");
    if (isbool && expr->type == N_NUM) {
      outgen_print("%d", atoi(var->sval));
    } else
      gen_expr(expr);
    outgen_print(";");
    outgen_terminate();
    if (annotate) {
	int i;
	outgen_print("(* $args");
	for (i = 0; i < arg_cnt; i++)
	    outgen_print("%c%s", i == 0 ? ' ' : ':', arg_names[i]);
	outgen_print(" *)");
	outgen_terminate();
	arg_cnt = 0;
    }
    outgen_terminate();
#else /* !UCLID */
    /* Print function header */
    outgen_print("int gen_%s()", var->sval);
    outgen_terminate();
    outgen_print("{");
    outgen_terminate();
    outgen_print("    return ");
    gen_expr(expr);
    outgen_print(";");
    outgen_terminate();
    outgen_print("}");
    outgen_terminate();
    outgen_terminate();
#endif /* UCLID */
#endif /* VLOG */
}
sim/misc/node.h0000700005644400000240000000212410331500024012160 0ustar  tmsgrad#ifndef NODE_H
typedef enum { N_QUOTE, N_VAR, N_NUM, N_AND, N_OR, N_NOT, N_COMP, N_ELE, N_CASE } node_type_t;

typedef struct NODE {
    node_type_t type;
    int isbool;  /* Is this node a Boolean expression? */
    char *sval;
    struct NODE *arg1;
    struct NODE *arg2;
    int ref;     /* For var, how many times has it been referenced? */
    struct NODE *next;
} node_rec, *node_ptr;

void init_node(int argc, char **argv);
void finish_node(int check_ref);

node_ptr make_quote(char *qstring);
node_ptr make_var(char *name);
node_ptr make_num(char *name);
void set_bool(node_ptr varnode);
node_ptr make_not(node_ptr arg);
node_ptr make_and(node_ptr arg1, node_ptr arg2);
node_ptr make_or(node_ptr arg1, node_ptr arg2);
node_ptr make_comp(node_ptr op, node_ptr arg1, node_ptr arg2);
node_ptr make_ele(node_ptr arg1, node_ptr arg2);
node_ptr make_case(node_ptr arg1, node_ptr arg2);

node_ptr concat(node_ptr n1, node_ptr n2);

void insert_code(node_ptr qstring);
void add_arg(node_ptr var, node_ptr qstring, int isbool);
void gen_funct(node_ptr var, node_ptr expr, int isbool);
#define NODE_H
#endif

sim/misc/outgen.c0000700005644400000240000000267611244047746012570 0ustar  tmsgrad#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>

#include "outgen.h"
/* Output generator that ensures no line exceeds specified number of columns */

#define STRING_LENGTH 1024

FILE *outfile = NULL;
int max_column = 80;
int first_indent = 4;
int other_indents = 2;
int cur_pos = 0;
int indent = 0;


/* Controlling parameters */
void outgen_init(FILE *arg_outfile, int arg_max_column, int arg_first_indent, int arg_other_indents) {
  outfile = arg_outfile;
  max_column = arg_max_column;
  first_indent = arg_first_indent;
  other_indents = arg_other_indents;
  cur_pos = 0;
  indent = first_indent;
}

static void print_token(char *string) {
  if (outfile == NULL)
    outfile = stdout;
  int len = strlen(string);
  int i;
  if (len+cur_pos > max_column) {
    fprintf(outfile, "\n");
    for (i = 0; i < indent; i++)
      fprintf(outfile, " ");
    cur_pos = indent;
  }
  fprintf(outfile, string);
  cur_pos += len;
}


/* Terminate statement and reset indentations */
void outgen_terminate() {
  printf("\n");
  cur_pos = 0;
  indent = first_indent;
}

/* Output generator printing */
void outgen_print(char *fmt, ...) {
  char buf[STRING_LENGTH];
  va_list argp;
  va_start(argp, fmt);
  vsprintf(buf, fmt, argp);
  va_end(argp);
  print_token(buf);
}

/* Increase indentation level */
void outgen_upindent() {
  indent += other_indents;
}
/* Decrease indentation level */
void outgen_downindent() {
  indent -= other_indents;
}


sim/misc/outgen.h0000700005644400000240000000071311243641516012555 0ustar  tmsgrad/* Output generator that ensures no line exceeds specified number of columns */

/* Controlling parameters */
void outgen_init(FILE *outfile, int max_column, int first_indent, int other_indents);

/* Terminate statement and reset indentations */
void outgen_terminate();

/* Output generator printing */
void outgen_print(char *fmt, ...);

/* Increase indentation level */
void outgen_upindent();
/* Decrease indentation level */
void outgen_downindent();



sim/misc/mux4.hcl0000700005644400000240000000336311167646055012504 0ustar  tmsgrad#/* $begin sim-mux4-raw-hcl */
## Simple example of an HCL file.
## This file can be converted to C using hcl2c, and then compiled.

## In this example, we will generate the MUX4 circuit shown in
## Section SLASHrefLBRACKsect:arch:hclsetRBRACK.  It consists of a control block that generates
## bit-level signals s1 and s0 from the input signal code,
## and then uses these signals to control a 4-way multiplexor
## with data inputs A, B, C, and D.

## This code is embedded in a C program that reads
## the values of code, A, B, C, and D from the command line
## and then prints the circuit output

## Information that is inserted verbatim into the C file
quote '#include <stdio.h>'
quote '#include <stdlib.h>'
quote 'int code_val, s0_val, s1_val;'
quote 'char **data_names;'

## Declarations of signals used in the HCL description and
## the corresponding C expressions.
boolsig s0 's0_val'
boolsig s1 's1_val'
intsig code 'code_val'
intsig  A 'atoi(data_names[0])'
intsig  B 'atoi(data_names[1])'
intsig  C 'atoi(data_names[2])'
intsig  D 'atoi(data_names[3])'

## HCL descriptions of the logic blocks
quote '/* $begin sim-mux4-s1-c */'
bool s1 = code in { 2, 3 };
quote '/* $end sim-mux4-s1-c */'

bool s0 = code in { 1, 3 };

int Out4 = [
	!s1 && !s0 : A;	# 00
	!s1        : B;	# 01
	!s0        : C;	# 10
	1          : D;	# 11
];

## More information inserted verbatim into the C code to
## compute the values and print the output
quote '/* $begin sim-mux4-main-c */'
quote 'int main(int argc, char *argv[]) {'
quote '  data_names = argv+2;'
quote '  code_val = atoi(argv[1]);'
quote '  s1_val = gen_s1();'
quote '  s0_val = gen_s0();'
quote '  printf("Out = %d\n", gen_Out4());'
quote '  return 0;'
quote '}'
quote '/* $end sim-mux4-main-c */'
#/* $end sim-mux4-raw-hcl */
sim/misc/isa.h0000700005644400000240000001244511515366101012031 0ustar  tmsgrad/* Instruction Set definition for Y86 Architecture */
/* Revisions:
   2009-03-11:
       Changed RNONE to be 0xF
       Changed J_XX and jump_t to C_XX and cond_t; take_branch to cond_holds
       Expanded RRMOVL to include conditional moves
*/

/**************** Registers *************************/

/* REG_NONE is a special one to indicate no register */
typedef enum { REG_EAX, REG_ECX, REG_EDX, REG_EBX,
	       REG_ESP, REG_EBP, REG_ESI, REG_EDI, REG_NONE=0xF, REG_ERR } reg_id_t;

/* Find register ID given its name */
reg_id_t find_register(char *name);
/* Return name of register given its ID */
char *reg_name(reg_id_t id);

/**************** Instruction Encoding **************/

/* Different argument types */
typedef enum { R_ARG, M_ARG, I_ARG, NO_ARG } arg_t;

/* Different instruction types */
typedef enum { I_HALT, I_NOP, I_RRMOVL, I_IRMOVL, I_RMMOVL, I_MRMOVL,
	       I_ALU, I_JMP, I_CALL, I_RET, I_PUSHL, I_POPL,
	       I_IADDL, I_LEAVE, I_POP2 } itype_t;

/* Different ALU operations */
typedef enum { A_ADD, A_SUB, A_AND, A_XOR, A_NONE } alu_t;

/* Default function code */
typedef enum { F_NONE } fun_t;

/* Return name of operation given its ID */
char op_name(alu_t op);

/* Different Jump conditions */
typedef enum { C_YES, C_LE, C_L, C_E, C_NE, C_GE, C_G } cond_t;

/* Pack itype and function into single byte */
#define HPACK(hi,lo) ((((hi)&0xF)<<4)|((lo)&0xF))

/* Unpack byte */
#define HI4(byte) (((byte)>>4)&0xF)
#define LO4(byte) ((byte)&0xF)

/* Get the opcode out of one byte instruction field */
#define GET_ICODE(instr) HI4(instr)

/* Get the ALU/JMP function out of one byte instruction field */
#define GET_FUN(instr) LO4(instr)

/* Return name of instruction given it's byte encoding */
char *iname(int instr);

/**************** Truth Values **************/
typedef enum { FALSE, TRUE } bool_t;

/* Table used to encode information about instructions */
typedef struct {
  char *name;
  unsigned char code; /* Byte code for instruction+op */
  int bytes;
  arg_t arg1;
  int arg1pos;
  int arg1hi;  /* 0/1 for register argument, # bytes for allocation */
  arg_t arg2;
  int arg2pos;
  int arg2hi;  /* 0/1 */
} instr_t, *instr_ptr;

instr_ptr find_instr(char *name);

/* Return invalid instruction for error handling purposes */
instr_ptr bad_instr();

/***********  Implementation of Memory *****************/
typedef unsigned char byte_t;
typedef int word_t;

/* Represent a memory as an array of bytes */
typedef struct {
  int len;
  word_t maxaddr;
  byte_t *contents;
} mem_rec, *mem_t;

/* Create a memory with len bytes */
mem_t init_mem(int len);
void free_mem(mem_t m);

/* Set contents of memory to 0 */
void clear_mem(mem_t m);

/* Make a copy of a memory */
mem_t copy_mem(mem_t oldm);
/* Print the differences between two memories */
bool_t diff_mem(mem_t oldm, mem_t newm, FILE *outfile);

/* How big should the memory be? */
#ifdef BIG_MEM
#define MEM_SIZE (1<<16)
#else
#define MEM_SIZE (1<<13)
#endif

/*** In the following functions, a return value of 1 means success ***/

/* Load memory from .yo file.  Return number of bytes read */
int load_mem(mem_t m, FILE *infile, int report_error);

/* Get byte from memory */
bool_t get_byte_val(mem_t m, word_t pos, byte_t *dest);

/* Get 4 bytes from memory */
bool_t get_word_val(mem_t m, word_t pos, word_t *dest);

/* Set byte in memory */
bool_t set_byte_val(mem_t m, word_t pos, byte_t val);

/* Set 4 bytes in memory */
bool_t set_word_val(mem_t m, word_t pos, word_t val);

/* Print contents of memory */
void dump_memory(FILE *outfile, mem_t m, word_t pos, int cnt);

/********** Implementation of Register File *************/

mem_t init_reg();
void free_reg();

/* Make a copy of a register file */
mem_t copy_reg(mem_t oldr);
/* Print the differences between two register files */
bool_t diff_reg(mem_t oldr, mem_t newr, FILE *outfile);


word_t get_reg_val(mem_t r, reg_id_t id);
void set_reg_val(mem_t r, reg_id_t id, word_t val);
void dump_reg(FILE *outfile, mem_t r);



/* ****************  ALU Function **********************/

/* Compute ALU operation */
word_t compute_alu(alu_t op, word_t arg1, word_t arg2);

typedef unsigned char cc_t;

#define GET_ZF(cc) (((cc) >> 2)&0x1)
#define GET_SF(cc) (((cc) >> 1)&0x1)
#define GET_OF(cc) (((cc) >> 0)&0x1)

#define PACK_CC(z,s,o) (((z)<<2)|((s)<<1)|((o)<<0))

#define DEFAULT_CC PACK_CC(1,0,0)

/* Compute condition code.  */
cc_t compute_cc(alu_t op, word_t arg1, word_t arg2);

/* Generated printed form of condition code */
char *cc_name(cc_t c);

/* **************** Status types *******************/

typedef enum 
 {STAT_BUB, STAT_AOK, STAT_HLT, STAT_ADR, STAT_INS, STAT_PIP } stat_t;

/* Describe Status */
char *stat_name(stat_t e);

/* **************** ISA level implementation *********/

typedef struct {
  word_t pc;
  mem_t r;
  mem_t m;
  cc_t cc;
} state_rec, *state_ptr;

state_ptr new_state(int memlen);
void free_state(state_ptr s);

state_ptr copy_state(state_ptr s);
bool_t diff_state(state_ptr olds, state_ptr news, FILE *outfile);

/* Determine if condition satisified */
bool_t cond_holds(cc_t cc, cond_t bcond);

/* Execute single instruction.  Return status. */
stat_t step_state(state_ptr s, FILE *error_file);

/************************ Interface Functions *************/

#ifdef HAS_GUI
void report_line(int line_no, int addr, char *hexcode, char *line);
void signal_register_update(reg_id_t r, int val);

#endif
sim/misc/isa.c0000700005644400000240000005135611502674071012034 0ustar  tmsgrad#include <stdlib.h>
#include <ctype.h>
#include <stdio.h>
#include <string.h>
#include "isa.h"


/* Are we running in GUI mode? */
extern int gui_mode;

/* Bytes Per Line = Block size of memory */
#define BPL 32

struct {
    char *name;
    int id;
} reg_table[REG_ERR+1] = 
{
    {"%eax",   REG_EAX},
    {"%ecx",   REG_ECX},
    {"%edx",   REG_EDX},
    {"%ebx",   REG_EBX},
    {"%esp",   REG_ESP},
    {"%ebp",   REG_EBP},
    {"%esi",   REG_ESI},
    {"%edi",   REG_EDI},
    {"----",  REG_ERR},
    {"----",  REG_ERR},
    {"----",  REG_ERR},
    {"----",  REG_ERR},
    {"----",  REG_ERR},
    {"----",  REG_ERR},
    {"----",  REG_ERR},
    {"----",  REG_NONE},
    {"----",  REG_ERR}
};


reg_id_t find_register(char *name)
{
    int i;
    for (i = 0; i < REG_NONE; i++)
	if (!strcmp(name, reg_table[i].name))
	    return reg_table[i].id;
    return REG_ERR;
}

char *reg_name(reg_id_t id)
{
    if (id >= 0 && id < REG_NONE)
	return reg_table[id].name;
    else
	return reg_table[REG_NONE].name;
}

/* Is the given register ID a valid program register? */
int reg_valid(reg_id_t id)
{
  return id >= 0 && id < REG_NONE && reg_table[id].id == id;
}

instr_t instruction_set[] = 
{
    {"nop",    HPACK(I_NOP, F_NONE), 1, NO_ARG, 0, 0, NO_ARG, 0, 0 },
    {"halt",   HPACK(I_HALT, F_NONE), 1, NO_ARG, 0, 0, NO_ARG, 0, 0 },
    {"rrmovl", HPACK(I_RRMOVL, F_NONE), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    /* Conditional move instructions are variants of RRMOVL */
    {"cmovle", HPACK(I_RRMOVL, C_LE), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"cmovl", HPACK(I_RRMOVL, C_L), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"cmove", HPACK(I_RRMOVL, C_E), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"cmovne", HPACK(I_RRMOVL, C_NE), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"cmovge", HPACK(I_RRMOVL, C_GE), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"cmovg", HPACK(I_RRMOVL, C_G), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    /* arg1hi indicates number of bytes */
    {"irmovl", HPACK(I_IRMOVL, F_NONE), 6, I_ARG, 2, 4, R_ARG, 1, 0 },
    {"rmmovl", HPACK(I_RMMOVL, F_NONE), 6, R_ARG, 1, 1, M_ARG, 1, 0 },
    {"mrmovl", HPACK(I_MRMOVL, F_NONE), 6, M_ARG, 1, 0, R_ARG, 1, 1 },
    {"addl",   HPACK(I_ALU, A_ADD), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"subl",   HPACK(I_ALU, A_SUB), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"andl",   HPACK(I_ALU, A_AND), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    {"xorl",   HPACK(I_ALU, A_XOR), 2, R_ARG, 1, 1, R_ARG, 1, 0 },
    /* arg1hi indicates number of bytes */
    {"jmp",    HPACK(I_JMP, C_YES), 5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"jle",    HPACK(I_JMP, C_LE), 5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"jl",     HPACK(I_JMP, C_L), 5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"je",     HPACK(I_JMP, C_E), 5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"jne",    HPACK(I_JMP, C_NE), 5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"jge",    HPACK(I_JMP, C_GE), 5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"jg",     HPACK(I_JMP, C_G), 5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"call",   HPACK(I_CALL, F_NONE),    5, I_ARG, 1, 4, NO_ARG, 0, 0 },
    {"ret",    HPACK(I_RET, F_NONE), 1, NO_ARG, 0, 0, NO_ARG, 0, 0 },
    {"pushl",  HPACK(I_PUSHL, F_NONE) , 2, R_ARG, 1, 1, NO_ARG, 0, 0 },
    {"popl",   HPACK(I_POPL, F_NONE) ,  2, R_ARG, 1, 1, NO_ARG, 0, 0 },
    {"iaddl",  HPACK(I_IADDL, F_NONE), 6, I_ARG, 2, 4, R_ARG, 1, 0 },
    {"leave",  HPACK(I_LEAVE, F_NONE), 1, NO_ARG, 0, 0, NO_ARG, 0, 0 },
    /* this is just a hack to make the I_POP2 code have an associated name */
    {"pop2",   HPACK(I_POP2, F_NONE) , 0, NO_ARG, 0, 0, NO_ARG, 0, 0 },

    /* For allocation instructions, arg1hi indicates number of bytes */
    {".byte",  0x00, 1, I_ARG, 0, 1, NO_ARG, 0, 0 },
    {".word",  0x00, 2, I_ARG, 0, 2, NO_ARG, 0, 0 },
    {".long",  0x00, 4, I_ARG, 0, 4, NO_ARG, 0, 0 },
    {NULL,     0   , 0, NO_ARG, 0, 0, NO_ARG, 0, 0 }
};

instr_t invalid_instr =
    {"XXX",     0   , 0, NO_ARG, 0, 0, NO_ARG, 0, 0 };

instr_ptr find_instr(char *name)
{
    int i;
    for (i = 0; instruction_set[i].name; i++)
	if (strcmp(instruction_set[i].name,name) == 0)
	    return &instruction_set[i];
    return NULL;
}

/* Return name of instruction given its encoding */
char *iname(int instr) {
    int i;
    for (i = 0; instruction_set[i].name; i++) {
	if (instr == instruction_set[i].code)
	    return instruction_set[i].name;
    }
    return "<bad>";
}


instr_ptr bad_instr()
{
    return &invalid_instr;
}


mem_t init_mem(int len)
{

    mem_t result = (mem_t) malloc(sizeof(mem_rec));
    len = ((len+BPL-1)/BPL)*BPL;
    result->len = len;
    result->contents = (byte_t *) calloc(len, 1);
    return result;
}

void clear_mem(mem_t m)
{
    memset(m->contents, 0, m->len);
}

void free_mem(mem_t m)
{
    free((void *) m->contents);
    free((void *) m);
}

mem_t copy_mem(mem_t oldm)
{
    mem_t newm = init_mem(oldm->len);
    memcpy(newm->contents, oldm->contents, oldm->len);
    return newm;
}

bool_t diff_mem(mem_t oldm, mem_t newm, FILE *outfile)
{
    word_t pos;
    int len = oldm->len;
    bool_t diff = FALSE;
    if (newm->len < len)
	len = newm->len;
    for (pos = 0; (!diff || outfile) && pos < len; pos += 4) {
        word_t ov = 0;  word_t nv = 0;
	get_word_val(oldm, pos, &ov);
	get_word_val(newm, pos, &nv);
	if (nv != ov) {
	    diff = TRUE;
	    if (outfile)
		fprintf(outfile, "0x%.4x:\t0x%.8x\t0x%.8x\n", pos, ov, nv);
	}
    }
    return diff;
}

int hex2dig(char c)
{
    if (isdigit((int)c))
	return c - '0';
    if (isupper((int)c))
	return c - 'A' + 10;
    else
	return c - 'a' + 10;
}

#define LINELEN 4096
int load_mem(mem_t m, FILE *infile, int report_error)
{
    /* Read contents of .yo file */
    char buf[LINELEN];
    char c, ch, cl;
    int byte_cnt = 0;
    int lineno = 0;
    word_t bytepos = 0;
    int empty_line = 1;
    int addr = 0;
    char hexcode[15];

#ifdef HAS_GUI
    /* For display */
    int line_no = 0;
    char line[LINELEN];
#endif /* HAS_GUI */   

    int index = 0;

    while (fgets(buf, LINELEN, infile)) {
	int cpos = 0;
	empty_line = 1;
	lineno++;
	/* Skip white space */
	while (isspace((int)buf[cpos]))
	    cpos++;

	if (buf[cpos] != '0' ||
	    (buf[cpos+1] != 'x' && buf[cpos+1] != 'X'))
	    continue; /* Skip this line */      
	cpos+=2;

	/* Get address */
	bytepos = 0;
	while (isxdigit((int)(c=buf[cpos]))) {
	    cpos++;
	    bytepos = bytepos*16 + hex2dig(c);
	}

	while (isspace((int)buf[cpos]))
	    cpos++;

	if (buf[cpos++] != ':') {
	    if (report_error) {
		fprintf(stderr, "Error reading file. Expected colon\n");
		fprintf(stderr, "Line %d:%s\n", lineno, buf);
		fprintf(stderr,
			"Reading '%c' at position %d\n", buf[cpos], cpos);
	    }
	    return 0;
	}

	addr = bytepos;

	while (isspace((int)buf[cpos]))
	    cpos++;

	index = 0;

	/* Get code */
	while (isxdigit((int)(ch=buf[cpos++])) && 
	       isxdigit((int)(cl=buf[cpos++]))) {
	    byte_t byte = 0;
	    if (bytepos >= m->len) {
		if (report_error) {
		    fprintf(stderr,
			    "Error reading file. Invalid address. 0x%x\n",
			    bytepos);
		    fprintf(stderr, "Line %d:%s\n", lineno, buf);
		}
		return 0;
	    }
	    byte = hex2dig(ch)*16+hex2dig(cl);
	    m->contents[bytepos++] = byte;
	    byte_cnt++;
	    empty_line = 0;
	    hexcode[index++] = ch;
	    hexcode[index++] = cl;
	}
	/* Fill rest of hexcode with blanks */
	for (; index < 12; index++)
	    hexcode[index] = ' ';
	hexcode[index] = '\0';

#ifdef HAS_GUI
	if (gui_mode) {
	    /* Now get the rest of the line */
	    while (isspace((int)buf[cpos]))
		cpos++;
	    cpos++; /* Skip over '|' */
	    
	    index = 0;
	    while ((c = buf[cpos++]) != '\0' && c != '\n') {
		line[index++] = c;
	    }
	    line[index] = '\0';
	    if (!empty_line)
		report_line(line_no++, addr, hexcode, line);
	}
#endif /* HAS_GUI */ 
    }
    return byte_cnt;
}

bool_t get_byte_val(mem_t m, word_t pos, byte_t *dest)
{
    if (pos < 0 || pos >= m->len)
	return FALSE;
    *dest = m->contents[pos];
    return TRUE;
}

bool_t get_word_val(mem_t m, word_t pos, word_t *dest)
{
    int i;
    word_t val;
    if (pos < 0 || pos + 4 > m->len)
	return FALSE;
    val = 0;
    for (i = 0; i < 4; i++)
	val = val | m->contents[pos+i]<<(8*i);
    *dest = val;
    return TRUE;
}

bool_t set_byte_val(mem_t m, word_t pos, byte_t val)
{
    if (pos < 0 || pos >= m->len)
	return FALSE;
    m->contents[pos] = val;
    return TRUE;
}

bool_t set_word_val(mem_t m, word_t pos, word_t val)
{
    int i;
    if (pos < 0 || pos + 4 > m->len)
	return FALSE;
    for (i = 0; i < 4; i++) {
	m->contents[pos+i] = val & 0xFF;
	val >>= 8;
    }
    return TRUE;
}

void dump_memory(FILE *outfile, mem_t m, word_t pos, int len)
{
    int i, j;
    while (pos % BPL) {
	pos --;
	len ++;
    }

    len = ((len+BPL-1)/BPL)*BPL;

    if (pos+len > m->len)
	len = m->len-pos;

    for (i = 0; i < len; i+=BPL) {
	word_t val = 0;
	fprintf(outfile, "0x%.4x:", pos+i);
	for (j = 0; j < BPL; j+= 4) {
	    get_word_val(m, pos+i+j, &val);
	    fprintf(outfile, " %.8x", val);
	}
    }
}

mem_t init_reg()
{
    return init_mem(32);
}

void free_reg(mem_t r)
{
    free_mem(r);
}

mem_t copy_reg(mem_t oldr)
{
    return copy_mem(oldr);
}

bool_t diff_reg(mem_t oldr, mem_t newr, FILE *outfile)
{
    word_t pos;
    int len = oldr->len;
    bool_t diff = FALSE;
    if (newr->len < len)
	len = newr->len;
    for (pos = 0; (!diff || outfile) && pos < len; pos += 4) {
        word_t ov = 0;
        word_t nv = 0;
	get_word_val(oldr, pos, &ov);
	get_word_val(newr, pos, &nv);
	if (nv != ov) {
	    diff = TRUE;
	    if (outfile)
		fprintf(outfile, "%s:\t0x%.8x\t0x%.8x\n",
			reg_table[pos/4].name, ov, nv);
	}
    }
    return diff;
}

word_t get_reg_val(mem_t r, reg_id_t id)
{
    word_t val = 0;
    if (id >= REG_NONE)
	return 0;
    get_word_val(r,id*4, &val);
    return val;
}

void set_reg_val(mem_t r, reg_id_t id, word_t val)
{
    if (id < REG_NONE) {
	set_word_val(r,id*4,val);
#ifdef HAS_GUI
	if (gui_mode) {
	    signal_register_update(id, val);
	}
#endif /* HAS_GUI */
    }
}
     
void dump_reg(FILE *outfile, mem_t r) {
    reg_id_t id;
    for (id = 0; reg_valid(id); id++) {
	fprintf(outfile, "   %s  ", reg_table[id].name);
    }
    fprintf(outfile, "\n");
    for (id = 0; reg_valid(id); id++) {
	word_t val = 0;
	get_word_val(r, id*4, &val);
	fprintf(outfile, " %x", val);
    }
    fprintf(outfile, "\n");
}

struct {
    char symbol;
    int id;
} alu_table[A_NONE+1] = 
{
    {'+',   A_ADD},
    {'-',   A_SUB},
    {'&',   A_AND},
    {'^',   A_XOR},
    {'?',   A_NONE}
};

char op_name(alu_t op)
{
    if (op < A_NONE)
	return alu_table[op].symbol;
    else
	return alu_table[A_NONE].symbol;
}

word_t compute_alu(alu_t op, word_t argA, word_t argB)
{
    word_t val;
    switch(op) {
    case A_ADD:
	val = argA+argB;
	break;
    case A_SUB:
	val = argB-argA;
	break;
    case A_AND:
	val = argA&argB;
	break;
    case A_XOR:
	val = argA^argB;
	break;
    default:
	val = 0;
    }
    return val;
}

cc_t compute_cc(alu_t op, word_t argA, word_t argB)
{
    word_t val = compute_alu(op, argA, argB);
    bool_t zero = (val == 0);
    bool_t sign = ((int)val < 0);
    bool_t ovf;
    switch(op) {
    case A_ADD:
        ovf = (((int) argA < 0) == ((int) argB < 0)) &&
  	       (((int) val < 0) != ((int) argA < 0));
	break;
    case A_SUB:
        ovf = (((int) argA > 0) == ((int) argB < 0)) &&
	       (((int) val < 0) != ((int) argB < 0));
	break;
    case A_AND:
    case A_XOR:
	ovf = FALSE;
	break;
    default:
	ovf = FALSE;
    }
    return PACK_CC(zero,sign,ovf);
    
}

char *cc_names[8] = {
    "Z=0 S=0 O=0",
    "Z=0 S=0 O=1",
    "Z=0 S=1 O=0",
    "Z=0 S=1 O=1",
    "Z=1 S=0 O=0",
    "Z=1 S=0 O=1",
    "Z=1 S=1 O=0",
    "Z=1 S=1 O=1"};

char *cc_name(cc_t c)
{
    int ci = c;
    if (ci < 0 || ci > 7)
	return "???????????";
    else
	return cc_names[c];
}

/* Status types */

char *stat_names[] = { "BUB", "AOK", "HLT", "ADR", "INS", "PIP" };

char *stat_name(stat_t e)
{
    if (e < 0 || e > STAT_PIP)
	return "Invalid Status";
    return stat_names[e];
}

/**************** Implementation of ISA model ************************/

state_ptr new_state(int memlen)
{
    state_ptr result = (state_ptr) malloc(sizeof(state_rec));
    result->pc = 0;
    result->r = init_reg();
    result->m = init_mem(memlen);
    result->cc = DEFAULT_CC;
    return result;
}

void free_state(state_ptr s)
{
    free_reg(s->r);
    free_mem(s->m);
    free((void *) s);
}

state_ptr copy_state(state_ptr s) {
    state_ptr result = (state_ptr) malloc(sizeof(state_rec));
    result->pc = s->pc;
    result->r = copy_reg(s->r);
    result->m = copy_mem(s->m);
    result->cc = s->cc;
    return result;
}

bool_t diff_state(state_ptr olds, state_ptr news, FILE *outfile) {
    bool_t diff = FALSE;

    if (olds->pc != news->pc) {
	diff = TRUE;
	if (outfile) {
	    fprintf(outfile, "pc:\t0x%.8x\t0x%.8x\n", olds->pc, news->pc);
	}
    }
    if (olds->cc != news->cc) {
	diff = TRUE;
	if (outfile) {
	    fprintf(outfile, "cc:\t%s\t%s\n", cc_name(olds->cc), cc_name(news->cc));
	}
    }
    if (diff_reg(olds->r, news->r, outfile))
	diff = TRUE;
    if (diff_mem(olds->m, news->m, outfile))
	diff = TRUE;
    return diff;
}


/* Branch logic */
bool_t cond_holds(cc_t cc, cond_t bcond) {
    bool_t zf = GET_ZF(cc);
    bool_t sf = GET_SF(cc);
    bool_t of = GET_OF(cc);
    bool_t jump = FALSE;
    
    switch(bcond) {
    case C_YES:
	jump = TRUE;
	break;
    case C_LE:
	jump = (sf^of)|zf;
	break;
    case C_L:
	jump = sf^of;
	break;
    case C_E:
	jump = zf;
	break;
    case C_NE:
	jump = zf^1;
	break;
    case C_GE:
	jump = sf^of^1;
	break;
    case C_G:
	jump = (sf^of^1)&(zf^1);
	break;
    default:
	jump = FALSE;
	break;
    }
    return jump;
}


/* Execute single instruction.  Return status. */
stat_t step_state(state_ptr s, FILE *error_file)
{
    word_t argA, argB;
    byte_t byte0 = 0;
    byte_t byte1 = 0;
    itype_t hi0;
    alu_t  lo0;
    reg_id_t hi1 = REG_NONE;
    reg_id_t lo1 = REG_NONE;
    bool_t ok1 = TRUE;
    word_t cval = 0;
    word_t okc = TRUE;
    word_t val, dval;
    bool_t need_regids;
    bool_t need_imm;
    word_t ftpc = s->pc;  /* Fall-through PC */

    if (!get_byte_val(s->m, ftpc, &byte0)) {
	if (error_file)
	    fprintf(error_file,
		    "PC = 0x%x, Invalid instruction address\n", s->pc);
	return STAT_ADR;
    }
    ftpc++;

    hi0 = HI4(byte0);
    lo0 = LO4(byte0);

    need_regids =
	(hi0 == I_RRMOVL || hi0 == I_ALU || hi0 == I_PUSHL ||
	 hi0 == I_POPL || hi0 == I_IRMOVL || hi0 == I_RMMOVL ||
	 hi0 == I_MRMOVL || hi0 == I_IADDL);

    if (need_regids) {
	ok1 = get_byte_val(s->m, ftpc, &byte1);
	ftpc++;
	hi1 = HI4(byte1);
	lo1 = LO4(byte1);
    }

    need_imm =
	(hi0 == I_IRMOVL || hi0 == I_RMMOVL || hi0 == I_MRMOVL ||
	 hi0 == I_JMP || hi0 == I_CALL || hi0 == I_IADDL);

    if (need_imm) {
	okc = get_word_val(s->m, ftpc, &cval);
	ftpc += 4;
    }

    switch (hi0) {
    case I_NOP:
	s->pc = ftpc;
	break;
    case I_HALT:
	return STAT_HLT;
	break;
    case I_RRMOVL:  /* Both unconditional and conditional moves */
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!reg_valid(hi1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n",
			s->pc, hi1);
	    return STAT_INS;
	}
	if (!reg_valid(lo1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n",
			s->pc, lo1);
	    return STAT_INS;
	}
	val = get_reg_val(s->r, hi1);
	if (cond_holds(s->cc, lo0))
	  set_reg_val(s->r, lo1, val);
	s->pc = ftpc;
	break;
    case I_IRMOVL:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!okc) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address",
			s->pc);
	    return STAT_INS;
	}
	if (!reg_valid(lo1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n",
			s->pc, lo1);
	    return STAT_INS;
	}
	set_reg_val(s->r, lo1, cval);
	s->pc = ftpc;
	break;
    case I_RMMOVL:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!okc) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_INS;
	}
	if (!reg_valid(hi1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n",
			s->pc, hi1);
	    return STAT_INS;
	}
	if (reg_valid(lo1)) 
	    cval += get_reg_val(s->r, lo1);
	val = get_reg_val(s->r, hi1);
	if (!set_word_val(s->m, cval, val)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid data address 0x%x\n",
			s->pc, cval);
	    return STAT_ADR;
	}
	s->pc = ftpc;
	break;
    case I_MRMOVL:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!okc) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction addres\n", s->pc);
	    return STAT_INS;
	}
	if (!reg_valid(hi1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n",
			s->pc, hi1);
	    return STAT_INS;
	}
	if (reg_valid(lo1)) 
	    cval += get_reg_val(s->r, lo1);
	if (!get_word_val(s->m, cval, &val))
	    return STAT_ADR;
	set_reg_val(s->r, hi1, val);
	s->pc = ftpc;
	break;
    case I_ALU:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	argA = get_reg_val(s->r, hi1);
	argB = get_reg_val(s->r, lo1);
	val = compute_alu(lo0, argA, argB);
	set_reg_val(s->r, lo1, val);
	s->cc = compute_cc(lo0, argA, argB);
	s->pc = ftpc;
	break;
    case I_JMP:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!okc) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (cond_holds(s->cc, lo0))
	    s->pc = cval;
	else
	    s->pc = ftpc;
	break;
    case I_CALL:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!okc) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	val = get_reg_val(s->r, REG_ESP) - 4;
	set_reg_val(s->r, REG_ESP, val);
	if (!set_word_val(s->m, val, ftpc)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid stack address 0x%x\n", s->pc, val);
	    return STAT_ADR;
	}
	s->pc = cval;
	break;
    case I_RET:
	/* Return Instruction.  Pop address from stack */
	dval = get_reg_val(s->r, REG_ESP);
	if (!get_word_val(s->m, dval, &val)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid stack address 0x%x\n",
			s->pc, dval);
	    return STAT_ADR;
	}
	set_reg_val(s->r, REG_ESP, dval + 4);
	s->pc = val;
	break;
    case I_PUSHL:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!reg_valid(hi1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n", s->pc, hi1);
	    return STAT_INS;
	}
	val = get_reg_val(s->r, hi1);
	dval = get_reg_val(s->r, REG_ESP) - 4;
	set_reg_val(s->r, REG_ESP, dval);
	if  (!set_word_val(s->m, dval, val)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid stack address 0x%x\n", s->pc, dval);
	    return STAT_ADR;
	}
	s->pc = ftpc;
	break;
    case I_POPL:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!reg_valid(hi1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n", s->pc, hi1);
	    return STAT_INS;
	}
	dval = get_reg_val(s->r, REG_ESP);
	set_reg_val(s->r, REG_ESP, dval+4);
	if (!get_word_val(s->m, dval, &val)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid stack address 0x%x\n",
			s->pc, dval);
	    return STAT_ADR;
	}
	set_reg_val(s->r, hi1, val);
	s->pc = ftpc;
	break;
    case I_LEAVE:
	dval = get_reg_val(s->r, REG_EBP);
	set_reg_val(s->r, REG_ESP, dval+4);
	if (!get_word_val(s->m, dval, &val)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid stack address 0x%x\n",
			s->pc, dval);
	    return STAT_ADR;
	}
	set_reg_val(s->r, REG_EBP, val);
	s->pc = ftpc;
	break;
    case I_IADDL:
	if (!ok1) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address\n", s->pc);
	    return STAT_ADR;
	}
	if (!okc) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid instruction address",
			s->pc);
	    return STAT_INS;
	}
	if (!reg_valid(lo1)) {
	    if (error_file)
		fprintf(error_file,
			"PC = 0x%x, Invalid register ID 0x%.1x\n",
			s->pc, lo1);
	    return STAT_INS;
	}
	argB = get_reg_val(s->r, lo1);
	val = argB + cval;
	set_reg_val(s->r, lo1, val);
	s->cc = compute_cc(A_ADD, cval, argB);
	s->pc = ftpc;
	break;
    default:
	if (error_file)
	    fprintf(error_file,
		    "PC = 0x%x, Invalid instruction %.2x\n", s->pc, byte0);
	return STAT_INS;
    }
    return STAT_AOK;
}
sim/misc/yas.c0000700005644400000240000003171111515366253012051 0ustar  tmsgrad/* Assembler for Y86 instruction set */
/* If want to enable code generation for > 4096 bytes, compile
   with flag -DBIG_MEM
*/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "yas.h"
#include "isa.h"

void add_symbol(char *, int);
int find_symbol(char *);
int instr_size(char *);

/* YIS never runs in GUI mode */
int gui_mode = 0;

FILE *outfile;

int verbose = 0;
/* Generate initialized memory for Verilog? */
int vcode = 0;

/* Should it generate code for banked memory? */
int block_factor = 0;

int lineno = 1; /* Line number of input file */
int bytepos = 0; /* Address of current instruction being processed */
int error_mode = 0; /* Am I trying to finish off a line with an error? */
int hit_error = 0; /* Have I hit any errors? */

int pass = 1; /* Am I in pass 1 or 2? */

/* General strategy is to read tokens for a complete line and then
   process them.
*/
#define TOK_PER_LINE 12

/* Token types */
typedef enum{ TOK_IDENT, TOK_NUM, TOK_REG, TOK_INSTR, TOK_PUNCT, TOK_ERR }
  token_t;

/* Token representation */
typedef struct {
    char *sval; /* String    */
    int ival;   /* Integer   */
    char cval;  /* Character */
    token_t type; /* Type    */
} token_rec, *token_ptr;

/* Information about current input line */
token_rec tokens[TOK_PER_LINE];
int lineno;  /* What line number am I processing? */
int bytepos; /* What byte address is the current instruction */
int tcount;  /* How many tokens are there in this line? */
int tpos;    /* What token am I currently processing */

/* Storage for strings in current line */
#define STRMAX 4096
char strbuf[STRMAX];
int strpos;

/* Storage of current line */
char input_line[STRMAX];

void save_line(char *s)
{
    int len = strlen(s);
    int i;
    if (len >= STRMAX)
	fail("Input Line too long");
    strcpy(input_line, s);
    for (i = len-1; input_line[i] == '\n' || input_line[i] == '\r'; i--)
	input_line[i] = '\0'; /* Remove terminator */
}

/* Information about current instruction being generated */
char code[6];     /* Byte encoding */
int codepos = 0;  /* Current position in byte encoding */
int bcount = 0;   /* Length of current instruction */

/* Debugging information */
char token_type_names[] = {'I', 'N', 'R', 'X', 'P'};

void print_token(FILE *out, token_ptr t)
{
    fprintf(out, " [%c ", token_type_names[t->type]);
    switch(t->type) {
    case TOK_IDENT:
    case TOK_REG:
    case TOK_INSTR:
	fprintf(out, "%s]", t->sval);
	break;
    case TOK_NUM:
	fprintf(out, "%d]", t->ival);
	break;
    case TOK_PUNCT:
	fprintf(out, "%c]", t->cval);
	break;
    case TOK_ERR:
	fprintf(out, "ERR]");
	break;
    default:
	fprintf(out, "?]");
	fail("Unknown token type");
    }
}

/* For debugging */
void print_instruction(FILE *out)
{
    int i;
    fprintf(out, "Line %d, Byte %d: ", lineno, bytepos);
    for (i = 0; i < tcount; i++)
	print_token(out, &tokens[i]);
    fprintf(out, " Code: ");
    for (i = 0; i < bcount; i++)
	fprintf(out, "%.2x ", code[i] & 0xFF);
    fprintf(out, "\n");
}

/* Write len least significant hex digits of value at dest.
   Don't null terminate */
static void hexstuff(char *dest, int value, int len)
{
    int i;
    for (i = 0; i < len; i++) {
	char c;
	int h = (value >> 4*i) & 0xF;
	c = h < 10 ? h + '0' : h - 10 + 'a';
	dest[len-i-1] = c;
    }
}

void print_code(FILE *out, int pos)
{
#ifdef BIG_MEM
    /* Printing format:
       0xHHHH: cccccccccccc | <line>
       where HHHH is address
       cccccccccccc is code
    */
    char outstring[27];
    if (tcount) {
	int i;
	strcpy(outstring, "  0x0000:              | ");
	hexstuff(outstring+4, pos, 4);
	for (i = 0; i < bcount; i++)
	    hexstuff(outstring+9+2*i, code[i]&0xFF, 2);
    }
    else
	strcpy(outstring, "                       | ");
#else /* BIG_MEM */
    /* Printing format:
       0xHHH: cccccccccccc | <line>
       where HHH is address
       cccccccccccc is code
    */
    char outstring[26];
    if (tcount) {
	int i;
	strcpy(outstring, "  0x000:              | ");
	hexstuff(outstring+4, pos, 3);
	for (i = 0; i < bcount; i++)
	    hexstuff(outstring+9+2*i, code[i]&0xFF, 2);
    }
    else
	strcpy(outstring, "                      | ");

#endif /* BIG_MEM */

    if (vcode) {
      fprintf(out, "//%s%s\n", outstring, input_line);
      if (tcount) {
	int i;
	for (i = 0; tcount && i < bcount; i++) {
	    if (block_factor) {
		fprintf(out, "    bank%d[%d] = 8\'h%.2x;\n", (pos+i)%block_factor, (pos+i)/block_factor, code[i] & 0xFF);
	    } else {
		fprintf(out, "    mem[%d] = 8\'h%.2x;\n", pos+i, code[i] & 0xFF);
	    }
	}
      }
    } else {
      fprintf(out, "%s%s\n", outstring, input_line);
    }
}

void fail(char *message)
{
    if (!error_mode) {
	fprintf(stderr, "Error on line %d: %s\n", lineno, message);
	fprintf(stderr, "Line %d, Byte 0x%.4x: %s\n",
		lineno, bytepos, input_line);
    }
    error_mode = 1;
    hit_error = 1;
}

/* Parse Register from set of tokens and put into high or low
   4 bits of code[codepos] */
void get_reg(int codepos, int hi)
{
    int rval = REG_NONE;
    char c;
    if (tokens[tpos].type != TOK_REG) {
	fail("Expecting Register ID");
	return;
    } else {
	rval = find_register(tokens[tpos].sval);
    }
    /* Insert into output */
    c = code[codepos];
    if (hi)
	c = (c & 0x0F) | (rval << 4);
    else
	c = (c & 0xF0) | rval;
    code[codepos] = c;
    tpos++;
}

/* Get numeric value of given number of bytes */
/* Offset indicates value to subtract from number (for PC relative) */
void get_num(int codepos, int bytes, int offset)
{
    int val = 0;
    int i;
    if (tokens[tpos].type == TOK_NUM) {
	val = tokens[tpos].ival;
    } else if (tokens[tpos].type == TOK_IDENT) {
	val = find_symbol(tokens[tpos].sval);
    } else {
	fail("Number Expected");
	return;
    }
    val -= offset;
    for (i = 0; i < bytes; i++)
	code[codepos+i] = (val >> (i * 8)) & 0xFF;
    tpos++;
}


/* Get memory reference.
   Can be of form:
   Num(Reg)
   (Reg)
   Num
   Ident
   Ident(Reg)
   Put Reg in low position of current byte, and Number in following bytes
   */
void get_mem(int codepos)
{
    char rval = REG_NONE;
    int val = 0;
    int i;
    char c;
    token_t type = tokens[tpos].type;
    /* Deal with optional displacement */
    if (type == TOK_NUM) {
	val = tokens[tpos++].ival;
	type = tokens[tpos].type;
    } else if (type == TOK_IDENT) {
	val = find_symbol(tokens[tpos++].sval);
	type = tokens[tpos].type;    
    }
    /* Check for optional register */
    if (type == TOK_PUNCT) {
	if (tokens[tpos].cval == '(') {
	    tpos++;
	    if (tokens[tpos].type == TOK_REG)
		rval = find_register(tokens[tpos++].sval);
	    else {
		fail("Expecting Register Id");
		return;
	    }
	    if (tokens[tpos].type != TOK_PUNCT ||
		tokens[tpos++].cval != ')') {
		fail("Expecting ')'");
		return;
	    }
	}
    }
    c = (code[codepos] & 0xF0) | (rval & 0xF);
    code[codepos++] = c;
    for (i = 0; i < 4; i++)
	code[codepos+i] = (val >> (i*8)) & 0xFF;
}

void start_line()
{
    int t;
    error_mode = 0;
    tpos = 0;
    tcount = 0;
    bcount = 0;
    strpos = 0;
    for (t = 0; t < TOK_PER_LINE; t++)
	tokens[t].type = TOK_ERR;
}

void finish_line()
{
    int size;
    instr_ptr instr;
    int savebytepos = bytepos;
    tpos = 0;
    codepos = 0;
    if (tcount == 0) {
	if (pass > 1)
	    print_code(outfile, savebytepos);
	start_line();
	return; /* Empty line */
    }
    /* Completion of an erroneous line */
    if (error_mode) {
	start_line();
	return;
    }

    /* See if this is a labeled line */
    if (tokens[0].type == TOK_IDENT) {
	if (tokens[1].type != TOK_PUNCT ||
	    tokens[1].cval != ':') {
	    fail("Missing Colon");
	    start_line();
	    return;
	} else {
	    if (pass == 1)
		add_symbol(tokens[0].sval, bytepos);
	    tpos+=2;
	    if (tcount == 2) {
		/* That's all for this line */
		if (pass > 1)
		    print_code(outfile, savebytepos);
		start_line();
		return;
	    }
	}
    }
    /* Get instruction */
    if (tokens[tpos].type != TOK_INSTR) {
	fail("Bad Instruction");
	start_line();
	return;
    }
    /* Process .pos */
    if (strcmp(tokens[tpos].sval, ".pos") == 0) {
	if (tokens[++tpos].type != TOK_NUM) {
	    fail("Invalid Address");
	    start_line();
	    return;
	}
	bytepos = tokens[tpos].ival;
	if (pass > 1) {
	    print_code(outfile, bytepos);
	}
	start_line();
	return;
    }
    /* Process .align */
    if (strcmp(tokens[tpos].sval, ".align") == 0) {
	int a;
	if (tokens[++tpos].type != TOK_NUM || (a=tokens[tpos].ival) <= 0) {
	    fail("Invalid Alignment");
	    start_line();
	    return;
	}
	bytepos = ((bytepos+a-1)/a)*a;

	if (pass > 1) {
	    print_code(outfile, bytepos);
	}
	start_line();
	return;
    }
    /* Get instruction size */
    instr = find_instr(tokens[tpos++].sval);
    if (instr == NULL) {
	fail("Invalid Instruction");
	instr = bad_instr();
    }
    size = instr->bytes;
    bytepos += size;
    bcount = size;


    /* If this is pass 1, then we're done */
    if (pass == 1) {
	start_line();
	return;
    }

    /* Here's where we really process the instructions */
    code[0] = instr->code;
    code[1] = HPACK(REG_NONE, REG_NONE);
    switch(instr->arg1) {
    case R_ARG:
	get_reg(instr->arg1pos, instr->arg1hi);
	break;
    case M_ARG:
	get_mem(instr->arg1pos);
	break;
    case I_ARG:
	get_num(instr->arg1pos, instr->arg1hi, 0);
	break;
    case NO_ARG:
    default:
	break;
    }
    if (instr->arg2 != NO_ARG) {
	/* Get comma  */
	if (tokens[tpos].type != TOK_PUNCT ||
	    tokens[tpos].cval != ',') {
	    fail("Expecting Comma");
	    start_line();
	    return;
	}
	tpos++;
    
	/* Get second argument */ 
	switch(instr->arg2) {
	case R_ARG:
	    get_reg(instr->arg2pos, instr->arg2hi);
	    break;
	case M_ARG:
	    get_mem(instr->arg2pos);
	    break;
	case I_ARG:
	    get_num(instr->arg2pos, instr->arg2hi, 0);
	    break;
	case NO_ARG:
	default:
	    break;
	}
    }

    print_code(outfile, savebytepos);
    start_line();
}

void add_token(token_t type, char *s, int i, char c)
{
    char *t = NULL;
    if (!tcount)
	start_line();
    if (tpos >= TOK_PER_LINE-1) {
	fail("Line too long");
	return;
    }
    if (s) {
	int len = strlen(s)+1;
	if (strpos + len > STRMAX) {
	    fail("Line too long");
	    return;
	}
	t = strcpy(strbuf+strpos, s);
	strpos+= len;
    }
    tokens[tcount].type = type;
    tokens[tcount].sval = t;
    tokens[tcount].ival = i;
    tokens[tcount].cval = c;
    tcount++;
}

void add_ident(char *s)
{
    add_token(TOK_IDENT, s, 0, ' ');
}

void add_instr(char *s)
{
    add_token(TOK_INSTR, s, 0, ' ');
}

void add_reg(char *s)
{
    add_token(TOK_REG, s, 0, ' ');
}

void add_num(int i)
{
    add_token(TOK_NUM, NULL, i, ' ');
}

void add_punct(char c)
{
    add_token(TOK_PUNCT, NULL, 0, c);
}

#define STAB 1000

#define INIT_CNT 0

int symbol_cnt = INIT_CNT;
struct {
    char *name;
    int pos;
} symbol_table[STAB];

void add_symbol(char *name, int p)
{
    char *t = (char *) malloc(strlen(name)+1);
    strcpy(t, name);
    symbol_table[symbol_cnt].name = t;
    symbol_table[symbol_cnt].pos = p;
    symbol_cnt++;
}

int find_symbol(char *name)
{
    int i;
    for (i = 0; i < symbol_cnt; i++)
	if (strcmp(name, symbol_table[i].name) == 0)
	    return symbol_table[i].pos;
    fail("Can't find label");
    return -1;
}

int yywrap()
{
    int i;
    if (verbose && pass > 1) {
	printf("Symbol Table:\n");
	for (i = INIT_CNT; i < symbol_cnt; i++)
	    printf(" %s\t0x%x\n", symbol_table[i].name, symbol_table[i].pos);
    }
    return 1;
}

extern FILE *yyin;
int yylex();

static void usage(char *pname)
{
    printf("Usage: %s [-V[n]] file.ys\n", pname);
    printf("   -V[n]  Generate memory initialization in Verilog format (n-way blocking)\n");
    exit(0);
}

int main(int argc, char *argv[])
{
    int rootlen;
    char infname[512];
    char outfname[512];
    int nextarg = 1;
    if (argc < 2)
	usage(argv[0]);
    if (argv[nextarg][0] == '-') {
      char flag = argv[nextarg][1];
      switch (flag) {
      case 'V':
	vcode = 1;
	if (argv[nextarg][2]) {
	    block_factor = atoi(argv[nextarg]+2);
	    if (block_factor != 8) {
		fprintf(stderr, "Unknown blocking factor %d\n", block_factor);
		exit(1);
	    }
	}
	nextarg++;
	break;
      default:
	usage(argv[0]);
      }
    }
    rootlen = strlen(argv[nextarg])-3;
    if (strcmp(argv[nextarg]+rootlen, ".ys"))
	usage(argv[0]);
    if (rootlen > 500) {
	fprintf(stderr, "File name too long\n");
	exit(1);
    }
    strncpy(infname, argv[nextarg], rootlen);
    strcpy(infname+rootlen, ".ys");

    yyin = fopen(infname, "r");
    if (!yyin) {
	fprintf(stderr, "Can't open input file '%s'\n", infname);
	exit(1);
    }

    if (vcode) {
      outfile = stdout;
    } else {
      strncpy(outfname, argv[nextarg], rootlen);
      strcpy(outfname+rootlen, ".yo");
      outfile = fopen(outfname, "w");
      if (!outfile) {
	fprintf(stderr, "Can't open output file '%s'\n", outfname);
	exit(1);
      }
    }

    pass = 1;

    yylex();
    fclose(yyin);

    if (hit_error)
	exit(1);

    pass = 2;
    lineno = 1;
    error_mode = 0;
    bytepos = 0;
    yyin = fopen(infname, "r");
    if (!yyin) {
	fprintf(stderr, "Can't open input file '%s'\n", infname);
	exit(1);
    }

    yylex();
    fclose(yyin);
    fclose(outfile);
    return hit_error;
}

sim/misc/yas.h0000700005644400000240000000033007533157265012055 0ustar  tmsgradvoid save_line(char *);
void finish_line();
void add_reg(char *);
void add_ident(char *);
void add_instr(char *);
void add_punct(char);
void add_num(int);
void fail(char *msg);

/* Current line number */
int lineno;
sim/misc/yis.c0000700005644400000240000000235211163714067012057 0ustar  tmsgrad/* Instruction set simulator for Y86 Architecture */

#include <stdio.h>
#include <stdlib.h>

#include "isa.h"

/* YIS never runs in GUI mode */
int gui_mode = 0;

void usage(char *pname)
{
    printf("Usage: %s code_file [max_steps]\n", pname);
    exit(0);
}

int main(int argc, char *argv[])
{
    FILE *code_file;
    int max_steps = 10000;

    state_ptr s = new_state(MEM_SIZE);
    mem_t saver = copy_reg(s->r);
    mem_t savem;
    int step = 0;

    stat_t e = STAT_AOK;

    if (argc < 2 || argc > 3)
	usage(argv[0]);
    code_file = fopen(argv[1], "r");
    if (!code_file) {
	fprintf(stderr, "Can't open code file '%s'\n", argv[1]);
	exit(1);
    }

    if (!load_mem(s->m, code_file, 1)) {
	printf("Exiting\n");
	return 1;
    }

    savem = copy_mem(s->m);
  
    if (argc > 2)
	max_steps = atoi(argv[2]);

    for (step = 0; step < max_steps && e == STAT_AOK; step++)
	e = step_state(s, stdout);

    printf("Stopped in %d steps at PC = 0x%x.  Status '%s', CC %s\n",
	   step, s->pc, stat_name(e), cc_name(s->cc));

    printf("Changes to registers:\n");
    diff_reg(saver, s->r, stdout);

    printf("\nChanges to memory:\n");
    diff_mem(savem, s->m, stdout);

    free_state(s);
    free_reg(saver);
    free_mem(savem);

    return 0;
}
sim/misc/examples.c0000700005644400000240000000156407533157265013104 0ustar  tmsgrad/* 
 * Architecture Lab: Part A 
 * 
 * High level specs for the functions that the students will rewrite
 * in Y86 assembly language
 */

/* $begin examples */
/* linked list element */
typedef struct ELE {
    int val;
    struct ELE *next;
} *list_ptr;

/* sum_list - Sum the elements of a linked list */
int sum_list(list_ptr ls)
{
    int val = 0;
    while (ls) {
	val += ls->val;
	ls = ls->next;
    }
    return val;
}

/* rsum_list - Recursive version of sum_list */
int rsum_list(list_ptr ls)
{
    if (!ls)
	return 0;
    else {
	int val = ls->val;
	int rest = rsum_list(ls->next);
	return val + rest;
    }
}

/* copy_block - Copy src to dest and return xor checksum of src */
int copy_block(int *src, int *dest, int len)
{
    int result = 0;
    while (len > 0) {
	int val = *src++;
	*dest++ = val;
	result ^= val;
	len--;
    }
    return result;
}
/* $end examples */
sim/misc/hcl.lex0000700005644400000240000000303307533166305012366 0ustar  tmsgrad%{
#include <stdio.h>
#include "node.h"
#define YYSTYPE node_ptr
#include "hcl.tab.h"


extern YYSTYPE yylval;
extern int lineno;
%}
%%
[ \r\t\f]              ;
[\n]                  lineno++;
"#".*\n               lineno++ ;
quote                 return(QUOTE);
boolsig               return(BOOLARG);
bool                  return(BOOL);
intsig                return(INTARG);
int                   return(INT);
in                    return(IN);
'[^']*'               yylval = make_quote(yytext); return(QSTRING);
[a-zA-Z][a-zA-Z0-9_]* yylval = make_var(yytext); return(VAR);
[0-9][0-9]*           yylval = make_num(yytext); return(NUM);
-[0-9][0-9]*          yylval = make_num(yytext); return(NUM);
"="                   return(ASSIGN);
";"                   return(SEMI);
":"                   return(COLON);
","                   return(COMMA);
"("                   return(LPAREN);
")"                   return(RPAREN);
"{"                   return(LBRACE);
"}"                   return(RBRACE);
"["                   return(LBRACK);
"]"                   return(RBRACK);
"&&"                   return(AND);
"||"                   return(OR);
"!="                  yylval = make_var(yytext); return(COMP);
"=="                  yylval = make_var(yytext); return(COMP);
"<"                   yylval = make_var(yytext); return(COMP);
"<="                  yylval = make_var(yytext); return(COMP);
">"                   yylval = make_var(yytext); return(COMP);
">="                  yylval = make_var(yytext); return(COMP);
"!"                   return(NOT);
%%

sim/misc/hcl.y0000700005644400000240000000412110331500737012034 0ustar  tmsgrad%{
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "node.h"
#define YYSTYPE node_ptr

/* Current line number.  Maintained by lex */
int lineno = 1;
#define ERRLIM 5
int errcnt = 0;



FILE *outfile;

int yyparse(void);
int yylex(void);

void yyerror(const char *str)
{
  fprintf(stderr, "Error, near line %d: %s\n", lineno, str);
  if (++errcnt > ERRLIM) {
      fprintf(stderr, "Too many errors, aborting\n");
      exit(1);
  }
}

static char errmsg[1024];
void yyserror(const char *str, char *other)
{
    sprintf(errmsg, str, other);
    yyerror(errmsg);
}

int yywrap()
{
  return 1;
}
  
int main(int argc, char **argv)
{
    init_node(argc, argv);
    outfile = stdout;
    yyparse();
    finish_node(0);
    return errcnt != 0;
}

%}

%token QUOTE BOOLARG BOOL INTARG INT QSTRING
  VAR NUM ASSIGN SEMI COLON COMMA LPAREN RPAREN LBRACE 
  RBRACE LBRACK RBRACK AND OR NOT COMP IN

/* All operators are left associative.  Listed from lowest to highest */
%left OR
%left AND
%left NOT
%left COMP
%left IN

%%

statements: /* empty */
       | statements statement
       ;

statement:
       QUOTE QSTRING                       { insert_code($2); }
       | BOOLARG VAR QSTRING               { add_arg($2, $3, 1); }
       | INTARG VAR QSTRING                { add_arg($2, $3, 0); }
       | BOOL VAR ASSIGN expr SEMI         { gen_funct($2, $4, 1); }
       | INT VAR ASSIGN expr SEMI          { gen_funct($2, $4, 0); }
       ;

expr:
       VAR                    { $$=$1; }
       | NUM                  { $$=$1; }
       | LPAREN expr RPAREN   { $$=$2; }
       | NOT expr             { $$=make_not($2); }
       | expr AND expr        { $$=make_and($1, $3); }
       | expr OR expr         { $$=make_or($1, $3); }
       | expr COMP expr       { $$=make_comp($2,$1,$3); }
       | expr IN LBRACE exprlist RBRACE     { $$=make_ele($1, $4);}
       | LBRACK caselist RBRACK { $$=$2; } 
       ;

exprlist:
       expr { $$=$1; }
       | exprlist COMMA expr { $$=concat($1, $3); }

caselist:
       /* Empty */ { $$=NULL; }
       | caselist expr COLON expr SEMI { $$=concat($1, make_case($2, $4));}

sim/misc/hcl.tab.c0000600005644400000240000013317611715057304012573 0ustar  tmsgrad
/* A Bison parser, made by GNU Bison 2.4.1.  */

/* Skeleton implementation for Bison's Yacc-like parsers in C
   
      Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
   Free Software Foundation, Inc.
   
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
   
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

/* As a special exception, you may create a larger work that contains
   part or all of the Bison parser skeleton and distribute that work
   under terms of your choice, so long as that work isn't itself a
   parser generator using the skeleton or a modified version thereof
   as a parser skeleton.  Alternatively, if you modify or redistribute
   the parser skeleton itself, you may (at your option) remove this
   special exception, which will cause the skeleton and the resulting
   Bison output files to be licensed under the GNU General Public
   License without this special exception.
   
   This special exception was added by the Free Software Foundation in
   version 2.2 of Bison.  */

/* C LALR(1) parser skeleton written by Richard Stallman, by
   simplifying the original so-called "semantic" parser.  */

/* All symbols defined below should begin with yy or YY, to avoid
   infringing on user name space.  This should be done even for local
   variables, as they might otherwise be expanded by user macros.
   There are some unavoidable exceptions within include files to
   define necessary library symbols; they are noted "INFRINGES ON
   USER NAME SPACE" below.  */

/* Identify Bison output.  */
#define YYBISON 1

/* Bison version.  */
#define YYBISON_VERSION "2.4.1"

/* Skeleton name.  */
#define YYSKELETON_NAME "yacc.c"

/* Pure parsers.  */
#define YYPURE 0

/* Push parsers.  */
#define YYPUSH 0

/* Pull parsers.  */
#define YYPULL 1

/* Using locations.  */
#define YYLSP_NEEDED 0



/* Copy the first part of user declarations.  */

/* Line 189 of yacc.c  */
#line 1 "hcl.y"

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "node.h"
#define YYSTYPE node_ptr

/* Current line number.  Maintained by lex */
int lineno = 1;
#define ERRLIM 5
int errcnt = 0;



FILE *outfile;

int yyparse(void);
int yylex(void);

void yyerror(const char *str)
{
  fprintf(stderr, "Error, near line %d: %s\n", lineno, str);
  if (++errcnt > ERRLIM) {
      fprintf(stderr, "Too many errors, aborting\n");
      exit(1);
  }
}

static char errmsg[1024];
void yyserror(const char *str, char *other)
{
    sprintf(errmsg, str, other);
    yyerror(errmsg);
}

int yywrap()
{
  return 1;
}
  
int main(int argc, char **argv)
{
    init_node(argc, argv);
    outfile = stdout;
    yyparse();
    finish_node(0);
    return errcnt != 0;
}



/* Line 189 of yacc.c  */
#line 125 "hcl.tab.c"

/* Enabling traces.  */
#ifndef YYDEBUG
# define YYDEBUG 0
#endif

/* Enabling verbose error messages.  */
#ifdef YYERROR_VERBOSE
# undef YYERROR_VERBOSE
# define YYERROR_VERBOSE 1
#else
# define YYERROR_VERBOSE 0
#endif

/* Enabling the token table.  */
#ifndef YYTOKEN_TABLE
# define YYTOKEN_TABLE 0
#endif


/* Tokens.  */
#ifndef YYTOKENTYPE
# define YYTOKENTYPE
   /* Put the tokens into the symbol table, so that GDB and other debuggers
      know about them.  */
   enum yytokentype {
     QUOTE = 258,
     BOOLARG = 259,
     BOOL = 260,
     INTARG = 261,
     INT = 262,
     QSTRING = 263,
     VAR = 264,
     NUM = 265,
     ASSIGN = 266,
     SEMI = 267,
     COLON = 268,
     COMMA = 269,
     LPAREN = 270,
     RPAREN = 271,
     LBRACE = 272,
     RBRACE = 273,
     LBRACK = 274,
     RBRACK = 275,
     AND = 276,
     OR = 277,
     NOT = 278,
     COMP = 279,
     IN = 280
   };
#endif



#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
typedef int YYSTYPE;
# define YYSTYPE_IS_TRIVIAL 1
# define yystype YYSTYPE /* obsolescent; will be withdrawn */
# define YYSTYPE_IS_DECLARED 1
#endif


/* Copy the second part of user declarations.  */


/* Line 264 of yacc.c  */
#line 192 "hcl.tab.c"

#ifdef short
# undef short
#endif

#ifdef YYTYPE_UINT8
typedef YYTYPE_UINT8 yytype_uint8;
#else
typedef unsigned char yytype_uint8;
#endif

#ifdef YYTYPE_INT8
typedef YYTYPE_INT8 yytype_int8;
#elif (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
typedef signed char yytype_int8;
#else
typedef short int yytype_int8;
#endif

#ifdef YYTYPE_UINT16
typedef YYTYPE_UINT16 yytype_uint16;
#else
typedef unsigned short int yytype_uint16;
#endif

#ifdef YYTYPE_INT16
typedef YYTYPE_INT16 yytype_int16;
#else
typedef short int yytype_int16;
#endif

#ifndef YYSIZE_T
# ifdef __SIZE_TYPE__
#  define YYSIZE_T __SIZE_TYPE__
# elif defined size_t
#  define YYSIZE_T size_t
# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
#  include <stddef.h> /* INFRINGES ON USER NAME SPACE */
#  define YYSIZE_T size_t
# else
#  define YYSIZE_T unsigned int
# endif
#endif

#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)

#ifndef YY_
# if YYENABLE_NLS
#  if ENABLE_NLS
#   include <libintl.h> /* INFRINGES ON USER NAME SPACE */
#   define YY_(msgid) dgettext ("bison-runtime", msgid)
#  endif
# endif
# ifndef YY_
#  define YY_(msgid) msgid
# endif
#endif

/* Suppress unused-variable warnings by "using" E.  */
#if ! defined lint || defined __GNUC__
# define YYUSE(e) ((void) (e))
#else
# define YYUSE(e) /* empty */
#endif

/* Identity function, used to suppress warnings about constant conditions.  */
#ifndef lint
# define YYID(n) (n)
#else
#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static int
YYID (int yyi)
#else
static int
YYID (yyi)
    int yyi;
#endif
{
  return yyi;
}
#endif

#if ! defined yyoverflow || YYERROR_VERBOSE

/* The parser invokes alloca or malloc; define the necessary symbols.  */

# ifdef YYSTACK_USE_ALLOCA
#  if YYSTACK_USE_ALLOCA
#   ifdef __GNUC__
#    define YYSTACK_ALLOC __builtin_alloca
#   elif defined __BUILTIN_VA_ARG_INCR
#    include <alloca.h> /* INFRINGES ON USER NAME SPACE */
#   elif defined _AIX
#    define YYSTACK_ALLOC __alloca
#   elif defined _MSC_VER
#    include <malloc.h> /* INFRINGES ON USER NAME SPACE */
#    define alloca _alloca
#   else
#    define YYSTACK_ALLOC alloca
#    if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
#     include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
#     ifndef _STDLIB_H
#      define _STDLIB_H 1
#     endif
#    endif
#   endif
#  endif
# endif

# ifdef YYSTACK_ALLOC
   /* Pacify GCC's `empty if-body' warning.  */
#  define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
#  ifndef YYSTACK_ALLOC_MAXIMUM
    /* The OS might guarantee only one guard page at the bottom of the stack,
       and a page size can be as small as 4096 bytes.  So we cannot safely
       invoke alloca (N) if N exceeds 4096.  Use a slightly smaller number
       to allow for a few compiler-allocated temporary stack slots.  */
#   define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
#  endif
# else
#  define YYSTACK_ALLOC YYMALLOC
#  define YYSTACK_FREE YYFREE
#  ifndef YYSTACK_ALLOC_MAXIMUM
#   define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
#  endif
#  if (defined __cplusplus && ! defined _STDLIB_H \
       && ! ((defined YYMALLOC || defined malloc) \
	     && (defined YYFREE || defined free)))
#   include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
#   ifndef _STDLIB_H
#    define _STDLIB_H 1
#   endif
#  endif
#  ifndef YYMALLOC
#   define YYMALLOC malloc
#   if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
#   endif
#  endif
#  ifndef YYFREE
#   define YYFREE free
#   if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
void free (void *); /* INFRINGES ON USER NAME SPACE */
#   endif
#  endif
# endif
#endif /* ! defined yyoverflow || YYERROR_VERBOSE */


#if (! defined yyoverflow \
     && (! defined __cplusplus \
	 || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))

/* A type that is properly aligned for any stack member.  */
union yyalloc
{
  yytype_int16 yyss_alloc;
  YYSTYPE yyvs_alloc;
};

/* The size of the maximum gap between one aligned stack and the next.  */
# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)

/* The size of an array large to enough to hold all stacks, each with
   N elements.  */
# define YYSTACK_BYTES(N) \
     ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
      + YYSTACK_GAP_MAXIMUM)

/* Copy COUNT objects from FROM to TO.  The source and destination do
   not overlap.  */
# ifndef YYCOPY
#  if defined __GNUC__ && 1 < __GNUC__
#   define YYCOPY(To, From, Count) \
      __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
#  else
#   define YYCOPY(To, From, Count)		\
      do					\
	{					\
	  YYSIZE_T yyi;				\
	  for (yyi = 0; yyi < (Count); yyi++)	\
	    (To)[yyi] = (From)[yyi];		\
	}					\
      while (YYID (0))
#  endif
# endif

/* Relocate STACK from its old location to the new one.  The
   local variables YYSIZE and YYSTACKSIZE give the old and new number of
   elements in the stack, and YYPTR gives the new location of the
   stack.  Advance YYPTR to a properly aligned location for the next
   stack.  */
# define YYSTACK_RELOCATE(Stack_alloc, Stack)				\
    do									\
      {									\
	YYSIZE_T yynewbytes;						\
	YYCOPY (&yyptr->Stack_alloc, Stack, yysize);			\
	Stack = &yyptr->Stack_alloc;					\
	yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
	yyptr += yynewbytes / sizeof (*yyptr);				\
      }									\
    while (YYID (0))

#endif

/* YYFINAL -- State number of the termination state.  */
#define YYFINAL  2
/* YYLAST -- Last index in YYTABLE.  */
#define YYLAST   78

/* YYNTOKENS -- Number of terminals.  */
#define YYNTOKENS  26
/* YYNNTS -- Number of nonterminals.  */
#define YYNNTS  6
/* YYNRULES -- Number of rules.  */
#define YYNRULES  21
/* YYNRULES -- Number of states.  */
#define YYNSTATES  49

/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
#define YYUNDEFTOK  2
#define YYMAXUTOK   280

#define YYTRANSLATE(YYX)						\
  ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)

/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX.  */
static const yytype_uint8 yytranslate[] =
{
       0,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
       2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
       5,     6,     7,     8,     9,    10,    11,    12,    13,    14,
      15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
      25
};

#if YYDEBUG
/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
   YYRHS.  */
static const yytype_uint8 yyprhs[] =
{
       0,     0,     3,     4,     7,    10,    14,    18,    24,    30,
      32,    34,    38,    41,    45,    49,    53,    59,    63,    65,
      69,    70
};

/* YYRHS -- A `-1'-separated list of the rules' RHS.  */
static const yytype_int8 yyrhs[] =
{
      27,     0,    -1,    -1,    27,    28,    -1,     3,     8,    -1,
       4,     9,     8,    -1,     6,     9,     8,    -1,     5,     9,
      11,    29,    12,    -1,     7,     9,    11,    29,    12,    -1,
       9,    -1,    10,    -1,    15,    29,    16,    -1,    23,    29,
      -1,    29,    21,    29,    -1,    29,    22,    29,    -1,    29,
      24,    29,    -1,    29,    25,    17,    30,    18,    -1,    19,
      31,    20,    -1,    29,    -1,    30,    14,    29,    -1,    -1,
      31,    29,    13,    29,    12,    -1
};

/* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
static const yytype_uint8 yyrline[] =
{
       0,    65,    65,    66,    70,    71,    72,    73,    74,    78,
      79,    80,    81,    82,    83,    84,    85,    86,    90,    91,
      94,    95
};
#endif

#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
   First, the terminals, then, starting at YYNTOKENS, nonterminals.  */
static const char *const yytname[] =
{
  "$end", "error", "$undefined", "QUOTE", "BOOLARG", "BOOL", "INTARG",
  "INT", "QSTRING", "VAR", "NUM", "ASSIGN", "SEMI", "COLON", "COMMA",
  "LPAREN", "RPAREN", "LBRACE", "RBRACE", "LBRACK", "RBRACK", "AND", "OR",
  "NOT", "COMP", "IN", "$accept", "statements", "statement", "expr",
  "exprlist", "caselist", 0
};
#endif

# ifdef YYPRINT
/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
   token YYLEX-NUM.  */
static const yytype_uint16 yytoknum[] =
{
       0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
     265,   266,   267,   268,   269,   270,   271,   272,   273,   274,
     275,   276,   277,   278,   279,   280
};
# endif

/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
static const yytype_uint8 yyr1[] =
{
       0,    26,    27,    27,    28,    28,    28,    28,    28,    29,
      29,    29,    29,    29,    29,    29,    29,    29,    30,    30,
      31,    31
};

/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN.  */
static const yytype_uint8 yyr2[] =
{
       0,     2,     0,     2,     2,     3,     3,     5,     5,     1,
       1,     3,     2,     3,     3,     3,     5,     3,     1,     3,
       0,     5
};

/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
   STATE-NUM when YYTABLE doesn't specify something else to do.  Zero
   means the default is an error.  */
static const yytype_uint8 yydefact[] =
{
       2,     0,     1,     0,     0,     0,     0,     0,     3,     4,
       0,     0,     0,     0,     5,     0,     6,     0,     9,    10,
       0,    20,     0,     0,     0,     0,     0,    12,     7,     0,
       0,     0,     0,     8,    11,    17,     0,    13,    14,    15,
       0,     0,    18,     0,     0,     0,    16,    21,    19
};

/* YYDEFGOTO[NTERM-NUM].  */
static const yytype_int8 yydefgoto[] =
{
      -1,     1,     8,    23,    43,    26
};

/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
   STATE-NUM.  */
#define YYPACT_NINF -18
static const yytype_int8 yypact[] =
{
     -18,    66,   -18,    -7,    -3,     8,    18,    23,   -18,   -18,
      -4,    22,    26,    32,   -18,    21,   -18,    21,   -18,   -18,
      21,   -18,    21,    25,    30,   -14,     6,    -5,   -18,    21,
      21,    21,    24,   -18,   -18,   -18,    43,    -5,    14,    20,
      21,    21,    53,     4,    36,    21,   -18,   -18,    53
};

/* YYPGOTO[NTERM-NUM].  */
static const yytype_int8 yypgoto[] =
{
     -18,   -18,   -18,   -17,   -18,   -18
};

/* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
   positive, shift that token.  If negative, reduce the rule which
   number is the opposite.  If zero, do what YYDEFACT says.
   If YYTABLE_NINF, syntax error.  */
#define YYTABLE_NINF -1
static const yytype_uint8 yytable[] =
{
      24,     9,    34,    25,    14,    27,    10,    29,    30,    36,
      31,    32,    37,    38,    39,    18,    19,    11,    45,    31,
      32,    20,    46,    42,    44,    21,    35,    12,    48,    22,
      18,    19,    13,    15,    16,    29,    20,    28,    31,    32,
      21,    40,    33,    17,    22,    32,    29,    30,    47,    31,
      32,    29,    30,     0,    31,    32,    41,    29,    30,     0,
      31,    32,     0,     0,    29,    30,     2,    31,    32,     3,
       4,     5,     6,     7,    29,    30,     0,    31,    32
};

static const yytype_int8 yycheck[] =
{
      17,     8,    16,    20,     8,    22,     9,    21,    22,    26,
      24,    25,    29,    30,    31,     9,    10,     9,    14,    24,
      25,    15,    18,    40,    41,    19,    20,     9,    45,    23,
       9,    10,     9,    11,     8,    21,    15,    12,    24,    25,
      19,    17,    12,    11,    23,    25,    21,    22,    12,    24,
      25,    21,    22,    -1,    24,    25,    13,    21,    22,    -1,
      24,    25,    -1,    -1,    21,    22,     0,    24,    25,     3,
       4,     5,     6,     7,    21,    22,    -1,    24,    25
};

/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
   symbol of state STATE-NUM.  */
static const yytype_uint8 yystos[] =
{
       0,    27,     0,     3,     4,     5,     6,     7,    28,     8,
       9,     9,     9,     9,     8,    11,     8,    11,     9,    10,
      15,    19,    23,    29,    29,    29,    31,    29,    12,    21,
      22,    24,    25,    12,    16,    20,    29,    29,    29,    29,
      17,    13,    29,    30,    29,    14,    18,    12,    29
};

#define yyerrok		(yyerrstatus = 0)
#define yyclearin	(yychar = YYEMPTY)
#define YYEMPTY		(-2)
#define YYEOF		0

#define YYACCEPT	goto yyacceptlab
#define YYABORT		goto yyabortlab
#define YYERROR		goto yyerrorlab


/* Like YYERROR except do call yyerror.  This remains here temporarily
   to ease the transition to the new meaning of YYERROR, for GCC.
   Once GCC version 2 has supplanted version 1, this can go.  */

#define YYFAIL		goto yyerrlab

#define YYRECOVERING()  (!!yyerrstatus)

#define YYBACKUP(Token, Value)					\
do								\
  if (yychar == YYEMPTY && yylen == 1)				\
    {								\
      yychar = (Token);						\
      yylval = (Value);						\
      yytoken = YYTRANSLATE (yychar);				\
      YYPOPSTACK (1);						\
      goto yybackup;						\
    }								\
  else								\
    {								\
      yyerror (YY_("syntax error: cannot back up")); \
      YYERROR;							\
    }								\
while (YYID (0))


#define YYTERROR	1
#define YYERRCODE	256


/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
   If N is 0, then set CURRENT to the empty location which ends
   the previous symbol: RHS[0] (always defined).  */

#define YYRHSLOC(Rhs, K) ((Rhs)[K])
#ifndef YYLLOC_DEFAULT
# define YYLLOC_DEFAULT(Current, Rhs, N)				\
    do									\
      if (YYID (N))                                                    \
	{								\
	  (Current).first_line   = YYRHSLOC (Rhs, 1).first_line;	\
	  (Current).first_column = YYRHSLOC (Rhs, 1).first_column;	\
	  (Current).last_line    = YYRHSLOC (Rhs, N).last_line;		\
	  (Current).last_column  = YYRHSLOC (Rhs, N).last_column;	\
	}								\
      else								\
	{								\
	  (Current).first_line   = (Current).last_line   =		\
	    YYRHSLOC (Rhs, 0).last_line;				\
	  (Current).first_column = (Current).last_column =		\
	    YYRHSLOC (Rhs, 0).last_column;				\
	}								\
    while (YYID (0))
#endif


/* YY_LOCATION_PRINT -- Print the location on the stream.
   This macro was not mandated originally: define only if we know
   we won't break user code: when these are the locations we know.  */

#ifndef YY_LOCATION_PRINT
# if YYLTYPE_IS_TRIVIAL
#  define YY_LOCATION_PRINT(File, Loc)			\
     fprintf (File, "%d.%d-%d.%d",			\
	      (Loc).first_line, (Loc).first_column,	\
	      (Loc).last_line,  (Loc).last_column)
# else
#  define YY_LOCATION_PRINT(File, Loc) ((void) 0)
# endif
#endif


/* YYLEX -- calling `yylex' with the right arguments.  */

#ifdef YYLEX_PARAM
# define YYLEX yylex (YYLEX_PARAM)
#else
# define YYLEX yylex ()
#endif

/* Enable debugging if requested.  */
#if YYDEBUG

# ifndef YYFPRINTF
#  include <stdio.h> /* INFRINGES ON USER NAME SPACE */
#  define YYFPRINTF fprintf
# endif

# define YYDPRINTF(Args)			\
do {						\
  if (yydebug)					\
    YYFPRINTF Args;				\
} while (YYID (0))

# define YY_SYMBOL_PRINT(Title, Type, Value, Location)			  \
do {									  \
  if (yydebug)								  \
    {									  \
      YYFPRINTF (stderr, "%s ", Title);					  \
      yy_symbol_print (stderr,						  \
		  Type, Value); \
      YYFPRINTF (stderr, "\n");						  \
    }									  \
} while (YYID (0))


/*--------------------------------.
| Print this symbol on YYOUTPUT.  |
`--------------------------------*/

/*ARGSUSED*/
#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static void
yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
#else
static void
yy_symbol_value_print (yyoutput, yytype, yyvaluep)
    FILE *yyoutput;
    int yytype;
    YYSTYPE const * const yyvaluep;
#endif
{
  if (!yyvaluep)
    return;
# ifdef YYPRINT
  if (yytype < YYNTOKENS)
    YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
# else
  YYUSE (yyoutput);
# endif
  switch (yytype)
    {
      default:
	break;
    }
}


/*--------------------------------.
| Print this symbol on YYOUTPUT.  |
`--------------------------------*/

#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static void
yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
#else
static void
yy_symbol_print (yyoutput, yytype, yyvaluep)
    FILE *yyoutput;
    int yytype;
    YYSTYPE const * const yyvaluep;
#endif
{
  if (yytype < YYNTOKENS)
    YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
  else
    YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);

  yy_symbol_value_print (yyoutput, yytype, yyvaluep);
  YYFPRINTF (yyoutput, ")");
}

/*------------------------------------------------------------------.
| yy_stack_print -- Print the state stack from its BOTTOM up to its |
| TOP (included).                                                   |
`------------------------------------------------------------------*/

#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static void
yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop)
#else
static void
yy_stack_print (yybottom, yytop)
    yytype_int16 *yybottom;
    yytype_int16 *yytop;
#endif
{
  YYFPRINTF (stderr, "Stack now");
  for (; yybottom <= yytop; yybottom++)
    {
      int yybot = *yybottom;
      YYFPRINTF (stderr, " %d", yybot);
    }
  YYFPRINTF (stderr, "\n");
}

# define YY_STACK_PRINT(Bottom, Top)				\
do {								\
  if (yydebug)							\
    yy_stack_print ((Bottom), (Top));				\
} while (YYID (0))


/*------------------------------------------------.
| Report that the YYRULE is going to be reduced.  |
`------------------------------------------------*/

#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static void
yy_reduce_print (YYSTYPE *yyvsp, int yyrule)
#else
static void
yy_reduce_print (yyvsp, yyrule)
    YYSTYPE *yyvsp;
    int yyrule;
#endif
{
  int yynrhs = yyr2[yyrule];
  int yyi;
  unsigned long int yylno = yyrline[yyrule];
  YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
	     yyrule - 1, yylno);
  /* The symbols being reduced.  */
  for (yyi = 0; yyi < yynrhs; yyi++)
    {
      YYFPRINTF (stderr, "   $%d = ", yyi + 1);
      yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
		       &(yyvsp[(yyi + 1) - (yynrhs)])
		       		       );
      YYFPRINTF (stderr, "\n");
    }
}

# define YY_REDUCE_PRINT(Rule)		\
do {					\
  if (yydebug)				\
    yy_reduce_print (yyvsp, Rule); \
} while (YYID (0))

/* Nonzero means print parse trace.  It is left uninitialized so that
   multiple parsers can coexist.  */
int yydebug;
#else /* !YYDEBUG */
# define YYDPRINTF(Args)
# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
# define YY_STACK_PRINT(Bottom, Top)
# define YY_REDUCE_PRINT(Rule)
#endif /* !YYDEBUG */


/* YYINITDEPTH -- initial size of the parser's stacks.  */
#ifndef	YYINITDEPTH
# define YYINITDEPTH 200
#endif

/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
   if the built-in stack extension method is used).

   Do not make this value too large; the results are undefined if
   YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
   evaluated with infinite-precision integer arithmetic.  */

#ifndef YYMAXDEPTH
# define YYMAXDEPTH 10000
#endif



#if YYERROR_VERBOSE

# ifndef yystrlen
#  if defined __GLIBC__ && defined _STRING_H
#   define yystrlen strlen
#  else
/* Return the length of YYSTR.  */
#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static YYSIZE_T
yystrlen (const char *yystr)
#else
static YYSIZE_T
yystrlen (yystr)
    const char *yystr;
#endif
{
  YYSIZE_T yylen;
  for (yylen = 0; yystr[yylen]; yylen++)
    continue;
  return yylen;
}
#  endif
# endif

# ifndef yystpcpy
#  if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
#   define yystpcpy stpcpy
#  else
/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
   YYDEST.  */
#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static char *
yystpcpy (char *yydest, const char *yysrc)
#else
static char *
yystpcpy (yydest, yysrc)
    char *yydest;
    const char *yysrc;
#endif
{
  char *yyd = yydest;
  const char *yys = yysrc;

  while ((*yyd++ = *yys++) != '\0')
    continue;

  return yyd - 1;
}
#  endif
# endif

# ifndef yytnamerr
/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
   quotes and backslashes, so that it's suitable for yyerror.  The
   heuristic is that double-quoting is unnecessary unless the string
   contains an apostrophe, a comma, or backslash (other than
   backslash-backslash).  YYSTR is taken from yytname.  If YYRES is
   null, do not copy; instead, return the length of what the result
   would have been.  */
static YYSIZE_T
yytnamerr (char *yyres, const char *yystr)
{
  if (*yystr == '"')
    {
      YYSIZE_T yyn = 0;
      char const *yyp = yystr;

      for (;;)
	switch (*++yyp)
	  {
	  case '\'':
	  case ',':
	    goto do_not_strip_quotes;

	  case '\\':
	    if (*++yyp != '\\')
	      goto do_not_strip_quotes;
	    /* Fall through.  */
	  default:
	    if (yyres)
	      yyres[yyn] = *yyp;
	    yyn++;
	    break;

	  case '"':
	    if (yyres)
	      yyres[yyn] = '\0';
	    return yyn;
	  }
    do_not_strip_quotes: ;
    }

  if (! yyres)
    return yystrlen (yystr);

  return yystpcpy (yyres, yystr) - yyres;
}
# endif

/* Copy into YYRESULT an error message about the unexpected token
   YYCHAR while in state YYSTATE.  Return the number of bytes copied,
   including the terminating null byte.  If YYRESULT is null, do not
   copy anything; just return the number of bytes that would be
   copied.  As a special case, return 0 if an ordinary "syntax error"
   message will do.  Return YYSIZE_MAXIMUM if overflow occurs during
   size calculation.  */
static YYSIZE_T
yysyntax_error (char *yyresult, int yystate, int yychar)
{
  int yyn = yypact[yystate];

  if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
    return 0;
  else
    {
      int yytype = YYTRANSLATE (yychar);
      YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
      YYSIZE_T yysize = yysize0;
      YYSIZE_T yysize1;
      int yysize_overflow = 0;
      enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
      char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
      int yyx;

# if 0
      /* This is so xgettext sees the translatable formats that are
	 constructed on the fly.  */
      YY_("syntax error, unexpected %s");
      YY_("syntax error, unexpected %s, expecting %s");
      YY_("syntax error, unexpected %s, expecting %s or %s");
      YY_("syntax error, unexpected %s, expecting %s or %s or %s");
      YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
# endif
      char *yyfmt;
      char const *yyf;
      static char const yyunexpected[] = "syntax error, unexpected %s";
      static char const yyexpecting[] = ", expecting %s";
      static char const yyor[] = " or %s";
      char yyformat[sizeof yyunexpected
		    + sizeof yyexpecting - 1
		    + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
		       * (sizeof yyor - 1))];
      char const *yyprefix = yyexpecting;

      /* Start YYX at -YYN if negative to avoid negative indexes in
	 YYCHECK.  */
      int yyxbegin = yyn < 0 ? -yyn : 0;

      /* Stay within bounds of both yycheck and yytname.  */
      int yychecklim = YYLAST - yyn + 1;
      int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
      int yycount = 1;

      yyarg[0] = yytname[yytype];
      yyfmt = yystpcpy (yyformat, yyunexpected);

      for (yyx = yyxbegin; yyx < yyxend; ++yyx)
	if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
	  {
	    if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
	      {
		yycount = 1;
		yysize = yysize0;
		yyformat[sizeof yyunexpected - 1] = '\0';
		break;
	      }
	    yyarg[yycount++] = yytname[yyx];
	    yysize1 = yysize + yytnamerr (0, yytname[yyx]);
	    yysize_overflow |= (yysize1 < yysize);
	    yysize = yysize1;
	    yyfmt = yystpcpy (yyfmt, yyprefix);
	    yyprefix = yyor;
	  }

      yyf = YY_(yyformat);
      yysize1 = yysize + yystrlen (yyf);
      yysize_overflow |= (yysize1 < yysize);
      yysize = yysize1;

      if (yysize_overflow)
	return YYSIZE_MAXIMUM;

      if (yyresult)
	{
	  /* Avoid sprintf, as that infringes on the user's name space.
	     Don't have undefined behavior even if the translation
	     produced a string with the wrong number of "%s"s.  */
	  char *yyp = yyresult;
	  int yyi = 0;
	  while ((*yyp = *yyf) != '\0')
	    {
	      if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
		{
		  yyp += yytnamerr (yyp, yyarg[yyi++]);
		  yyf += 2;
		}
	      else
		{
		  yyp++;
		  yyf++;
		}
	    }
	}
      return yysize;
    }
}
#endif /* YYERROR_VERBOSE */


/*-----------------------------------------------.
| Release the memory associated to this symbol.  |
`-----------------------------------------------*/

/*ARGSUSED*/
#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
static void
yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep)
#else
static void
yydestruct (yymsg, yytype, yyvaluep)
    const char *yymsg;
    int yytype;
    YYSTYPE *yyvaluep;
#endif
{
  YYUSE (yyvaluep);

  if (!yymsg)
    yymsg = "Deleting";
  YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);

  switch (yytype)
    {

      default:
	break;
    }
}

/* Prevent warnings from -Wmissing-prototypes.  */
#ifdef YYPARSE_PARAM
#if defined __STDC__ || defined __cplusplus
int yyparse (void *YYPARSE_PARAM);
#else
int yyparse ();
#endif
#else /* ! YYPARSE_PARAM */
#if defined __STDC__ || defined __cplusplus
int yyparse (void);
#else
int yyparse ();
#endif
#endif /* ! YYPARSE_PARAM */


/* The lookahead symbol.  */
int yychar;

/* The semantic value of the lookahead symbol.  */
YYSTYPE yylval;

/* Number of syntax errors so far.  */
int yynerrs;



/*-------------------------.
| yyparse or yypush_parse.  |
`-------------------------*/

#ifdef YYPARSE_PARAM
#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
int
yyparse (void *YYPARSE_PARAM)
#else
int
yyparse (YYPARSE_PARAM)
    void *YYPARSE_PARAM;
#endif
#else /* ! YYPARSE_PARAM */
#if (defined __STDC__ || defined __C99__FUNC__ \
     || defined __cplusplus || defined _MSC_VER)
int
yyparse (void)
#else
int
yyparse ()

#endif
#endif
{


    int yystate;
    /* Number of tokens to shift before error messages enabled.  */
    int yyerrstatus;

    /* The stacks and their tools:
       `yyss': related to states.
       `yyvs': related to semantic values.

       Refer to the stacks thru separate pointers, to allow yyoverflow
       to reallocate them elsewhere.  */

    /* The state stack.  */
    yytype_int16 yyssa[YYINITDEPTH];
    yytype_int16 *yyss;
    yytype_int16 *yyssp;

    /* The semantic value stack.  */
    YYSTYPE yyvsa[YYINITDEPTH];
    YYSTYPE *yyvs;
    YYSTYPE *yyvsp;

    YYSIZE_T yystacksize;

  int yyn;
  int yyresult;
  /* Lookahead token as an internal (translated) token number.  */
  int yytoken;
  /* The variables used to return semantic value and location from the
     action routines.  */
  YYSTYPE yyval;

#if YYERROR_VERBOSE
  /* Buffer for error messages, and its allocated size.  */
  char yymsgbuf[128];
  char *yymsg = yymsgbuf;
  YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
#endif

#define YYPOPSTACK(N)   (yyvsp -= (N), yyssp -= (N))

  /* The number of symbols on the RHS of the reduced rule.
     Keep to zero when no symbol should be popped.  */
  int yylen = 0;

  yytoken = 0;
  yyss = yyssa;
  yyvs = yyvsa;
  yystacksize = YYINITDEPTH;

  YYDPRINTF ((stderr, "Starting parse\n"));

  yystate = 0;
  yyerrstatus = 0;
  yynerrs = 0;
  yychar = YYEMPTY; /* Cause a token to be read.  */

  /* Initialize stack pointers.
     Waste one element of value and location stack
     so that they stay on the same level as the state stack.
     The wasted elements are never initialized.  */
  yyssp = yyss;
  yyvsp = yyvs;

  goto yysetstate;

/*------------------------------------------------------------.
| yynewstate -- Push a new state, which is found in yystate.  |
`------------------------------------------------------------*/
 yynewstate:
  /* In all cases, when you get here, the value and location stacks
     have just been pushed.  So pushing a state here evens the stacks.  */
  yyssp++;

 yysetstate:
  *yyssp = yystate;

  if (yyss + yystacksize - 1 <= yyssp)
    {
      /* Get the current used size of the three stacks, in elements.  */
      YYSIZE_T yysize = yyssp - yyss + 1;

#ifdef yyoverflow
      {
	/* Give user a chance to reallocate the stack.  Use copies of
	   these so that the &'s don't force the real ones into
	   memory.  */
	YYSTYPE *yyvs1 = yyvs;
	yytype_int16 *yyss1 = yyss;

	/* Each stack pointer address is followed by the size of the
	   data in use in that stack, in bytes.  This used to be a
	   conditional around just the two extra args, but that might
	   be undefined if yyoverflow is a macro.  */
	yyoverflow (YY_("memory exhausted"),
		    &yyss1, yysize * sizeof (*yyssp),
		    &yyvs1, yysize * sizeof (*yyvsp),
		    &yystacksize);

	yyss = yyss1;
	yyvs = yyvs1;
      }
#else /* no yyoverflow */
# ifndef YYSTACK_RELOCATE
      goto yyexhaustedlab;
# else
      /* Extend the stack our own way.  */
      if (YYMAXDEPTH <= yystacksize)
	goto yyexhaustedlab;
      yystacksize *= 2;
      if (YYMAXDEPTH < yystacksize)
	yystacksize = YYMAXDEPTH;

      {
	yytype_int16 *yyss1 = yyss;
	union yyalloc *yyptr =
	  (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
	if (! yyptr)
	  goto yyexhaustedlab;
	YYSTACK_RELOCATE (yyss_alloc, yyss);
	YYSTACK_RELOCATE (yyvs_alloc, yyvs);
#  undef YYSTACK_RELOCATE
	if (yyss1 != yyssa)
	  YYSTACK_FREE (yyss1);
      }
# endif
#endif /* no yyoverflow */

      yyssp = yyss + yysize - 1;
      yyvsp = yyvs + yysize - 1;

      YYDPRINTF ((stderr, "Stack size increased to %lu\n",
		  (unsigned long int) yystacksize));

      if (yyss + yystacksize - 1 <= yyssp)
	YYABORT;
    }

  YYDPRINTF ((stderr, "Entering state %d\n", yystate));

  if (yystate == YYFINAL)
    YYACCEPT;

  goto yybackup;

/*-----------.
| yybackup.  |
`-----------*/
yybackup:

  /* Do appropriate processing given the current state.  Read a
     lookahead token if we need one and don't already have one.  */

  /* First try to decide what to do without reference to lookahead token.  */
  yyn = yypact[yystate];
  if (yyn == YYPACT_NINF)
    goto yydefault;

  /* Not known => get a lookahead token if don't already have one.  */

  /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol.  */
  if (yychar == YYEMPTY)
    {
      YYDPRINTF ((stderr, "Reading a token: "));
      yychar = YYLEX;
    }

  if (yychar <= YYEOF)
    {
      yychar = yytoken = YYEOF;
      YYDPRINTF ((stderr, "Now at end of input.\n"));
    }
  else
    {
      yytoken = YYTRANSLATE (yychar);
      YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
    }

  /* If the proper action on seeing token YYTOKEN is to reduce or to
     detect an error, take that action.  */
  yyn += yytoken;
  if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
    goto yydefault;
  yyn = yytable[yyn];
  if (yyn <= 0)
    {
      if (yyn == 0 || yyn == YYTABLE_NINF)
	goto yyerrlab;
      yyn = -yyn;
      goto yyreduce;
    }

  /* Count tokens shifted since error; after three, turn off error
     status.  */
  if (yyerrstatus)
    yyerrstatus--;

  /* Shift the lookahead token.  */
  YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);

  /* Discard the shifted token.  */
  yychar = YYEMPTY;

  yystate = yyn;
  *++yyvsp = yylval;

  goto yynewstate;


/*-----------------------------------------------------------.
| yydefault -- do the default action for the current state.  |
`-----------------------------------------------------------*/
yydefault:
  yyn = yydefact[yystate];
  if (yyn == 0)
    goto yyerrlab;
  goto yyreduce;


/*-----------------------------.
| yyreduce -- Do a reduction.  |
`-----------------------------*/
yyreduce:
  /* yyn is the number of a rule to reduce with.  */
  yylen = yyr2[yyn];

  /* If YYLEN is nonzero, implement the default value of the action:
     `$$ = $1'.

     Otherwise, the following line sets YYVAL to garbage.
     This behavior is undocumented and Bison
     users should not rely upon it.  Assigning to YYVAL
     unconditionally makes the parser a bit smaller, and it avoids a
     GCC warning that YYVAL may be used uninitialized.  */
  yyval = yyvsp[1-yylen];


  YY_REDUCE_PRINT (yyn);
  switch (yyn)
    {
        case 4:

/* Line 1455 of yacc.c  */
#line 70 "hcl.y"
    { insert_code((yyvsp[(2) - (2)])); ;}
    break;

  case 5:

/* Line 1455 of yacc.c  */
#line 71 "hcl.y"
    { add_arg((yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), 1); ;}
    break;

  case 6:

/* Line 1455 of yacc.c  */
#line 72 "hcl.y"
    { add_arg((yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), 0); ;}
    break;

  case 7:

/* Line 1455 of yacc.c  */
#line 73 "hcl.y"
    { gen_funct((yyvsp[(2) - (5)]), (yyvsp[(4) - (5)]), 1); ;}
    break;

  case 8:

/* Line 1455 of yacc.c  */
#line 74 "hcl.y"
    { gen_funct((yyvsp[(2) - (5)]), (yyvsp[(4) - (5)]), 0); ;}
    break;

  case 9:

/* Line 1455 of yacc.c  */
#line 78 "hcl.y"
    { (yyval)=(yyvsp[(1) - (1)]); ;}
    break;

  case 10:

/* Line 1455 of yacc.c  */
#line 79 "hcl.y"
    { (yyval)=(yyvsp[(1) - (1)]); ;}
    break;

  case 11:

/* Line 1455 of yacc.c  */
#line 80 "hcl.y"
    { (yyval)=(yyvsp[(2) - (3)]); ;}
    break;

  case 12:

/* Line 1455 of yacc.c  */
#line 81 "hcl.y"
    { (yyval)=make_not((yyvsp[(2) - (2)])); ;}
    break;

  case 13:

/* Line 1455 of yacc.c  */
#line 82 "hcl.y"
    { (yyval)=make_and((yyvsp[(1) - (3)]), (yyvsp[(3) - (3)])); ;}
    break;

  case 14:

/* Line 1455 of yacc.c  */
#line 83 "hcl.y"
    { (yyval)=make_or((yyvsp[(1) - (3)]), (yyvsp[(3) - (3)])); ;}
    break;

  case 15:

/* Line 1455 of yacc.c  */
#line 84 "hcl.y"
    { (yyval)=make_comp((yyvsp[(2) - (3)]),(yyvsp[(1) - (3)]),(yyvsp[(3) - (3)])); ;}
    break;

  case 16:

/* Line 1455 of yacc.c  */
#line 85 "hcl.y"
    { (yyval)=make_ele((yyvsp[(1) - (5)]), (yyvsp[(4) - (5)]));;}
    break;

  case 17:

/* Line 1455 of yacc.c  */
#line 86 "hcl.y"
    { (yyval)=(yyvsp[(2) - (3)]); ;}
    break;

  case 18:

/* Line 1455 of yacc.c  */
#line 90 "hcl.y"
    { (yyval)=(yyvsp[(1) - (1)]); ;}
    break;

  case 19:

/* Line 1455 of yacc.c  */
#line 91 "hcl.y"
    { (yyval)=concat((yyvsp[(1) - (3)]), (yyvsp[(3) - (3)])); ;}
    break;

  case 20:

/* Line 1455 of yacc.c  */
#line 94 "hcl.y"
    { (yyval)=NULL; ;}
    break;

  case 21:

/* Line 1455 of yacc.c  */
#line 95 "hcl.y"
    { (yyval)=concat((yyvsp[(1) - (5)]), make_case((yyvsp[(2) - (5)]), (yyvsp[(4) - (5)])));;}
    break;



/* Line 1455 of yacc.c  */
#line 1544 "hcl.tab.c"
      default: break;
    }
  YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);

  YYPOPSTACK (yylen);
  yylen = 0;
  YY_STACK_PRINT (yyss, yyssp);

  *++yyvsp = yyval;

  /* Now `shift' the result of the reduction.  Determine what state
     that goes to, based on the state we popped back to and the rule
     number reduced by.  */

  yyn = yyr1[yyn];

  yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
  if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
    yystate = yytable[yystate];
  else
    yystate = yydefgoto[yyn - YYNTOKENS];

  goto yynewstate;


/*------------------------------------.
| yyerrlab -- here on detecting error |
`------------------------------------*/
yyerrlab:
  /* If not already recovering from an error, report this error.  */
  if (!yyerrstatus)
    {
      ++yynerrs;
#if ! YYERROR_VERBOSE
      yyerror (YY_("syntax error"));
#else
      {
	YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
	if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
	  {
	    YYSIZE_T yyalloc = 2 * yysize;
	    if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
	      yyalloc = YYSTACK_ALLOC_MAXIMUM;
	    if (yymsg != yymsgbuf)
	      YYSTACK_FREE (yymsg);
	    yymsg = (char *) YYSTACK_ALLOC (yyalloc);
	    if (yymsg)
	      yymsg_alloc = yyalloc;
	    else
	      {
		yymsg = yymsgbuf;
		yymsg_alloc = sizeof yymsgbuf;
	      }
	  }

	if (0 < yysize && yysize <= yymsg_alloc)
	  {
	    (void) yysyntax_error (yymsg, yystate, yychar);
	    yyerror (yymsg);
	  }
	else
	  {
	    yyerror (YY_("syntax error"));
	    if (yysize != 0)
	      goto yyexhaustedlab;
	  }
      }
#endif
    }



  if (yyerrstatus == 3)
    {
      /* If just tried and failed to reuse lookahead token after an
	 error, discard it.  */

      if (yychar <= YYEOF)
	{
	  /* Return failure if at end of input.  */
	  if (yychar == YYEOF)
	    YYABORT;
	}
      else
	{
	  yydestruct ("Error: discarding",
		      yytoken, &yylval);
	  yychar = YYEMPTY;
	}
    }

  /* Else will try to reuse lookahead token after shifting the error
     token.  */
  goto yyerrlab1;


/*---------------------------------------------------.
| yyerrorlab -- error raised explicitly by YYERROR.  |
`---------------------------------------------------*/
yyerrorlab:

  /* Pacify compilers like GCC when the user code never invokes
     YYERROR and the label yyerrorlab therefore never appears in user
     code.  */
  if (/*CONSTCOND*/ 0)
     goto yyerrorlab;

  /* Do not reclaim the symbols of the rule which action triggered
     this YYERROR.  */
  YYPOPSTACK (yylen);
  yylen = 0;
  YY_STACK_PRINT (yyss, yyssp);
  yystate = *yyssp;
  goto yyerrlab1;


/*-------------------------------------------------------------.
| yyerrlab1 -- common code for both syntax error and YYERROR.  |
`-------------------------------------------------------------*/
yyerrlab1:
  yyerrstatus = 3;	/* Each real token shifted decrements this.  */

  for (;;)
    {
      yyn = yypact[yystate];
      if (yyn != YYPACT_NINF)
	{
	  yyn += YYTERROR;
	  if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
	    {
	      yyn = yytable[yyn];
	      if (0 < yyn)
		break;
	    }
	}

      /* Pop the current state because it cannot handle the error token.  */
      if (yyssp == yyss)
	YYABORT;


      yydestruct ("Error: popping",
		  yystos[yystate], yyvsp);
      YYPOPSTACK (1);
      yystate = *yyssp;
      YY_STACK_PRINT (yyss, yyssp);
    }

  *++yyvsp = yylval;


  /* Shift the error token.  */
  YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);

  yystate = yyn;
  goto yynewstate;


/*-------------------------------------.
| yyacceptlab -- YYACCEPT comes here.  |
`-------------------------------------*/
yyacceptlab:
  yyresult = 0;
  goto yyreturn;

/*-----------------------------------.
| yyabortlab -- YYABORT comes here.  |
`-----------------------------------*/
yyabortlab:
  yyresult = 1;
  goto yyreturn;

#if !defined(yyoverflow) || YYERROR_VERBOSE
/*-------------------------------------------------.
| yyexhaustedlab -- memory exhaustion comes here.  |
`-------------------------------------------------*/
yyexhaustedlab:
  yyerror (YY_("memory exhausted"));
  yyresult = 2;
  /* Fall through.  */
#endif

yyreturn:
  if (yychar != YYEMPTY)
     yydestruct ("Cleanup: discarding lookahead",
		 yytoken, &yylval);
  /* Do not reclaim the symbols of the rule which action triggered
     this YYABORT or YYACCEPT.  */
  YYPOPSTACK (yylen);
  YY_STACK_PRINT (yyss, yyssp);
  while (yyssp != yyss)
    {
      yydestruct ("Cleanup: popping",
		  yystos[*yyssp], yyvsp);
      YYPOPSTACK (1);
    }
#ifndef yyoverflow
  if (yyss != yyssa)
    YYSTACK_FREE (yyss);
#endif
#if YYERROR_VERBOSE
  if (yymsg != yymsgbuf)
    YYSTACK_FREE (yymsg);
#endif
  /* Make sure YYID is used.  */
  return YYID (yyresult);
}



sim/misc/hcl.tab.h0000600005644400000240000000455711715057304012600 0ustar  tmsgrad
/* A Bison parser, made by GNU Bison 2.4.1.  */

/* Skeleton interface for Bison's Yacc-like parsers in C
   
      Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
   Free Software Foundation, Inc.
   
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
   
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

/* As a special exception, you may create a larger work that contains
   part or all of the Bison parser skeleton and distribute that work
   under terms of your choice, so long as that work isn't itself a
   parser generator using the skeleton or a modified version thereof
   as a parser skeleton.  Alternatively, if you modify or redistribute
   the parser skeleton itself, you may (at your option) remove this
   special exception, which will cause the skeleton and the resulting
   Bison output files to be licensed under the GNU General Public
   License without this special exception.
   
   This special exception was added by the Free Software Foundation in
   version 2.2 of Bison.  */


/* Tokens.  */
#ifndef YYTOKENTYPE
# define YYTOKENTYPE
   /* Put the tokens into the symbol table, so that GDB and other debuggers
      know about them.  */
   enum yytokentype {
     QUOTE = 258,
     BOOLARG = 259,
     BOOL = 260,
     INTARG = 261,
     INT = 262,
     QSTRING = 263,
     VAR = 264,
     NUM = 265,
     ASSIGN = 266,
     SEMI = 267,
     COLON = 268,
     COMMA = 269,
     LPAREN = 270,
     RPAREN = 271,
     LBRACE = 272,
     RBRACE = 273,
     LBRACK = 274,
     RBRACK = 275,
     AND = 276,
     OR = 277,
     NOT = 278,
     COMP = 279,
     IN = 280
   };
#endif



#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
typedef int YYSTYPE;
# define YYSTYPE_IS_TRIVIAL 1
# define yystype YYSTYPE /* obsolescent; will be withdrawn */
# define YYSTYPE_IS_DECLARED 1
#endif

extern YYSTYPE yylval;


sim/misc/yas-grammar.lex0000700005644400000240000000245411171132211014024 0ustar  tmsgrad/* Grammar for Y86 Assembler */
 #include "yas.h"
 unsigned int atoh(const char *);

Instr         rrmovl|cmovle|cmovl|cmove|cmovne|cmovge|cmovg|rmmovl|mrmovl|irmovl|addl|subl|andl|xorl|jmp|jle|jl|je|jne|jge|jg|call|ret|pushl|popl|"."byte|"."word|"."long|"."pos|"."align|halt|nop|iaddl|leave
Letter        [a-zA-Z]
Digit         [0-9]
Ident         {Letter}({Letter}|{Digit}|_)*
Hex           [0-9a-fA-F]
Blank         [ \t]
Newline       [\n\r]
Return        [\r]
Char          [^\n\r]
Reg           %eax|%ecx|%edx|%ebx|%esi|%edi|%esp|%ebp

%x ERR COM
%%

^{Char}*{Return}*{Newline}      { save_line(yytext); REJECT;} /* Snarf input line */
#{Char}*{Return}*{Newline}      {finish_line(); lineno++;}
"//"{Char}*{Return}*{Newline}     {finish_line(); lineno++;}
"/*"{Char}*{Return}*{Newline}   {finish_line(); lineno++;}
{Blank}*{Return}*{Newline}      {finish_line(); lineno++;}


{Blank}+          ;
"$"+              ;
{Instr}           add_instr(yytext);
{Reg}             add_reg(yytext);
[-]?{Digit}+      add_num(atoi(yytext));
"0"[xX]{Hex}+     add_num(atoh(yytext));
[():,]            add_punct(*yytext);
{Ident}           add_ident(yytext);
{Char}            {; BEGIN ERR;}
<ERR>{Char}*{Newline} {fail("Invalid line"); lineno++; BEGIN 0;}
%%

unsigned int atoh(const char *s)
{
    return(strtoul(s, NULL, 16));
}
sim/misc/lex.yy.c0000600005644400000240000013770311715057304012510 0ustar  tmsgrad
#line 3 "lex.yy.c"

#define  YY_INT_ALIGNED short int

/* A lexical scanner generated by flex */

#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
#define YY_FLEX_SUBMINOR_VERSION 35
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif

/* First, we deal with  platform-specific or compiler-specific issues. */

/* begin standard C headers. */
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <stdlib.h>

/* end standard C headers. */

/* flex integer type definitions */

#ifndef FLEXINT_H
#define FLEXINT_H

/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */

#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L

/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
 * if you want the limit (max/min) macros for int types. 
 */
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
#endif

#include <inttypes.h>
typedef int8_t flex_int8_t;
typedef uint8_t flex_uint8_t;
typedef int16_t flex_int16_t;
typedef uint16_t flex_uint16_t;
typedef int32_t flex_int32_t;
typedef uint32_t flex_uint32_t;
#else
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
typedef unsigned char flex_uint8_t; 
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;

/* Limits of integral types. */
#ifndef INT8_MIN
#define INT8_MIN               (-128)
#endif
#ifndef INT16_MIN
#define INT16_MIN              (-32767-1)
#endif
#ifndef INT32_MIN
#define INT32_MIN              (-2147483647-1)
#endif
#ifndef INT8_MAX
#define INT8_MAX               (127)
#endif
#ifndef INT16_MAX
#define INT16_MAX              (32767)
#endif
#ifndef INT32_MAX
#define INT32_MAX              (2147483647)
#endif
#ifndef UINT8_MAX
#define UINT8_MAX              (255U)
#endif
#ifndef UINT16_MAX
#define UINT16_MAX             (65535U)
#endif
#ifndef UINT32_MAX
#define UINT32_MAX             (4294967295U)
#endif

#endif /* ! C99 */

#endif /* ! FLEXINT_H */

#ifdef __cplusplus

/* The "const" storage-class-modifier is valid. */
#define YY_USE_CONST

#else	/* ! __cplusplus */

/* C99 requires __STDC__ to be defined as 1. */
#if defined (__STDC__)

#define YY_USE_CONST

#endif	/* defined (__STDC__) */
#endif	/* ! __cplusplus */

#ifdef YY_USE_CONST
#define yyconst const
#else
#define yyconst
#endif

/* Returned upon end-of-file. */
#define YY_NULL 0

/* Promotes a possibly negative, possibly signed char to an unsigned
 * integer for use as an array index.  If the signed char is negative,
 * we want to instead treat it as an 8-bit unsigned char, hence the
 * double cast.
 */
#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)

/* Enter a start condition.  This macro really ought to take a parameter,
 * but we do it the disgusting crufty way forced on us by the ()-less
 * definition of BEGIN.
 */
#define BEGIN (yy_start) = 1 + 2 *

/* Translate the current start state into a value that can be later handed
 * to BEGIN to return to the state.  The YYSTATE alias is for lex
 * compatibility.
 */
#define YY_START (((yy_start) - 1) / 2)
#define YYSTATE YY_START

/* Action number for EOF rule of a given start state. */
#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)

/* Special action meaning "start processing a new file". */
#define YY_NEW_FILE yyrestart(yyin  )

#define YY_END_OF_BUFFER_CHAR 0

/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
#ifdef __ia64__
/* On IA-64, the buffer size is 16k, not 8k.
 * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
 * Ditto for the __ia64__ case accordingly.
 */
#define YY_BUF_SIZE 32768
#else
#define YY_BUF_SIZE 16384
#endif /* __ia64__ */
#endif

/* The state buf must be large enough to hold one state per character in the main buffer.
 */
#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))

#ifndef YY_TYPEDEF_YY_BUFFER_STATE
#define YY_TYPEDEF_YY_BUFFER_STATE
typedef struct yy_buffer_state *YY_BUFFER_STATE;
#endif

extern int yyleng;

extern FILE *yyin, *yyout;

#define EOB_ACT_CONTINUE_SCAN 0
#define EOB_ACT_END_OF_FILE 1
#define EOB_ACT_LAST_MATCH 2

    #define YY_LESS_LINENO(n)
    
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
	do \
		{ \
		/* Undo effects of setting up yytext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
		*yy_cp = (yy_hold_char); \
		YY_RESTORE_YY_MORE_OFFSET \
		(yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
		YY_DO_BEFORE_ACTION; /* set up yytext again */ \
		} \
	while ( 0 )

#define unput(c) yyunput( c, (yytext_ptr)  )

#ifndef YY_TYPEDEF_YY_SIZE_T
#define YY_TYPEDEF_YY_SIZE_T
typedef size_t yy_size_t;
#endif

#ifndef YY_STRUCT_YY_BUFFER_STATE
#define YY_STRUCT_YY_BUFFER_STATE
struct yy_buffer_state
	{
	FILE *yy_input_file;

	char *yy_ch_buf;		/* input buffer */
	char *yy_buf_pos;		/* current position in input buffer */

	/* Size of input buffer in bytes, not including room for EOB
	 * characters.
	 */
	yy_size_t yy_buf_size;

	/* Number of characters read into yy_ch_buf, not including EOB
	 * characters.
	 */
	int yy_n_chars;

	/* Whether we "own" the buffer - i.e., we know we created it,
	 * and can realloc() it to grow it, and should free() it to
	 * delete it.
	 */
	int yy_is_our_buffer;

	/* Whether this is an "interactive" input source; if so, and
	 * if we're using stdio for input, then we want to use getc()
	 * instead of fread(), to make sure we stop fetching input after
	 * each newline.
	 */
	int yy_is_interactive;

	/* Whether we're considered to be at the beginning of a line.
	 * If so, '^' rules will be active on the next match, otherwise
	 * not.
	 */
	int yy_at_bol;

    int yy_bs_lineno; /**< The line count. */
    int yy_bs_column; /**< The column count. */
    
	/* Whether to try to fill the input buffer when we reach the
	 * end of it.
	 */
	int yy_fill_buffer;

	int yy_buffer_status;

#define YY_BUFFER_NEW 0
#define YY_BUFFER_NORMAL 1
	/* When an EOF's been seen but there's still some text to process
	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
	 * shouldn't try reading from the input source any more.  We might
	 * still have a bunch of tokens to match, though, because of
	 * possible backing-up.
	 *
	 * When we actually see the EOF, we change the status to "new"
	 * (via yyrestart()), so that the user can continue scanning by
	 * just pointing yyin at a new input file.
	 */
#define YY_BUFFER_EOF_PENDING 2

	};
#endif /* !YY_STRUCT_YY_BUFFER_STATE */

/* Stack of input buffers. */
static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */

/* We provide macros for accessing buffer states in case in the
 * future we want to put the buffer states in a more general
 * "scanner state".
 *
 * Returns the top of the stack, or NULL.
 */
#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
                          ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
                          : NULL)

/* Same as previous macro, but useful when we know that the buffer stack is not
 * NULL or when we need an lvalue. For internal use only.
 */
#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]

/* yy_hold_char holds the character lost when yytext is formed. */
static char yy_hold_char;
static int yy_n_chars;		/* number of characters read into yy_ch_buf */
int yyleng;

/* Points to current character in buffer. */
static char *yy_c_buf_p = (char *) 0;
static int yy_init = 0;		/* whether we need to initialize */
static int yy_start = 0;	/* start state number */

/* Flag which is used to allow yywrap()'s to do buffer switches
 * instead of setting up a fresh yyin.  A bit of a hack ...
 */
static int yy_did_buffer_switch_on_eof;

void yyrestart (FILE *input_file  );
void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer  );
YY_BUFFER_STATE yy_create_buffer (FILE *file,int size  );
void yy_delete_buffer (YY_BUFFER_STATE b  );
void yy_flush_buffer (YY_BUFFER_STATE b  );
void yypush_buffer_state (YY_BUFFER_STATE new_buffer  );
void yypop_buffer_state (void );

static void yyensure_buffer_stack (void );
static void yy_load_buffer_state (void );
static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file  );

#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )

YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size  );
YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str  );
YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len  );

void *yyalloc (yy_size_t  );
void *yyrealloc (void *,yy_size_t  );
void yyfree (void *  );

#define yy_new_buffer yy_create_buffer

#define yy_set_interactive(is_interactive) \
	{ \
	if ( ! YY_CURRENT_BUFFER ){ \
        yyensure_buffer_stack (); \
		YY_CURRENT_BUFFER_LVALUE =    \
            yy_create_buffer(yyin,YY_BUF_SIZE ); \
	} \
	YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
	}

#define yy_set_bol(at_bol) \
	{ \
	if ( ! YY_CURRENT_BUFFER ){\
        yyensure_buffer_stack (); \
		YY_CURRENT_BUFFER_LVALUE =    \
            yy_create_buffer(yyin,YY_BUF_SIZE ); \
	} \
	YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
	}

#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)

/* Begin user sect3 */

typedef unsigned char YY_CHAR;

FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;

typedef int yy_state_type;

extern int yylineno;

int yylineno = 1;

extern char *yytext;
#define yytext_ptr yytext

static yy_state_type yy_get_previous_state (void );
static yy_state_type yy_try_NUL_trans (yy_state_type current_state  );
static int yy_get_next_buffer (void );
static void yy_fatal_error (yyconst char msg[]  );

/* Done after the current pattern has been matched and before the
 * corresponding action - sets up yytext.
 */
#define YY_DO_BEFORE_ACTION \
	(yytext_ptr) = yy_bp; \
	yyleng = (size_t) (yy_cp - yy_bp); \
	(yy_hold_char) = *yy_cp; \
	*yy_cp = '\0'; \
	(yy_c_buf_p) = yy_cp;

#define YY_NUM_RULES 33
#define YY_END_OF_BUFFER 34
/* This struct is not used in this scanner,
   but its presence is necessary. */
struct yy_trans_info
	{
	flex_int32_t yy_verify;
	flex_int32_t yy_nxt;
	};
static yyconst flex_int16_t yy_accept[60] =
    {   0,
        0,    0,   34,   33,    1,    2,   32,   33,   33,   33,
       18,   19,   17,   33,   12,   16,   15,   28,   14,   30,
       11,   22,   23,   11,   11,   11,   20,   33,   21,   26,
        0,    3,   24,    0,   10,   13,   12,   29,   27,   31,
       11,   11,    9,   11,   25,   13,   11,    8,   11,    6,
       11,   11,   11,   11,    4,   11,    7,    5,    0
    } ;

static yyconst flex_int32_t yy_ec[256] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
        1,    2,    2,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    2,    4,    1,    5,    1,    1,    6,    7,    8,
        9,    1,    1,   10,   11,    1,    1,   12,   12,   12,
       12,   12,   12,   12,   12,   12,   12,   13,   14,   15,
       16,   17,    1,    1,   18,   18,   18,   18,   18,   18,
       18,   18,   18,   18,   18,   18,   18,   18,   18,   18,
       18,   18,   18,   18,   18,   18,   18,   18,   18,   18,
       19,    1,   20,    1,   21,    1,   18,   22,   18,   18,

       23,   18,   24,   18,   25,   18,   18,   26,   18,   27,
       28,   18,   29,   18,   30,   31,   32,   18,   18,   18,
       18,   18,   33,   34,   35,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,

        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1
    } ;

static yyconst flex_int32_t yy_meta[36] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    2,    1,    1,    1,    1,    1,    2,    1,    1,
        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
        2,    2,    1,    1,    1
    } ;

static yyconst flex_int16_t yy_base[63] =
    {   0,
        0,    0,   71,   72,   72,   72,   54,   66,   62,   60,
       72,   72,   72,   54,   53,   72,   72,   48,   47,   46,
        0,   72,   72,   33,   33,   27,   72,   24,   72,   72,
       54,   72,   72,   49,   72,   43,   42,   72,   72,   72,
        0,   25,   21,   23,   72,   38,   23,   18,   16,   16,
       20,   21,   18,   18,    0,   17,    0,    0,   72,   35,
       37,   38
    } ;

static yyconst flex_int16_t yy_def[63] =
    {   0,
       59,    1,   59,   59,   59,   59,   59,   60,   59,   61,
       59,   59,   59,   59,   59,   59,   59,   59,   59,   59,
       62,   59,   59,   62,   62,   62,   59,   59,   59,   59,
       60,   59,   59,   61,   59,   59,   59,   59,   59,   59,
       62,   62,   62,   62,   59,   59,   62,   62,   62,   62,
       62,   62,   62,   62,   62,   62,   62,   62,    0,   59,
       59,   59
    } ;

static yyconst flex_int16_t yy_nxt[108] =
    {   0,
        4,    5,    6,    7,    8,    9,   10,   11,   12,   13,
       14,   15,   16,   17,   18,   19,   20,   21,   22,   23,
        4,   24,   21,   21,   25,   21,   21,   21,   26,   21,
       21,   21,   27,   28,   29,   31,   31,   34,   34,   41,
       58,   57,   56,   55,   54,   53,   52,   51,   50,   46,
       49,   48,   47,   37,   46,   35,   32,   45,   44,   43,
       42,   40,   39,   38,   37,   36,   35,   33,   32,   30,
       59,    3,   59,   59,   59,   59,   59,   59,   59,   59,
       59,   59,   59,   59,   59,   59,   59,   59,   59,   59,
       59,   59,   59,   59,   59,   59,   59,   59,   59,   59,

       59,   59,   59,   59,   59,   59,   59
    } ;

static yyconst flex_int16_t yy_chk[108] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,   60,   60,   61,   61,   62,
       56,   54,   53,   52,   51,   50,   49,   48,   47,   46,
       44,   43,   42,   37,   36,   34,   31,   28,   26,   25,
       24,   20,   19,   18,   15,   14,   10,    9,    8,    7,
        3,   59,   59,   59,   59,   59,   59,   59,   59,   59,
       59,   59,   59,   59,   59,   59,   59,   59,   59,   59,
       59,   59,   59,   59,   59,   59,   59,   59,   59,   59,

       59,   59,   59,   59,   59,   59,   59
    } ;

static yy_state_type yy_last_accepting_state;
static char *yy_last_accepting_cpos;

extern int yy_flex_debug;
int yy_flex_debug = 0;

/* The intent behind this definition is that it'll catch
 * any uses of REJECT which flex missed.
 */
#define REJECT reject_used_but_not_detected
#define yymore() yymore_used_but_not_detected
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
char *yytext;
#line 1 "hcl.lex"
#line 2 "hcl.lex"
#include <stdio.h>
#include "node.h"
#define YYSTYPE node_ptr
#include "hcl.tab.h"


extern YYSTYPE yylval;
extern int lineno;
#line 509 "lex.yy.c"

#define INITIAL 0

#ifndef YY_NO_UNISTD_H
/* Special case for "unistd.h", since it is non-ANSI. We include it way
 * down here because we want the user's section 1 to have been scanned first.
 * The user has a chance to override it with an option.
 */
#include <unistd.h>
#endif

#ifndef YY_EXTRA_TYPE
#define YY_EXTRA_TYPE void *
#endif

static int yy_init_globals (void );

/* Accessor methods to globals.
   These are made visible to non-reentrant scanners for convenience. */

int yylex_destroy (void );

int yyget_debug (void );

void yyset_debug (int debug_flag  );

YY_EXTRA_TYPE yyget_extra (void );

void yyset_extra (YY_EXTRA_TYPE user_defined  );

FILE *yyget_in (void );

void yyset_in  (FILE * in_str  );

FILE *yyget_out (void );

void yyset_out  (FILE * out_str  );

int yyget_leng (void );

char *yyget_text (void );

int yyget_lineno (void );

void yyset_lineno (int line_number  );

/* Macros after this point can all be overridden by user definitions in
 * section 1.
 */

#ifndef YY_SKIP_YYWRAP
#ifdef __cplusplus
extern "C" int yywrap (void );
#else
extern int yywrap (void );
#endif
#endif

    static void yyunput (int c,char *buf_ptr  );
    
#ifndef yytext_ptr
static void yy_flex_strncpy (char *,yyconst char *,int );
#endif

#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * );
#endif

#ifndef YY_NO_INPUT

#ifdef __cplusplus
static int yyinput (void );
#else
static int input (void );
#endif

#endif

/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#ifdef __ia64__
/* On IA-64, the buffer size is 16k, not 8k */
#define YY_READ_BUF_SIZE 16384
#else
#define YY_READ_BUF_SIZE 8192
#endif /* __ia64__ */
#endif

/* Copy whatever the last rule matched to the standard output. */
#ifndef ECHO
/* This used to be an fputs(), but since the string might contain NUL's,
 * we now use fwrite().
 */
#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
#endif

/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
 * is returned in "result".
 */
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
	if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
		{ \
		int c = '*'; \
		size_t n; \
		for ( n = 0; n < max_size && \
			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
			buf[n] = (char) c; \
		if ( c == '\n' ) \
			buf[n++] = (char) c; \
		if ( c == EOF && ferror( yyin ) ) \
			YY_FATAL_ERROR( "input in flex scanner failed" ); \
		result = n; \
		} \
	else \
		{ \
		errno=0; \
		while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
			{ \
			if( errno != EINTR) \
				{ \
				YY_FATAL_ERROR( "input in flex scanner failed" ); \
				break; \
				} \
			errno=0; \
			clearerr(yyin); \
			} \
		}\
\

#endif

/* No semi-colon after return; correct usage is to write "yyterminate();" -
 * we don't want an extra ';' after the "return" because that will cause
 * some compilers to complain about unreachable statements.
 */
#ifndef yyterminate
#define yyterminate() return YY_NULL
#endif

/* Number of entries by which start-condition stack grows. */
#ifndef YY_START_STACK_INCR
#define YY_START_STACK_INCR 25
#endif

/* Report a fatal error. */
#ifndef YY_FATAL_ERROR
#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
#endif

/* end tables serialization structures and prototypes */

/* Default declaration of generated scanner - a define so the user can
 * easily add parameters.
 */
#ifndef YY_DECL
#define YY_DECL_IS_OURS 1

extern int yylex (void);

#define YY_DECL int yylex (void)
#endif /* !YY_DECL */

/* Code executed at the beginning of each rule, after yytext and yyleng
 * have been set up.
 */
#ifndef YY_USER_ACTION
#define YY_USER_ACTION
#endif

/* Code executed at the end of each rule. */
#ifndef YY_BREAK
#define YY_BREAK break;
#endif

#define YY_RULE_SETUP \
	YY_USER_ACTION

/** The main scanner function which does all the work.
 */
YY_DECL
{
	register yy_state_type yy_current_state;
	register char *yy_cp, *yy_bp;
	register int yy_act;
    
#line 11 "hcl.lex"

#line 698 "lex.yy.c"

	if ( !(yy_init) )
		{
		(yy_init) = 1;

#ifdef YY_USER_INIT
		YY_USER_INIT;
#endif

		if ( ! (yy_start) )
			(yy_start) = 1;	/* first start state */

		if ( ! yyin )
			yyin = stdin;

		if ( ! yyout )
			yyout = stdout;

		if ( ! YY_CURRENT_BUFFER ) {
			yyensure_buffer_stack ();
			YY_CURRENT_BUFFER_LVALUE =
				yy_create_buffer(yyin,YY_BUF_SIZE );
		}

		yy_load_buffer_state( );
		}

	while ( 1 )		/* loops until end-of-file is reached */
		{
		yy_cp = (yy_c_buf_p);

		/* Support of yytext. */
		*yy_cp = (yy_hold_char);

		/* yy_bp points to the position in yy_ch_buf of the start of
		 * the current run.
		 */
		yy_bp = yy_cp;

		yy_current_state = (yy_start);
yy_match:
		do
			{
			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
			if ( yy_accept[yy_current_state] )
				{
				(yy_last_accepting_state) = yy_current_state;
				(yy_last_accepting_cpos) = yy_cp;
				}
			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
				{
				yy_current_state = (int) yy_def[yy_current_state];
				if ( yy_current_state >= 60 )
					yy_c = yy_meta[(unsigned int) yy_c];
				}
			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
			++yy_cp;
			}
		while ( yy_base[yy_current_state] != 72 );

yy_find_action:
		yy_act = yy_accept[yy_current_state];
		if ( yy_act == 0 )
			{ /* have to back up */
			yy_cp = (yy_last_accepting_cpos);
			yy_current_state = (yy_last_accepting_state);
			yy_act = yy_accept[yy_current_state];
			}

		YY_DO_BEFORE_ACTION;

do_action:	/* This label is used only to access EOF actions. */

		switch ( yy_act )
	{ /* beginning of action switch */
			case 0: /* must back up */
			/* undo the effects of YY_DO_BEFORE_ACTION */
			*yy_cp = (yy_hold_char);
			yy_cp = (yy_last_accepting_cpos);
			yy_current_state = (yy_last_accepting_state);
			goto yy_find_action;

case 1:
YY_RULE_SETUP
#line 12 "hcl.lex"
;
	YY_BREAK
case 2:
/* rule 2 can match eol */
YY_RULE_SETUP
#line 13 "hcl.lex"
lineno++;
	YY_BREAK
case 3:
/* rule 3 can match eol */
YY_RULE_SETUP
#line 14 "hcl.lex"
lineno++ ;
	YY_BREAK
case 4:
YY_RULE_SETUP
#line 15 "hcl.lex"
return(QUOTE);
	YY_BREAK
case 5:
YY_RULE_SETUP
#line 16 "hcl.lex"
return(BOOLARG);
	YY_BREAK
case 6:
YY_RULE_SETUP
#line 17 "hcl.lex"
return(BOOL);
	YY_BREAK
case 7:
YY_RULE_SETUP
#line 18 "hcl.lex"
return(INTARG);
	YY_BREAK
case 8:
YY_RULE_SETUP
#line 19 "hcl.lex"
return(INT);
	YY_BREAK
case 9:
YY_RULE_SETUP
#line 20 "hcl.lex"
return(IN);
	YY_BREAK
case 10:
/* rule 10 can match eol */
YY_RULE_SETUP
#line 21 "hcl.lex"
yylval = make_quote(yytext); return(QSTRING);
	YY_BREAK
case 11:
YY_RULE_SETUP
#line 22 "hcl.lex"
yylval = make_var(yytext); return(VAR);
	YY_BREAK
case 12:
YY_RULE_SETUP
#line 23 "hcl.lex"
yylval = make_num(yytext); return(NUM);
	YY_BREAK
case 13:
YY_RULE_SETUP
#line 24 "hcl.lex"
yylval = make_num(yytext); return(NUM);
	YY_BREAK
case 14:
YY_RULE_SETUP
#line 25 "hcl.lex"
return(ASSIGN);
	YY_BREAK
case 15:
YY_RULE_SETUP
#line 26 "hcl.lex"
return(SEMI);
	YY_BREAK
case 16:
YY_RULE_SETUP
#line 27 "hcl.lex"
return(COLON);
	YY_BREAK
case 17:
YY_RULE_SETUP
#line 28 "hcl.lex"
return(COMMA);
	YY_BREAK
case 18:
YY_RULE_SETUP
#line 29 "hcl.lex"
return(LPAREN);
	YY_BREAK
case 19:
YY_RULE_SETUP
#line 30 "hcl.lex"
return(RPAREN);
	YY_BREAK
case 20:
YY_RULE_SETUP
#line 31 "hcl.lex"
return(LBRACE);
	YY_BREAK
case 21:
YY_RULE_SETUP
#line 32 "hcl.lex"
return(RBRACE);
	YY_BREAK
case 22:
YY_RULE_SETUP
#line 33 "hcl.lex"
return(LBRACK);
	YY_BREAK
case 23:
YY_RULE_SETUP
#line 34 "hcl.lex"
return(RBRACK);
	YY_BREAK
case 24:
YY_RULE_SETUP
#line 35 "hcl.lex"
return(AND);
	YY_BREAK
case 25:
YY_RULE_SETUP
#line 36 "hcl.lex"
return(OR);
	YY_BREAK
case 26:
YY_RULE_SETUP
#line 37 "hcl.lex"
yylval = make_var(yytext); return(COMP);
	YY_BREAK
case 27:
YY_RULE_SETUP
#line 38 "hcl.lex"
yylval = make_var(yytext); return(COMP);
	YY_BREAK
case 28:
YY_RULE_SETUP
#line 39 "hcl.lex"
yylval = make_var(yytext); return(COMP);
	YY_BREAK
case 29:
YY_RULE_SETUP
#line 40 "hcl.lex"
yylval = make_var(yytext); return(COMP);
	YY_BREAK
case 30:
YY_RULE_SETUP
#line 41 "hcl.lex"
yylval = make_var(yytext); return(COMP);
	YY_BREAK
case 31:
YY_RULE_SETUP
#line 42 "hcl.lex"
yylval = make_var(yytext); return(COMP);
	YY_BREAK
case 32:
YY_RULE_SETUP
#line 43 "hcl.lex"
return(NOT);
	YY_BREAK
case 33:
YY_RULE_SETUP
#line 44 "hcl.lex"
ECHO;
	YY_BREAK
#line 949 "lex.yy.c"
case YY_STATE_EOF(INITIAL):
	yyterminate();

	case YY_END_OF_BUFFER:
		{
		/* Amount of text matched not including the EOB char. */
		int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;

		/* Undo the effects of YY_DO_BEFORE_ACTION. */
		*yy_cp = (yy_hold_char);
		YY_RESTORE_YY_MORE_OFFSET

		if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
			{
			/* We're scanning a new file or input source.  It's
			 * possible that this happened because the user
			 * just pointed yyin at a new source and called
			 * yylex().  If so, then we have to assure
			 * consistency between YY_CURRENT_BUFFER and our
			 * globals.  Here is the right place to do so, because
			 * this is the first action (other than possibly a
			 * back-up) that will match for the new input source.
			 */
			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
			YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
			}

		/* Note that here we test for yy_c_buf_p "<=" to the position
		 * of the first EOB in the buffer, since yy_c_buf_p will
		 * already have been incremented past the NUL character
		 * (since all states make transitions on EOB to the
		 * end-of-buffer state).  Contrast this with the test
		 * in input().
		 */
		if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
			{ /* This was really a NUL. */
			yy_state_type yy_next_state;

			(yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;

			yy_current_state = yy_get_previous_state(  );

			/* Okay, we're now positioned to make the NUL
			 * transition.  We couldn't have
			 * yy_get_previous_state() go ahead and do it
			 * for us because it doesn't know how to deal
			 * with the possibility of jamming (and we don't
			 * want to build jamming into it because then it
			 * will run more slowly).
			 */

			yy_next_state = yy_try_NUL_trans( yy_current_state );

			yy_bp = (yytext_ptr) + YY_MORE_ADJ;

			if ( yy_next_state )
				{
				/* Consume the NUL. */
				yy_cp = ++(yy_c_buf_p);
				yy_current_state = yy_next_state;
				goto yy_match;
				}

			else
				{
				yy_cp = (yy_c_buf_p);
				goto yy_find_action;
				}
			}

		else switch ( yy_get_next_buffer(  ) )
			{
			case EOB_ACT_END_OF_FILE:
				{
				(yy_did_buffer_switch_on_eof) = 0;

				if ( yywrap( ) )
					{
					/* Note: because we've taken care in
					 * yy_get_next_buffer() to have set up
					 * yytext, we can now set up
					 * yy_c_buf_p so that if some total
					 * hoser (like flex itself) wants to
					 * call the scanner after we return the
					 * YY_NULL, it'll still work - another
					 * YY_NULL will get returned.
					 */
					(yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;

					yy_act = YY_STATE_EOF(YY_START);
					goto do_action;
					}

				else
					{
					if ( ! (yy_did_buffer_switch_on_eof) )
						YY_NEW_FILE;
					}
				break;
				}

			case EOB_ACT_CONTINUE_SCAN:
				(yy_c_buf_p) =
					(yytext_ptr) + yy_amount_of_matched_text;

				yy_current_state = yy_get_previous_state(  );

				yy_cp = (yy_c_buf_p);
				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
				goto yy_match;

			case EOB_ACT_LAST_MATCH:
				(yy_c_buf_p) =
				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];

				yy_current_state = yy_get_previous_state(  );

				yy_cp = (yy_c_buf_p);
				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
				goto yy_find_action;
			}
		break;
		}

	default:
		YY_FATAL_ERROR(
			"fatal flex scanner internal error--no action found" );
	} /* end of action switch */
		} /* end of scanning one token */
} /* end of yylex */

/* yy_get_next_buffer - try to read in a new buffer
 *
 * Returns a code representing an action:
 *	EOB_ACT_LAST_MATCH -
 *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
 *	EOB_ACT_END_OF_FILE - end of file
 */
static int yy_get_next_buffer (void)
{
    	register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
	register char *source = (yytext_ptr);
	register int number_to_move, i;
	int ret_val;

	if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
		YY_FATAL_ERROR(
		"fatal flex scanner internal error--end of buffer missed" );

	if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
		{ /* Don't try to fill the buffer, so this is an EOF. */
		if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
			{
			/* We matched a single character, the EOB, so
			 * treat this as a final EOF.
			 */
			return EOB_ACT_END_OF_FILE;
			}

		else
			{
			/* We matched some text prior to the EOB, first
			 * process it.
			 */
			return EOB_ACT_LAST_MATCH;
			}
		}

	/* Try to read more data. */

	/* First move last chars to start of buffer. */
	number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;

	for ( i = 0; i < number_to_move; ++i )
		*(dest++) = *(source++);

	if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
		/* don't do the read, it's not guaranteed to return an EOF,
		 * just force an EOF
		 */
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;

	else
		{
			int num_to_read =
			YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;

		while ( num_to_read <= 0 )
			{ /* Not enough room in the buffer - grow it. */

			/* just a shorter name for the current buffer */
			YY_BUFFER_STATE b = YY_CURRENT_BUFFER;

			int yy_c_buf_p_offset =
				(int) ((yy_c_buf_p) - b->yy_ch_buf);

			if ( b->yy_is_our_buffer )
				{
				int new_size = b->yy_buf_size * 2;

				if ( new_size <= 0 )
					b->yy_buf_size += b->yy_buf_size / 8;
				else
					b->yy_buf_size *= 2;

				b->yy_ch_buf = (char *)
					/* Include room in for 2 EOB chars. */
					yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2  );
				}
			else
				/* Can't grow it, we don't own it. */
				b->yy_ch_buf = 0;

			if ( ! b->yy_ch_buf )
				YY_FATAL_ERROR(
				"fatal error - scanner input buffer overflow" );

			(yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];

			num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
						number_to_move - 1;

			}

		if ( num_to_read > YY_READ_BUF_SIZE )
			num_to_read = YY_READ_BUF_SIZE;

		/* Read in more data. */
		YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
			(yy_n_chars), (size_t) num_to_read );

		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
		}

	if ( (yy_n_chars) == 0 )
		{
		if ( number_to_move == YY_MORE_ADJ )
			{
			ret_val = EOB_ACT_END_OF_FILE;
			yyrestart(yyin  );
			}

		else
			{
			ret_val = EOB_ACT_LAST_MATCH;
			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
				YY_BUFFER_EOF_PENDING;
			}
		}

	else
		ret_val = EOB_ACT_CONTINUE_SCAN;

	if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
		/* Extend the array by 50%, plus the number we really need. */
		yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
		if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
			YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
	}

	(yy_n_chars) += number_to_move;
	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;

	(yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];

	return ret_val;
}

/* yy_get_previous_state - get the state just before the EOB char was reached */

    static yy_state_type yy_get_previous_state (void)
{
	register yy_state_type yy_current_state;
	register char *yy_cp;
    
	yy_current_state = (yy_start);

	for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
		{
		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
		if ( yy_accept[yy_current_state] )
			{
			(yy_last_accepting_state) = yy_current_state;
			(yy_last_accepting_cpos) = yy_cp;
			}
		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
			{
			yy_current_state = (int) yy_def[yy_current_state];
			if ( yy_current_state >= 60 )
				yy_c = yy_meta[(unsigned int) yy_c];
			}
		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
		}

	return yy_current_state;
}

/* yy_try_NUL_trans - try to make a transition on the NUL character
 *
 * synopsis
 *	next_state = yy_try_NUL_trans( current_state );
 */
    static yy_state_type yy_try_NUL_trans  (yy_state_type yy_current_state )
{
	register int yy_is_jam;
    	register char *yy_cp = (yy_c_buf_p);

	register YY_CHAR yy_c = 1;
	if ( yy_accept[yy_current_state] )
		{
		(yy_last_accepting_state) = yy_current_state;
		(yy_last_accepting_cpos) = yy_cp;
		}
	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
		{
		yy_current_state = (int) yy_def[yy_current_state];
		if ( yy_current_state >= 60 )
			yy_c = yy_meta[(unsigned int) yy_c];
		}
	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
	yy_is_jam = (yy_current_state == 59);

	return yy_is_jam ? 0 : yy_current_state;
}

    static void yyunput (int c, register char * yy_bp )
{
	register char *yy_cp;
    
    yy_cp = (yy_c_buf_p);

	/* undo effects of setting up yytext */
	*yy_cp = (yy_hold_char);

	if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
		{ /* need to shift things up to make room */
		/* +2 for EOB chars. */
		register int number_to_move = (yy_n_chars) + 2;
		register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
					YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
		register char *source =
				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];

		while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
			*--dest = *--source;

		yy_cp += (int) (dest - source);
		yy_bp += (int) (dest - source);
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;

		if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
			YY_FATAL_ERROR( "flex scanner push-back overflow" );
		}

	*--yy_cp = (char) c;

	(yytext_ptr) = yy_bp;
	(yy_hold_char) = *yy_cp;
	(yy_c_buf_p) = yy_cp;
}

#ifndef YY_NO_INPUT
#ifdef __cplusplus
    static int yyinput (void)
#else
    static int input  (void)
#endif

{
	int c;
    
	*(yy_c_buf_p) = (yy_hold_char);

	if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
		{
		/* yy_c_buf_p now points to the character we want to return.
		 * If this occurs *before* the EOB characters, then it's a
		 * valid NUL; if not, then we've hit the end of the buffer.
		 */
		if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
			/* This was really a NUL. */
			*(yy_c_buf_p) = '\0';

		else
			{ /* need more input */
			int offset = (yy_c_buf_p) - (yytext_ptr);
			++(yy_c_buf_p);

			switch ( yy_get_next_buffer(  ) )
				{
				case EOB_ACT_LAST_MATCH:
					/* This happens because yy_g_n_b()
					 * sees that we've accumulated a
					 * token and flags that we need to
					 * try matching the token before
					 * proceeding.  But for input(),
					 * there's no matching to consider.
					 * So convert the EOB_ACT_LAST_MATCH
					 * to EOB_ACT_END_OF_FILE.
					 */

					/* Reset buffer status. */
					yyrestart(yyin );

					/*FALLTHROUGH*/

				case EOB_ACT_END_OF_FILE:
					{
					if ( yywrap( ) )
						return EOF;

					if ( ! (yy_did_buffer_switch_on_eof) )
						YY_NEW_FILE;
#ifdef __cplusplus
					return yyinput();
#else
					return input();
#endif
					}

				case EOB_ACT_CONTINUE_SCAN:
					(yy_c_buf_p) = (yytext_ptr) + offset;
					break;
				}
			}
		}

	c = *(unsigned char *) (yy_c_buf_p);	/* cast for 8-bit char's */
	*(yy_c_buf_p) = '\0';	/* preserve yytext */
	(yy_hold_char) = *++(yy_c_buf_p);

	return c;
}
#endif	/* ifndef YY_NO_INPUT */

/** Immediately switch to a different input stream.
 * @param input_file A readable stream.
 * 
 * @note This function does not reset the start condition to @c INITIAL .
 */
    void yyrestart  (FILE * input_file )
{
    
	if ( ! YY_CURRENT_BUFFER ){
        yyensure_buffer_stack ();
		YY_CURRENT_BUFFER_LVALUE =
            yy_create_buffer(yyin,YY_BUF_SIZE );
	}

	yy_init_buffer(YY_CURRENT_BUFFER,input_file );
	yy_load_buffer_state( );
}

/** Switch to a different input buffer.
 * @param new_buffer The new input buffer.
 * 
 */
    void yy_switch_to_buffer  (YY_BUFFER_STATE  new_buffer )
{
    
	/* TODO. We should be able to replace this entire function body
	 * with
	 *		yypop_buffer_state();
	 *		yypush_buffer_state(new_buffer);
     */
	yyensure_buffer_stack ();
	if ( YY_CURRENT_BUFFER == new_buffer )
		return;

	if ( YY_CURRENT_BUFFER )
		{
		/* Flush out information for old buffer. */
		*(yy_c_buf_p) = (yy_hold_char);
		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
		}

	YY_CURRENT_BUFFER_LVALUE = new_buffer;
	yy_load_buffer_state( );

	/* We don't actually know whether we did this switch during
	 * EOF (yywrap()) processing, but the only time this flag
	 * is looked at is after yywrap() is called, so it's safe
	 * to go ahead and always set it.
	 */
	(yy_did_buffer_switch_on_eof) = 1;
}

static void yy_load_buffer_state  (void)
{
    	(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
	(yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
	yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
	(yy_hold_char) = *(yy_c_buf_p);
}

/** Allocate and initialize an input buffer state.
 * @param file A readable stream.
 * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
 * 
 * @return the allocated buffer state.
 */
    YY_BUFFER_STATE yy_create_buffer  (FILE * file, int  size )
{
	YY_BUFFER_STATE b;
    
	b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
	if ( ! b )
		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );

	b->yy_buf_size = size;

	/* yy_ch_buf has to be 2 characters longer than the size given because
	 * we need to put in 2 end-of-buffer characters.
	 */
	b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2  );
	if ( ! b->yy_ch_buf )
		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );

	b->yy_is_our_buffer = 1;

	yy_init_buffer(b,file );

	return b;
}

/** Destroy the buffer.
 * @param b a buffer created with yy_create_buffer()
 * 
 */
    void yy_delete_buffer (YY_BUFFER_STATE  b )
{
    
	if ( ! b )
		return;

	if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
		YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;

	if ( b->yy_is_our_buffer )
		yyfree((void *) b->yy_ch_buf  );

	yyfree((void *) b  );
}

#ifndef __cplusplus
extern int isatty (int );
#endif /* __cplusplus */
    
/* Initializes or reinitializes a buffer.
 * This function is sometimes called more than once on the same buffer,
 * such as during a yyrestart() or at EOF.
 */
    static void yy_init_buffer  (YY_BUFFER_STATE  b, FILE * file )

{
	int oerrno = errno;
    
	yy_flush_buffer(b );

	b->yy_input_file = file;
	b->yy_fill_buffer = 1;

    /* If b is the current buffer, then yy_init_buffer was _probably_
     * called from yyrestart() or through yy_get_next_buffer.
     * In that case, we don't want to reset the lineno or column.
     */
    if (b != YY_CURRENT_BUFFER){
        b->yy_bs_lineno = 1;
        b->yy_bs_column = 0;
    }

        b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
    
	errno = oerrno;
}

/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
 * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
 * 
 */
    void yy_flush_buffer (YY_BUFFER_STATE  b )
{
    	if ( ! b )
		return;

	b->yy_n_chars = 0;

	/* We always need two end-of-buffer characters.  The first causes
	 * a transition to the end-of-buffer state.  The second causes
	 * a jam in that state.
	 */
	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;

	b->yy_buf_pos = &b->yy_ch_buf[0];

	b->yy_at_bol = 1;
	b->yy_buffer_status = YY_BUFFER_NEW;

	if ( b == YY_CURRENT_BUFFER )
		yy_load_buffer_state( );
}

/** Pushes the new state onto the stack. The new state becomes
 *  the current state. This function will allocate the stack
 *  if necessary.
 *  @param new_buffer The new state.
 *  
 */
void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
{
    	if (new_buffer == NULL)
		return;

	yyensure_buffer_stack();

	/* This block is copied from yy_switch_to_buffer. */
	if ( YY_CURRENT_BUFFER )
		{
		/* Flush out information for old buffer. */
		*(yy_c_buf_p) = (yy_hold_char);
		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
		}

	/* Only push if top exists. Otherwise, replace top. */
	if (YY_CURRENT_BUFFER)
		(yy_buffer_stack_top)++;
	YY_CURRENT_BUFFER_LVALUE = new_buffer;

	/* copied from yy_switch_to_buffer. */
	yy_load_buffer_state( );
	(yy_did_buffer_switch_on_eof) = 1;
}

/** Removes and deletes the top of the stack, if present.
 *  The next element becomes the new top.
 *  
 */
void yypop_buffer_state (void)
{
    	if (!YY_CURRENT_BUFFER)
		return;

	yy_delete_buffer(YY_CURRENT_BUFFER );
	YY_CURRENT_BUFFER_LVALUE = NULL;
	if ((yy_buffer_stack_top) > 0)
		--(yy_buffer_stack_top);

	if (YY_CURRENT_BUFFER) {
		yy_load_buffer_state( );
		(yy_did_buffer_switch_on_eof) = 1;
	}
}

/* Allocates the stack if it does not exist.
 *  Guarantees space for at least one push.
 */
static void yyensure_buffer_stack (void)
{
	int num_to_alloc;
    
	if (!(yy_buffer_stack)) {

		/* First allocation is just for 2 elements, since we don't know if this
		 * scanner will even need a stack. We use 2 instead of 1 to avoid an
		 * immediate realloc on the next call.
         */
		num_to_alloc = 1;
		(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
								(num_to_alloc * sizeof(struct yy_buffer_state*)
								);
		if ( ! (yy_buffer_stack) )
			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
								  
		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
				
		(yy_buffer_stack_max) = num_to_alloc;
		(yy_buffer_stack_top) = 0;
		return;
	}

	if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){

		/* Increase the buffer to prepare for a possible push. */
		int grow_size = 8 /* arbitrary grow size */;

		num_to_alloc = (yy_buffer_stack_max) + grow_size;
		(yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
								((yy_buffer_stack),
								num_to_alloc * sizeof(struct yy_buffer_state*)
								);
		if ( ! (yy_buffer_stack) )
			YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );

		/* zero only the new slots.*/
		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
		(yy_buffer_stack_max) = num_to_alloc;
	}
}

/** Setup the input buffer state to scan directly from a user-specified character buffer.
 * @param base the character buffer
 * @param size the size in bytes of the character buffer
 * 
 * @return the newly allocated buffer state object. 
 */
YY_BUFFER_STATE yy_scan_buffer  (char * base, yy_size_t  size )
{
	YY_BUFFER_STATE b;
    
	if ( size < 2 ||
	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
	     base[size-1] != YY_END_OF_BUFFER_CHAR )
		/* They forgot to leave room for the EOB's. */
		return 0;

	b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state )  );
	if ( ! b )
		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );

	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
	b->yy_buf_pos = b->yy_ch_buf = base;
	b->yy_is_our_buffer = 0;
	b->yy_input_file = 0;
	b->yy_n_chars = b->yy_buf_size;
	b->yy_is_interactive = 0;
	b->yy_at_bol = 1;
	b->yy_fill_buffer = 0;
	b->yy_buffer_status = YY_BUFFER_NEW;

	yy_switch_to_buffer(b  );

	return b;
}

/** Setup the input buffer state to scan a string. The next call to yylex() will
 * scan from a @e copy of @a str.
 * @param yystr a NUL-terminated string to scan
 * 
 * @return the newly allocated buffer state object.
 * @note If you want to scan bytes that may contain NUL values, then use
 *       yy_scan_bytes() instead.
 */
YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
{
    
	return yy_scan_bytes(yystr,strlen(yystr) );
}

/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
 * scan from a @e copy of @a bytes.
 * @param yybytes the byte buffer to scan
 * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
 * 
 * @return the newly allocated buffer state object.
 */
YY_BUFFER_STATE yy_scan_bytes  (yyconst char * yybytes, int  _yybytes_len )
{
	YY_BUFFER_STATE b;
	char *buf;
	yy_size_t n;
	int i;
    
	/* Get memory for full buffer, including space for trailing EOB's. */
	n = _yybytes_len + 2;
	buf = (char *) yyalloc(n  );
	if ( ! buf )
		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );

	for ( i = 0; i < _yybytes_len; ++i )
		buf[i] = yybytes[i];

	buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;

	b = yy_scan_buffer(buf,n );
	if ( ! b )
		YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );

	/* It's okay to grow etc. this buffer, and we should throw it
	 * away when we're done.
	 */
	b->yy_is_our_buffer = 1;

	return b;
}

#ifndef YY_EXIT_FAILURE
#define YY_EXIT_FAILURE 2
#endif

static void yy_fatal_error (yyconst char* msg )
{
    	(void) fprintf( stderr, "%s\n", msg );
	exit( YY_EXIT_FAILURE );
}

/* Redefine yyless() so it works in section 3 code. */

#undef yyless
#define yyless(n) \
	do \
		{ \
		/* Undo effects of setting up yytext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
		yytext[yyleng] = (yy_hold_char); \
		(yy_c_buf_p) = yytext + yyless_macro_arg; \
		(yy_hold_char) = *(yy_c_buf_p); \
		*(yy_c_buf_p) = '\0'; \
		yyleng = yyless_macro_arg; \
		} \
	while ( 0 )

/* Accessor  methods (get/set functions) to struct members. */

/** Get the current line number.
 * 
 */
int yyget_lineno  (void)
{
        
    return yylineno;
}

/** Get the input stream.
 * 
 */
FILE *yyget_in  (void)
{
        return yyin;
}

/** Get the output stream.
 * 
 */
FILE *yyget_out  (void)
{
        return yyout;
}

/** Get the length of the current token.
 * 
 */
int yyget_leng  (void)
{
        return yyleng;
}

/** Get the current token.
 * 
 */

char *yyget_text  (void)
{
        return yytext;
}

/** Set the current line number.
 * @param line_number
 * 
 */
void yyset_lineno (int  line_number )
{
    
    yylineno = line_number;
}

/** Set the input stream. This does not discard the current
 * input buffer.
 * @param in_str A readable stream.
 * 
 * @see yy_switch_to_buffer
 */
void yyset_in (FILE *  in_str )
{
        yyin = in_str ;
}

void yyset_out (FILE *  out_str )
{
        yyout = out_str ;
}

int yyget_debug  (void)
{
        return yy_flex_debug;
}

void yyset_debug (int  bdebug )
{
        yy_flex_debug = bdebug ;
}

static int yy_init_globals (void)
{
        /* Initialization is the same as for the non-reentrant scanner.
     * This function is called from yylex_destroy(), so don't allocate here.
     */

    (yy_buffer_stack) = 0;
    (yy_buffer_stack_top) = 0;
    (yy_buffer_stack_max) = 0;
    (yy_c_buf_p) = (char *) 0;
    (yy_init) = 0;
    (yy_start) = 0;

/* Defined in main.c */
#ifdef YY_STDINIT
    yyin = stdin;
    yyout = stdout;
#else
    yyin = (FILE *) 0;
    yyout = (FILE *) 0;
#endif

    /* For future reference: Set errno on error, since we are called by
     * yylex_init()
     */
    return 0;
}

/* yylex_destroy is for both reentrant and non-reentrant scanners. */
int yylex_destroy  (void)
{
    
    /* Pop the buffer stack, destroying each element. */
	while(YY_CURRENT_BUFFER){
		yy_delete_buffer(YY_CURRENT_BUFFER  );
		YY_CURRENT_BUFFER_LVALUE = NULL;
		yypop_buffer_state();
	}

	/* Destroy the stack itself. */
	yyfree((yy_buffer_stack) );
	(yy_buffer_stack) = NULL;

    /* Reset the globals. This is important in a non-reentrant scanner so the next time
     * yylex() is called, initialization will occur. */
    yy_init_globals( );

    return 0;
}

/*
 * Internal utility routines.
 */

#ifndef yytext_ptr
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
{
	register int i;
	for ( i = 0; i < n; ++i )
		s1[i] = s2[i];
}
#endif

#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * s )
{
	register int n;
	for ( n = 0; s[n]; ++n )
		;

	return n;
}
#endif

void *yyalloc (yy_size_t  size )
{
	return (void *) malloc( size );
}

void *yyrealloc  (void * ptr, yy_size_t  size )
{
	/* The cast to (char *) in the following accommodates both
	 * implementations that use char* generic pointers, and those
	 * that use void* generic pointers.  It works with the latter
	 * because both ANSI C and C++ allow castless assignment from
	 * any pointer type to void*, and deal with argument conversions
	 * as though doing an assignment.
	 */
	return (void *) realloc( (char *) ptr, size );
}

void yyfree (void * ptr )
{
	free( (char *) ptr );	/* see yyrealloc() for (char *) cast */
}

#define YYTABLES_NAME "yytables"

#line 44 "hcl.lex"




sim/misc/yas-grammar.c0000600005644400000240000015031211171132214013455 0ustar  tmsgrad/* A lexical scanner generated by flex */

/* Scanner skeleton version:
 * $Header: /home/daffy/u0/vern/flex/RCS/flex.skl,v 2.91 96/09/10 16:58:48 vern Exp $
 */

#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5

#include <stdio.h>
#include <unistd.h>


/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
#ifdef c_plusplus
#ifndef __cplusplus
#define __cplusplus
#endif
#endif


#ifdef __cplusplus

#include <stdlib.h>

/* Use prototypes in function declarations. */
#define YY_USE_PROTOS

/* The "const" storage-class-modifier is valid. */
#define YY_USE_CONST

#else	/* ! __cplusplus */

#if __STDC__

#define YY_USE_PROTOS
#define YY_USE_CONST

#endif	/* __STDC__ */
#endif	/* ! __cplusplus */

#ifdef __TURBOC__
 #pragma warn -rch
 #pragma warn -use
#include <io.h>
#include <stdlib.h>
#define YY_USE_CONST
#define YY_USE_PROTOS
#endif

#ifdef YY_USE_CONST
#define yyconst const
#else
#define yyconst
#endif


#ifdef YY_USE_PROTOS
#define YY_PROTO(proto) proto
#else
#define YY_PROTO(proto) ()
#endif

/* Returned upon end-of-file. */
#define YY_NULL 0

/* Promotes a possibly negative, possibly signed char to an unsigned
 * integer for use as an array index.  If the signed char is negative,
 * we want to instead treat it as an 8-bit unsigned char, hence the
 * double cast.
 */
#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)

/* Enter a start condition.  This macro really ought to take a parameter,
 * but we do it the disgusting crufty way forced on us by the ()-less
 * definition of BEGIN.
 */
#define BEGIN yy_start = 1 + 2 *

/* Translate the current start state into a value that can be later handed
 * to BEGIN to return to the state.  The YYSTATE alias is for lex
 * compatibility.
 */
#define YY_START ((yy_start - 1) / 2)
#define YYSTATE YY_START

/* Action number for EOF rule of a given start state. */
#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)

/* Special action meaning "start processing a new file". */
#define YY_NEW_FILE yyrestart( yyin )

#define YY_END_OF_BUFFER_CHAR 0

/* Size of default input buffer. */
#define YY_BUF_SIZE 16384

typedef struct yy_buffer_state *YY_BUFFER_STATE;

extern int yyleng;
extern FILE *yyin, *yyout;

#define EOB_ACT_CONTINUE_SCAN 0
#define EOB_ACT_END_OF_FILE 1
#define EOB_ACT_LAST_MATCH 2

/* The funky do-while in the following #define is used to turn the definition
 * int a single C statement (which needs a semi-colon terminator).  This
 * avoids problems with code like:
 *
 * 	if ( condition_holds )
 *		yyless( 5 );
 *	else
 *		do_something_else();
 *
 * Prior to using the do-while the compiler would get upset at the
 * "else" because it interpreted the "if" statement as being all
 * done when it reached the ';' after the yyless() call.
 */

/* Return all but the first 'n' matched characters back to the input stream. */

#define yyless(n) \
	do \
		{ \
		/* Undo effects of setting up yytext. */ \
		*yy_cp = yy_hold_char; \
		YY_RESTORE_YY_MORE_OFFSET \
		yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
		YY_DO_BEFORE_ACTION; /* set up yytext again */ \
		} \
	while ( 0 )

#define unput(c) yyunput( c, yytext_ptr )

/* The following is because we cannot portably get our hands on size_t
 * (without autoconf's help, which isn't available because we want
 * flex-generated scanners to compile on their own).
 */
typedef unsigned int yy_size_t;


struct yy_buffer_state
	{
	FILE *yy_input_file;

	char *yy_ch_buf;		/* input buffer */
	char *yy_buf_pos;		/* current position in input buffer */

	/* Size of input buffer in bytes, not including room for EOB
	 * characters.
	 */
	yy_size_t yy_buf_size;

	/* Number of characters read into yy_ch_buf, not including EOB
	 * characters.
	 */
	int yy_n_chars;

	/* Whether we "own" the buffer - i.e., we know we created it,
	 * and can realloc() it to grow it, and should free() it to
	 * delete it.
	 */
	int yy_is_our_buffer;

	/* Whether this is an "interactive" input source; if so, and
	 * if we're using stdio for input, then we want to use getc()
	 * instead of fread(), to make sure we stop fetching input after
	 * each newline.
	 */
	int yy_is_interactive;

	/* Whether we're considered to be at the beginning of a line.
	 * If so, '^' rules will be active on the next match, otherwise
	 * not.
	 */
	int yy_at_bol;

	/* Whether to try to fill the input buffer when we reach the
	 * end of it.
	 */
	int yy_fill_buffer;

	int yy_buffer_status;
#define YY_BUFFER_NEW 0
#define YY_BUFFER_NORMAL 1
	/* When an EOF's been seen but there's still some text to process
	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
	 * shouldn't try reading from the input source any more.  We might
	 * still have a bunch of tokens to match, though, because of
	 * possible backing-up.
	 *
	 * When we actually see the EOF, we change the status to "new"
	 * (via yyrestart()), so that the user can continue scanning by
	 * just pointing yyin at a new input file.
	 */
#define YY_BUFFER_EOF_PENDING 2
	};

static YY_BUFFER_STATE yy_current_buffer = 0;

/* We provide macros for accessing buffer states in case in the
 * future we want to put the buffer states in a more general
 * "scanner state".
 */
#define YY_CURRENT_BUFFER yy_current_buffer


/* yy_hold_char holds the character lost when yytext is formed. */
static char yy_hold_char;

static int yy_n_chars;		/* number of characters read into yy_ch_buf */


int yyleng;

/* Points to current character in buffer. */
static char *yy_c_buf_p = (char *) 0;
static int yy_init = 1;		/* whether we need to initialize */
static int yy_start = 0;	/* start state number */

/* Flag which is used to allow yywrap()'s to do buffer switches
 * instead of setting up a fresh yyin.  A bit of a hack ...
 */
static int yy_did_buffer_switch_on_eof;

void yyrestart YY_PROTO(( FILE *input_file ));

void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
void yy_load_buffer_state YY_PROTO(( void ));
YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )

YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));

static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
static void yy_flex_free YY_PROTO(( void * ));

#define yy_new_buffer yy_create_buffer

#define yy_set_interactive(is_interactive) \
	{ \
	if ( ! yy_current_buffer ) \
		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
	yy_current_buffer->yy_is_interactive = is_interactive; \
	}

#define yy_set_bol(at_bol) \
	{ \
	if ( ! yy_current_buffer ) \
		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
	yy_current_buffer->yy_at_bol = at_bol; \
	}

#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)


#define YY_USES_REJECT
typedef unsigned char YY_CHAR;
FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
typedef int yy_state_type;
extern char *yytext;
#define yytext_ptr yytext

static yy_state_type yy_get_previous_state YY_PROTO(( void ));
static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
static int yy_get_next_buffer YY_PROTO(( void ));
static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));

/* Done after the current pattern has been matched and before the
 * corresponding action - sets up yytext.
 */
#define YY_DO_BEFORE_ACTION \
	yytext_ptr = yy_bp; \
	yyleng = (int) (yy_cp - yy_bp); \
	yy_hold_char = *yy_cp; \
	*yy_cp = '\0'; \
	yy_c_buf_p = yy_cp;

#define YY_NUM_RULES 16
#define YY_END_OF_BUFFER 17
static yyconst short int yy_acclist[303] =
    {   0,
       17,   14,   16,    6,   14,   16,    5,   16,    5,   16,
       14,   16,    7,   14,   16,   14,   16,   12,   14,   16,
       14,   16,   14,   16,   14,   16,   10,   14,   16,   10,
       14,   16,   13,   14,   16,   13,   14,   16,   13,   14,
       16,   13,   14,   16,   13,   14,   16,   13,   14,   16,
       13,   14,   16,   13,   14,   16,   13,   14,   16,   13,
       14,   16,   13,   14,   16,   13,   14,   16,   13,   14,
       16,   14,   16,    6,   14,   16,    1,    5,   16,    1,
        5,   16,   14,   16,    7,   14,   16,   14,   16,   12,
       14,   16,   14,   16,   14,   16,   14,   16,   10,   14,

       16,   10,   14,   16,   13,   14,   16,   13,   14,   16,
       13,   14,   16,   13,   14,   16,   13,   14,   16,   13,
       14,   16,   13,   14,   16,   13,   14,   16,   13,   14,
       16,   13,   14,   16,   13,   14,   16,   13,   14,   16,
       13,   14,   16,   16,   15,   16,   16,    6,    5,    5,
        2,    2,    7,   10,   13,   13,   13,   13,   13,   13,
       13,   13,    8,   13,    8,   13,    8,   13,   13,   13,
       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
        1,    1,    6,    1,    5,    1,    5,    1,    2,    1,
        2,    7,   10,   13,   13,   13,   13,   13,   13,   13,

       13,    8,   13,    8,   13,    8,   13,   13,   13,   13,
       13,   13,   13,   13,   13,   13,   13,   13,   13,   15,
        4,    4,    3,    3,   11,   13,   13,   13,   13,   13,
       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
        1,    4,    1,    4,    1,    3,    1,    3,   11,   13,
       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
       13,   13,   13,   13,    9,    8,   13,   13,   13,   13,
       13,   13,   13,   13,    9,    8,   13,   13,   13,   13,
       13,   13,   13,   13,    8,   13,    8,   13,   13,   13,
       13,   13,   13,    8,   13,    8,   13,   13,   13,   13,

       13,   13
    } ;

static yyconst short int yy_accept[258] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    2,    4,    7,
        9,   11,   13,   16,   18,   21,   23,   25,   27,   30,
       33,   36,   39,   42,   45,   48,   51,   54,   57,   60,
       63,   66,   69,   72,   74,   77,   80,   83,   85,   88,
       90,   93,   95,   97,   99,  102,  105,  108,  111,  114,
      117,  120,  123,  126,  129,  132,  135,  138,  141,  144,
      145,  147,  148,  149,  150,  151,  151,  152,  153,  154,
      154,  155,  155,  155,  155,  155,  155,  155,  155,  155,
      156,  157,  158,  159,  160,  161,  162,  163,  165,  167,
      169,  170,  171,  172,  173,  174,  175,  176,  177,  178,

      179,  180,  181,  181,  182,  183,  184,  186,  188,  188,
      190,  192,  193,  193,  194,  194,  194,  194,  194,  194,
      194,  194,  194,  195,  196,  197,  198,  199,  200,  201,
      202,  204,  206,  208,  209,  210,  211,  212,  213,  214,
      215,  216,  217,  218,  219,  220,  220,  221,  221,  221,
      221,  221,  221,  221,  221,  221,  221,  221,  221,  222,
      223,  223,  224,  225,  226,  227,  228,  229,  230,  231,
      232,  233,  234,  235,  236,  237,  238,  239,  240,  241,
      241,  241,  241,  241,  241,  241,  241,  241,  241,  241,
      241,  243,  245,  245,  247,  249,  250,  251,  252,  253,

      254,  255,  256,  257,  258,  259,  260,  261,  262,  263,
      264,  265,  266,  266,  266,  266,  267,  267,  268,  269,
      270,  271,  272,  273,  274,  275,  276,  276,  276,  276,
      277,  277,  278,  279,  280,  281,  282,  283,  284,  285,
      285,  287,  289,  290,  291,  292,  293,  294,  294,  296,
      298,  299,  300,  301,  302,  303,  303
    } ;

static yyconst int yy_ec[256] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
        1,    1,    4,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    2,    1,    1,    5,    6,    7,    1,    1,    8,
        8,    9,    1,    8,   10,   11,   12,   13,   14,   14,
       14,   14,   14,   14,   14,   14,   14,    8,    1,    1,
        1,    1,    1,    1,   15,   15,   15,   15,   15,   15,
       16,   16,   16,   16,   16,   16,   16,   16,   16,   16,
       16,   16,   16,   16,   16,   16,   16,   17,   16,   16,
        1,    1,    1,    1,   18,    1,   19,   20,   21,   22,

       23,   15,   24,   25,   26,   27,   16,   28,   29,   30,
       31,   32,   16,   33,   34,   35,   36,   37,   38,   39,
       40,   16,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,

        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1
    } ;

static yyconst int yy_meta[41] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    2,    2,    2,    3,    3,    3,    2,    2,
        2,    2,    2,    3,    3,    3,    3,    3,    3,    3,
        3,    3,    3,    3,    3,    3,    3,    3,    3,    3
    } ;

static yyconst short int yy_base[270] =
    {   0,
        0,   40,   78,   80,    0,    0,  657,  658,   83,  658,
       85,   87,  650,  632,  658,   79,   75,   87,   84,   91,
        0,   78,   83,  635,   87,   86,  630,  619,  620,   86,
       95,  614,  618,  122,  127,  658,  129,  131,  133,  137,
      139,  141,  158,  144,  154,  160,  196,  208,  150,  162,
      202,  217,  129,  116,  203,  206,  221,  153,  226,  162,
      658,  658,  256,  658,  184,  191,  658,  219,  642,  242,
      213,  619,  606,  614,  613,  612,  249,  262,    0,    0,
      620,  619,  612,  608,  610,  615,  607,    0,  612,  611,
      601,  609,  612,  601,  597,  596,  593,  591,  596,  559,

      566,  552,  264,  658,  266,  269,  658,  271,  274,  658,
      276,  278,  282,  284,  286,  288,  290,  292,  296,  302,
      304,  326,   89,  287,  288,  303,  289,  304,  313,  322,
      320,  331,  333,  335,  336,  349,  340,  342,  351,  354,
      355,  364,  367,  378,  369,  309,  658,  545,  283,  544,
      298,   95,  547,  534,  530,  521,  519,  400,  658,  402,
      406,  658,  408,    0,  521,  503,  502,  468,  458,  457,
      446,  420,  423,  422,  422,  414,  412,  413,  379,  410,
      412,  414,  416,  420,  422,  424,  426,  428,  430,  418,
      658,  432,  434,  658,  436,    0,  436,  439,  443,  438,

      448,  365,  450,  452,  454,  464,  465,  466,  469,  476,
      479,  658,  377,  369,  358,  658,  358,  487,  350,  338,
      337,  301,  308,  246,  218,  499,  509,  515,  517,  519,
      521,  504,  486,  507,  517,  520,  523,  524,  526,  219,
      208,  206,  168,  157,  154,  148,  142,  532,  536,  542,
      545,  548,  549,  552,  559,  658,  589,  592,  595,  597,
      600,  603,  606,  609,  612,  615,  148,  618,  621
    } ;

static yyconst short int yy_def[270] =
    {   0,
      256,  256,  257,  257,  258,  258,  256,  256,  256,  256,
      256,  259,  256,  256,  256,  256,  256,  256,  256,  256,
      260,  260,  260,  260,  260,  260,  260,  260,  260,  260,
      260,  260,  260,  261,  261,  256,  256,  262,  261,  261,
      261,  261,  261,  261,  261,  261,  263,  263,   48,   48,
       48,   48,   48,   48,   48,   48,   48,   48,   48,  264,
      256,  256,  256,  256,  256,  259,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  265,  266,  267,  260,
      260,  260,  260,  260,  260,  260,  260,  260,  260,  260,
      260,  260,  260,  260,  260,  260,  260,  260,  260,  260,

      260,  260,  261,  256,  256,  261,  256,  256,  262,  256,
      256,  261,  261,  261,  261,  261,  261,  261,  261,  268,
      269,  261,   48,   48,   48,   48,   48,   48,   48,   48,
       48,   48,   48,   48,   48,   48,   48,   48,   48,   48,
       48,   48,   48,   48,   48,  264,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  265,  256,  256,
      266,  256,  256,  267,  260,  260,  260,  260,  260,  260,
      260,  260,  260,  260,  260,  260,  260,  260,  260,  261,
      261,  261,  261,  261,  261,  261,  261,  261,  261,  268,
      256,  256,  269,  256,  256,  122,   48,   48,   48,   48,

       48,   48,   48,   48,   48,   48,   48,   48,   48,   48,
       48,  256,  256,  256,  256,  256,  256,  260,  260,  260,
      260,  260,  260,  260,  260,  261,  261,  261,  261,  261,
      261,   48,   48,   48,   48,   48,   48,   48,   48,  256,
      260,  260,  260,  260,  260,  260,  260,  261,   48,   48,
       48,   48,   48,   48,   48,    0,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256,  256
    } ;

static yyconst short int yy_nxt[699] =
    {   0,
        8,    9,   10,   11,   12,   13,   14,   15,    8,   16,
       17,   18,   19,   20,   21,   21,   21,    8,   22,   21,
       23,   21,   21,   21,   24,   25,   26,   27,   28,   29,
       21,   30,   31,   32,   21,   21,   21,   21,   33,   21,
       34,   35,   36,   37,   38,   39,   40,   41,   34,   42,
       43,   44,   45,   46,   47,   47,   47,   34,   48,   47,
       49,   47,   47,   47,   50,   51,   52,   53,   54,   55,
       47,   56,   57,   58,   47,   47,   47,   47,   59,   47,
       61,   61,   61,   61,   63,   64,   65,   64,   65,   67,
       68,   71,   71,   72,   73,   77,   71,   71,   78,   81,

       79,   83,   74,   71,   71,   86,   75,   82,   88,   89,
      123,   84,   76,   90,   91,   92,   96,   98,  123,   87,
      212,   97,   79,   99,  104,  105,  212,  100,  106,  107,
      108,  107,  108,  110,  111,  104,  105,  123,  112,  104,
      105,  104,  105,  104,  105,  123,  104,  105,  137,  164,
      123,  136,  120,  114,  114,  121,  104,  105,  123,  113,
      104,  105,  104,  105,  147,  147,  114,  114,  126,   88,
      122,  123,  114,  114,  123,   88,  115,  116,  127,  123,
      128,   88,  123,  123,   88,  117,   64,   65,  144,  118,
       88,  123,  122,   67,   68,  119,  103,  103,  104,  105,

      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
      104,  105,  103,  103,  103,  103,  103,  103,  103,  103,
      129,   67,   68,  123,  123,   71,   71,  123,   88,  124,
       88,  123,  123,  138,  130,  123,  139,  125,  123,  131,
      132,  140,  123,  141,  133,  134,  135,  123,  216,  142,
      123,  159,  160,  143,  247,  123,  145,   63,   64,   65,
      148,  149,  150,  151,  162,  163,  104,  105,  104,  105,
      106,  107,  108,  107,  108,  152,  110,  111,  110,  111,
      104,  105,  246,  112,  104,  105,  104,  105,  104,  105,
      104,  105,  104,  105,  104,  105,  114,  114,  104,  105,

      180,  181,  182,  183,  191,  192,  194,  195,  197,  198,
      123,  147,  147,  185,  212,  184,  123,  123,  123,  200,
      187,  212,  188,  212,  123,  123,  189,  186,  104,  105,
      199,  201,  123,  123,  202,   88,  212,  245,  196,  196,
      196,  123,  123,  123,  196,  196,  196,  196,  196,  123,
      203,  123,  123,  131,  123,  131,  123,  123,  131,   88,
      123,  123,  123,  123,  123,  123,  131,  204,  205,  123,
      123,  123,  123,  131,  244,  123,  123,   88,  123,  216,
      123,  216,  206,  123,  123,  123,  233,  207,  123,  131,
      123,  216,  208,  123,  123,  209,  123,  210,  123,  123,

      240,  211,  159,  160,  159,  160,   88,  123,  162,  163,
      162,  163,  104,  105,  104,  105,  104,  105,  104,  105,
      191,  192,  104,  105,  104,  105,  104,  105,  104,  105,
      104,  105,  104,  105,  191,  192,  194,  195,  194,  195,
       88,  226,  225,  226,  224,  226,  223,  227,  226,   88,
      226,  226,  226,  222,  226,  229,  221,  123,  228,  123,
      123,  230,  231,  131,  123,  123,  131,  123,  123,  123,
      131,  123,  123,  123,  232,  123,  220,  123,  219,  123,
      234,  123,  131,  123,  236,  123,  123,  123,  235,  237,
      123,  131,   88,  123,  123,  123,  238,  123,  123,  239,

      123,  104,  105,  131,  218,  123,  131,  123,  123,   88,
      241,  104,  105,  131,  242,  123,  243,  104,  105,  104,
      105,  104,  105,  104,  105,  123,  131,  249,  123,   88,
       88,  250,  248,  251,  104,  105,  123,  230,  123,  131,
      230,  123,  230,  252,  123,  123,  123,  123,   88,  123,
      131,  217,  123,  123,  216,  123,  253,  123,  131,  215,
      254,  230,  255,  123,  131,  123,  123,  131,  214,  123,
      123,  123,  213,  123,  123,  131,  131,  123,  123,  131,
      123,  123,  212,  212,  179,  178,  131,  177,  123,   60,
       60,   60,   62,   62,   62,   66,   66,   66,   80,   80,

      103,  103,  103,  109,  109,  109,  123,  123,  123,  146,
      146,  146,  158,  158,  158,  161,  161,  161,  190,  190,
      190,  193,  193,  193,  176,   88,  175,  174,   88,  173,
      172,   88,   88,   88,   88,  171,  170,  169,  168,  167,
      166,  165,  157,  156,  155,  154,  153,   69,  102,  101,
       95,   94,   93,   85,   70,   69,  256,    7,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256

    } ;

static yyconst short int yy_chk[699] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
        3,    3,    4,    4,    9,    9,    9,   11,   11,   12,
       12,   16,   16,   17,   17,   18,   19,   19,   18,   22,

       19,   23,   17,   20,   20,   25,   17,   22,   26,   26,
      123,   23,   17,   26,   26,   26,   30,   31,  123,   25,
      152,   30,   19,   31,   34,   34,  152,   31,   35,   35,
       35,   37,   37,   38,   38,   39,   39,   54,   39,   40,
       40,   41,   41,   42,   42,   54,   44,   44,   54,  267,
       53,   53,   44,   42,   42,   44,   45,   45,   53,   40,
       43,   43,   46,   46,   60,   60,   45,   45,   49,  247,
       45,   49,   46,   46,   58,  246,   43,   43,   49,   49,
       50,  245,   58,   50,  244,   43,   65,   65,   58,   43,
      243,   50,   45,   66,   66,   43,   47,   47,   47,   47,

       47,   47,   47,   47,   47,   47,   47,   47,   48,   48,
       48,   48,   48,   48,   48,   48,   48,   48,   48,   48,
       51,   68,   68,   51,   55,   71,   71,   56,  242,   48,
      241,   51,   55,   55,   51,   56,   56,   48,   52,   52,
       52,   56,   57,   57,   52,   52,   52,   59,  240,   57,
       57,   77,   77,   57,  225,   59,   59,   63,   63,   63,
       70,   70,   70,   70,   78,   78,  103,  103,  105,  105,
      106,  106,  106,  108,  108,   70,  109,  109,  111,  111,
      112,  112,  224,  112,  113,  113,  114,  114,  115,  115,
      116,  116,  117,  117,  118,  118,  114,  114,  119,  119,

      113,  113,  113,  113,  120,  120,  121,  121,  124,  125,
      127,  146,  146,  115,  149,  113,  124,  125,  127,  127,
      117,  149,  118,  151,  126,  128,  119,  116,  122,  122,
      126,  128,  126,  128,  129,  223,  151,  222,  122,  122,
      122,  131,  129,  130,  122,  122,  122,  122,  122,  131,
      130,  130,  132,  132,  133,  133,  134,  135,  135,  221,
      132,  137,  133,  138,  134,  135,  134,  136,  137,  137,
      136,  138,  139,  138,  220,  140,  141,  219,  136,  217,
      139,  215,  139,  140,  141,  142,  202,  140,  143,  141,
      145,  214,  142,  142,  202,  143,  143,  144,  145,  144,

      213,  145,  158,  158,  160,  160,  179,  144,  161,  161,
      163,  163,  180,  180,  181,  181,  182,  182,  183,  183,
      190,  190,  184,  184,  185,  185,  186,  186,  187,  187,
      188,  188,  189,  189,  192,  192,  193,  193,  195,  195,
      178,  183,  177,  181,  176,  184,  175,  185,  180,  174,
      181,  184,  182,  173,  183,  187,  172,  197,  186,  200,
      198,  188,  189,  197,  199,  197,  198,  200,  198,  201,
      199,  203,  199,  204,  200,  205,  171,  201,  170,  203,
      203,  204,  201,  205,  205,  206,  207,  208,  204,  207,
      209,  206,  169,  206,  207,  208,  208,  210,  209,  209,

      211,  226,  226,  210,  168,  210,  211,  233,  211,  218,
      218,  227,  227,  233,  218,  233,  218,  228,  228,  229,
      229,  230,  230,  231,  231,  232,  232,  232,  234,  167,
      166,  232,  227,  232,  248,  248,  234,  228,  235,  235,
      229,  236,  231,  234,  237,  238,  235,  239,  165,  236,
      237,  157,  237,  238,  156,  239,  236,  249,  249,  155,
      238,  248,  239,  250,  250,  249,  251,  251,  154,  252,
      253,  250,  153,  254,  251,  252,  253,  252,  253,  254,
      255,  254,  150,  148,  102,  101,  255,  100,  255,  257,
      257,  257,  258,  258,  258,  259,  259,  259,  260,  260,

      261,  261,  261,  262,  262,  262,  263,  263,  263,  264,
      264,  264,  265,  265,  265,  266,  266,  266,  268,  268,
      268,  269,  269,  269,   99,   98,   97,   96,   95,   94,
       93,   92,   91,   90,   89,   87,   86,   85,   84,   83,
       82,   81,   76,   75,   74,   73,   72,   69,   33,   32,
       29,   28,   27,   24,   14,   13,    7,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256,  256,  256,
      256,  256,  256,  256,  256,  256,  256,  256

    } ;

static yy_state_type yy_state_buf[YY_BUF_SIZE + 2], *yy_state_ptr;
static char *yy_full_match;
static int yy_lp;
#define REJECT \
{ \
*yy_cp = yy_hold_char; /* undo effects of setting up yytext */ \
yy_cp = yy_full_match; /* restore poss. backed-over text */ \
++yy_lp; \
goto find_rule; \
}
#define yymore() yymore_used_but_not_detected
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
char *yytext;
#line 1 "yas-grammar.lex"
#define INITIAL 0
/* Grammar for Y86 Assembler */
#include "yas.h"
unsigned int atoh(const char *);
#define ERR 1
#define COM 2

#line 650 "lex.yy.c"

/* Macros after this point can all be overridden by user definitions in
 * section 1.
 */

#ifndef YY_SKIP_YYWRAP
#ifdef __cplusplus
extern "C" int yywrap YY_PROTO(( void ));
#else
extern int yywrap YY_PROTO(( void ));
#endif
#endif

#ifndef YY_NO_UNPUT
static void yyunput YY_PROTO(( int c, char *buf_ptr ));
#endif

#ifndef yytext_ptr
static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
#endif

#ifdef YY_NEED_STRLEN
static int yy_flex_strlen YY_PROTO(( yyconst char * ));
#endif

#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput YY_PROTO(( void ));
#else
static int input YY_PROTO(( void ));
#endif
#endif

#if YY_STACK_USED
static int yy_start_stack_ptr = 0;
static int yy_start_stack_depth = 0;
static int *yy_start_stack = 0;
#ifndef YY_NO_PUSH_STATE
static void yy_push_state YY_PROTO(( int new_state ));
#endif
#ifndef YY_NO_POP_STATE
static void yy_pop_state YY_PROTO(( void ));
#endif
#ifndef YY_NO_TOP_STATE
static int yy_top_state YY_PROTO(( void ));
#endif

#else
#define YY_NO_PUSH_STATE 1
#define YY_NO_POP_STATE 1
#define YY_NO_TOP_STATE 1
#endif

#ifdef YY_MALLOC_DECL
YY_MALLOC_DECL
#else
#if __STDC__
#ifndef __cplusplus
#include <stdlib.h>
#endif
#else
/* Just try to get by without declaring the routines.  This will fail
 * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
 * or sizeof(void*) != sizeof(int).
 */
#endif
#endif

/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#define YY_READ_BUF_SIZE 8192
#endif

/* Copy whatever the last rule matched to the standard output. */

#ifndef ECHO
/* This used to be an fputs(), but since the string might contain NUL's,
 * we now use fwrite().
 */
#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
#endif

/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
 * is returned in "result".
 */
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
	if ( yy_current_buffer->yy_is_interactive ) \
		{ \
		int c = '*', n; \
		for ( n = 0; n < max_size && \
			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
			buf[n] = (char) c; \
		if ( c == '\n' ) \
			buf[n++] = (char) c; \
		if ( c == EOF && ferror( yyin ) ) \
			YY_FATAL_ERROR( "input in flex scanner failed" ); \
		result = n; \
		} \
	else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
		  && ferror( yyin ) ) \
		YY_FATAL_ERROR( "input in flex scanner failed" );
#endif

/* No semi-colon after return; correct usage is to write "yyterminate();" -
 * we don't want an extra ';' after the "return" because that will cause
 * some compilers to complain about unreachable statements.
 */
#ifndef yyterminate
#define yyterminate() return YY_NULL
#endif

/* Number of entries by which start-condition stack grows. */
#ifndef YY_START_STACK_INCR
#define YY_START_STACK_INCR 25
#endif

/* Report a fatal error. */
#ifndef YY_FATAL_ERROR
#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
#endif

/* Default declaration of generated scanner - a define so the user can
 * easily add parameters.
 */
#ifndef YY_DECL
#define YY_DECL int yylex YY_PROTO(( void ))
#endif

/* Code executed at the beginning of each rule, after yytext and yyleng
 * have been set up.
 */
#ifndef YY_USER_ACTION
#define YY_USER_ACTION
#endif

/* Code executed at the end of each rule. */
#ifndef YY_BREAK
#define YY_BREAK break;
#endif

#define YY_RULE_SETUP \
	if ( yyleng > 0 ) \
		yy_current_buffer->yy_at_bol = \
				(yytext[yyleng - 1] == '\n'); \
	YY_USER_ACTION

YY_DECL
	{
	register yy_state_type yy_current_state;
	register char *yy_cp = NULL, *yy_bp = NULL;
	register int yy_act;

#line 17 "yas-grammar.lex"


#line 807 "lex.yy.c"

	if ( yy_init )
		{
		yy_init = 0;

#ifdef YY_USER_INIT
		YY_USER_INIT;
#endif

		if ( ! yy_start )
			yy_start = 1;	/* first start state */

		if ( ! yyin )
			yyin = stdin;

		if ( ! yyout )
			yyout = stdout;

		if ( ! yy_current_buffer )
			yy_current_buffer =
				yy_create_buffer( yyin, YY_BUF_SIZE );

		yy_load_buffer_state();
		}

	while ( 1 )		/* loops until end-of-file is reached */
		{
		yy_cp = yy_c_buf_p;

		/* Support of yytext. */
		*yy_cp = yy_hold_char;

		/* yy_bp points to the position in yy_ch_buf of the start of
		 * the current run.
		 */
		yy_bp = yy_cp;

		yy_current_state = yy_start;
		yy_current_state += YY_AT_BOL();
		yy_state_ptr = yy_state_buf;
		*yy_state_ptr++ = yy_current_state;
yy_match:
		do
			{
			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
				{
				yy_current_state = (int) yy_def[yy_current_state];
				if ( yy_current_state >= 257 )
					yy_c = yy_meta[(unsigned int) yy_c];
				}
			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
			*yy_state_ptr++ = yy_current_state;
			++yy_cp;
			}
		while ( yy_base[yy_current_state] != 658 );

yy_find_action:
		yy_current_state = *--yy_state_ptr;
		yy_lp = yy_accept[yy_current_state];
find_rule: /* we branch to this label when backing up */
		for ( ; ; ) /* until we find what rule we matched */
			{
			if ( yy_lp && yy_lp < yy_accept[yy_current_state + 1] )
				{
				yy_act = yy_acclist[yy_lp];
					{
					yy_full_match = yy_cp;
					break;
					}
				}
			--yy_cp;
			yy_current_state = *--yy_state_ptr;
			yy_lp = yy_accept[yy_current_state];
			}

		YY_DO_BEFORE_ACTION;


do_action:	/* This label is used only to access EOF actions. */


		switch ( yy_act )
	{ /* beginning of action switch */
case 1:
YY_RULE_SETUP
#line 19 "yas-grammar.lex"
{ save_line(yytext); REJECT;} /* Snarf input line */
	YY_BREAK
case 2:
YY_RULE_SETUP
#line 20 "yas-grammar.lex"
{finish_line(); lineno++;}
	YY_BREAK
case 3:
YY_RULE_SETUP
#line 21 "yas-grammar.lex"
{finish_line(); lineno++;}
	YY_BREAK
case 4:
YY_RULE_SETUP
#line 22 "yas-grammar.lex"
{finish_line(); lineno++;}
	YY_BREAK
case 5:
YY_RULE_SETUP
#line 23 "yas-grammar.lex"
{finish_line(); lineno++;}
	YY_BREAK
case 6:
YY_RULE_SETUP
#line 26 "yas-grammar.lex"
;
	YY_BREAK
case 7:
YY_RULE_SETUP
#line 27 "yas-grammar.lex"
;
	YY_BREAK
case 8:
YY_RULE_SETUP
#line 28 "yas-grammar.lex"
add_instr(yytext);
	YY_BREAK
case 9:
YY_RULE_SETUP
#line 29 "yas-grammar.lex"
add_reg(yytext);
	YY_BREAK
case 10:
YY_RULE_SETUP
#line 30 "yas-grammar.lex"
add_num(atoi(yytext));
	YY_BREAK
case 11:
YY_RULE_SETUP
#line 31 "yas-grammar.lex"
add_num(atoh(yytext));
	YY_BREAK
case 12:
YY_RULE_SETUP
#line 32 "yas-grammar.lex"
add_punct(*yytext);
	YY_BREAK
case 13:
YY_RULE_SETUP
#line 33 "yas-grammar.lex"
add_ident(yytext);
	YY_BREAK
case 14:
YY_RULE_SETUP
#line 34 "yas-grammar.lex"
{; BEGIN ERR;}
	YY_BREAK
case 15:
YY_RULE_SETUP
#line 35 "yas-grammar.lex"
{fail("Invalid line"); lineno++; BEGIN 0;}
	YY_BREAK
case 16:
YY_RULE_SETUP
#line 36 "yas-grammar.lex"
ECHO;
	YY_BREAK
#line 972 "lex.yy.c"
			case YY_STATE_EOF(INITIAL):
			case YY_STATE_EOF(ERR):
			case YY_STATE_EOF(COM):
				yyterminate();

	case YY_END_OF_BUFFER:
		{
		/* Amount of text matched not including the EOB char. */
		int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;

		/* Undo the effects of YY_DO_BEFORE_ACTION. */
		*yy_cp = yy_hold_char;
		YY_RESTORE_YY_MORE_OFFSET

		if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
			{
			/* We're scanning a new file or input source.  It's
			 * possible that this happened because the user
			 * just pointed yyin at a new source and called
			 * yylex().  If so, then we have to assure
			 * consistency between yy_current_buffer and our
			 * globals.  Here is the right place to do so, because
			 * this is the first action (other than possibly a
			 * back-up) that will match for the new input source.
			 */
			yy_n_chars = yy_current_buffer->yy_n_chars;
			yy_current_buffer->yy_input_file = yyin;
			yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
			}

		/* Note that here we test for yy_c_buf_p "<=" to the position
		 * of the first EOB in the buffer, since yy_c_buf_p will
		 * already have been incremented past the NUL character
		 * (since all states make transitions on EOB to the
		 * end-of-buffer state).  Contrast this with the test
		 * in input().
		 */
		if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
			{ /* This was really a NUL. */
			yy_state_type yy_next_state;

			yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;

			yy_current_state = yy_get_previous_state();

			/* Okay, we're now positioned to make the NUL
			 * transition.  We couldn't have
			 * yy_get_previous_state() go ahead and do it
			 * for us because it doesn't know how to deal
			 * with the possibility of jamming (and we don't
			 * want to build jamming into it because then it
			 * will run more slowly).
			 */

			yy_next_state = yy_try_NUL_trans( yy_current_state );

			yy_bp = yytext_ptr + YY_MORE_ADJ;

			if ( yy_next_state )
				{
				/* Consume the NUL. */
				yy_cp = ++yy_c_buf_p;
				yy_current_state = yy_next_state;
				goto yy_match;
				}

			else
				{
				yy_cp = yy_c_buf_p;
				goto yy_find_action;
				}
			}

		else switch ( yy_get_next_buffer() )
			{
			case EOB_ACT_END_OF_FILE:
				{
				yy_did_buffer_switch_on_eof = 0;

				if ( yywrap() )
					{
					/* Note: because we've taken care in
					 * yy_get_next_buffer() to have set up
					 * yytext, we can now set up
					 * yy_c_buf_p so that if some total
					 * hoser (like flex itself) wants to
					 * call the scanner after we return the
					 * YY_NULL, it'll still work - another
					 * YY_NULL will get returned.
					 */
					yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;

					yy_act = YY_STATE_EOF(YY_START);
					goto do_action;
					}

				else
					{
					if ( ! yy_did_buffer_switch_on_eof )
						YY_NEW_FILE;
					}
				break;
				}

			case EOB_ACT_CONTINUE_SCAN:
				yy_c_buf_p =
					yytext_ptr + yy_amount_of_matched_text;

				yy_current_state = yy_get_previous_state();

				yy_cp = yy_c_buf_p;
				yy_bp = yytext_ptr + YY_MORE_ADJ;
				goto yy_match;

			case EOB_ACT_LAST_MATCH:
				yy_c_buf_p =
				&yy_current_buffer->yy_ch_buf[yy_n_chars];

				yy_current_state = yy_get_previous_state();

				yy_cp = yy_c_buf_p;
				yy_bp = yytext_ptr + YY_MORE_ADJ;
				goto yy_find_action;
			}
		break;
		}

	default:
		YY_FATAL_ERROR(
			"fatal flex scanner internal error--no action found" );
	} /* end of action switch */
		} /* end of scanning one token */
	} /* end of yylex */


/* yy_get_next_buffer - try to read in a new buffer
 *
 * Returns a code representing an action:
 *	EOB_ACT_LAST_MATCH -
 *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
 *	EOB_ACT_END_OF_FILE - end of file
 */

static int yy_get_next_buffer()
	{
	register char *dest = yy_current_buffer->yy_ch_buf;
	register char *source = yytext_ptr;
	register int number_to_move, i;
	int ret_val;

	if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
		YY_FATAL_ERROR(
		"fatal flex scanner internal error--end of buffer missed" );

	if ( yy_current_buffer->yy_fill_buffer == 0 )
		{ /* Don't try to fill the buffer, so this is an EOF. */
		if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
			{
			/* We matched a single character, the EOB, so
			 * treat this as a final EOF.
			 */
			return EOB_ACT_END_OF_FILE;
			}

		else
			{
			/* We matched some text prior to the EOB, first
			 * process it.
			 */
			return EOB_ACT_LAST_MATCH;
			}
		}

	/* Try to read more data. */

	/* First move last chars to start of buffer. */
	number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;

	for ( i = 0; i < number_to_move; ++i )
		*(dest++) = *(source++);

	if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
		/* don't do the read, it's not guaranteed to return an EOF,
		 * just force an EOF
		 */
		yy_current_buffer->yy_n_chars = yy_n_chars = 0;

	else
		{
		int num_to_read =
			yy_current_buffer->yy_buf_size - number_to_move - 1;

		while ( num_to_read <= 0 )
			{ /* Not enough room in the buffer - grow it. */
#ifdef YY_USES_REJECT
			YY_FATAL_ERROR(
"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
#else

			/* just a shorter name for the current buffer */
			YY_BUFFER_STATE b = yy_current_buffer;

			int yy_c_buf_p_offset =
				(int) (yy_c_buf_p - b->yy_ch_buf);

			if ( b->yy_is_our_buffer )
				{
				int new_size = b->yy_buf_size * 2;

				if ( new_size <= 0 )
					b->yy_buf_size += b->yy_buf_size / 8;
				else
					b->yy_buf_size *= 2;

				b->yy_ch_buf = (char *)
					/* Include room in for 2 EOB chars. */
					yy_flex_realloc( (void *) b->yy_ch_buf,
							 b->yy_buf_size + 2 );
				}
			else
				/* Can't grow it, we don't own it. */
				b->yy_ch_buf = 0;

			if ( ! b->yy_ch_buf )
				YY_FATAL_ERROR(
				"fatal error - scanner input buffer overflow" );

			yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];

			num_to_read = yy_current_buffer->yy_buf_size -
						number_to_move - 1;
#endif
			}

		if ( num_to_read > YY_READ_BUF_SIZE )
			num_to_read = YY_READ_BUF_SIZE;

		/* Read in more data. */
		YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
			yy_n_chars, num_to_read );

		yy_current_buffer->yy_n_chars = yy_n_chars;
		}

	if ( yy_n_chars == 0 )
		{
		if ( number_to_move == YY_MORE_ADJ )
			{
			ret_val = EOB_ACT_END_OF_FILE;
			yyrestart( yyin );
			}

		else
			{
			ret_val = EOB_ACT_LAST_MATCH;
			yy_current_buffer->yy_buffer_status =
				YY_BUFFER_EOF_PENDING;
			}
		}

	else
		ret_val = EOB_ACT_CONTINUE_SCAN;

	yy_n_chars += number_to_move;
	yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
	yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;

	yytext_ptr = &yy_current_buffer->yy_ch_buf[0];

	return ret_val;
	}


/* yy_get_previous_state - get the state just before the EOB char was reached */

static yy_state_type yy_get_previous_state()
	{
	register yy_state_type yy_current_state;
	register char *yy_cp;

	yy_current_state = yy_start;
	yy_current_state += YY_AT_BOL();
	yy_state_ptr = yy_state_buf;
	*yy_state_ptr++ = yy_current_state;

	for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
		{
		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
			{
			yy_current_state = (int) yy_def[yy_current_state];
			if ( yy_current_state >= 257 )
				yy_c = yy_meta[(unsigned int) yy_c];
			}
		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
		*yy_state_ptr++ = yy_current_state;
		}

	return yy_current_state;
	}


/* yy_try_NUL_trans - try to make a transition on the NUL character
 *
 * synopsis
 *	next_state = yy_try_NUL_trans( current_state );
 */

#ifdef YY_USE_PROTOS
static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
#else
static yy_state_type yy_try_NUL_trans( yy_current_state )
yy_state_type yy_current_state;
#endif
	{
	register int yy_is_jam;

	register YY_CHAR yy_c = 1;
	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
		{
		yy_current_state = (int) yy_def[yy_current_state];
		if ( yy_current_state >= 257 )
			yy_c = yy_meta[(unsigned int) yy_c];
		}
	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
	yy_is_jam = (yy_current_state == 256);
	if ( ! yy_is_jam )
		*yy_state_ptr++ = yy_current_state;

	return yy_is_jam ? 0 : yy_current_state;
	}


#ifndef YY_NO_UNPUT
#ifdef YY_USE_PROTOS
static void yyunput( int c, register char *yy_bp )
#else
static void yyunput( c, yy_bp )
int c;
register char *yy_bp;
#endif
	{
	register char *yy_cp = yy_c_buf_p;

	/* undo effects of setting up yytext */
	*yy_cp = yy_hold_char;

	if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
		{ /* need to shift things up to make room */
		/* +2 for EOB chars. */
		register int number_to_move = yy_n_chars + 2;
		register char *dest = &yy_current_buffer->yy_ch_buf[
					yy_current_buffer->yy_buf_size + 2];
		register char *source =
				&yy_current_buffer->yy_ch_buf[number_to_move];

		while ( source > yy_current_buffer->yy_ch_buf )
			*--dest = *--source;

		yy_cp += (int) (dest - source);
		yy_bp += (int) (dest - source);
		yy_current_buffer->yy_n_chars =
			yy_n_chars = yy_current_buffer->yy_buf_size;

		if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
			YY_FATAL_ERROR( "flex scanner push-back overflow" );
		}

	*--yy_cp = (char) c;


	yytext_ptr = yy_bp;
	yy_hold_char = *yy_cp;
	yy_c_buf_p = yy_cp;
	}
#endif	/* ifndef YY_NO_UNPUT */


#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput()
#else
static int input()
#endif
	{
	int c;

	*yy_c_buf_p = yy_hold_char;

	if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
		{
		/* yy_c_buf_p now points to the character we want to return.
		 * If this occurs *before* the EOB characters, then it's a
		 * valid NUL; if not, then we've hit the end of the buffer.
		 */
		if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
			/* This was really a NUL. */
			*yy_c_buf_p = '\0';

		else
			{ /* need more input */
			int offset = yy_c_buf_p - yytext_ptr;
			++yy_c_buf_p;

			switch ( yy_get_next_buffer() )
				{
				case EOB_ACT_LAST_MATCH:
					/* This happens because yy_g_n_b()
					 * sees that we've accumulated a
					 * token and flags that we need to
					 * try matching the token before
					 * proceeding.  But for input(),
					 * there's no matching to consider.
					 * So convert the EOB_ACT_LAST_MATCH
					 * to EOB_ACT_END_OF_FILE.
					 */

					/* Reset buffer status. */
					yyrestart( yyin );

					/* fall through */

				case EOB_ACT_END_OF_FILE:
					{
					if ( yywrap() )
						return EOF;

					if ( ! yy_did_buffer_switch_on_eof )
						YY_NEW_FILE;
#ifdef __cplusplus
					return yyinput();
#else
					return input();
#endif
					}

				case EOB_ACT_CONTINUE_SCAN:
					yy_c_buf_p = yytext_ptr + offset;
					break;
				}
			}
		}

	c = *(unsigned char *) yy_c_buf_p;	/* cast for 8-bit char's */
	*yy_c_buf_p = '\0';	/* preserve yytext */
	yy_hold_char = *++yy_c_buf_p;

	yy_current_buffer->yy_at_bol = (c == '\n');

	return c;
	}
#endif /* YY_NO_INPUT */

#ifdef YY_USE_PROTOS
void yyrestart( FILE *input_file )
#else
void yyrestart( input_file )
FILE *input_file;
#endif
	{
	if ( ! yy_current_buffer )
		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );

	yy_init_buffer( yy_current_buffer, input_file );
	yy_load_buffer_state();
	}


#ifdef YY_USE_PROTOS
void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
#else
void yy_switch_to_buffer( new_buffer )
YY_BUFFER_STATE new_buffer;
#endif
	{
	if ( yy_current_buffer == new_buffer )
		return;

	if ( yy_current_buffer )
		{
		/* Flush out information for old buffer. */
		*yy_c_buf_p = yy_hold_char;
		yy_current_buffer->yy_buf_pos = yy_c_buf_p;
		yy_current_buffer->yy_n_chars = yy_n_chars;
		}

	yy_current_buffer = new_buffer;
	yy_load_buffer_state();

	/* We don't actually know whether we did this switch during
	 * EOF (yywrap()) processing, but the only time this flag
	 * is looked at is after yywrap() is called, so it's safe
	 * to go ahead and always set it.
	 */
	yy_did_buffer_switch_on_eof = 1;
	}


#ifdef YY_USE_PROTOS
void yy_load_buffer_state( void )
#else
void yy_load_buffer_state()
#endif
	{
	yy_n_chars = yy_current_buffer->yy_n_chars;
	yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
	yyin = yy_current_buffer->yy_input_file;
	yy_hold_char = *yy_c_buf_p;
	}


#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
#else
YY_BUFFER_STATE yy_create_buffer( file, size )
FILE *file;
int size;
#endif
	{
	YY_BUFFER_STATE b;

	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
	if ( ! b )
		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );

	b->yy_buf_size = size;

	/* yy_ch_buf has to be 2 characters longer than the size given because
	 * we need to put in 2 end-of-buffer characters.
	 */
	b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
	if ( ! b->yy_ch_buf )
		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );

	b->yy_is_our_buffer = 1;

	yy_init_buffer( b, file );

	return b;
	}


#ifdef YY_USE_PROTOS
void yy_delete_buffer( YY_BUFFER_STATE b )
#else
void yy_delete_buffer( b )
YY_BUFFER_STATE b;
#endif
	{
	if ( ! b )
		return;

	if ( b == yy_current_buffer )
		yy_current_buffer = (YY_BUFFER_STATE) 0;

	if ( b->yy_is_our_buffer )
		yy_flex_free( (void *) b->yy_ch_buf );

	yy_flex_free( (void *) b );
	}



#ifdef YY_USE_PROTOS
void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
#else
void yy_init_buffer( b, file )
YY_BUFFER_STATE b;
FILE *file;
#endif


	{
	yy_flush_buffer( b );

	b->yy_input_file = file;
	b->yy_fill_buffer = 1;

#if YY_ALWAYS_INTERACTIVE
	b->yy_is_interactive = 1;
#else
#if YY_NEVER_INTERACTIVE
	b->yy_is_interactive = 0;
#else
	b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
#endif
#endif
	}


#ifdef YY_USE_PROTOS
void yy_flush_buffer( YY_BUFFER_STATE b )
#else
void yy_flush_buffer( b )
YY_BUFFER_STATE b;
#endif

	{
	if ( ! b )
		return;

	b->yy_n_chars = 0;

	/* We always need two end-of-buffer characters.  The first causes
	 * a transition to the end-of-buffer state.  The second causes
	 * a jam in that state.
	 */
	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;

	b->yy_buf_pos = &b->yy_ch_buf[0];

	b->yy_at_bol = 1;
	b->yy_buffer_status = YY_BUFFER_NEW;

	if ( b == yy_current_buffer )
		yy_load_buffer_state();
	}


#ifndef YY_NO_SCAN_BUFFER
#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
#else
YY_BUFFER_STATE yy_scan_buffer( base, size )
char *base;
yy_size_t size;
#endif
	{
	YY_BUFFER_STATE b;

	if ( size < 2 ||
	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
	     base[size-1] != YY_END_OF_BUFFER_CHAR )
		/* They forgot to leave room for the EOB's. */
		return 0;

	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
	if ( ! b )
		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );

	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
	b->yy_buf_pos = b->yy_ch_buf = base;
	b->yy_is_our_buffer = 0;
	b->yy_input_file = 0;
	b->yy_n_chars = b->yy_buf_size;
	b->yy_is_interactive = 0;
	b->yy_at_bol = 1;
	b->yy_fill_buffer = 0;
	b->yy_buffer_status = YY_BUFFER_NEW;

	yy_switch_to_buffer( b );

	return b;
	}
#endif


#ifndef YY_NO_SCAN_STRING
#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
#else
YY_BUFFER_STATE yy_scan_string( yy_str )
yyconst char *yy_str;
#endif
	{
	int len;
	for ( len = 0; yy_str[len]; ++len )
		;

	return yy_scan_bytes( yy_str, len );
	}
#endif


#ifndef YY_NO_SCAN_BYTES
#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
#else
YY_BUFFER_STATE yy_scan_bytes( bytes, len )
yyconst char *bytes;
int len;
#endif
	{
	YY_BUFFER_STATE b;
	char *buf;
	yy_size_t n;
	int i;

	/* Get memory for full buffer, including space for trailing EOB's. */
	n = len + 2;
	buf = (char *) yy_flex_alloc( n );
	if ( ! buf )
		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );

	for ( i = 0; i < len; ++i )
		buf[i] = bytes[i];

	buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;

	b = yy_scan_buffer( buf, n );
	if ( ! b )
		YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );

	/* It's okay to grow etc. this buffer, and we should throw it
	 * away when we're done.
	 */
	b->yy_is_our_buffer = 1;

	return b;
	}
#endif


#ifndef YY_NO_PUSH_STATE
#ifdef YY_USE_PROTOS
static void yy_push_state( int new_state )
#else
static void yy_push_state( new_state )
int new_state;
#endif
	{
	if ( yy_start_stack_ptr >= yy_start_stack_depth )
		{
		yy_size_t new_size;

		yy_start_stack_depth += YY_START_STACK_INCR;
		new_size = yy_start_stack_depth * sizeof( int );

		if ( ! yy_start_stack )
			yy_start_stack = (int *) yy_flex_alloc( new_size );

		else
			yy_start_stack = (int *) yy_flex_realloc(
					(void *) yy_start_stack, new_size );

		if ( ! yy_start_stack )
			YY_FATAL_ERROR(
			"out of memory expanding start-condition stack" );
		}

	yy_start_stack[yy_start_stack_ptr++] = YY_START;

	BEGIN(new_state);
	}
#endif


#ifndef YY_NO_POP_STATE
static void yy_pop_state()
	{
	if ( --yy_start_stack_ptr < 0 )
		YY_FATAL_ERROR( "start-condition stack underflow" );

	BEGIN(yy_start_stack[yy_start_stack_ptr]);
	}
#endif


#ifndef YY_NO_TOP_STATE
static int yy_top_state()
	{
	return yy_start_stack[yy_start_stack_ptr - 1];
	}
#endif

#ifndef YY_EXIT_FAILURE
#define YY_EXIT_FAILURE 2
#endif

#ifdef YY_USE_PROTOS
static void yy_fatal_error( yyconst char msg[] )
#else
static void yy_fatal_error( msg )
char msg[];
#endif
	{
	(void) fprintf( stderr, "%s\n", msg );
	exit( YY_EXIT_FAILURE );
	}



/* Redefine yyless() so it works in section 3 code. */

#undef yyless
#define yyless(n) \
	do \
		{ \
		/* Undo effects of setting up yytext. */ \
		yytext[yyleng] = yy_hold_char; \
		yy_c_buf_p = yytext + n; \
		yy_hold_char = *yy_c_buf_p; \
		*yy_c_buf_p = '\0'; \
		yyleng = n; \
		} \
	while ( 0 )


/* Internal utility routines. */

#ifndef yytext_ptr
#ifdef YY_USE_PROTOS
static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
#else
static void yy_flex_strncpy( s1, s2, n )
char *s1;
yyconst char *s2;
int n;
#endif
	{
	register int i;
	for ( i = 0; i < n; ++i )
		s1[i] = s2[i];
	}
#endif

#ifdef YY_NEED_STRLEN
#ifdef YY_USE_PROTOS
static int yy_flex_strlen( yyconst char *s )
#else
static int yy_flex_strlen( s )
yyconst char *s;
#endif
	{
	register int n;
	for ( n = 0; s[n]; ++n )
		;

	return n;
	}
#endif


#ifdef YY_USE_PROTOS
static void *yy_flex_alloc( yy_size_t size )
#else
static void *yy_flex_alloc( size )
yy_size_t size;
#endif
	{
	return (void *) malloc( size );
	}

#ifdef YY_USE_PROTOS
static void *yy_flex_realloc( void *ptr, yy_size_t size )
#else
static void *yy_flex_realloc( ptr, size )
void *ptr;
yy_size_t size;
#endif
	{
	/* The cast to (char *) in the following accommodates both
	 * implementations that use char* generic pointers, and those
	 * that use void* generic pointers.  It works with the latter
	 * because both ANSI C and C++ allow castless assignment from
	 * any pointer type to void*, and deal with argument conversions
	 * as though doing an assignment.
	 */
	return (void *) realloc( (char *) ptr, size );
	}

#ifdef YY_USE_PROTOS
static void yy_flex_free( void *ptr )
#else
static void yy_flex_free( ptr )
void *ptr;
#endif
	{
	free( ptr );
	}

#if YY_MAIN
int main()
	{
	yylex();
	return 0;
	}
#endif
#line 36 "yas-grammar.lex"


unsigned int atoh(const char *s)
{
    return(strtoul(s, NULL, 16));
}
sim/seq/0000700005644400000240000000000011715057306010736 5ustar  tmsgradsim/seq/seq-std.hcl0000600005644400000240000001513211336103306013001 0ustar  tmsgrad#/* $begin seq-all-hcl */
####################################################################
#  HCL Description of Control for Single Cycle Y86 Processor SEQ   #
#  Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010       #
####################################################################

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int gen_pc(){return 0;}'
quote 'int main(int argc, char *argv[])'
quote '  {plusmode=0;return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes                  #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced explicitly #####
intsig RESP     'REG_ESP'    	# Stack Pointer
intsig RNONE    'REG_NONE'   	# Special value indicating "no register"

##### ALU Functions referenced explicitly                            #####
intsig ALUADD	'A_ADD'		# ALU should add its arguments

##### Possible instruction status values                             #####
intsig SAOK	'STAT_AOK'		# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ####################

##### Fetch stage inputs		#####
intsig pc 'pc'				# Program counter
##### Fetch stage computations		#####
intsig imem_icode 'imem_icode'		# icode field from instruction memory
intsig imem_ifun  'imem_ifun' 		# ifun field from instruction memory
intsig icode	  'icode'		# Instruction control code
intsig ifun	  'ifun'		# Instruction function
intsig rA	  'ra'			# rA field from instruction
intsig rB	  'rb'			# rB field from instruction
intsig valC	  'valc'		# Constant from instruction
intsig valP	  'valp'		# Address of following instruction
boolsig imem_error 'imem_error'		# Error signal from instruction memory
boolsig instr_valid 'instr_valid'	# Is fetched instruction valid?

##### Decode stage computations		#####
intsig valA	'vala'			# Value from register A port
intsig valB	'valb'			# Value from register B port

##### Execute stage computations	#####
intsig valE	'vale'			# Value computed by ALU
boolsig Cnd	'cond'			# Branch test

##### Memory stage computations		#####
intsig valM	'valm'			# Value read from memory
boolsig dmem_error 'dmem_error'		# Error signal from data memory


####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

# Determine instruction code
int icode = [
	imem_error: INOP;
	1: imem_icode;		# Default: get from instruction memory
];

# Determine instruction function
int ifun = [
	imem_error: FNONE;
	1: imem_ifun;		# Default: get from instruction memory
];

bool instr_valid = icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	       IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Does fetched instruction require a regid byte?
bool need_regids =
	icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

################ Decode Stage    ###################################

## What register should be used as the A source?
int srcA = [
	icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : rA;
	icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int srcB = [
	icode in { IOPL, IRMMOVL, IMRMOVL  } : rB;
	icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int dstE = [
	icode in { IRRMOVL } && Cnd : rB;
	icode in { IIRMOVL, IOPL} : rB;
	icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int dstM = [
	icode in { IMRMOVL, IPOPL } : rA;
	1 : RNONE;  # Don't write any register
];

################ Execute Stage   ###################################

## Select input A to ALU
int aluA = [
	icode in { IRRMOVL, IOPL } : valA;
	icode in { IIRMOVL, IRMMOVL, IMRMOVL } : valC;
	icode in { ICALL, IPUSHL } : -4;
	icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		      IPUSHL, IRET, IPOPL } : valB;
	icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	icode == IOPL : ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = icode in { IOPL };

################ Memory Stage    ###################################

## Set read control signal
bool mem_read = icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = icode in { IRMMOVL, IPUSHL, ICALL };

## Select memory address
int mem_addr = [
	icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : valE;
	icode in { IPOPL, IRET } : valA;
	# Other instructions don't need address
];

## Select memory input data
int mem_data = [
	# Value from register
	icode in { IRMMOVL, IPUSHL } : valA;
	# Return PC
	icode == ICALL : valP;
	# Default: Don't write anything
];

## Determine instruction status
int Stat = [
	imem_error || dmem_error : SADR;
	!instr_valid: SINS;
	icode == IHALT : SHLT;
	1 : SAOK;
];

################ Program Counter Update ############################

## What address should instruction be fetched at

int new_pc = [
	# Call.  Use instruction constant
	icode == ICALL : valC;
	# Taken branch.  Use instruction constant
	icode == IJXX && Cnd : valC;
	# Completion of RET instruction.  Use value from stack
	icode == IRET : valM;
	# Default: Use incremented PC
	1 : valP;
];
#/* $end seq-all-hcl */
sim/seq/seq-full.hcl0000600005644400000240000001574011336103306013156 0ustar  tmsgrad#/* $begin seq-all-hcl */
####################################################################
#  HCL Description of Control for Single Cycle Y86 Processor SEQ   #
#  Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010       #
####################################################################

## Your task is to implement the iaddl and leave instructions
## The file contains a declaration of the icodes
## for iaddl (IIADDL) and leave (ILEAVE).
## Your job is to add the rest of the logic to make it work

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int gen_pc(){return 0;}'
quote 'int main(int argc, char *argv[])'
quote '  {plusmode=0;return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'
# Instruction code for iaddl instruction
intsig IIADDL	'I_IADDL'
# Instruction code for leave instruction
intsig ILEAVE	'I_LEAVE'

##### Symbolic represenations of Y86 function codes                  #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced explicitly #####
intsig RESP     'REG_ESP'    	# Stack Pointer
intsig REBP     'REG_EBP'    	# Frame Pointer
intsig RNONE    'REG_NONE'   	# Special value indicating "no register"

##### ALU Functions referenced explicitly                            #####
intsig ALUADD	'A_ADD'		# ALU should add its arguments

##### Possible instruction status values                             #####
intsig SAOK	'STAT_AOK'		# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ####################

##### Fetch stage inputs		#####
intsig pc 'pc'				# Program counter
##### Fetch stage computations		#####
intsig imem_icode 'imem_icode'		# icode field from instruction memory
intsig imem_ifun  'imem_ifun' 		# ifun field from instruction memory
intsig icode	  'icode'		# Instruction control code
intsig ifun	  'ifun'		# Instruction function
intsig rA	  'ra'			# rA field from instruction
intsig rB	  'rb'			# rB field from instruction
intsig valC	  'valc'		# Constant from instruction
intsig valP	  'valp'		# Address of following instruction
boolsig imem_error 'imem_error'		# Error signal from instruction memory
boolsig instr_valid 'instr_valid'	# Is fetched instruction valid?

##### Decode stage computations		#####
intsig valA	'vala'			# Value from register A port
intsig valB	'valb'			# Value from register B port

##### Execute stage computations	#####
intsig valE	'vale'			# Value computed by ALU
boolsig Cnd	'cond'			# Branch test

##### Memory stage computations		#####
intsig valM	'valm'			# Value read from memory
boolsig dmem_error 'dmem_error'		# Error signal from data memory


####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

# Determine instruction code
int icode = [
	imem_error: INOP;
	1: imem_icode;		# Default: get from instruction memory
];

# Determine instruction function
int ifun = [
	imem_error: FNONE;
	1: imem_ifun;		# Default: get from instruction memory
];

bool instr_valid = icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	       IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Does fetched instruction require a regid byte?
bool need_regids =
	icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

################ Decode Stage    ###################################

## What register should be used as the A source?
int srcA = [
	icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : rA;
	icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int srcB = [
	icode in { IOPL, IRMMOVL, IMRMOVL  } : rB;
	icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int dstE = [
	icode in { IRRMOVL } && Cnd : rB;
	icode in { IIRMOVL, IOPL} : rB;
	icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int dstM = [
	icode in { IMRMOVL, IPOPL } : rA;
	1 : RNONE;  # Don't write any register
];

################ Execute Stage   ###################################

## Select input A to ALU
int aluA = [
	icode in { IRRMOVL, IOPL } : valA;
	icode in { IIRMOVL, IRMMOVL, IMRMOVL } : valC;
	icode in { ICALL, IPUSHL } : -4;
	icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		      IPUSHL, IRET, IPOPL } : valB;
	icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	icode == IOPL : ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = icode in { IOPL };

################ Memory Stage    ###################################

## Set read control signal
bool mem_read = icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = icode in { IRMMOVL, IPUSHL, ICALL };

## Select memory address
int mem_addr = [
	icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : valE;
	icode in { IPOPL, IRET } : valA;
	# Other instructions don't need address
];

## Select memory input data
int mem_data = [
	# Value from register
	icode in { IRMMOVL, IPUSHL } : valA;
	# Return PC
	icode == ICALL : valP;
	# Default: Don't write anything
];

## Determine instruction status
int Stat = [
	imem_error || dmem_error : SADR;
	!instr_valid: SINS;
	icode == IHALT : SHLT;
	1 : SAOK;
];

################ Program Counter Update ############################

## What address should instruction be fetched at

int new_pc = [
	# Call.  Use instruction constant
	icode == ICALL : valC;
	# Taken branch.  Use instruction constant
	icode == IJXX && Cnd : valC;
	# Completion of RET instruction.  Use value from stack
	icode == IRET : valM;
	# Default: Use incremented PC
	1 : valP;
];
#/* $end seq-all-hcl */
sim/seq/seq+-std.hcl0000600005644400000240000001571711336103306013065 0ustar  tmsgrad#/* $begin seq-all-hcl */
####################################################################
#  HCL Description of Control for Single Cycle Y86 Processor SEQ+  #
#  Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010       #
####################################################################

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int gen_new_pc(){return 0;}'
quote 'int main(int argc, char *argv[])'
quote '  {plusmode=1;return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes                  #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced explicitly #####
intsig RESP     'REG_ESP'    	# Stack Pointer
intsig RNONE    'REG_NONE'   	# Special value indicating "no register"

##### ALU Functions referenced explicitly                            #####
intsig ALUADD	'A_ADD'		# ALU should add its arguments

##### Possible instruction status values                             #####
intsig SAOK	'STAT_AOK'		# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ####################

##### PC stage inputs			#####

## All of these values are based on those from previous instruction
intsig  pIcode 'prev_icode'		# Instr. control code
intsig  pValC  'prev_valc'		# Constant from instruction
intsig  pValM  'prev_valm'		# Value read from memory
intsig  pValP  'prev_valp'		# Incremented program counter
boolsig pCnd 'prev_bcond'		# Condition flag

##### Fetch stage computations		#####
intsig imem_icode 'imem_icode'		# icode field from instruction memory
intsig imem_ifun  'imem_ifun' 		# ifun field from instruction memory
intsig icode	  'icode'		# Instruction control code
intsig ifun	  'ifun'		# Instruction function
intsig rA	  'ra'			# rA field from instruction
intsig rB	  'rb'			# rB field from instruction
intsig valC	  'valc'		# Constant from instruction
intsig valP	  'valp'		# Address of following instruction
boolsig imem_error 'imem_error'		# Error signal from instruction memory
boolsig instr_valid 'instr_valid'	# Is fetched instruction valid?

##### Decode stage computations		#####
intsig valA	'vala'			# Value from register A port
intsig valB	'valb'			# Value from register B port

##### Execute stage computations	#####
intsig valE	'vale'			# Value computed by ALU
boolsig Cnd	'cond'			# Branch test

##### Memory stage computations		#####
intsig valM	'valm'			# Value read from memory
boolsig dmem_error 'dmem_error'		# Error signal from data memory


####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Program Counter Computation #######################

# Compute fetch location for this instruction based on results from
# previous instruction.

int pc = [
	# Call.  Use instruction constant
	pIcode == ICALL : pValC;
	# Taken branch.  Use instruction constant
	pIcode == IJXX && pCnd : pValC;
	# Completion of RET instruction.  Use value from stack
	pIcode == IRET : pValM;
	# Default: Use incremented PC
	1 : pValP;
];
#/* $end seq-plus-pc-hcl */

################ Fetch Stage     ###################################

# Determine instruction code
int icode = [
	imem_error: INOP;
	1: imem_icode;		# Default: get from instruction memory
];

# Determine instruction function
int ifun = [
	imem_error: FNONE;
	1: imem_ifun;		# Default: get from instruction memory
];

bool instr_valid = icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	       IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Does fetched instruction require a regid byte?
bool need_regids =
	icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

################ Decode Stage    ###################################

## What register should be used as the A source?
int srcA = [
	icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : rA;
	icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int srcB = [
	icode in { IOPL, IRMMOVL, IMRMOVL  } : rB;
	icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int dstE = [
	icode in { IRRMOVL } && Cnd : rB;
	icode in { IIRMOVL, IOPL} : rB;
	icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int dstM = [
	icode in { IMRMOVL, IPOPL } : rA;
	1 : RNONE;  # Don't write any register
];

################ Execute Stage   ###################################

## Select input A to ALU
int aluA = [
	icode in { IRRMOVL, IOPL } : valA;
	icode in { IIRMOVL, IRMMOVL, IMRMOVL } : valC;
	icode in { ICALL, IPUSHL } : -4;
	icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		      IPUSHL, IRET, IPOPL } : valB;
	icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	icode == IOPL : ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = icode in { IOPL };

################ Memory Stage    ###################################

## Set read control signal
bool mem_read = icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = icode in { IRMMOVL, IPUSHL, ICALL };

## Select memory address
int mem_addr = [
	icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : valE;
	icode in { IPOPL, IRET } : valA;
	# Other instructions don't need address
];

## Select memory input data
int mem_data = [
	# Value from register
	icode in { IRMMOVL, IPUSHL } : valA;
	# Return PC
	icode == ICALL : valP;
	# Default: Don't write anything
];

## Determine instruction status
int Stat = [
	imem_error || dmem_error : SADR;
	!instr_valid: SINS;
	icode == IHALT : SHLT;
	1 : SAOK;
];
#/* $end seq-all-hcl */
sim/seq/ssim.c0000700005644400000240000006774011243013044012061 0ustar  tmsgrad/***********************************************************************
 *
 * ssim.c - Sequential Y86 simulator
 * 
 * Copyright (c) 2002, R. Bryant and D. O'Hallaron, All rights reserved.
 * May not be used, modified, or copied without permission.
 ***********************************************************************/ 

#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <unistd.h>
#include <string.h>
#include "isa.h"
#include "sim.h"

#define MAXBUF 1024

#ifdef HAS_GUI
#include <tk.h>
#endif /* HAS_GUI */

#define MAXARGS 128
#define MAXBUF 1024
#define TKARGS 3

/***************
 * Begin Globals
 ***************/

/* Simulator name defined and initialized by the compiled HCL file */
/* according to the -n argument supplied to hcl2c */
extern char simname[];

/* SEQ=0, SEQ+=1. Modified by HCL main() */
int plusmode = 0; 

/* Parameters modifed by the command line */
int gui_mode = FALSE;    /* Run in GUI mode instead of TTY mode? (-g) */
char *object_filename;   /* The input object file name. */
FILE *object_file;       /* Input file handle */
bool_t verbosity = 2;    /* Verbosity level [TTY only] (-v) */ 
int instr_limit = 10000; /* Instruction limit [TTY only] (-l) */
bool_t do_check = FALSE; /* Test with YIS? [TTY only] (-t) */

/************* 
 * End Globals 
 *************/


/***************************
 * Begin function prototypes 
 ***************************/

static void usage(char *name);           /* Print helpful usage message */
static void run_tty_sim();               /* Run simulator in TTY mode */

#ifdef HAS_GUI
void addAppCommands(Tcl_Interp *interp); /* Add application-dependent commands */
#endif /* HAS_GUI */

/*************************
 * End function prototypes
 *************************/


/*******************************************************************
 * Part 1: This part is the initial entry point that handles general
 * initialization. It parses the command line and does any necessary
 * setup to run in either TTY or GUI mode, and then starts the
 * simulation.
 *******************************************************************/

/* 
 * sim_main - main simulator routine. This function is called from the
 * main() routine in the HCL file.
 */
int sim_main(int argc, char **argv)
{
    int i;
    int c;
    char *myargv[MAXARGS];

    
    /* Parse the command line arguments */
    while ((c = getopt(argc, argv, "htgl:v:")) != -1) {
	switch(c) {
	case 'h':
	    usage(argv[0]);
	    break;
	case 'l':
	    instr_limit = atoi(optarg);
	    break;
	case 'v':
	    verbosity = atoi(optarg);
	    if (verbosity < 0 || verbosity > 2) {
		printf("Invalid verbosity %d\n", verbosity);
		usage(argv[0]);
	    }
	    break;
	case 't':
	    do_check = TRUE;
	    break;
	case 'g':
	    gui_mode = TRUE;
	    break;
	default:
	    printf("Invalid option '%c'\n", c);
	    usage(argv[0]);
	    break;
	}
    }


    /* Do we have too many arguments? */
    if (optind < argc - 1) {
	printf("Too many command line arguments:");
	for (i = optind; i < argc; i++)
	    printf(" %s", argv[i]);
	printf("\n");
	usage(argv[0]);
    }


    /* The single unflagged argument should be the object file name */
    object_filename = NULL;
    object_file = NULL;
    if (optind < argc) {
	object_filename = argv[optind];
	object_file = fopen(object_filename, "r");
	if (!object_file) {
	    fprintf(stderr, "Couldn't open object file %s\n", object_filename);
	    exit(1);
	}
    }


    /* Run the simulator in GUI mode (-g flag) */
    if (gui_mode) {

#ifndef HAS_GUI
	printf("To run in GUI mode, you must recompile with the HAS_GUI constant defined.\n");
	exit(1);
#endif /* HAS_GUI */

	/* In GUI mode, we must specify the object file on command line */ 
	if (!object_file) {
	    printf("Missing object file argument in GUI mode\n");
	    usage(argv[0]);
	}

	/* Build the command line for the GUI simulator */
	for (i = 0; i < TKARGS; i++) {
	    if ((myargv[i] = malloc(MAXBUF*sizeof(char))) == NULL) {
		perror("malloc error");
		exit(1);
	    }
	}
	strcpy(myargv[0], argv[0]);

#if 0
	printf("argv[0]=%s\n", argv[0]);
	{
	    char buf[1000]; 
	    getcwd(buf, 1000);
	    printf("cwd=%s\n", buf);
	}
#endif

	if (plusmode == 0) /* SEQ */
	    strcpy(myargv[1], "seq.tcl");
	else
	    strcpy(myargv[1], "seq+.tcl");
	strcpy(myargv[2], object_filename);
	myargv[3] = NULL;

	/* Start the GUI simulator */
#ifdef HAS_GUI
	Tk_Main(TKARGS, myargv, Tcl_AppInit);
#endif /* HAS_GUI */
	exit(0);
    }

    /* Otherwise, run the simulator in TTY mode (no -g flag) */
    run_tty_sim();

    exit(0);
}

/* 
 * run_tty_sim - Run the simulator in TTY mode
 */
static void run_tty_sim() 
{
    int icount = 0;
    status = STAT_AOK;
    cc_t result_cc = 0;
    int byte_cnt = 0;
    mem_t mem0, reg0;
    state_ptr isa_state = NULL;


    /* In TTY mode, the default object file comes from stdin */
    if (!object_file) {
	object_file = stdin;
    }

    /* Initializations */
    if (verbosity >= 2)
	sim_set_dumpfile(stdout);
    sim_init();

    /* Emit simulator name */
    printf("%s\n", simname);

    byte_cnt = load_mem(mem, object_file, 1);
    if (byte_cnt == 0) {
	fprintf(stderr, "No lines of code found\n");
	exit(1);
    } else if (verbosity >= 2) {
	printf("%d bytes of code read\n", byte_cnt);
    }
    fclose(object_file);
    if (do_check) {
	isa_state = new_state(0);
	free_mem(isa_state->r);
	free_mem(isa_state->m);
	isa_state->m = copy_mem(mem);
	isa_state->r = copy_mem(reg);
	isa_state->cc = cc;
    }

    mem0 = copy_mem(mem);
    reg0 = copy_mem(reg);
    

    icount = sim_run(instr_limit, &status, &result_cc);
    if (verbosity > 0) {
	printf("%d instructions executed\n", icount);
	printf("Status = %s\n", stat_name(status));
	printf("Condition Codes: %s\n", cc_name(result_cc));
	printf("Changed Register State:\n");
	diff_reg(reg0, reg, stdout);
	printf("Changed Memory State:\n");
	diff_mem(mem0, mem, stdout);
    }
    if (do_check) {
	byte_t e = STAT_AOK;
	int step;
	bool_t match = TRUE;

	for (step = 0; step < instr_limit && e == STAT_AOK; step++) {
	    e = step_state(isa_state, stdout);
	}

	if (diff_reg(isa_state->r, reg, NULL)) {
	    match = FALSE;
	    if (verbosity > 0) {
		printf("ISA Register != Pipeline Register File\n");
		diff_reg(isa_state->r, reg, stdout);
	    }
	}
	if (diff_mem(isa_state->m, mem, NULL)) {
	    match = FALSE;
	    if (verbosity > 0) {
		printf("ISA Memory != Pipeline Memory\n");
		diff_mem(isa_state->m, mem, stdout);
	    }
	}
	if (isa_state->cc != result_cc) {
	    match = FALSE;
	    if (verbosity > 0) {
		printf("ISA Cond. Codes (%s) != Pipeline Cond. Codes (%s)\n",
		       cc_name(isa_state->cc), cc_name(result_cc));
	    }
	}
	if (match) {
	    printf("ISA Check Succeeds\n");
	} else {
	    printf("ISA Check Fails\n");
	}
    }
}



/*
 * usage - print helpful diagnostic information
 */
static void usage(char *name)
{
    printf("Usage: %s [-htg] [-l m] [-v n] file.yo\n", name);
    printf("file.yo required in GUI mode, optional in TTY mode (default stdin)\n");
    printf("   -h     Print this message\n");
    printf("   -g     Run in GUI mode instead of TTY mode (default TTY)\n");  
    printf("   -l m   Set instruction limit to m [TTY mode only] (default %d)\n", instr_limit);
    printf("   -v n   Set verbosity level to 0 <= n <= 2 [TTY mode only] (default %d)\n", verbosity);
    printf("   -t     Test result against ISA simulator (yis) [TTY mode only]\n");
    exit(0);
}



/*********************************************************
 * Part 2: This part contains the core simulator routines.
 *********************************************************/

/**********************
 * Begin Part 2 Globals
 **********************/

/*
 * Variables related to hardware units in the processor
 */
mem_t mem;  /* Instruction and data memory */
int minAddr = 0;
int memCnt = 0;

/* Other processor state */
mem_t reg;               /* Register file */
cc_t cc = DEFAULT_CC;    /* Condition code register */
cc_t cc_in = DEFAULT_CC; /* Input to condition code register */

/* 
 * SEQ+: Results computed by previous instruction.
 * Used to compute PC in current instruction 
 */
byte_t prev_icode = I_NOP;
byte_t prev_ifun = 0;
word_t prev_valc = 0;
word_t prev_valm = 0;
word_t prev_valp = 0;
bool_t prev_bcond = FALSE;

byte_t prev_icode_in = I_NOP;
byte_t prev_ifun_in = 0;
word_t prev_valc_in = 0;
word_t prev_valm_in = 0;
word_t prev_valp_in = 0;
bool_t prev_bcond_in = FALSE;


/* Program Counter */
word_t pc = 0; /* Program counter value */
word_t pc_in = 0;/* Input to program counter */

/* Intermediate values */
byte_t imem_icode = I_NOP;
byte_t imem_ifun = F_NONE;
byte_t icode = I_NOP;
word_t ifun = 0;
byte_t instr = HPACK(I_NOP, F_NONE);
word_t ra = REG_NONE;
word_t rb = REG_NONE;
word_t valc = 0;
word_t valp = 0;
bool_t imem_error;
bool_t instr_valid;

word_t srcA = REG_NONE;
word_t srcB = REG_NONE;
word_t destE = REG_NONE;
word_t destM = REG_NONE;
word_t vala = 0;
word_t valb = 0;
word_t vale = 0;

bool_t bcond = FALSE;
bool_t cond = FALSE;
word_t valm = 0;
bool_t dmem_error;

bool_t mem_write = FALSE;
word_t mem_addr = 0;
word_t mem_data = 0;
byte_t status = STAT_AOK;


/* Values computed by control logic */
int gen_pc();  /* SEQ+ */
int gen_icode();
int gen_ifun();
int gen_need_regids();
int gen_need_valC();
int gen_instr_valid();
int gen_srcA();
int gen_srcB();
int gen_dstE();
int gen_dstM();
int gen_aluA();
int gen_aluB();
int gen_alufun();
int gen_set_cc();
int gen_mem_addr();
int gen_mem_data();
int gen_mem_read();
int gen_mem_write();
int gen_Stat();
int gen_new_pc();

/* Log file */
FILE *dumpfile = NULL;

#ifdef HAS_GUI
/* Representations of digits */
static char digits[16] =
    {'0', '1', '2', '3', '4', '5', '6', '7',
     '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'};
#endif /* HAS_GUI */

/********************
 * End Part 2 Globals
 ********************/

#ifdef HAS_GUI

/* Create string in hex/oct/binary format with leading zeros */
/* bpd denotes bits per digit  Should be in range 1-4,
   pbw denotes bits per word.*/
void wstring(unsigned x, int bpd, int bpw, char *str)
{
    int digit;
    unsigned mask = (1 << bpd) - 1;
    for (digit = (bpw-1)/bpd; digit >= 0; digit--) {
	unsigned val = (x >> (digit * bpd)) & mask;
	*str++ = digits[val];
    }
    *str = '\0';
}

/* used for formatting instructions */
static char status_msg[128];

/* SEQ+ */
static char *format_prev()
{
    char istring[9];
    char mstring[9];
    char pstring[9];
    wstring(prev_valc, 4, 32, istring);
    wstring(prev_valm, 4, 32, mstring);
    wstring(prev_valp, 4, 32, pstring);
    sprintf(status_msg, "%c %s %s %s %s",
	    prev_bcond ? 'Y' : 'N',
	    iname(HPACK(prev_icode, prev_ifun)),
	    istring, mstring, pstring);

    return status_msg;
}

static char *format_pc()
{
    char pstring[9];
    wstring(pc, 4, 32, pstring);
    sprintf(status_msg, "%s", pstring);
    return status_msg;
}

static char *format_f()
{
    char valcstring[9];
    char valpstring[9];
    wstring(valc, 4, 32, valcstring);
    wstring(valp, 4, 32, valpstring);
    sprintf(status_msg, "%s %s %s %s %s", 
	    iname(HPACK(icode, ifun)),
	    reg_name(ra),
	    reg_name(rb),
	    valcstring,
	    valpstring);
    return status_msg;
}

static char *format_d()
{
    char valastring[9];
    char valbstring[9];
    wstring(vala, 4, 32, valastring);
    wstring(valb, 4, 32, valbstring);
    sprintf(status_msg, "%s %s %s %s %s %s",
	    valastring,
	    valbstring,
	    reg_name(destE),
	    reg_name(destM),
	    reg_name(srcA),
	    reg_name(srcB));

    return status_msg;
}

static char *format_e()
{
    char valestring[9];
    wstring(vale, 4, 32, valestring);
    sprintf(status_msg, "%c %s",
	    bcond ? 'Y' : 'N',
	    valestring);
    return status_msg;
}

static char *format_m()
{
    char valmstring[9];
    wstring(valm, 4, 32, valmstring);
    sprintf(status_msg, "%s", valmstring);
    return status_msg;
}

static char *format_npc()
{
    char npcstring[9];
    wstring(pc_in, 4, 32, npcstring);
    sprintf(status_msg, "%s", npcstring);
    return status_msg;
}
#endif /* HAS_GUI */

/* Report system state */
static void sim_report() {

#ifdef HAS_GUI
    if (gui_mode) {
	report_pc(pc);
	if (plusmode) {
	    report_state("PREV", format_prev());
	    report_state("PC", format_pc());
	} else {
	    report_state("OPC", format_pc());
	}
	report_state("F", format_f());
	report_state("D", format_d());
	report_state("E", format_e());
	report_state("M", format_m());
	if (!plusmode) {
	    report_state("NPC", format_npc());
	}
	show_cc(cc);
    }
#endif /* HAS_GUI */

}

static int initialized = 0;
void sim_init()
{

    /* Create memory and register files */
    initialized = 1;
    mem = init_mem(MEM_SIZE);
    reg = init_reg();
    sim_reset();
    clear_mem(mem);
}

void sim_reset()
{
    if (!initialized)
	sim_init();
    clear_mem(reg);
    minAddr = 0;
    memCnt = 0;

#ifdef HAS_GUI
    if (gui_mode) {
	signal_register_clear();
	create_memory_display(minAddr, memCnt);
	sim_report();
    }
#endif

    if (plusmode) {
	prev_icode = prev_icode_in = I_NOP;
	prev_ifun = prev_ifun_in = 0;
	prev_valc = prev_valc_in = 0;
	prev_valm = prev_valm_in = 0;
	prev_valp = prev_valp_in = 0;
	prev_bcond = prev_bcond_in = FALSE;
	pc = 0;
    } else {
	pc_in = 0;
    }
    cc = DEFAULT_CC;
    cc_in = DEFAULT_CC;
    destE = REG_NONE;
    destM = REG_NONE;
    mem_write = FALSE;
    mem_addr = 0;
    mem_data = 0;

    /* Reset intermediate values to clear display */
    icode = I_NOP;
    ifun = 0;
    instr = HPACK(I_NOP, F_NONE);
    ra = REG_NONE;
    rb = REG_NONE;
    valc = 0;
    valp = 0;

    srcA = REG_NONE;
    srcB = REG_NONE;
    destE = REG_NONE;
    destM = REG_NONE;
    vala = 0;
    valb = 0;
    vale = 0;

    cond = FALSE;
    bcond = FALSE;
    valm = 0;

    sim_report();
}

/* Update the processor state */
static void update_state()
{
    if (plusmode) {
	prev_icode = prev_icode_in;
	prev_ifun  = prev_ifun_in;
	prev_valc  = prev_valc_in;
	prev_valm  = prev_valm_in;
	prev_valp  = prev_valp_in;
	prev_bcond = prev_bcond_in;
    } else {
	pc = pc_in;
    }
    cc = cc_in;
    /* Writeback */
    if (destE != REG_NONE)
	set_reg_val(reg, destE, vale);
    if (destM != REG_NONE)
	set_reg_val(reg, destM, valm);

    if (mem_write) {
      /* Should have already tested this address */
      set_word_val(mem, mem_addr, mem_data);
	sim_log("Wrote 0x%x to address 0x%x\n", mem_data, mem_addr);
#ifdef HAS_GUI
	    if (gui_mode) {
		if (mem_addr % 4 != 0) {
		    /* Just did a misaligned write.
		       Need to display both words */
		    word_t align_addr = mem_addr & ~0x3;
		    word_t val;
		    get_word_val(mem, align_addr, &val);
		    set_memory(align_addr, val);
		    align_addr+=4;
		    get_word_val(mem, align_addr, &val);
		    set_memory(align_addr, val);
		} else {
		    set_memory(mem_addr, mem_data);
		}
	    }
#endif /* HAS_GUI */
    }
}

/* Execute one instruction */
/* Return resulting status */
static byte_t sim_step()
{
    word_t aluA;
    word_t aluB;
    word_t alufun;

    status = STAT_AOK;
    imem_error = dmem_error = FALSE;

    update_state(); /* Update state from last cycle */

    if (plusmode) {
	pc = gen_pc();
    }
    valp = pc;
    instr = HPACK(I_NOP, F_NONE);
    imem_error = !get_byte_val(mem, valp, &instr);
    if (imem_error) {
	sim_log("Couldn't fetch at address 0x%x\n", valp);
    }
    imem_icode = HI4(instr);
    imem_ifun = LO4(instr);
    icode = gen_icode();
    ifun  = gen_ifun();
    instr_valid = gen_instr_valid();
    valp++;
    if (gen_need_regids()) {
	byte_t regids;
	if (get_byte_val(mem, valp, &regids)) {
	    ra = GET_RA(regids);
	    rb = GET_RB(regids);
	} else {
	    ra = REG_NONE;
	    rb = REG_NONE;
	    status = STAT_ADR;
	    sim_log("Couldn't fetch at address 0x%x\n", valp);
	}
	valp++;
    } else {
	ra = REG_NONE;
	rb = REG_NONE;
    }

    if (gen_need_valC()) {
	if (get_word_val(mem, valp, &valc)) {
	} else {
	    valc = 0;
	    status = STAT_ADR;
	    sim_log("Couldn't fetch at address 0x%x\n", valp);
	}
	valp+=4;
    } else {
	valc = 0;
    }
    sim_log("IF: Fetched %s at 0x%x.  ra=%s, rb=%s, valC = 0x%x\n",
	    iname(HPACK(icode,ifun)), pc, reg_name(ra), reg_name(rb), valc);

    if (status == STAT_AOK && icode == I_HALT) {
	status = STAT_HLT;
    }
    
    srcA = gen_srcA();
    if (srcA != REG_NONE) {
	vala = get_reg_val(reg, srcA);
    } else {
	vala = 0;
    }
    
    srcB = gen_srcB();
    if (srcB != REG_NONE) {
	valb = get_reg_val(reg, srcB);
    } else {
	valb = 0;
    }

    cond = cond_holds(cc, ifun);

    destE = gen_dstE();
    destM = gen_dstM();

    aluA = gen_aluA();
    aluB = gen_aluB();
    alufun = gen_alufun();
    vale = compute_alu(alufun, aluA, aluB);
    cc_in = cc;
    if (gen_set_cc())
	cc_in = compute_cc(alufun, aluA, aluB);

    bcond =  cond && (icode == I_JMP);

    mem_addr = gen_mem_addr();
    mem_data = gen_mem_data();


    if (gen_mem_read()) {
      dmem_error = dmem_error || !get_word_val(mem, mem_addr, &valm);
      if (dmem_error) {
	sim_log("Couldn't read at address 0x%x\n", mem_addr);
      }
    } else
      valm = 0;

    mem_write = gen_mem_write();
    if (mem_write) {
      /* Do a test read of the data memory to make sure address is OK */
      word_t junk;
      dmem_error = dmem_error || !get_word_val(mem, mem_addr, &junk);
    }

    status = gen_Stat();

    if (plusmode) {
	prev_icode_in = icode;
	prev_ifun_in = ifun;
	prev_valc_in = valc;
	prev_valm_in = valm;
	prev_valp_in = valp;
	prev_bcond_in = bcond;
    } else {
	/* Update PC */
	pc_in = gen_new_pc();
    } 
    sim_report();
    return status;
}

/*
  Run processor until one of following occurs:
  - An error status is encountered in WB.
  - max_instr instructions have completed through WB

  Return number of instructions executed.
  if statusp nonnull, then will be set to status of final instruction
  if ccp nonnull, then will be set to condition codes of final instruction
*/
int sim_run(int max_instr, byte_t *statusp, cc_t *ccp)
{
    int icount = 0;
    byte_t run_status = STAT_AOK;
    while (icount < max_instr) {
	run_status = sim_step();
	icount++;
	if (run_status != STAT_AOK)
	    break;
    }
    if (statusp)
	*statusp = run_status;
    if (ccp)
	*ccp = cc;
    return icount;
}

/* If dumpfile set nonNULL, lots of status info printed out */
void sim_set_dumpfile(FILE *df)
{
    dumpfile = df;
}

/*
 * sim_log dumps a formatted string to the dumpfile, if it exists
 * accepts variable argument list
 */
void sim_log( const char *format, ... ) {
    if (dumpfile) {
	va_list arg;
	va_start( arg, format );
	vfprintf( dumpfile, format, arg );
	va_end( arg );
    }
}


/*************************************************************
 * Part 3: This part contains simulation control for the TK
 * simulator. 
 *************************************************************/

#ifdef HAS_GUI

/**********************
 * Begin Part 3 globals	
 **********************/

/* Hack for SunOS */
extern int matherr();
int *tclDummyMathPtr = (int *) matherr;

static char tcl_msg[256];

/* Keep track of the TCL Interpreter */
static Tcl_Interp *sim_interp = NULL;

static mem_t post_load_mem;

/**********************
 * End Part 3 globals	
 **********************/


/* function prototypes */
int simResetCmd(ClientData clientData, Tcl_Interp *interp,
		int argc, char *argv[]);
int simLoadCodeCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[]);
int simLoadDataCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[]);
int simRunCmd(ClientData clientData, Tcl_Interp *interp,
	      int argc, char *argv[]);
void addAppCommands(Tcl_Interp *interp);

/******************************************************************************
 *	tcl command definitions
 ******************************************************************************/

/* Implement command versions of the simulation functions */
int simResetCmd(ClientData clientData, Tcl_Interp *interp,
		int argc, char *argv[])
{
    sim_interp = interp;
    if (argc != 1) {
	interp->result = "No arguments allowed";
	return TCL_ERROR;
    }
    sim_reset();
    if (post_load_mem) {
	free_mem(mem);
	mem = copy_mem(post_load_mem);
    }
    interp->result = stat_name(STAT_AOK);
    return TCL_OK;
}

int simLoadCodeCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[])
{
    FILE *object_file;
    int code_count;
    sim_interp = interp;
    if (argc != 2) {
	interp->result = "One argument required";
	return TCL_ERROR;
    }
    object_file = fopen(argv[1], "r");
    if (!object_file) {
	sprintf(tcl_msg, "Couldn't open code file '%s'", argv[1]);
	interp->result = tcl_msg;
	return TCL_ERROR;
    }
    sim_reset();
    code_count = load_mem(mem, object_file, 0);
    post_load_mem = copy_mem(mem);
    sprintf(tcl_msg, "%d", code_count);
    interp->result = tcl_msg;
    fclose(object_file);
    return TCL_OK;
}

int simLoadDataCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[])
{
    FILE *data_file;
    int word_count = 0;
    interp->result = "Not implemented";
    return TCL_ERROR;


    sim_interp = interp;
    if (argc != 2) {
	interp->result = "One argument required";
	return TCL_ERROR;
    }
    data_file = fopen(argv[1], "r");
    if (!data_file) {
	sprintf(tcl_msg, "Couldn't open data file '%s'", argv[1]);
	interp->result = tcl_msg;
	return TCL_ERROR;
    }
    sprintf(tcl_msg, "%d", word_count);
    interp->result = tcl_msg;
    fclose(data_file);
    return TCL_OK;
}


int simRunCmd(ClientData clientData, Tcl_Interp *interp,
	      int argc, char *argv[])
{
    int step_limit = 1;
    byte_t run_status;
    cc_t cc;
    sim_interp = interp;
    if (argc > 2) {
	interp->result = "At most one argument allowed";
	return TCL_ERROR;
    }
    if (argc >= 2 &&
	(sscanf(argv[1], "%d", &step_limit) != 1 ||
	 step_limit < 0)) {
	sprintf(tcl_msg, "Cannot run for '%s' cycles!", argv[1]);
	interp->result = tcl_msg;
	return TCL_ERROR;
    }
    sim_run(step_limit, &run_status, &cc);
    interp->result = stat_name(run_status);
    return TCL_OK;
}

/******************************************************************************
 *	registering the commands with tcl
 ******************************************************************************/

void addAppCommands(Tcl_Interp *interp)
{
    sim_interp = interp;
    Tcl_CreateCommand(interp, "simReset", (Tcl_CmdProc *) simResetCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateCommand(interp, "simCode", (Tcl_CmdProc *) simLoadCodeCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateCommand(interp, "simData", (Tcl_CmdProc *) simLoadDataCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateCommand(interp, "simRun", (Tcl_CmdProc *) simRunCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
} 

/******************************************************************************
 *	tcl functionality called from within C
 ******************************************************************************/

/* Provide mechanism for simulator to update register display */
void signal_register_update(reg_id_t r, word_t val) {
    int code;
    sprintf(tcl_msg, "setReg %d %d 1", (int) r, (int) val);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to signal register set\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Provide mechanism for simulator to generate memory display */
void create_memory_display() {
    int code;
    sprintf(tcl_msg, "createMem %d %d", minAddr, memCnt);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Command '%s' failed\n", tcl_msg);
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    } else {
	int i;
	for (i = 0; i < memCnt && code == TCL_OK; i+=4) {
	    int addr = minAddr+i;
	    int val;
	    if (!get_word_val(mem, addr, &val)) {
		fprintf(stderr, "Out of bounds memory display\n");
		return;
	    }
	    sprintf(tcl_msg, "setMem %d %d", addr, val);
	    code = Tcl_Eval(sim_interp, tcl_msg);
	}
	if (code != TCL_OK) {
	    fprintf(stderr, "Couldn't set memory value\n");
	    fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
	}
    }
}

/* Provide mechanism for simulator to update memory value */
void set_memory(int addr, int val) {
    int code;
    int nminAddr = minAddr;
    int nmemCnt = memCnt;

    /* First see if we need to expand memory range */
    if (memCnt == 0) {
	nminAddr = addr;
	memCnt = 4;
    } else if (addr < minAddr) {
	nminAddr = addr;
	nmemCnt = minAddr + memCnt - addr;
    } else if (addr >= minAddr+memCnt) {
	nmemCnt = addr-minAddr+4;
    }
    /* Now make sure nminAddr & nmemCnt are multiples of 16 */
    nmemCnt = ((nminAddr & 0xF) + nmemCnt + 0xF) & ~0xF;
    nminAddr = nminAddr & ~0xF;

    if (nminAddr != minAddr || nmemCnt != memCnt) {
	minAddr = nminAddr;
	memCnt = nmemCnt;
	create_memory_display();
    } else {
	sprintf(tcl_msg, "setMem %d %d", addr, val);
	code = Tcl_Eval(sim_interp, tcl_msg);
	if (code != TCL_OK) {
	    fprintf(stderr, "Couldn't set memory value 0x%x to 0x%x\n",
		    addr, val);
	    fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
	}
    }
}

/* Provide mechanism for simulator to update condition code display */
void show_cc(cc_t cc)
{
    int code;
    sprintf(tcl_msg, "setCC %d %d %d",
	    GET_ZF(cc), GET_SF(cc), GET_OF(cc));
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to display condition codes\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Provide mechanism for simulator to clear register display */
void signal_register_clear() {
    int code;
    code = Tcl_Eval(sim_interp, "clearReg");
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to signal register clear\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Provide mechanism for simulator to report instructions as they are 
   read in
*/

void report_line(int line_no, int addr, char *hex, char *text) {
    int code;
    sprintf(tcl_msg, "addCodeLine %d %d {%s} {%s}", line_no, addr, hex, text);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to report code line 0x%x\n", addr);
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}


/* Provide mechanism for simulator to report which instruction
   is being executed */
void report_pc(unsigned pc)
{
    int t_status;
    char addr[10];
    char code[12];
    Tcl_DString cmd;
    Tcl_DStringInit(&cmd);
    Tcl_DStringAppend(&cmd, "simLabel ", -1);
    Tcl_DStringStartSublist(&cmd);
    sprintf(addr, "%u", pc);
    Tcl_DStringAppendElement(&cmd, addr);

    Tcl_DStringEndSublist(&cmd);
    Tcl_DStringStartSublist(&cmd);
    sprintf(code, "%s","*");
    Tcl_DStringAppend(&cmd, code, -1);
    Tcl_DStringEndSublist(&cmd);
    t_status = Tcl_Eval(sim_interp, Tcl_DStringValue(&cmd));
    if (t_status != TCL_OK) {
	fprintf(stderr, "Failed to report code '%s'\n", code);
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Report single line of stage state */
void report_state(char *id, char *txt)
{
    int t_status;
    sprintf(tcl_msg, "updateStage %s {%s}", id, txt);
    t_status = Tcl_Eval(sim_interp, tcl_msg);
    if (t_status != TCL_OK) {
	fprintf(stderr, "Failed to report processor status\n");
	fprintf(stderr, "\tStage %s, status '%s'\n",
		id, txt);
	fprintf(stderr, "\tError Message was '%s'\n", sim_interp->result);
    }
}

/*
 * Tcl_AppInit - Called by TCL to perform application-specific initialization.
 */
int Tcl_AppInit(Tcl_Interp *interp)
{
    /* Tell TCL about the name of the simulator so it can  */
    /* use it as the title of the main window */
    Tcl_SetVar(interp, "simname", simname, TCL_GLOBAL_ONLY);

    if (Tcl_Init(interp) == TCL_ERROR)
	return TCL_ERROR;
    if (Tk_Init(interp) == TCL_ERROR)
	return TCL_ERROR;
    Tcl_StaticPackage(interp, "Tk", Tk_Init, Tk_SafeInit);

    /* Call procedure to add new commands */
    addAppCommands(interp);

    /*
     * Specify a user-specific startup file to invoke if the application
     * is run interactively.  Typically the startup file is "~/.apprc"
     * where "app" is the name of the application.  If this line is deleted
     * then no user-specific startup file will be run under any conditions.
     */
    Tcl_SetVar(interp, "tcl_rcFileName", "~/.wishrc", TCL_GLOBAL_ONLY);
    return TCL_OK;

}

 
#endif /* HAS_GUI */
sim/seq/sim.h0000700005644400000240000000472011165406253011703 0ustar  tmsgrad/********** Defines **************/

/* Get ra out of one byte regid field */
#define GET_RA(r) HI4(r)

/* Get rb out of one byte regid field */
#define GET_RB(r) LO4(r)


/************ Global state declaration ****************/

/* Determines whether running SEQ or SEQ+ */
extern int plusmode;

/* Both instruction and data memory */
extern mem_t mem;

/* Keep track of range of addresses that have been written */
extern int minAddr;
extern int memCnt;

/* Register file */
extern mem_t reg;
/* Condition code register */
extern cc_t cc;
/* Program counter */
extern word_t pc;

/* For seq+ */
/* Results computed by previous instruction.
   Used to compute PC in current instruction */
extern byte_t prev_icode;
extern byte_t prev_ifun;
extern word_t prev_valc;
extern word_t prev_valm;
extern word_t prev_valp;
extern bool_t prev_bcond;

/* Intermdiate stage values that must be used by control functions */
extern byte_t imem_icode;
extern byte_t imem_ifun;
extern byte_t icode;
extern word_t ifun;
extern word_t ra;
extern word_t rb;
extern word_t valc;
extern word_t valp;
extern bool_t imem_error;
extern bool_t instr_valid;
extern word_t vala;
extern word_t valb;
extern word_t vale;
extern bool_t bcond;
extern bool_t cond;
extern word_t valm;
extern bool_t dmem_error;
extern byte_t status;

/* Log file */
extern FILE *dumpfile;


/* Sets the simulator name (called from main routine in HCL file) */
void set_simname(char *name);

/* Initialize simulator */
void sim_init();

/* Reset simulator state, including register, instruction, and data memories */
void sim_reset();

/*
  Run processor until one of following occurs:
  - An status error is encountered
  - max_instr instructions have completed

  Return number of instructions executed.
  if statusp nonnull, then will be set to status of final instruction
  if ccp nonnull, then will be set to condition codes of final instruction
*/
int sim_run(int max_instr, byte_t *statusp, cc_t *ccp);

/* If dumpfile set nonNULL, lots of status info printed out */
void sim_set_dumpfile(FILE *file);

/*
 * sim_log dumps a formatted string to the dumpfile, if it exists
 * accepts variable argument list
 */
void sim_log( const char *format, ... );


/******************* GUI Interface Functions **********************/
#ifdef HAS_GUI

void signal_register_clear();

void report_pc(unsigned pc);

void report_state(char *id, char *txt);

void show_cc(cc_t cc);

void create_memory_display();
void set_memory(int addr, int val);
#endif
								       
sim/seq/seq+.tcl0000700005644400000240000003673211336066004012315 0ustar  tmsgrad##########################################################################
# Parsing of command line flags                                          #
##########################################################################

proc flagVal {flag default} {
    global argv
    foreach t $argv {
	if {[string match "-$flag*" $t]} {return [string range $t 2 end]}
    }
    return $default
}

proc findFlag {flag} {
    global argv
    foreach t $argv {
	if {[string match "-$flag" $t]} {return 1}
    }
    return 0
}

##########################################################################
# Register File Implementation.  Shown as array of 8 columns             #
##########################################################################


# Font used to display register contents
set fontSize [expr 10 * [flagVal "f" 12]]
set codeFontSize [expr 10 * [flagVal "c" 10]]
set labFontSize [expr 10 * [flagVal "l" 10]]
set bigFontSize [expr 10 * [flagVal "b" 16]]
set dpyFont "*-courier-medium-r-normal--*-$fontSize-*-*-*-*-*-*"
set labFont "*-helvetica-medium-r-normal--*-$labFontSize-*-*-*-*-*-*"
set bigLabFont "*-helvetica-bold-r-normal--*-$bigFontSize-*-*-*-*-*-*"
set codeFont "*-courier-medium-r-normal--*-$codeFontSize-*-*-*-*-*-*"
# Background Color of normal register
set normalBg white
# Background Color of highlighted register
set specialBg LightSkyBlue

# Height of titles separating major sections of control panel
set sectionHeight 2


# How many rows of code do I display
set codeRowCount [flagVal "r" 50]

# Keep track of previous highlighted register
set lastId -1
proc setReg {id val highlight} {
    global lastId normalBg specialBg
    if {$lastId >= 0} {
	.r.reg$lastId config -bg $normalBg
	set lastId -1
    }
    if {$id < 0 || $id >= 8} {
	error "Invalid Register ($id)"
    }
    .r.reg$id config -text [format %8x $val]
    if {$highlight} {
	uplevel .r.reg$id config -bg $specialBg
	set lastId $id
    }
}

# Clear all registers
proc clearReg {} {
    global lastId normalBg
    if {$lastId >= 0} {
	.r.reg$lastId config -bg $normalBg
	set lastId -1
    } 
    for {set i 0} {$i < 8} {incr i 1} {
	.r.reg$i config -text ""
    }
}

# Set all 3 condition codes
proc setCC {zv cv ov} {
    .cc.cc0 config -text [format %d $zv]
    .cc.cc1 config -text [format %d $cv]
    .cc.cc2 config -text [format %d $ov]
}


### Create display for misc. state
frame .flags
pack .flags -in . -side bottom

##############################################################################
# Status Display                                                             #
##############################################################################

set simStat "AOK"
# Line to display simulation status
frame .stat
pack .stat -in .flags -side left
label .stat.statlab -width 7 -text "Stat" -height $sectionHeight -font $bigLabFont 
label .stat.statdpy -width 3 -font $dpyFont -relief ridge -bg white -textvariable simStat
label .stat.fill -width 6 -text ""
pack .stat.statlab .stat.statdpy .stat.fill  -in .stat -side left
##############################################################################
# Condition Code Display                                                     #
##############################################################################
# Create Window for condition codes
frame .cc
pack .cc -in .flags -side right

label .cc.lab -text "Condition Codes" -height $sectionHeight -font $bigLabFont 
pack .cc.lab -in .cc -side left


set ccnames [list "Z" "S" "O"]

# Create Row of CC Labels
for {set i 0} {$i < 3} {incr i 1} {
    label .cc.lab$i -width 1 -font $dpyFont -text [lindex $ccnames $i]
    pack .cc.lab$i -in .cc -side left
    label .cc.cc$i -width 1 -font $dpyFont -relief ridge -bg $normalBg
    pack .cc.cc$i -in .cc -side left
}

##############################################################################
# Register Display                                                           #     
##############################################################################


# Create Window for registers
frame .r
pack .r -in . -side bottom
# Following give separate window for register file
# toplevel .r
# wm title .r "Register File" -height $sectionHeight -font $bigLabFont
label .r.lab -text "Register File" -font $bigLabFont
pack .r.lab -in .r -side top
# Set up top row control panel (disabled)
# frame .r.cntl
# pack .r.cntl -fill x -in .r
# label .r.labreg -text "Register" -width 10
# entry .r.regid -width 3 -relief sunken -textvariable regId -font $dpyFont
# label .r.labval -text "Value" -width 10
# entry .r.regval -width 8 -relief sunken -textvariable regVal -font $dpyFont
# button .r.doset -text "Set" -command {setReg $regId $regVal 1} -width 6
# button .r.c -text "Clear" -command clearReg -width 6
# pack .r.labreg .r.regid .r.labval .r.regval .r.doset .r.c  -in .r.cntl -side left

set regnames [list "%eax" "%ecx" "%edx" "%ebx" "%esp" "%ebp" "%esi" "%edi"]

# Create Row of Register Labels
frame .r.labels
pack .r.labels -side top -in .r

for {set i 0} {$i < 8} {incr i 1} {
    label .r.lab$i -width 8 -font $dpyFont -text [lindex $regnames $i]
    pack .r.lab$i -in .r.labels -side left
}

# Create Row of Register Entries
frame .r.row
pack .r.row -side top -in .r


# Create 8 registers
for {set i 0} {$i < 8} {incr i 1} {
    label .r.reg$i -width 8 -font $dpyFont -relief ridge \
	    -bg $normalBg
    pack .r.reg$i -in .r.row -side left
}


##############################################################################
#  Main Control Panel                                                        #
##############################################################################
#
# Set the simulator name (defined in simname in ssim.c) 
# as the title of the main window
#
wm title . $simname
#wm title . "Y86 Simulator"

# Control Panel for simulator
set cntlBW 9
frame .cntl
pack .cntl
button .cntl.quit -width $cntlBW -text Quit -command exit
button .cntl.run -width $cntlBW -text Go -command simGo
button .cntl.stop -width $cntlBW -text Stop -command simStop
button .cntl.step -width $cntlBW -text Step -command simStep
button .cntl.reset -width $cntlBW -text Reset -command simResetAll
pack .cntl.quit .cntl.run .cntl.stop .cntl.step .cntl.reset -in .cntl -side left
# Simulation speed control
scale .spd -label {Simulator Speed (10*log Hz)} -from -10 -to 30 -length 10c \
  -orient horizontal -command setSpeed
pack .spd

# Simulation mode 
set simMode forward

# frame .md
# pack .md
# radiobutton .md.wedged -text Wedged -variable simMode \
# 	-value wedged -width 10 -command {setSimMode wedged}
# radiobutton .md.stall -text Stall -variable simMode \
# 	-value stall -width 10 -command {setSimMode stall}
# radiobutton .md.forward -text Forward -variable simMode \
# 	-value forward -width 10 -command {setSimMode forward}
# pack .md.wedged .md.stall .md.forward -in .md -side left

# simDelay defines #milliseconds for each cycle of simulator
# Initial value is 1000ms
set simDelay 1000
# Set delay based on rate expressed in log(Hz)
proc setSpeed {rate} {
  global simDelay
  set simDelay [expr round(1000 / pow(10,$rate/10.0))]
}

# Global variables controlling simulator execution
# Should simulator be running now?
set simGoOK 0

proc simStop  {} {
  global simGoOK
  set simGoOK 0
}

proc simStep {} {
    global simStat
    set simStat [simRun 1]
}

proc simGo {} {
    global simGoOK simDelay simStat
    set simGoOK 1
    # Disable the Go and Step buttons
    # Enable the Stop button
    while {$simGoOK} {
	# run the simulator 1 cycle
	after $simDelay
	set simStat [simRun 1]
	if {$simStat != "AOK" && $simStat != "BUB"} {set simGoOK 0}
	update
    }
    # Disable the Stop button
    # Enable the Go and Step buttons
}

##############################################################################
#  Processor State display                                                   #
##############################################################################

# Overall width of pipe register display
set procWidth 40
set procHeight 1
set labWidth 8

# Add labeled display to window 
proc addDisp {win width name} {
    global dpyFont labFont
    set lname [string tolower $name]
    frame $win.$lname
    pack $win.$lname -in $win -side left
    label $win.$lname.t -text $name -font $labFont
    label $win.$lname.c -width $width -font $dpyFont -bg white -relief ridge
    pack $win.$lname.t $win.$lname.c -in $win.$lname -side top
    return [list $win.$lname.c]
}

# Set text in display row
proc setDisp {wins txts} {
    for {set i 0} {$i < [llength $wins] && $i < [llength $txts]} {incr i} {
	set win [lindex $wins $i]
	set txt [lindex $txts $i]
	$win config -text $txt
    }
}

frame .p -width $procWidth 
pack .p -in . -side bottom
label .p.lab -text "Processor State" -height $sectionHeight -font $bigLabFont 
pack .p.lab -in .p -side top
label .p.mem -text "Memory Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.ex -text "Execute Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.id -text "Decode Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.if -text "Fetch Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.pcc -text "PC Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
# Mem
frame .p.m
# Execute
frame .p.e
# Decode
frame .p.d
# Fetch
frame .p.f
# PC
frame .p.pc
# Prev
frame .p.prev
pack .p.m .p.mem .p.e .p.ex .p.d .p.id .p.f .p.if .p.pc .p.pcc .p.prev -in .p -side top -anchor w -expand 1

# Take list of lists, and transpose nesting
# Assumes all lists are of same length
proc ltranspose {inlist} {
    set result {}
    for {set i 0} {$i < [llength [lindex $inlist 0]]} {incr i} {
	set nlist {}
	for {set j 0} {$j < [llength $inlist]} {incr j} {
	    set ele [lindex [lindex $inlist $j] $i]
	    set nlist [concat $nlist [list $ele]]
	}
	set result [concat $result [list $nlist]]
    }
    return $result
}

# Fields in PREV display
# Total size =
set pwins(PREV) [ltranspose \
	[list [addDisp .p.prev 3 pCnd] \
              [addDisp .p.prev 6 pInstr] \
	      [addDisp .p.prev 8 pValC] \
	      [addDisp .p.prev 8 pValM] \
	      [addDisp .p.prev 8 pValP]]] 


# Fields in PC display
# Total size = 8 
set pwins(PC) [ltranspose [list [addDisp .p.pc 8 PC]]]

# Fetch display
# Total size = 6+8+4+4+8 = 30
set pwins(F) [ltranspose \
           [list [addDisp .p.f 6 Instr] \
	         [addDisp .p.f 4 rA]\
	         [addDisp .p.f 4 rB] \
                 [addDisp .p.f 8 valC] \
		 [addDisp .p.f 8 valP]]] 

# Decode Display
# Total size = 4+8+4+8+4+4 = 32
set pwins(D) [ltranspose \
           [list [addDisp .p.d 8 valA] \
		 [addDisp .p.d 8 valB] \
		 [addDisp .p.d 4 dstE] \
		 [addDisp .p.d 4 dstM] \
                 [addDisp .p.d 4 srcA] \
		 [addDisp .p.d 4 srcB]]]

# Execute Display
# Total size = 1+8 = 9
set pwins(E) [ltranspose \
           [list [addDisp .p.e 3 Cnd] \
		 [addDisp .p.e 8 valE]]]

# Memory Display
# Total size = 8
set pwins(M) [ltranspose \
           [list [addDisp .p.m 8 valM]]]

# update status line for specified proc register
proc updateStage {name txts} {
    set Name [string toupper $name]
    global pwins
    set wins [lindex $pwins($Name) 0]
    setDisp $wins $txts
}   

##########################################################################
#                    Instruction Display                                 #
##########################################################################

toplevel .c
wm title .c "Program Code"
frame .c.cntl 
pack .c.cntl -in .c -side top -anchor w
label .c.filelab -width 10 -text "File"
entry .c.filename -width 20 -relief sunken -textvariable codeFile \
	-font $dpyFont -bg white
button .c.loadbutton -width $cntlBW -command {loadCode $codeFile} -text Load
pack .c.filelab .c.filename .c.loadbutton -in .c.cntl -side left

proc clearCode {} {
    simLabel {} {}
    destroy .c.t
    destroy .c.tr
}

proc createCode {} {
    # Create Code Structure
    frame .c.t
    pack .c.t -in .c -side top -anchor w
    frame .c.tr
    pack .c.tr -in .c.t -side top -anchor nw
}

proc loadCode {file} {
    # Kill old code window
    clearCode
    # Create new one
    createCode
    simCode $file
    simResetAll
}

# Start with initial code window, even though it will be destroyed.
createCode

# Add a line of code to the display
proc addCodeLine {line addr op text} {
    global codeRowCount
    # Create new line in display
    global codeFont
    frame .c.tr.$addr
    pack .c.tr.$addr -in .c.tr -side top -anchor w
    label .c.tr.$addr.a -width 5 -text [format "0x%x" $addr] -font $codeFont
    label .c.tr.$addr.i -width 12 -text $op -font $codeFont 
    label .c.tr.$addr.s -width 2 -text "" -font $codeFont -bg white
    label .c.tr.$addr.t -text $text -font $codeFont
    pack .c.tr.$addr.a .c.tr.$addr.i .c.tr.$addr.s \
	    .c.tr.$addr.t -in .c.tr.$addr -side left
}

# Keep track of which instructions have stage labels

set oldAddr {}

proc simLabel {addrs labs} {
    global oldAddr
    set newAddr {}
    # Clear away any old labels
    foreach a $oldAddr {
	.c.tr.$a.s config -text ""
    }
    for {set i 0} {$i < [llength $addrs]} {incr i} {
	set a [lindex $addrs $i]
	set t [lindex $labs $i]
	if {[winfo exists .c.tr.$a]} {
	    .c.tr.$a.s config -text $t
	    set newAddr [concat $newAddr $a]
	}
    }
    set oldAddr $newAddr
}

proc simResetAll {} {
    global simStat
    set simStat "AOK"
    simReset
    simLabel {} {}
    clearMem
}

###############################################################################
#    Memory Display                                                           #
###############################################################################
toplevel .m
wm title .m "Memory Contents"
frame .m.t
pack .m.t -in .m -side top -anchor w

label .m.t.lab -width 6 -font $dpyFont -text "      "
pack .m.t.lab -in .m.t -side left
for {set i 0} {$i < 16} {incr i 4} {
    label .m.t.a$i -width 8 -font $dpyFont -text [format "  0x---%x" [expr $i % 16]]
    pack .m.t.a$i -in .m.t -side left
}


# Keep track of range of addresses currently displayed
set minAddr 0
set memCnt  0
set haveMem 0

proc createMem {nminAddr nmemCnt} {
    global minAddr memCnt haveMem codeFont dpyFont normalBg
    set minAddr $nminAddr
    set memCnt $nmemCnt

    if { $haveMem } { destroy .m.e }

    # Create Memory Structure
    frame .m.e
    set haveMem 1
    pack .m.e -in .m -side top -anchor w
    # Now fill it with values
    for {set i 0} {$i < $memCnt} {incr i 16} {
	set addr [expr $minAddr + $i]

	frame .m.e.r$i
	pack .m.e.r$i -side bottom -in .m.e
	label .m.e.r$i.lab -width 6 -font $dpyFont -text [format "0x%.3x-"  [expr $addr / 16]]
	pack .m.e.r$i.lab -in .m.e.r$i -side left

	for {set j 0} {$j < 16} {incr j 4} {
	    set a [expr $addr + $j]
	    label .m.e.v$a -width 8 -font $dpyFont -relief ridge \
                -bg $normalBg
	    pack .m.e.v$a -in .m.e.r$i -side left
	}
    }
}

proc setMem {Addr Val} {
    global minAddr memCnt
    if {$Addr < $minAddr || $Addr > [expr $minAddr + $memCnt]} {
	error "Memory address $Addr out of range"
    }
    .m.e.v$Addr config -text [format %8x $Val]
}

proc clearMem {} {
    destroy .m.e
    createMem 0 0
}



###############################################################################
#    Command Line Initialization                                              #
###############################################################################

# Get code file name from input

# Find file with specified extension
proc findFile {tlist ext} {
    foreach t $tlist {
	if {[string match "*.$ext" $t]} {return $t}
    }
    return ""
}


set codeFile [findFile $argv yo]
if {$codeFile != ""} { loadCode $codeFile}
sim/seq/seq.tcl0000700005644400000240000003664311251746117012251 0ustar  tmsgrad
##########################################################################
# Parsing of command line flags                                          #
##########################################################################

proc flagVal {flag default} {
    global argv
    foreach t $argv {
	if {[string match "-$flag*" $t]} {return [string range $t 2 end]}
    }
    return $default
}

proc findFlag {flag} {
    global argv
    foreach t $argv {
	if {[string match "-$flag" $t]} {return 1}
    }
    return 0
}

##########################################################################
# Register File Implementation.  Shown as array of 8 columns             #
##########################################################################


# Font used to display register contents
set fontSize [expr 10 * [flagVal "f" 12]]
set codeFontSize [expr 10 * [flagVal "c" 10]]
set labFontSize [expr 10 * [flagVal "l" 10]]
set bigFontSize [expr 10 * [flagVal "b" 16]]
set dpyFont "*-courier-medium-r-normal--*-$fontSize-*-*-*-*-*-*"
set labFont "*-helvetica-medium-r-normal--*-$labFontSize-*-*-*-*-*-*"
set bigLabFont "*-helvetica-bold-r-normal--*-$bigFontSize-*-*-*-*-*-*"
set codeFont "*-courier-medium-r-normal--*-$codeFontSize-*-*-*-*-*-*"
# Background Color of normal register
set normalBg white
# Background Color of highlighted register
set specialBg LightSkyBlue

# Height of titles separating major sections of control panel
set sectionHeight 2

# How many rows of code do I display
set codeRowCount [flagVal "r" 50]

# Keep track of previous highlighted register
set lastId -1
proc setReg {id val highlight} {
    global lastId normalBg specialBg
    if {$lastId >= 0} {
	.r.reg$lastId config -bg $normalBg
	set lastId -1
    }
    if {$id < 0 || $id >= 8} {
	error "Invalid Register ($id)"
    }
    .r.reg$id config -text [format %8x $val]
    if {$highlight} {
	uplevel .r.reg$id config -bg $specialBg
	set lastId $id
    }
}

# Clear all registers
proc clearReg {} {
    global lastId normalBg
    if {$lastId >= 0} {
	.r.reg$lastId config -bg $normalBg
	set lastId -1
    } 
    for {set i 0} {$i < 8} {incr i 1} {
	.r.reg$i config -text ""
    }
}

# Set all 3 condition codes
proc setCC {zv cv ov} {
    .cc.cc0 config -text [format %d $zv]
    .cc.cc1 config -text [format %d $cv]
    .cc.cc2 config -text [format %d $ov]
}


### Create display for misc. state
frame .flags
pack .flags -in . -side bottom

##############################################################################
# Status Display                                                             #
##############################################################################

set simStat "AOK"
# Line to display simulation status
frame .stat
pack .stat -in .flags -side left
label .stat.statlab -width 7 -text "Stat" -font $bigLabFont -height $sectionHeight
label .stat.statdpy -width 3 -font $dpyFont -relief ridge -bg white -textvariable simStat
label .stat.fill -width 6 -text ""
pack .stat.statlab .stat.statdpy .stat.fill  -in .stat -side left
##############################################################################
# Condition Code Display                                                     #
##############################################################################
# Create Window for condition codes
frame .cc
pack .cc -in .flags -side right

label .cc.lab -text "Condition Codes" -font $bigLabFont -height $sectionHeight
pack .cc.lab -in .cc -side left


set ccnames [list "Z" "S" "O"]

# Create Row of CC Labels
for {set i 0} {$i < 3} {incr i 1} {
    label .cc.lab$i -width 1 -font $dpyFont -text [lindex $ccnames $i]
    pack .cc.lab$i -in .cc -side left
    label .cc.cc$i -width 1 -font $dpyFont -relief ridge -bg $normalBg
    pack .cc.cc$i -in .cc -side left
}

##############################################################################
# Register Display                                                           #     
##############################################################################


# Create Window for registers
frame .r
pack .r -in . -side bottom
# Following give separate window for register file
# toplevel .r
# wm title .r "Register File"
label .r.lab -text "Register File" -font $bigLabFont -height $sectionHeight
pack .r.lab -in .r -side top
# Set up top row control panel (disabled)
# frame .r.cntl
# pack .r.cntl -fill x -in .r
# label .r.labreg -text "Register" -width 10
# entry .r.regid -width 3 -relief sunken -textvariable regId -font $dpyFont
# label .r.labval -text "Value" -width 10
# entry .r.regval -width 8 -relief sunken -textvariable regVal -font $dpyFont
# button .r.doset -text "Set" -command {setReg $regId $regVal 1} -width 6
# button .r.c -text "Clear" -command clearReg -width 6
# pack .r.labreg .r.regid .r.labval .r.regval .r.doset .r.c  -in .r.cntl -side left

set regnames [list "%eax" "%ecx" "%edx" "%ebx" "%esp" "%ebp" "%esi" "%edi"]

# Create Row of Register Labels
frame .r.labels
pack .r.labels -side top -in .r

for {set i 0} {$i < 8} {incr i 1} {
    label .r.lab$i -width 8 -font $dpyFont -text [lindex $regnames $i]
    pack .r.lab$i -in .r.labels -side left
}

# Create Row of Register Entries
frame .r.row
pack .r.row -side top -in .r


# Create 8 registers
for {set i 0} {$i < 8} {incr i 1} {
    label .r.reg$i -width 8 -font $dpyFont -relief ridge \
	    -bg $normalBg
    pack .r.reg$i -in .r.row -side left
}


##############################################################################
#  Main Control Panel                                                        #
##############################################################################

#
# Set the simulator name (defined in simname in ssim.c) 
# as the title of the main window
#
wm title . $simname

# Control Panel for simulator
set cntlBW 9
frame .cntl
pack .cntl
button .cntl.quit -width $cntlBW -text Quit -command exit
button .cntl.run -width $cntlBW -text Go -command simGo
button .cntl.stop -width $cntlBW -text Stop -command simStop
button .cntl.step -width $cntlBW -text Step -command simStep
button .cntl.reset -width $cntlBW -text Reset -command simResetAll
pack .cntl.quit .cntl.run .cntl.stop .cntl.step .cntl.reset -in .cntl -side left
# Simulation speed control
scale .spd -label {Simulator Speed (10*log Hz)} -from -10 -to 30 -length 10c \
  -orient horizontal -command setSpeed
pack .spd

# Simulation mode 
set simMode forward

# frame .md
# pack .md
# radiobutton .md.wedged -text Wedged -variable simMode \
# 	-value wedged -width 10 -command {setSimMode wedged}
# radiobutton .md.stall -text Stall -variable simMode \
# 	-value stall -width 10 -command {setSimMode stall}
# radiobutton .md.forward -text Forward -variable simMode \
# 	-value forward -width 10 -command {setSimMode forward}
# pack .md.wedged .md.stall .md.forward -in .md -side left

# simDelay defines #milliseconds for each cycle of simulator
# Initial value is 1000ms
set simDelay 1000
# Set delay based on rate expressed in log(Hz)
proc setSpeed {rate} {
  global simDelay
  set simDelay [expr round(1000 / pow(10,$rate/10.0))]
}

# Global variables controlling simulator execution
# Should simulator be running now?
set simGoOK 0

proc simStop  {} {
  global simGoOK
  set simGoOK 0
}

proc simStep {} {
    global simStat
    set simStat [simRun 1]
}

proc simGo {} {
    global simGoOK simDelay simStat
    set simGoOK 1
    # Disable the Go and Step buttons
    # Enable the Stop button
    while {$simGoOK} {
	# run the simulator 1 cycle
	after $simDelay
	set simStat [simRun 1]
	if {$simStat != "AOK" && $simStat != "BUB"} {set simGoOK 0}
	update
    }
    # Disable the Stop button
    # Enable the Go and Step buttons
}

##############################################################################
#  Processor State display                                                   #
##############################################################################

# Overall width of pipe register display
set procWidth 40
set procHeight 1
set labWidth 8

# Add labeled display to window 
proc addDisp {win width name} {
    global dpyFont labFont
    set lname [string tolower $name]
    frame $win.$lname
    pack $win.$lname -in $win -side left
    label $win.$lname.t -text $name -font $labFont
    label $win.$lname.c -width $width -font $dpyFont -bg white -relief ridge
    pack $win.$lname.t $win.$lname.c -in $win.$lname -side top
    return [list $win.$lname.c]
}

# Set text in display row
proc setDisp {wins txts} {
    for {set i 0} {$i < [llength $wins] && $i < [llength $txts]} {incr i} {
	set win [lindex $wins $i]
	set txt [lindex $txts $i]
	$win config -text $txt
    }
}

frame .p -width $procWidth 
pack .p -in . -side bottom
label .p.lab -text "Processor State" -font $bigLabFont -height $sectionHeight
pack .p.lab -in .p -side top
label .p.pc -text "PC Update Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
#label .p.wb -text "Writeback Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.mem -text "Memory Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.ex -text "Execute Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.id -text "Decode Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
label .p.if -text "Fetch Stage" -height $procHeight -font $bigLabFont -width $procWidth -bg NavyBlue -fg White
# New PC
frame .p.npc
# Mem
frame .p.m
# Execute
frame .p.e
# Decode
frame .p.d
# Fetch
frame .p.f
# Old PC
frame .p.opc
pack .p.npc .p.pc .p.m .p.mem .p.e .p.ex .p.d .p.id .p.f .p.if .p.opc -in .p -side top -anchor w -expand 1

# Take list of lists, and transpose nesting
# Assumes all lists are of same length
proc ltranspose {inlist} {
    set result {}
    for {set i 0} {$i < [llength [lindex $inlist 0]]} {incr i} {
	set nlist {}
	for {set j 0} {$j < [llength $inlist]} {incr j} {
	    set ele [lindex [lindex $inlist $j] $i]
	    set nlist [concat $nlist [list $ele]]
	}
	set result [concat $result [list $nlist]]
    }
    return $result
}

# Fields in PC displayed
# Total size = 8 
set pwins(OPC) [ltranspose [list [addDisp .p.opc 8 PC]]]

# Fetch display
# Total size = 6+8+4+4+8 = 30
set pwins(F) [ltranspose \
           [list [addDisp .p.f 6 Instr] \
	         [addDisp .p.f 4 rA]\
	         [addDisp .p.f 4 rB] \
                 [addDisp .p.f 8 valC] \
		 [addDisp .p.f 8 valP]]] 

# Decode Display
# Total size = 4+8+4+8+4+4 = 32
set pwins(D) [ltranspose \
           [list \
		 [addDisp .p.d 8 valA] \
		 [addDisp .p.d 8 valB] \
		 [addDisp .p.d 4 dstE] \
		 [addDisp .p.d 4 dstM] \
                 [addDisp .p.d 4 srcA] \
		 [addDisp .p.d 4 srcB]]]




# Execute Display
# Total size = 3+8 = 11
set pwins(E) [ltranspose \
           [list [addDisp .p.e 3 Cnd] \
		 [addDisp .p.e 8 valE]]]

# Memory Display
# Total size = 8
set pwins(M) [ltranspose \
           [list [addDisp .p.m 8 valM]]]

# New PC Display
# Total Size = 8
set pwins(NPC) [ltranspose \
           [list [addDisp .p.npc 8 newPC]]]

# update status line for specified proc register
proc updateStage {name txts} {
    set Name [string toupper $name]
    global pwins
    set wins [lindex $pwins($Name) 0]
    setDisp $wins $txts
}   

##########################################################################
#                    Instruction Display                                 #
##########################################################################

toplevel .c
wm title .c "Program Code"
frame .c.cntl 
pack .c.cntl -in .c -side top -anchor w
label .c.filelab -width 10 -text "File"
entry .c.filename -width 20 -relief sunken -textvariable codeFile \
	-font $dpyFont -bg white
button .c.loadbutton -width $cntlBW -command {loadCode $codeFile} -text Load
pack .c.filelab .c.filename .c.loadbutton -in .c.cntl -side left

proc clearCode {} {
    simLabel {} {}
    destroy .c.t
    destroy .c.tr
}

proc createCode {} {
    # Create Code Structure
    frame .c.t
    pack .c.t -in .c -side top -anchor w
    frame .c.tr
    pack .c.tr -in .c.t -side top -anchor nw
}

proc loadCode {file} {
    # Kill old code window
    clearCode
    # Create new one
    createCode
    simCode $file
    simResetAll
}

# Start with initial code window, even though it will be destroyed.
createCode

# Add a line of code to the display
proc addCodeLine {line addr op text} {
    global codeRowCount
    # Create new line in display
    global codeFont
    frame .c.tr.$addr
    pack .c.tr.$addr -in .c.tr -side top -anchor w
    label .c.tr.$addr.a -width 5 -text [format "0x%x" $addr] -font $codeFont
    label .c.tr.$addr.i -width 12 -text $op -font $codeFont 
    label .c.tr.$addr.s -width 2 -text "" -font $codeFont -bg white
    label .c.tr.$addr.t -text $text -font $codeFont
    pack .c.tr.$addr.a .c.tr.$addr.i .c.tr.$addr.s \
	    .c.tr.$addr.t -in .c.tr.$addr -side left
}

# Keep track of which instructions have stage labels

set oldAddr {}

proc simLabel {addrs labs} {
    global oldAddr
    set newAddr {}
    # Clear away any old labels
    foreach a $oldAddr {
	.c.tr.$a.s config -text ""
    }
    for {set i 0} {$i < [llength $addrs]} {incr i} {
	set a [lindex $addrs $i]
	set t [lindex $labs $i]
	if {[winfo exists .c.tr.$a]} {
	    .c.tr.$a.s config -text $t
	    set newAddr [concat $newAddr $a]
	}
    }
    set oldAddr $newAddr
}

proc simResetAll {} {
    global simStat
    set simStat "AOK"
    simReset
    simLabel {} {}
    clearMem
}

###############################################################################
#    Memory Display                                                           #
###############################################################################
toplevel .m
wm title .m "Memory Contents"
frame .m.t
pack .m.t -in .m -side top -anchor w

label .m.t.lab -width 6 -font $dpyFont -text "      "
pack .m.t.lab -in .m.t -side left
for {set i 0} {$i < 16} {incr i 4} {
    label .m.t.a$i -width 8 -font $dpyFont -text [format "  0x---%x" [expr $i % 16]]
    pack .m.t.a$i -in .m.t -side left
}


# Keep track of range of addresses currently displayed
set minAddr 0
set memCnt  0
set haveMem 0

proc createMem {nminAddr nmemCnt} {
    global minAddr memCnt haveMem codeFont dpyFont normalBg
    set minAddr $nminAddr
    set memCnt $nmemCnt

    if { $haveMem } { destroy .m.e }

    # Create Memory Structure
    frame .m.e
    set haveMem 1
    pack .m.e -in .m -side top -anchor w
    # Now fill it with values
    for {set i 0} {$i < $memCnt} {incr i 16} {
	set addr [expr $minAddr + $i]

	frame .m.e.r$i
	pack .m.e.r$i -side bottom -in .m.e
	label .m.e.r$i.lab -width 6 -font $dpyFont -text [format "0x%.3x-"  [expr $addr / 16]]
	pack .m.e.r$i.lab -in .m.e.r$i -side left

	for {set j 0} {$j < 16} {incr j 4} {
	    set a [expr $addr + $j]
	    label .m.e.v$a -width 8 -font $dpyFont -relief ridge \
                -bg $normalBg
	    pack .m.e.v$a -in .m.e.r$i -side left
	}
    }
}

proc setMem {Addr Val} {
    global minAddr memCnt
    if {$Addr < $minAddr || $Addr > [expr $minAddr + $memCnt]} {
	error "Memory address $Addr out of range"
    }
    .m.e.v$Addr config -text [format %8x $Val]
}

proc clearMem {} {
    destroy .m.e
    createMem 0 0
}



###############################################################################
#    Command Line Initialization                                              #
###############################################################################

# Get code file name from input

# Find file with specified extension
proc findFile {tlist ext} {
    foreach t $tlist {
	if {[string match "*.$ext" $t]} {return $t}
    }
    return ""
}


set codeFile [findFile $argv yo]
if {$codeFile != ""} { loadCode $codeFile}
sim/seq/Makefile0000700005644400000240000000331311556020601012370 0ustar  tmsgrad# Modify this line to indicate the default version

VERSION=std

# Comment this out if you don't have Tcl/Tk on your system

GUIMODE=-DHAS_GUI

# Modify the following line so that gcc can find the libtcl.so and
# libtk.so libraries on your system. You may need to use the -L option
# to tell gcc which directory to look in. Comment this out if you
# don't have Tcl/Tk.

TKLIBS=-L/usr/lib -ltk -ltcl

# Modify the following line so that gcc can find the tcl.h and tk.h
# header files on your system. Comment this out if you don't have
# Tcl/Tk.

TKINC=-isystem /usr/include

# Modify these two lines to choose your compiler and compile time
# flags.

CC=gcc
CFLAGS=-Wall -O2

##################################################
# You shouldn't need to modify anything below here
##################################################

MISCDIR=../misc
HCL2C=$(MISCDIR)/hcl2c
INC=$(TKINC) -I$(MISCDIR) $(GUIMODE)
LIBS=$(TKLIBS) -lm
YAS=../misc/yas

all: ssim

# This rule builds the SEQ simulator (ssim)
ssim: seq-$(VERSION).hcl ssim.c  sim.h $(MISCDIR)/isa.c $(MISCDIR)/isa.h
	# Building the seq-$(VERSION).hcl version of SEQ
	$(HCL2C) -n seq-$(VERSION).hcl <seq-$(VERSION).hcl >seq-$(VERSION).c
	$(CC) $(CFLAGS) $(INC) -o ssim \
		seq-$(VERSION).c ssim.c $(MISCDIR)/isa.c $(LIBS)

# This rule builds the SEQ+ simulator (ssim+)
ssim+: seq+-std.hcl ssim.c sim.h $(MISCDIR)/isa.c $(MISCDIR)/isa.h 
	# Building the seq+-std.hcl version of SEQ+
	$(HCL2C) -n seq+-std.hcl <seq+-std.hcl >seq+-std.c
	$(CC) $(CFLAGS) $(INC) -o ssim+ \
		seq+-std.c ssim.c $(MISCDIR)/isa.c $(LIBS)

# These are implicit rules for assembling .yo files from .ys files.
.SUFFIXES: .ys .yo
.ys.yo:
	$(YAS) $*.ys


clean:
	rm -f ssim ssim+ seq*-*.c *.o *~ *.exe *.yo *.ys




sim/seq/README0000700005644400000240000000604211336106142011613 0ustar  tmsgrad/***********************************************************************
 * Sequential Y86 Simulators
 *
 * Copyright (c) 2002, 2010,  R. Bryant and D. O'Hallaron,
 * All rights reserved.
 * May not be used, modified, or copied without permission.
 ***********************************************************************/ 

This directory contains the code to construct simulators for SEQ,
SEQ+, and the variants of it described in the homework exercises.

**************************
1. Building the simulators
**************************

Different versions of the SEQ and SEQ+ simulators can be constructed
to use different HCL files when working on the different homework
problems.

Binary	VERSION	HCL File	Description
ssim	std	seq-std.hcl	Standard SEQ simulator described in textbook.
ssim	full	seq-full.hcl	For adding iaddl and leave to SEQ.
ssim+	std	seq+-std.hcl	Standard SEQ+ simulator described in textbook.

The simulators run in either TTY or GUI mode:

o TTY mode: A simulator running in TTY mode prints all information
about its runtime behavior on the terminal.  It's hard to understand what's
going on, but useful for automated testing, and doesn't require any
special installation features.

o GUI mode: A simulator running in GUI mode uses a fancy graphical
user interface.  Nice for visualizing and debugging, but requires
installation of Tcl/Tk on your system.

The Makefile has simple instructions for building TTY or GUI
simulators. A TTY simulator runs in TTY mode only. A GUI
simulator can run in either TTY mode or GUI mode, according to 
a command line argument.

Once you've configured the Makefile, you can build the different
simulators with commands of the form

	unix> make clean; make ssim VERSION=xxx

where "xxx" is one of the versions listed above.  For example, to build
the version of SEQ described in the CS:APP text based on the control
logic in seq-std.hcl, type

	unix> make clean; make ssim VERSION=std

To save typing, you can also set the Makefile's VERSION variable.

***********************
2. Using the simulators
***********************

The simulators take identical command line arguments:

Usage: ssim [-htg] [-l m] [-v n] file.yo

file.yo required in GUI mode, optional in TTY mode (default stdin)

   -h     Print this message
   -g     Run in GUI mode instead of TTY mode (default TTY mode)
   -l m   Set instruction limit to m [TTY mode only] (default 10000)
   -v n   Set verbosity level to 0 <= n <= 2 [TTY mode only] (default 2)
   -t     Test result against the ISA simulator (yis) [TTY model only]

********
3. Files
********

Makefile		Builds the SEQ and SEQ+ simulators
Makefile-sim		Makefile for student distribution
README			This file

seq+.tcl		TCL script for GUI version of SEQ+
seq.tcl			TCL script for GUI version of SEQ

ssim.c			Base sequential simulator code and header file
sim.h

seq-std.hcl		Standard SEQ control logic
seq+-std.hcl		Standard SEQ+ control logic	
seq-full.hcl		Template for the iaddl and leave problems (4.34-35)

seq-full-ans.hcl	Solution for the iaddl and leave problems (4.34-35)
			(Instructor distribution only)


sim/pipe/0000700005644400000240000000000011715057306011103 5ustar  tmsgradsim/pipe/pipe-1w.hcl0000600005644400000240000003264211336103306013055 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################

## Your task is to modify the design so that on any cycle, only
## one of the two possible (valE and valM) register writes will occur.
## This requires special handling of the popl instruction.
## Overall strategy:  IPOPL passes through pipe, 
## treated as stack pointer increment, but not incrementing the PC
## On refetch, modify fetched icode to indicate an instruction "IPOP2",
## which reads from memory.
## This requires modifying the definition of f_icode
## and lots of other changes.  Relevant positions to change
## are indicated by comments starting with keyword "1W".

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'
# 1W: Special instruction code for second try of popl
intsig IPOP2	'I_POP2'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
## 1W: Provide access to the PC value for the current instruction
intsig f_pc	'f_pc'               # Address of fetched instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
## 1W: To split ipopl into two cycles, need to be able to 
## modify value of icode,
## so that it will be IPOP2 when fetched for second time.
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	f_icode in { IJXX, ICALL } : f_valC;
	## 1W: Want to refetch popl one time
	1 : f_valP;
];

################ Decode Stage ######################################

## W1: Strategy.  Decoding of popl rA should be treated the same
## as would iaddl $4, %esp
## Decoding of pop2 rA treated same as mrmovl -4(%esp), rA

## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
## Forward into decode stage for valA
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	d_srcA == e_dstE : e_valE;    # Forward valE from execute
	d_srcA == M_dstM : m_valM;    # Forward valM from memory
	d_srcA == M_dstE : M_valE;    # Forward valE from memory
	d_srcA == W_dstM : W_valM;    # Forward valM from write back
	d_srcA == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalA;  # Use value read from register file
];

int d_valB = [
	d_srcB == e_dstE : e_valE;    # Forward valE from execute
	d_srcB == M_dstM : m_valM;    # Forward valM from memory
	d_srcB == M_dstE : M_valE;    # Forward valE from memory
	d_srcB == W_dstM : W_valM;    # Forward valM from write back
	d_srcB == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalB;  # Use value read from register file
];

################ Execute Stage #####################################

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
int e_valA = E_valA;    # Pass valA through stage

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

################ Write back stage ##################################

## 1W: For this problem, we introduce a multiplexor that merges
## valE and valM into a single value for writing to register port E.
## DO NOT CHANGE THIS LOGIC
## Merge both write back sources onto register port E 
## Set E port register ID
int w_dstE = [
	## writing from valM
	W_dstM != RNONE : W_dstM;
	1: W_dstE;
];

## Set E port value
int w_valE = [
	W_dstM != RNONE : W_valM;
	1: W_valE;
];

## Disable register port M
## Set M port register ID
int w_dstM = RNONE;

## Set M port value
int w_valM = 0;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB } ||
	# Stalling at fetch while ret passes through pipeline
	IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB };

bool D_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Stalling at fetch while ret passes through pipeline
	# but not condition for a load/use hazard
	!(E_icode in { IMRMOVL, IPOPL } && E_dstM in { d_srcA, d_srcB }) &&
	# 1W: This condition will change
	  IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB};

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/pipe-broken.hcl0000600005644400000240000002531611336103306014006 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################
## This version does not detect or handle any hazards

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	f_icode in { IJXX, ICALL } : f_valC;
	1 : f_valP;
];

################ Decode Stage ######################################


## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
## No forwarding.  valA is either valP or value from register file
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	1 : d_rvalA;  # Use value read from register file
];

## No forwarding.  valB is value from register file
int d_valB = d_rvalB;

################ Execute Stage #####################################

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
int e_valA = E_valA;    # Pass valA through stage

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

## Set E port register ID
int w_dstE = W_dstE;

## Set E port value
int w_valE = W_valE;

## Set M port register ID
int w_dstM = W_dstM;

## Set M port value
int w_valM = W_valM;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	0;

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	0;

bool D_bubble =
	0;

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	0;

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/pipe-btfnt.hcl0000600005644400000240000003131211336103306013634 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################

## Your task is to modify the design so that conditional branches are
## predicted as being taken when backward and not-taken when forward
## The code here is nearly identical to that for the normal pipeline.  
## Comments starting with keyword "BBTFNT" have been added at places
## relevant to the exercise.

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments
## BBTFNT: For modified branch prediction, need to distinguish
## conditional vs. unconditional branches
##### Jump conditions referenced explicitly
intsig UNCOND 'C_YES'       	     # Unconditional transfer

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	# BBTFNT: This is where you'll change the branch prediction rule
	f_icode in { IJXX, ICALL } : f_valC;
	1 : f_valP;
];

################ Decode Stage ######################################


## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
## Forward into decode stage for valA
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	d_srcA == e_dstE : e_valE;    # Forward valE from execute
	d_srcA == M_dstM : m_valM;    # Forward valM from memory
	d_srcA == M_dstE : M_valE;    # Forward valE from memory
	d_srcA == W_dstM : W_valM;    # Forward valM from write back
	d_srcA == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalA;  # Use value read from register file
];

int d_valB = [
	d_srcB == e_dstE : e_valE;    # Forward valE from execute
	d_srcB == M_dstM : m_valM;    # Forward valM from memory
	d_srcB == M_dstE : M_valE;    # Forward valE from memory
	d_srcB == W_dstM : W_valM;    # Forward valM from write back
	d_srcB == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalB;  # Use value read from register file
];

################ Execute Stage #####################################

# BBTFNT: When some branches are predicted as not-taken, you need some
# way to get valC into pipeline register M, so that
# you can correct for a mispredicted branch.

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
int e_valA = E_valA;    # Pass valA through stage

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

## Set E port register ID
int w_dstE = W_dstE;

## Set E port value
int w_valE = W_valE;

## Set M port register ID
int w_dstM = W_dstM;

## Set M port value
int w_valM = W_valM;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB } ||
	# Stalling at fetch while ret passes through pipeline
	IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB };

bool D_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# BBTFNT: This condition will change
	# Stalling at fetch while ret passes through pipeline
	# but not condition for a load/use hazard
	!(E_icode in { IMRMOVL, IPOPL } && E_dstM in { d_srcA, d_srcB }) &&
	  IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# BBTFNT: This condition will change
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB};

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/pipe-full.hcl0000600005644400000240000003043011336103306013461 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################

## Your task is to implement the iaddl and leave instructions
## The file contains a declaration of the icodes
## for iaddl (IIADDL) and leave (ILEAVE).
## Your job is to add the rest of the logic to make it work

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'
# Instruction code for iaddl instruction
intsig IIADDL	'I_IADDL'
# Instruction code for leave instruction
intsig ILEAVE	'I_LEAVE'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig REBP     'REG_EBP'    	     # Frame Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	f_icode in { IJXX, ICALL } : f_valC;
	1 : f_valP;
];

################ Decode Stage ######################################


## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
## Forward into decode stage for valA
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	d_srcA == e_dstE : e_valE;    # Forward valE from execute
	d_srcA == M_dstM : m_valM;    # Forward valM from memory
	d_srcA == M_dstE : M_valE;    # Forward valE from memory
	d_srcA == W_dstM : W_valM;    # Forward valM from write back
	d_srcA == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalA;  # Use value read from register file
];

int d_valB = [
	d_srcB == e_dstE : e_valE;    # Forward valE from execute
	d_srcB == M_dstM : m_valM;    # Forward valM from memory
	d_srcB == M_dstE : M_valE;    # Forward valE from memory
	d_srcB == W_dstM : W_valM;    # Forward valM from write back
	d_srcB == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalB;  # Use value read from register file
];

################ Execute Stage #####################################

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
int e_valA = E_valA;    # Pass valA through stage

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

## Set E port register ID
int w_dstE = W_dstE;

## Set E port value
int w_valE = W_valE;

## Set M port register ID
int w_dstM = W_dstM;

## Set M port value
int w_valM = W_valM;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB } ||
	# Stalling at fetch while ret passes through pipeline
	IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB };

bool D_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Stalling at fetch while ret passes through pipeline
	# but not condition for a load/use hazard
	!(E_icode in { IMRMOVL, IPOPL } && E_dstM in { d_srcA, d_srcB }) &&
	  IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB};

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/pipe-lf.hcl0000600005644400000240000003066611336103306013133 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################

## Your task is to implement load-forwarding, where a value
## read from memory can be stored to memory by the immediately
## following instruction without stalling
## This requires modifying the definition of e_valA
## and relaxing the stall conditions.  Relevant sections to change
## are shown in comments containing the keyword "LB"

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory
## LF: Carry srcA up to pipeline register M
intsig M_srcA 'ex_mem_curr->srca'	# Source A register ID

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	f_icode in { IJXX, ICALL } : f_valC;
	1 : f_valP;
];

################ Decode Stage ######################################


## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
## Forward into decode stage for valA
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	d_srcA == e_dstE : e_valE;    # Forward valE from execute
	d_srcA == M_dstM : m_valM;    # Forward valM from memory
	d_srcA == M_dstE : M_valE;    # Forward valE from memory
	d_srcA == W_dstM : W_valM;    # Forward valM from write back
	d_srcA == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalA;  # Use value read from register file
];

int d_valB = [
	d_srcB == e_dstE : e_valE;    # Forward valE from execute
	d_srcB == M_dstM : m_valM;    # Forward valM from memory
	d_srcB == M_dstE : M_valE;    # Forward valE from memory
	d_srcB == W_dstM : W_valM;    # Forward valM from write back
	d_srcB == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalB;  # Use value read from register file
];

################ Execute Stage #####################################

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
## LB: With load forwarding, want to insert valM 
##   from memory stage when appropriate
## Here it is set to the default used in the normal pipeline
int e_valA = [
	1 : E_valA;  # Use valA from stage pipe register
];

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

## Set E port register ID
int w_dstE = W_dstE;

## Set E port value
int w_valE = W_valE;

## Set M port register ID
int w_dstM = W_dstM;

## Set M port value
int w_valM = W_valM;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	# Conditions for a load/use hazard
	## Set this to the new load/use condition
	0 ||
	# Stalling at fetch while ret passes through pipeline
	IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	# Conditions for a load/use hazard
	## Set this to the new load/use condition
	0; 

bool D_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Stalling at fetch while ret passes through pipeline
	# but not condition for a load/use hazard
	!(E_icode in { IMRMOVL, IPOPL } && E_dstM in { d_srcA, d_srcB }) &&
	  IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Conditions for a load/use hazard
	## Set this to the new load/use condition
	0;

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/pipe-nobypass.hcl0000600005644400000240000002707111336103306014364 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################

## Your task is to make the pipeline work without using any forwarding
## The normal bypassing logic in the file is disabled.
## You can only change the pipeline control logic at the end of this file.
## The trick is to make the pipeline stall whenever there is a data hazard.

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	f_icode in { IJXX, ICALL } : f_valC;
	1 : f_valP;
];

################ Decode Stage ######################################


## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
##  DO NOT MODIFY THE FOLLOWING CODE.
## No forwarding.  valA is either valP or value from register file
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	1 : d_rvalA;  # Use value read from register file
];

## No forwarding.  valB is value from register file
int d_valB = d_rvalB;

################ Execute Stage #####################################

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
int e_valA = E_valA;    # Pass valA through stage

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

## Set E port register ID
int w_dstE = W_dstE;

## Set E port value
int w_valE = W_valE;

## Set M port register ID
int w_dstM = W_dstM;

## Set M port value
int w_valM = W_valM;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	# Modify the following to stall the update of pipeline register F
	0 ||
	# Stalling at fetch while ret passes through pipeline
	IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	# Modify the following to stall the instruction in decode
	0;

bool D_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Stalling at fetch while ret passes through pipeline
	!(E_icode in { IMRMOVL, IPOPL } && E_dstM in { d_srcA, d_srcB }) &&
	# but not condition for a generate/use hazard
	!0 &&
	  IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Modify the following to inject bubble into the execute stage
	0;

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/pipe-nt.hcl0000600005644400000240000003111711336103306013143 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################

## Your task is to modify the design so that conditional branches are
## predicted as being not-taken.  The code here is nearly identical
## to that for the normal pipeline.  
## Comments starting with keyword "BNT" have been added at places
## relevant to the exercise.

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments
## BNT: For modified branch prediction, need to distinguish
## conditional vs. unconditional branches
##### Jump conditions referenced explicitly
intsig UNCOND 'C_YES'       	     # Unconditional transfer

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	# BNT: This is where you'll change the branch prediction rule
	f_icode in { IJXX, ICALL } : f_valC;
	1 : f_valP;
];

################ Decode Stage ######################################


## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
## Forward into decode stage for valA
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	d_srcA == e_dstE : e_valE;    # Forward valE from execute
	d_srcA == M_dstM : m_valM;    # Forward valM from memory
	d_srcA == M_dstE : M_valE;    # Forward valE from memory
	d_srcA == W_dstM : W_valM;    # Forward valM from write back
	d_srcA == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalA;  # Use value read from register file
];

int d_valB = [
	d_srcB == e_dstE : e_valE;    # Forward valE from execute
	d_srcB == M_dstM : m_valM;    # Forward valM from memory
	d_srcB == M_dstE : M_valE;    # Forward valE from memory
	d_srcB == W_dstM : W_valM;    # Forward valM from write back
	d_srcB == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalB;  # Use value read from register file
];

################ Execute Stage #####################################

# BNT: When some branches are predicted as not-taken, you need some
# way to get valC into pipeline register M, so that
# you can correct for a mispredicted branch.

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
int e_valA = E_valA;    # Pass valA through stage

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

## Set E port register ID
int w_dstE = W_dstE;

## Set E port value
int w_valE = W_valE;

## Set M port register ID
int w_dstM = W_dstM;

## Set M port value
int w_valM = W_valM;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB } ||
	# Stalling at fetch while ret passes through pipeline
	IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB };

bool D_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Stalling at fetch while ret passes through pipeline
	# but not condition for a load/use hazard
	!(E_icode in { IMRMOVL, IPOPL } && E_dstM in { d_srcA, d_srcB }) &&
	  IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB};

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/pipe-std.hcl0000600005644400000240000002761511336103306013324 0ustar  tmsgrad#/* $begin pipe-all-hcl */
####################################################################
#    HCL Description of Control for Pipelined Y86 Processor        #
#    Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010     #
####################################################################

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "pipeline.h"'
quote '#include "stages.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'int main(int argc, char *argv[]){return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86 Instruction Codes #############
intsig INOP 	'I_NOP'
intsig IHALT	'I_HALT'
intsig IRRMOVL	'I_RRMOVL'
intsig IIRMOVL	'I_IRMOVL'
intsig IRMMOVL	'I_RMMOVL'
intsig IMRMOVL	'I_MRMOVL'
intsig IOPL	'I_ALU'
intsig IJXX	'I_JMP'
intsig ICALL	'I_CALL'
intsig IRET	'I_RET'
intsig IPUSHL	'I_PUSHL'
intsig IPOPL	'I_POPL'

##### Symbolic represenations of Y86 function codes            #####
intsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86 Registers referenced      #####
intsig RESP     'REG_ESP'    	     # Stack Pointer
intsig RNONE    'REG_NONE'   	     # Special value indicating "no register"

##### ALU Functions referenced explicitly ##########################
intsig ALUADD	'A_ADD'		     # ALU should add its arguments

##### Possible instruction status values                       #####
intsig SBUB	'STAT_BUB'	# Bubble in stage
intsig SAOK	'STAT_AOK'	# Normal execution
intsig SADR	'STAT_ADR'	# Invalid memory address
intsig SINS	'STAT_INS'	# Invalid instruction
intsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ##############

##### Pipeline Register F ##########################################

intsig F_predPC 'pc_curr->pc'	     # Predicted value of PC

##### Intermediate Values in Fetch Stage ###########################

intsig imem_icode  'imem_icode'      # icode field from instruction memory
intsig imem_ifun   'imem_ifun'       # ifun  field from instruction memory
intsig f_icode	'if_id_next->icode'  # (Possibly modified) instruction code
intsig f_ifun	'if_id_next->ifun'   # Fetched instruction function
intsig f_valC	'if_id_next->valc'   # Constant data of fetched instruction
intsig f_valP	'if_id_next->valp'   # Address of following instruction
boolsig imem_error 'imem_error'	     # Error signal from instruction memory
boolsig instr_valid 'instr_valid'    # Is fetched instruction valid?

##### Pipeline Register D ##########################################
intsig D_icode 'if_id_curr->icode'   # Instruction code
intsig D_rA 'if_id_curr->ra'	     # rA field from instruction
intsig D_rB 'if_id_curr->rb'	     # rB field from instruction
intsig D_valP 'if_id_curr->valp'     # Incremented PC

##### Intermediate Values in Decode Stage  #########################

intsig d_srcA	 'id_ex_next->srca'  # srcA from decoded instruction
intsig d_srcB	 'id_ex_next->srcb'  # srcB from decoded instruction
intsig d_rvalA 'd_regvala'	     # valA read from register file
intsig d_rvalB 'd_regvalb'	     # valB read from register file

##### Pipeline Register E ##########################################
intsig E_icode 'id_ex_curr->icode'   # Instruction code
intsig E_ifun  'id_ex_curr->ifun'    # Instruction function
intsig E_valC  'id_ex_curr->valc'    # Constant data
intsig E_srcA  'id_ex_curr->srca'    # Source A register ID
intsig E_valA  'id_ex_curr->vala'    # Source A value
intsig E_srcB  'id_ex_curr->srcb'    # Source B register ID
intsig E_valB  'id_ex_curr->valb'    # Source B value
intsig E_dstE 'id_ex_curr->deste'    # Destination E register ID
intsig E_dstM 'id_ex_curr->destm'    # Destination M register ID

##### Intermediate Values in Execute Stage #########################
intsig e_valE 'ex_mem_next->vale'	# valE generated by ALU
boolsig e_Cnd 'ex_mem_next->takebranch' # Does condition hold?
intsig e_dstE 'ex_mem_next->deste'      # dstE (possibly modified to be RNONE)

##### Pipeline Register M                  #########################
intsig M_stat 'ex_mem_curr->status'     # Instruction status
intsig M_icode 'ex_mem_curr->icode'	# Instruction code
intsig M_ifun  'ex_mem_curr->ifun'	# Instruction function
intsig M_valA  'ex_mem_curr->vala'      # Source A value
intsig M_dstE 'ex_mem_curr->deste'	# Destination E register ID
intsig M_valE  'ex_mem_curr->vale'      # ALU E value
intsig M_dstM 'ex_mem_curr->destm'	# Destination M register ID
boolsig M_Cnd 'ex_mem_curr->takebranch'	# Condition flag
boolsig dmem_error 'dmem_error'	        # Error signal from instruction memory

##### Intermediate Values in Memory Stage ##########################
intsig m_valM 'mem_wb_next->valm'	# valM generated by memory
intsig m_stat 'mem_wb_next->status'	# stat (possibly modified to be SADR)

##### Pipeline Register W ##########################################
intsig W_stat 'mem_wb_curr->status'     # Instruction status
intsig W_icode 'mem_wb_curr->icode'	# Instruction code
intsig W_dstE 'mem_wb_curr->deste'	# Destination E register ID
intsig W_valE  'mem_wb_curr->vale'      # ALU E value
intsig W_dstM 'mem_wb_curr->destm'	# Destination M register ID
intsig W_valM  'mem_wb_curr->valm'	# Memory M value

####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

## What address should instruction be fetched at
int f_pc = [
	# Mispredicted branch.  Fetch at incremented PC
	M_icode == IJXX && !M_Cnd : M_valA;
	# Completion of RET instruction.
	W_icode == IRET : W_valM;
	# Default: Use predicted value of PC
	1 : F_predPC;
];

## Determine icode of fetched instruction
int f_icode = [
	imem_error : INOP;
	1: imem_icode;
];

# Determine ifun
int f_ifun = [
	imem_error : FNONE;
	1: imem_ifun;
];

# Is instruction valid?
bool instr_valid = f_icode in 
	{ INOP, IHALT, IRRMOVL, IIRMOVL, IRMMOVL, IMRMOVL,
	  IOPL, IJXX, ICALL, IRET, IPUSHL, IPOPL };

# Determine status code for fetched instruction
int f_stat = [
	imem_error: SADR;
	!instr_valid : SINS;
	f_icode == IHALT : SHLT;
	1 : SAOK;
];

# Does fetched instruction require a regid byte?
bool need_regids =
	f_icode in { IRRMOVL, IOPL, IPUSHL, IPOPL, 
		     IIRMOVL, IRMMOVL, IMRMOVL };

# Does fetched instruction require a constant word?
bool need_valC =
	f_icode in { IIRMOVL, IRMMOVL, IMRMOVL, IJXX, ICALL };

# Predict next value of PC
int f_predPC = [
	f_icode in { IJXX, ICALL } : f_valC;
	1 : f_valP;
];

################ Decode Stage ######################################


## What register should be used as the A source?
int d_srcA = [
	D_icode in { IRRMOVL, IRMMOVL, IOPL, IPUSHL  } : D_rA;
	D_icode in { IPOPL, IRET } : RESP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
int d_srcB = [
	D_icode in { IOPL, IRMMOVL, IMRMOVL  } : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
int d_dstE = [
	D_icode in { IRRMOVL, IIRMOVL, IOPL} : D_rB;
	D_icode in { IPUSHL, IPOPL, ICALL, IRET } : RESP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
int d_dstM = [
	D_icode in { IMRMOVL, IPOPL } : D_rA;
	1 : RNONE;  # Don't write any register
];

## What should be the A value?
## Forward into decode stage for valA
int d_valA = [
	D_icode in { ICALL, IJXX } : D_valP; # Use incremented PC
	d_srcA == e_dstE : e_valE;    # Forward valE from execute
	d_srcA == M_dstM : m_valM;    # Forward valM from memory
	d_srcA == M_dstE : M_valE;    # Forward valE from memory
	d_srcA == W_dstM : W_valM;    # Forward valM from write back
	d_srcA == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalA;  # Use value read from register file
];

int d_valB = [
	d_srcB == e_dstE : e_valE;    # Forward valE from execute
	d_srcB == M_dstM : m_valM;    # Forward valM from memory
	d_srcB == M_dstE : M_valE;    # Forward valE from memory
	d_srcB == W_dstM : W_valM;    # Forward valM from write back
	d_srcB == W_dstE : W_valE;    # Forward valE from write back
	1 : d_rvalB;  # Use value read from register file
];

################ Execute Stage #####################################

## Select input A to ALU
int aluA = [
	E_icode in { IRRMOVL, IOPL } : E_valA;
	E_icode in { IIRMOVL, IRMMOVL, IMRMOVL } : E_valC;
	E_icode in { ICALL, IPUSHL } : -4;
	E_icode in { IRET, IPOPL } : 4;
	# Other instructions don't need ALU
];

## Select input B to ALU
int aluB = [
	E_icode in { IRMMOVL, IMRMOVL, IOPL, ICALL, 
		     IPUSHL, IRET, IPOPL } : E_valB;
	E_icode in { IRRMOVL, IIRMOVL } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
int alufun = [
	E_icode == IOPL : E_ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = E_icode == IOPL &&
	# State changes only during normal operation
	!m_stat in { SADR, SINS, SHLT } && !W_stat in { SADR, SINS, SHLT };

## Generate valA in execute stage
int e_valA = E_valA;    # Pass valA through stage

## Set dstE to RNONE in event of not-taken conditional move
int e_dstE = [
	E_icode == IRRMOVL && !e_Cnd : RNONE;
	1 : E_dstE;
];

################ Memory Stage ######################################

## Select memory address
int mem_addr = [
	M_icode in { IRMMOVL, IPUSHL, ICALL, IMRMOVL } : M_valE;
	M_icode in { IPOPL, IRET } : M_valA;
	# Other instructions don't need address
];

## Set read control signal
bool mem_read = M_icode in { IMRMOVL, IPOPL, IRET };

## Set write control signal
bool mem_write = M_icode in { IRMMOVL, IPUSHL, ICALL };

#/* $begin pipe-m_stat-hcl */
## Update the status
int m_stat = [
	dmem_error : SADR;
	1 : M_stat;
];
#/* $end pipe-m_stat-hcl */

## Set E port register ID
int w_dstE = W_dstE;

## Set E port value
int w_valE = W_valE;

## Set M port register ID
int w_dstM = W_dstM;

## Set M port value
int w_valM = W_valM;

## Update processor status
int Stat = [
	W_stat == SBUB : SAOK;
	1 : W_stat;
];

################ Pipeline Register Control #########################

# Should I stall or inject a bubble into Pipeline Register F?
# At most one of these can be true.
bool F_bubble = 0;
bool F_stall =
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB } ||
	# Stalling at fetch while ret passes through pipeline
	IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register D?
# At most one of these can be true.
bool D_stall = 
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB };

bool D_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Stalling at fetch while ret passes through pipeline
	# but not condition for a load/use hazard
	!(E_icode in { IMRMOVL, IPOPL } && E_dstM in { d_srcA, d_srcB }) &&
	  IRET in { D_icode, E_icode, M_icode };

# Should I stall or inject a bubble into Pipeline Register E?
# At most one of these can be true.
bool E_stall = 0;
bool E_bubble =
	# Mispredicted branch
	(E_icode == IJXX && !e_Cnd) ||
	# Conditions for a load/use hazard
	E_icode in { IMRMOVL, IPOPL } &&
	 E_dstM in { d_srcA, d_srcB};

# Should I stall or inject a bubble into Pipeline Register M?
# At most one of these can be true.
bool M_stall = 0;
# Start injecting bubbles as soon as exception passes through memory stage
bool M_bubble = m_stat in { SADR, SINS, SHLT } || W_stat in { SADR, SINS, SHLT };

# Should I stall or inject a bubble into Pipeline Register W?
bool W_stall = W_stat in { SADR, SINS, SHLT };
bool W_bubble = 0;
#/* $end pipe-all-hcl */
sim/pipe/psim.c0000700005644400000240000012562711251744511012233 0ustar  tmsgrad/***********************************************************************
 * psim.c - Pipelined Y86 simulator
 * 
 * Copyright (c) 2010, R. Bryant and D. O'Hallaron, All rights reserved.
 * May not be used, modified, or copied without permission.
 ***********************************************************************/ 

#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <unistd.h>
#include <string.h>

#include "isa.h"
#include "pipeline.h"
#include "stages.h"
#include "sim.h"

#define MAXBUF 1024
#define DEFAULTNAME "Y86 Simulator: "

#ifdef HAS_GUI
#include <tk.h>
#endif /* HAS_GUI */

#define MAXARGS 128
#define MAXBUF 1024
#define TKARGS 3


/***************
 * Begin Globals
 ***************/

/* Simulator name defined and initialized by the compiled HCL file */
/* according to the -n argument supplied to hcl2c */
extern  char simname[];

/* Parameters modifed by the command line */
int gui_mode = FALSE;    /* Run in GUI mode instead of TTY mode? (-g) */
char *object_filename;   /* The input object file name. */
FILE *object_file;       /* Input file handle */
bool_t verbosity = 2;    /* Verbosity level [TTY only] (-v) */ 
int instr_limit = 10000; /* Instruction limit [TTY only] (-l) */
bool_t do_check = FALSE; /* Test with ISA simulator? [TTY only] (-t) */

/************* 
 * End Globals 
 *************/


/***************************
 * Begin function prototypes 
 ***************************/

static void usage(char *name);           /* Print helpful usage message */
static void run_tty_sim();               /* Run simulator in TTY mode */

#ifdef HAS_GUI
void addAppCommands(Tcl_Interp *interp); /* Add application-dependent commands */
#endif /* HAS_GUI */

/*************************
 * End function prototypes
 *************************/


/*******************************************************************
 * Part 1: This part is the initial entry point that handles general
 * initialization. It parses the command line and does any necessary
 * setup to run in either TTY or GUI mode, and then starts the
 * simulation.
 *******************************************************************/

/* 
 * sim_main - main simulator routine. This function is called from the
 * main() routine in the HCL file.
 */
int sim_main(int argc, char **argv)
{
    int i;
    int c;
    char *myargv[MAXARGS];

    
    /* Parse the command line arguments */
    while ((c = getopt(argc, argv, "htgl:v:")) != -1) {
	switch(c) {
	case 'h':
	    usage(argv[0]);
	    break;
	case 'l':
	    instr_limit = atoi(optarg);
	    break;
	case 'v':
	    verbosity = atoi(optarg);
	    if (verbosity < 0 || verbosity > 2) {
		printf("Invalid verbosity %d\n", verbosity);
		usage(argv[0]);
	    }
	    break;
	case 't':
	    do_check = TRUE;
	    break;
	case 'g':
	    gui_mode = TRUE;
	    break;
	default:
	    printf("Invalid option '%c'\n", c);
	    usage(argv[0]);
	    break;
	}
    }


    /* Do we have too many arguments? */
    if (optind < argc - 1) {
	printf("Too many command line arguments:");
	for (i = optind; i < argc; i++)
	    printf(" %s", argv[i]);
	printf("\n");
	usage(argv[0]);
    }


    /* The single unflagged argument should be the object file name */
    object_filename = NULL;
    object_file = NULL;
    if (optind < argc) {
	object_filename = argv[optind];
	object_file = fopen(object_filename, "r");
	if (!object_file) {
	    fprintf(stderr, "Couldn't open object file %s\n", object_filename);
	    exit(1);
	}
    }


    /* Run the simulator in GUI mode (-g flag) */
    if (gui_mode) {

#ifndef HAS_GUI
	printf("To run in GUI mode, you must recompile with the HAS_GUI constant defined.\n");
	exit(1);
#endif /* HAS_GUI */

	/* In GUI mode, we must specify the object file on command line */ 
	if (!object_file) {
	    printf("Missing object file argument in GUI mode\n");
	    usage(argv[0]);
	}

	/* Build the command line for the GUI simulator */
	for (i = 0; i < TKARGS; i++) {
	    if ((myargv[i] = malloc(MAXBUF*sizeof(char))) == NULL) {
		perror("malloc error");
		exit(1);
	    }
	}
	strcpy(myargv[0], argv[0]);
	strcpy(myargv[1], "pipe.tcl");
	strcpy(myargv[2], object_filename);
	myargv[3] = NULL;

	/* Start the GUI simulator */
#ifdef HAS_GUI
	Tk_Main(TKARGS, myargv, Tcl_AppInit);
#endif /* HAS_GUI */
	exit(0);
    }

    /* Otherwise, run the simulator in TTY mode (no -g flag) */
    run_tty_sim();

    exit(0);
}

/* 
 * run_tty_sim - Run the simulator in TTY mode
 */
static void run_tty_sim() 
{
    int icount = 0;
    byte_t run_status = STAT_AOK;
    cc_t result_cc = 0;
    int byte_cnt = 0;
    mem_t mem0, reg0;
    state_ptr isa_state = NULL;


    /* In TTY mode, the default object file comes from stdin */
    if (!object_file) {
	object_file = stdin;
    }

    if (verbosity >= 2)
	sim_set_dumpfile(stdout);
    sim_init();

    /* Emit simulator name */
    if (verbosity >= 2)
	printf("%s\n", simname);

    byte_cnt = load_mem(mem, object_file, 1);
    if (byte_cnt == 0) {
	fprintf(stderr, "No lines of code found\n");
	exit(1);
    } else if (verbosity >= 2) {
	printf("%d bytes of code read\n", byte_cnt);
    }
    fclose(object_file);
    if (do_check) {
	isa_state = new_state(0);
	free_mem(isa_state->r);
	free_mem(isa_state->m);
	isa_state->m = copy_mem(mem);
	isa_state->r = copy_mem(reg);
	isa_state->cc = cc;
    }

    mem0 = copy_mem(mem);
    reg0 = copy_mem(reg);
    
    icount = sim_run_pipe(instr_limit, 5*instr_limit, &run_status, &result_cc);
    if (verbosity > 0) {
	printf("%d instructions executed\n", icount);
	printf("Status = %s\n", stat_name(run_status));
	printf("Condition Codes: %s\n", cc_name(result_cc));
	printf("Changed Register State:\n");
	diff_reg(reg0, reg, stdout);
	printf("Changed Memory State:\n");
	diff_mem(mem0, mem, stdout);
    }
    if (do_check) {
	byte_t e = STAT_AOK;
	int step;
	bool_t match = TRUE;

	for (step = 0; step < instr_limit && e == STAT_AOK; step++) {
	    e = step_state(isa_state, stdout);
	}

	if (diff_reg(isa_state->r, reg, NULL)) {
	    match = FALSE;
	    if (verbosity > 0) {
		printf("ISA Register != Pipeline Register File\n");
		diff_reg(isa_state->r, reg, stdout);
	    }
	}
	if (diff_mem(isa_state->m, mem, NULL)) {
	    match = FALSE;
	    if (verbosity > 0) {
		printf("ISA Memory != Pipeline Memory\n");
		diff_mem(isa_state->m, mem, stdout);
	    }
	}
	if (isa_state->cc != result_cc) {
	    match = FALSE;
	    if (verbosity > 0) {
		printf("ISA Cond. Codes (%s) != Pipeline Cond. Codes (%s)\n",
		       cc_name(isa_state->cc), cc_name(result_cc));
	    }
	}
	if (match) {
	    printf("ISA Check Succeeds\n");
	} else {
	    printf("ISA Check Fails\n");
	}
    }

    /* Emit CPI statistics */
    {
	double cpi = instructions > 0 ? (double) cycles/instructions : 1.0;
	printf("CPI: %d cycles/%d instructions = %.2f\n",
	       cycles, instructions, cpi);
    }

}

/*
 * usage - print helpful diagnostic information
 */
static void usage(char *name)
{
    printf("Usage: %s [-htg] [-l m] [-v n] file.yo\n", name);
    printf("file.yo arg required in GUI mode, optional in TTY mode (default stdin)\n");
    printf("   -h     Print this message\n");
    printf("   -g     Run in GUI mode instead of TTY mode (default TTY)\n");  
    printf("   -l m   Set instruction limit to m [TTY mode only] (default %d)\n", instr_limit);
    printf("   -v n   Set verbosity level to 0 <= n <= 2 [TTY mode only] (default %d)\n", verbosity);
    printf("   -t     Test result against ISA simulator [TTY mode only]\n");
    exit(0);
}


/*********************************************************
 * Part 2: This part contains the core simulator routines.
 *********************************************************/


/*****************
 *  Part 2 Globals
 *****************/

/* Performance monitoring */

/* Has simulator gotten past initial bubbles? */
static int starting_up = 1;

/* How many cycles have been simulated? */
int cycles = 0;
/* How many instructions have passed through the WB stage? */
int instructions = 0;

/* Both instruction and data memory */
mem_t mem;
int minAddr = 0;
int memCnt = 0;

/* Register file */
mem_t reg;
/* Condition code register */
cc_t cc;
/* Status code */
stat_t status;


/* Pending updates to state */
word_t cc_in = DEFAULT_CC;
word_t wb_destE = REG_NONE;
word_t wb_valE = 0;
word_t wb_destM = REG_NONE;
word_t wb_valM = 0;
word_t mem_addr = 0;
word_t mem_data = 0;
bool_t mem_write = FALSE;

/* EX Operand sources */
mux_source_t amux = MUX_NONE;
mux_source_t bmux = MUX_NONE;

/* Current and next states of all pipeline registers */
pc_ptr pc_curr;
if_id_ptr if_id_curr;
id_ex_ptr id_ex_curr;
ex_mem_ptr ex_mem_curr;
mem_wb_ptr mem_wb_curr;

pc_ptr pc_next;
if_id_ptr if_id_next;
id_ex_ptr id_ex_next;
ex_mem_ptr ex_mem_next;
mem_wb_ptr mem_wb_next;

/* Intermediate values */
word_t f_pc;
byte_t imem_icode;
byte_t imem_ifun;
bool_t imem_error;
bool_t instr_valid;
word_t d_regvala;
word_t d_regvalb;
word_t e_vala;
word_t e_valb;
bool_t e_bcond;
bool_t dmem_error;

/* The pipeline state */
pipe_ptr pc_state, if_id_state, id_ex_state, ex_mem_state, mem_wb_state;

/* Simulator operating mode */
sim_mode_t sim_mode = S_FORWARD;
/* Log file */
FILE *dumpfile = NULL;

/*****************************************************************************
 * reporting code
 *****************************************************************************/

#ifdef HAS_GUI
/* used for formatting instructions */
static char status_msg[128];

static char *format_pc(pc_ptr state)
{
    char pstring[9];
    wstring(state->pc, 4, 32, pstring);
    sprintf(status_msg, "%s %s", stat_name(state->status), pstring);
    return status_msg;
}

static char *format_if_id(if_id_ptr state)
{
    char valcstring[9];
    char valpstring[9];
    wstring(state->valc, 4, 32, valcstring);
    wstring(state->valp, 4, 32, valpstring);
    sprintf(status_msg, "%s %s %s %s %s %s",
	    stat_name(state->status),
	    iname(HPACK(state->icode,state->ifun)),
	    reg_name(state->ra),
	    reg_name(state->rb),
	    valcstring,
	    valpstring);
    return status_msg;
}

static char *format_id_ex(id_ex_ptr state)
{
    char valcstring[9];
    char valastring[9];
    char valbstring[9];
    wstring(state->valc, 4, 32, valcstring);
    wstring(state->vala, 4, 32, valastring);
    wstring(state->valb, 4, 32, valbstring);
    sprintf(status_msg, "%s %s %s %s %s %s %s %s %s",
	    stat_name(state->status),
	    iname(HPACK(state->icode, state->ifun)),
	    valcstring,
	    valastring,
	    valbstring,
	    reg_name(state->deste),
	    reg_name(state->destm),
	    reg_name(state->srca),
	    reg_name(state->srcb));
    return status_msg;
}

static char *format_ex_mem(ex_mem_ptr state)
{
    char valestring[9];
    char valastring[9];
    wstring(state->vale, 4, 32, valestring);
    wstring(state->vala, 4, 32, valastring);
    sprintf(status_msg, "%s %s %c %s %s %s %s",
	    stat_name(state->status),
	    iname(HPACK(state->icode, state->ifun)),
	    state->takebranch ? 'Y' : 'N',
	    valestring,
	    valastring,
	    reg_name(state->deste),
	    reg_name(state->destm));

    return status_msg;
}

static char *format_mem_wb(mem_wb_ptr state)
{
    char valestring[9];
    char valmstring[9];
    wstring(state->vale, 4, 32, valestring);
    wstring(state->valm, 4, 32, valmstring);
    sprintf(status_msg, "%s %s %s %s %s %s",
	    stat_name(state->status),
	    iname(HPACK(state->icode, state->ifun)),
	    valestring,
	    valmstring,
	    reg_name(state->deste),
	    reg_name(state->destm));

    return status_msg;
}
#endif /* HAS_GUI */

/* Report system state */
static void sim_report() 
{

#ifdef HAS_GUI
    if (gui_mode) {
	report_pc(f_pc, pc_curr->status != STAT_BUB,
		  if_id_curr->stage_pc, if_id_curr->status != STAT_BUB,
		  id_ex_curr->stage_pc, id_ex_curr->status != STAT_BUB,
		  ex_mem_curr->stage_pc, ex_mem_curr->status != STAT_BUB,
		  mem_wb_curr->stage_pc, mem_wb_curr->status != STAT_BUB);
	report_state("F", 0, format_pc(pc_next));
	report_state("F", 1, format_pc(pc_curr));
	report_state("D", 0, format_if_id(if_id_next));
	report_state("D", 1, format_if_id(if_id_curr));
	report_state("E", 0, format_id_ex(id_ex_next));
	report_state("E", 1, format_id_ex(id_ex_curr));
	report_state("M", 0, format_ex_mem(ex_mem_next));
	report_state("M", 1, format_ex_mem(ex_mem_curr));
	report_state("W", 0, format_mem_wb(mem_wb_next));
	report_state("W", 1, format_mem_wb(mem_wb_curr));
	/* signal_sources(); */
	show_cc(cc);
	show_stat(status);
	show_cpi();
    }
#endif

}

/*****************************************************************************
 * pipeline control
 * These functions can be used to handle hazards
 *****************************************************************************/

/* bubble stage (has effect at next update) */
void sim_bubble_stage(stage_id_t stage) 
{
    switch (stage)
	{
	case IF_STAGE : pc_state->op     = P_BUBBLE; break;
	case ID_STAGE : if_id_state->op  = P_BUBBLE; break;
	case EX_STAGE : id_ex_state->op  = P_BUBBLE; break;
	case MEM_STAGE: ex_mem_state->op = P_BUBBLE; break;
	case WB_STAGE : mem_wb_state->op = P_BUBBLE; break;
	}
}

/* stall stage (has effect at next update) */
void sim_stall_stage(stage_id_t stage) {
    switch (stage)
	{
	case IF_STAGE : pc_state->op     = P_STALL; break;
	case ID_STAGE : if_id_state->op  = P_STALL; break;
	case EX_STAGE : id_ex_state->op  = P_STALL; break;
	case MEM_STAGE: ex_mem_state->op = P_STALL; break;
	case WB_STAGE : mem_wb_state->op = P_STALL; break;
	}
}


static int initialized = 0;

void sim_init()
{
    /* Create memory and register files */
    initialized = 1;
    mem = init_mem(MEM_SIZE);
    reg = init_reg();
    
    /* create 5 pipe registers */
    pc_state     = new_pipe(sizeof(pc_ele), (void *) &bubble_pc);
    if_id_state  = new_pipe(sizeof(if_id_ele), (void *) &bubble_if_id);
    id_ex_state  = new_pipe(sizeof(id_ex_ele), (void *) &bubble_id_ex);
    ex_mem_state = new_pipe(sizeof(ex_mem_ele), (void *) &bubble_ex_mem);
    mem_wb_state = new_pipe(sizeof(mem_wb_ele), (void *) &bubble_mem_wb);
  
    /* connect them to the pipeline stages */
    pc_next   = pc_state->next;
    pc_curr   = pc_state->current;
  
    if_id_next = if_id_state->next;
    if_id_curr = if_id_state->current;

    id_ex_next = id_ex_state->next;
    id_ex_curr = id_ex_state->current;

    ex_mem_next = ex_mem_state->next;
    ex_mem_curr = ex_mem_state->current;

    mem_wb_next = mem_wb_state->next;
    mem_wb_curr = mem_wb_state->current;

    sim_reset();
    clear_mem(mem);
}

void sim_reset()
{
    if (!initialized)
	sim_init();
    clear_pipes();
    clear_mem(reg);
    minAddr = 0;
    memCnt = 0;
    starting_up = 1;
    cycles = instructions = 0;
    cc = DEFAULT_CC;
    status = STAT_AOK;

#ifdef HAS_GUI
    if (gui_mode) {
	signal_register_clear();
	create_memory_display(minAddr, memCnt);
    }
#endif

    amux = bmux = MUX_NONE;
    cc = cc_in = DEFAULT_CC;
    wb_destE = REG_NONE;
    wb_valE = 0;
    wb_destM = REG_NONE;
    wb_valM = 0;
    mem_addr = 0;
    mem_data = 0;
    mem_write = FALSE;
    sim_report();
}

/* Update state elements */
/* May need to disable updating of memory & condition codes */
static void update_state(bool_t update_mem, bool_t update_cc)
{
    /* Writeback(s):
       If either register is REG_NONE, write will have no effect .
       Order of two writes determines semantics of
       popl %esp.  According to ISA, %esp will get popped value
    */

    if (wb_destE != REG_NONE) {
	sim_log("\tWriteback: Wrote 0x%x to register %s\n",
		wb_valE, reg_name(wb_destE));
	set_reg_val(reg, wb_destE, wb_valE);
    }
    if (wb_destM != REG_NONE) {
	sim_log("\tWriteback: Wrote 0x%x to register %s\n",
		wb_valM, reg_name(wb_destM));
	set_reg_val(reg, wb_destM, wb_valM);
    }

    /* Memory write */
    if (mem_write && !update_mem) {
	sim_log("\tDisabled write of 0x%x to address 0x%x\n", mem_data, mem_addr);
    }
    if (update_mem && mem_write) {
	if (!set_word_val(mem, mem_addr, mem_data)) {
	    sim_log("\tCouldn't write to address 0x%x\n", mem_addr);
	} else {
	    sim_log("\tWrote 0x%x to address 0x%x\n", mem_data, mem_addr);

#ifdef HAS_GUI
	    if (gui_mode) {
		if (mem_addr % 4 != 0) {
		    /* Just did a misaligned write.
		       Need to display both words */
		    word_t align_addr = mem_addr & ~0x3;
		    word_t val;
		    get_word_val(mem, align_addr, &val);
		    set_memory(align_addr, val);
		    align_addr+=4;
		    get_word_val(mem, align_addr, &val);
		    set_memory(align_addr, val);
		} else {
		    set_memory(mem_addr, mem_data);
		}
	    }
#endif

	}
    }
    if (update_cc)
	cc = cc_in;
}

/* Text representation of status */
void tty_report(int cyc) {
  sim_log("\nCycle %d. CC=%s, Stat=%s\n", cyc, cc_name(cc), stat_name(status));

  sim_log("F: predPC = 0x%x\n", pc_curr->pc);

  sim_log("D: instr = %s, rA = %s, rB = %s, valC = 0x%x, valP = 0x%x, Stat = %s\n",
	  iname(HPACK(if_id_curr->icode, if_id_curr->ifun)),
	  reg_name(if_id_curr->ra), reg_name(if_id_curr->rb),
	  if_id_curr->valc, if_id_curr->valp,
	  stat_name(if_id_curr->status));

  sim_log("E: instr = %s, valC = 0x%x, valA = 0x%x, valB = 0x%x\n   srcA = %s, srcB = %s, dstE = %s, dstM = %s, Stat = %s\n",
	  iname(HPACK(id_ex_curr->icode, id_ex_curr->ifun)),
	  id_ex_curr->valc, id_ex_curr->vala, id_ex_curr->valb,
	  reg_name(id_ex_curr->srca), reg_name(id_ex_curr->srcb),
	  reg_name(id_ex_curr->deste), reg_name(id_ex_curr->destm),
	  stat_name(id_ex_curr->status));

  sim_log("M: instr = %s, Cnd = %d, valE = 0x%x, valA = 0x%x\n   dstE = %s, dstM = %s, Stat = %s\n",
	  iname(HPACK(ex_mem_curr->icode, ex_mem_curr->ifun)),
	  ex_mem_curr->takebranch,
	  ex_mem_curr->vale, ex_mem_curr->vala,
	  reg_name(ex_mem_curr->deste), reg_name(ex_mem_curr->destm),
	  stat_name(ex_mem_curr->status));

  sim_log("W: instr = %s, valE = 0x%x, valM = 0x%x, dstE = %s, dstM = %s, Stat = %s\n",
	  iname(HPACK(mem_wb_curr->icode, mem_wb_curr->ifun)),
	  mem_wb_curr->vale, mem_wb_curr->valm,
	  reg_name(mem_wb_curr->deste), reg_name(mem_wb_curr->destm),
	  stat_name(mem_wb_curr->status));
}

/* Run pipeline for one cycle */
/* Return status of processor */
/* Max_instr indicates maximum number of instructions that
   want to complete during this simulation run.  */
static byte_t sim_step_pipe(int max_instr, int ccount)
{
    byte_t wb_status = mem_wb_curr->status;
    byte_t mem_status = mem_wb_next->status;
    /* How many instructions are ahead of one in wb / ex? */
    int ahead_mem = (wb_status != STAT_BUB);
    int ahead_ex = ahead_mem + (mem_status != STAT_BUB);
    bool_t update_mem = ahead_mem < max_instr;
    bool_t update_cc = ahead_ex < max_instr;

    /* Update program-visible state */
    update_state(update_mem, update_cc);
    /* Update pipe registers */
    update_pipes();
    tty_report(ccount);
    if (pc_state->op == P_ERROR)
	pc_curr->status = STAT_PIP;
    if (if_id_state->op == P_ERROR)
	if_id_curr->status = STAT_PIP;
    if (id_ex_state->op == P_ERROR)
	id_ex_curr->status = STAT_PIP;
    if (ex_mem_state->op == P_ERROR)
	ex_mem_curr->status = STAT_PIP;
    if (mem_wb_state->op == P_ERROR)
	mem_wb_curr->status = STAT_PIP;
    
    /* Need to do decode after execute & memory stages,
       and memory stage before execute, in order to propagate
       forwarding values properly */
    do_if_stage();
    do_mem_stage();
    do_ex_stage();
    do_id_wb_stages();

    do_stall_check();
#if 0
    /* This doesn't seem necessary */
    if (id_ex_curr->status != STAT_AOK
	&& id_ex_curr->status != STAT_BUB) {
	if_id_state->op = P_BUBBLE;
	id_ex_state->op = P_BUBBLE;
    }
#endif

    /* Performance monitoring */
    if (mem_wb_curr->status != STAT_BUB && mem_wb_curr->icode != I_POP2) {
	starting_up = 0;
	instructions++;
	cycles++;
    } else {
	if (!starting_up)
	    cycles++;
    }
    
    sim_report();
    return status;
}

/*
  Run pipeline until one of following occurs:
  - An error status is encountered in WB.
  - max_instr instructions have completed through WB
  - max_cycle cycles have been simulated

  Return number of instructions executed.
  if statusp nonnull, then will be set to status of final instruction
  if ccp nonnull, then will be set to condition codes of final instruction
*/
int sim_run_pipe(int max_instr, int max_cycle, byte_t *statusp, cc_t *ccp)
{
    int icount = 0;
    int ccount = 0;
    byte_t run_status = STAT_AOK;
    while (icount < max_instr && ccount < max_cycle) {
        run_status = sim_step_pipe(max_instr-icount, ccount);
	if (run_status != STAT_BUB)
	    icount++;
	if (run_status != STAT_AOK && run_status != STAT_BUB)
	    break;
	ccount++;
    }
    if (statusp)
	*statusp = run_status;
    if (ccp)
	*ccp = cc;
    return icount;
}

/* If dumpfile set nonNULL, lots of status info printed out */
void sim_set_dumpfile(FILE *df)
{
    dumpfile = df;
}

/*
 * sim_log dumps a formatted string to the dumpfile, if it exists
 * accepts variable argument list
 */
void sim_log( const char *format, ... ) {
    if (dumpfile) {
	va_list arg;
	va_start( arg, format );
	vfprintf( dumpfile, format, arg );
	va_end( arg );
    }
}


/*************************************************************
 * Part 3: This part contains support for the GUI simulator
 *************************************************************/

#ifdef HAS_GUI

/**********************
 * Begin Part 3 globals	
 **********************/

/* Hack for SunOS */
extern int matherr();
int *tclDummyMathPtr = (int *) matherr;

static char tcl_msg[256];

/* Keep track of the TCL Interpreter */
static Tcl_Interp *sim_interp = NULL;

static mem_t post_load_mem;

/**********************
 * End Part 3 globals	
 **********************/


/******************************************************************************
 *	function declarations
 ******************************************************************************/

int simResetCmd(ClientData clientData, Tcl_Interp *interp,
		int argc, char *argv[]);

int simLoadCodeCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[]);

int simLoadDataCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[]);

int simRunCmd(ClientData clientData, Tcl_Interp *interp,
	      int argc, char *argv[]);

int simModeCmd(ClientData clientData, Tcl_Interp *interp,
	       int argc, char *argv[]);

void addAppCommands(Tcl_Interp *interp);


/******************************************************************************
 *	tcl command definitions
 ******************************************************************************/

/* Implement command versions of the simulation functions */
int simResetCmd(ClientData clientData, Tcl_Interp *interp,
		int argc, char *argv[])
{
    sim_interp = interp;
    if (argc != 1) {
	interp->result = "No arguments allowed";
	return TCL_ERROR;
    }
    sim_reset();
    if (post_load_mem) {
	free_mem(mem);
	mem = copy_mem(post_load_mem);
    }
    interp->result = stat_name(STAT_AOK);
    return TCL_OK;
}

int simLoadCodeCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[])
{
    FILE *code_file;
    int code_count;
    sim_interp = interp;
    if (argc != 2) {
	interp->result = "One argument required";
	return TCL_ERROR;
    }
    code_file = fopen(argv[1], "r");
    if (!code_file) {
	sprintf(tcl_msg, "Couldn't open code file '%s'", argv[1]);
	interp->result = tcl_msg;
	return TCL_ERROR;
    }
    sim_reset();
    code_count = load_mem(mem, code_file, 0);
    post_load_mem = copy_mem(mem);
    sprintf(tcl_msg, "%d", code_count);
    interp->result = tcl_msg;
    fclose(code_file);
    return TCL_OK;
}

int simLoadDataCmd(ClientData clientData, Tcl_Interp *interp,
		   int argc, char *argv[])
{
    FILE *data_file;
    int word_count = 0;
    interp->result = "Not implemented";
    return TCL_ERROR;


    sim_interp = interp;
    if (argc != 2) {
	interp->result = "One argument required";
	return TCL_ERROR;
    }
    data_file = fopen(argv[1], "r");
    if (!data_file) {
	sprintf(tcl_msg, "Couldn't open data file '%s'", argv[1]);
	interp->result = tcl_msg;
	return TCL_ERROR;
    }
    sprintf(tcl_msg, "%d", word_count);
    interp->result = tcl_msg;
    fclose(data_file);
    return TCL_OK;
}


int simRunCmd(ClientData clientData, Tcl_Interp *interp,
	      int argc, char *argv[])
{
    int cycle_limit = 1;
    byte_t status;
    cc_t cc;
    sim_interp = interp;
    if (argc > 2) {
	interp->result = "At most one argument allowed";
	return TCL_ERROR;
    }
    if (argc >= 2 &&
	(sscanf(argv[1], "%d", &cycle_limit) != 1 ||
	 cycle_limit < 0)) {
	sprintf(tcl_msg, "Cannot run for '%s' cycles!", argv[1]);
	interp->result = tcl_msg;
	return TCL_ERROR;
    }
    sim_run_pipe(cycle_limit + 5, cycle_limit, &status, &cc);
    interp->result = stat_name(status);
    return TCL_OK;
}

int simModeCmd(ClientData clientData, Tcl_Interp *interp,
	       int argc, char *argv[])
{
    sim_interp = interp;
    if (argc != 2) {
	interp->result = "One argument required";
	return TCL_ERROR;
    }
    interp->result = argv[1];
    if (strcmp(argv[1], "wedged") == 0)
	sim_mode = S_WEDGED;
    else if (strcmp(argv[1], "stall") == 0)
	sim_mode = S_STALL;
    else if (strcmp(argv[1], "forward") == 0)
	sim_mode = S_FORWARD;
    else {
	sprintf(tcl_msg, "Unknown mode '%s'", argv[1]);
	interp->result = tcl_msg;
	return TCL_ERROR;
    }
    return TCL_OK;
}


/******************************************************************************
 *	registering the commands with tcl
 ******************************************************************************/

void addAppCommands(Tcl_Interp *interp)
{
    sim_interp = interp;
    Tcl_CreateCommand(interp, "simReset", (Tcl_CmdProc *) simResetCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateCommand(interp, "simCode", (Tcl_CmdProc *) simLoadCodeCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateCommand(interp, "simData", (Tcl_CmdProc *) simLoadDataCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateCommand(interp, "simRun", (Tcl_CmdProc *) simRunCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateCommand(interp, "setSimMode", (Tcl_CmdProc *) simModeCmd,
		      (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL);
} 

/******************************************************************************
 *	tcl functionality called from within C
 ******************************************************************************/

/* Provide mechanism for simulator to update register display */
void signal_register_update(reg_id_t r, word_t val) {
    int code;
    sprintf(tcl_msg, "setReg %d %d 1", (int) r, (int) val);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to signal register set\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Provide mechanism for simulator to generate memory display */
void create_memory_display() {
    int code;
    sprintf(tcl_msg, "createMem %d %d", minAddr, memCnt);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Command '%s' failed\n", tcl_msg);
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    } else {
	int i;
	for (i = 0; i < memCnt && code == TCL_OK; i+=4) {
	    int addr = minAddr+i;
	    int val;
	    if (!get_word_val(mem, addr, &val)) {
		fprintf(stderr, "Out of bounds memory display\n");
		return;
	    }
	    sprintf(tcl_msg, "setMem %d %d", addr, val);
	    code = Tcl_Eval(sim_interp, tcl_msg);
	}
	if (code != TCL_OK) {
	    fprintf(stderr, "Couldn't set memory value\n");
	    fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
	}
    }
}

/* Provide mechanism for simulator to update memory value */
void set_memory(int addr, int val) {
    int code;
    int nminAddr = minAddr;
    int nmemCnt = memCnt;

    /* First see if we need to expand memory range */
    if (memCnt == 0) {
	nminAddr = addr;
	memCnt = 4;
    } else if (addr < minAddr) {
	nminAddr = addr;
	nmemCnt = minAddr + memCnt - addr;
    } else if (addr >= minAddr+memCnt) {
	nmemCnt = addr-minAddr+4;
    }
    /* Now make sure nminAddr & nmemCnt are multiples of 16 */
    nmemCnt = ((nminAddr & 0xF) + nmemCnt + 0xF) & ~0xF;
    nminAddr = nminAddr & ~0xF;

    if (nminAddr != minAddr || nmemCnt != memCnt) {
	minAddr = nminAddr;
	memCnt = nmemCnt;
	create_memory_display();
    } else {
	sprintf(tcl_msg, "setMem %d %d", addr, val);
	code = Tcl_Eval(sim_interp, tcl_msg);
	if (code != TCL_OK) {
	    fprintf(stderr, "Couldn't set memory value 0x%x to 0x%x\n",
		    addr, val);
	    fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
	}
    }
}

/* Provide mechanism for simulator to update condition code display */
void show_cc(cc_t cc)
{
    int code;
    sprintf(tcl_msg, "setCC %d %d %d",
	    GET_ZF(cc), GET_SF(cc), GET_OF(cc));
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to display condition codes\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Provide mechanism for simulator to update status display */
void show_stat(stat_t stat)
{
    int code;
    sprintf(tcl_msg, "showStat %s", stat_name(stat));
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to display status\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}



/* Provide mechanism for simulator to update performance information */
void show_cpi() {
    int code;
    double cpi = instructions > 0 ? (double) cycles/instructions : 1.0;
    sprintf(tcl_msg, "showCPI %d %d %.2f",
	    cycles, instructions, (double) cpi);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to display CPI\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

char *rname[] = {"none", "ea", "eb", "me", "wm", "we"};

/* provide mechanism for simulator to specify source registers */
void signal_sources() {
    int code;
    sprintf(tcl_msg, "showSources %s %s",
	    rname[amux], rname[bmux]);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to signal forwarding sources\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Provide mechanism for simulator to clear register display */
void signal_register_clear() {
    int code;
    code = Tcl_Eval(sim_interp, "clearReg");
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to signal register clear\n");
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Provide mechanism for simulator to report instructions as they are 
   read in
*/

void report_line(int line_no, int addr, char *hex, char *text) {
    int code;
    sprintf(tcl_msg, "addCodeLine %d %d {%s} {%s}", line_no, addr, hex, text);
    code = Tcl_Eval(sim_interp, tcl_msg);
    if (code != TCL_OK) {
	fprintf(stderr, "Failed to report code line 0x%x\n", addr);
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}


/* Provide mechanism for simulator to report which instructions are in
   which stages */
void report_pc(unsigned fpc, unsigned char fpcv,
	       unsigned dpc, unsigned char dpcv,
	       unsigned epc, unsigned char epcv,
	       unsigned mpc, unsigned char mpcv,
	       unsigned wpc, unsigned char wpcv)
{
    int status;
    char addr[10];
    char code[12];
    Tcl_DString cmd;
    Tcl_DStringInit(&cmd);
    Tcl_DStringAppend(&cmd, "simLabel ", -1);
    Tcl_DStringStartSublist(&cmd);
    if (fpcv) {
	sprintf(addr, "%u", fpc);
	Tcl_DStringAppendElement(&cmd, addr);
    }
    if (dpcv) {
	sprintf(addr, "%u", dpc);
	Tcl_DStringAppendElement(&cmd, addr);
    }
    if (epcv) {
	sprintf(addr, "%u", epc);
	Tcl_DStringAppendElement(&cmd, addr);
    }
    if (mpcv) {
	sprintf(addr, "%u", mpc);
	Tcl_DStringAppendElement(&cmd, addr);
    }
    if (wpcv) {
	sprintf(addr, "%u", wpc);
	Tcl_DStringAppendElement(&cmd, addr);
    }
    Tcl_DStringEndSublist(&cmd);
    Tcl_DStringStartSublist(&cmd);
    sprintf(code, "%s %s %s %s %s",
	    fpcv ? "F" : "",
	    dpcv ? "D" : "",
	    epcv ? "E" : "",
	    mpcv ? "M" : "",
	    wpcv ? "W" : "");
    Tcl_DStringAppend(&cmd, code, -1);
    Tcl_DStringEndSublist(&cmd);
    /* Debug 
       fprintf(stderr, "Code '%s'\n", Tcl_DStringValue(&cmd));
    */
    status = Tcl_Eval(sim_interp, Tcl_DStringValue(&cmd));
    if (status != TCL_OK) {
	fprintf(stderr, "Failed to report pipe code '%s'\n", code);
	fprintf(stderr, "Error Message was '%s'\n", sim_interp->result);
    }
}

/* Report single line of pipeline state */
void report_state(char *id, int current, char *txt)
{
    int status;
    sprintf(tcl_msg, "updateStage %s %d {%s}", id, current,txt);
    status = Tcl_Eval(sim_interp, tcl_msg);
    if (status != TCL_OK) {
	fprintf(stderr, "Failed to report pipe status\n");
	fprintf(stderr, "\tStage %s.%s, status '%s'\n",
		id, current ? "current" : "next", txt);
	fprintf(stderr, "\tError Message was '%s'\n", sim_interp->result);
    }
}


/*
 * Tcl_AppInit - Called by TCL to perform application-specific initialization.
 */
int Tcl_AppInit(Tcl_Interp *interp)
{
    /* Tell TCL about the name of the simulator so it can  */
    /* use it as the title of the main window */
    Tcl_SetVar(interp, "simname", simname, TCL_GLOBAL_ONLY);

    if (Tcl_Init(interp) == TCL_ERROR)
	return TCL_ERROR;
    if (Tk_Init(interp) == TCL_ERROR)
	return TCL_ERROR;
    Tcl_StaticPackage(interp, "Tk", Tk_Init, Tk_SafeInit);

    /* Call procedure to add new commands */
    addAppCommands(interp);

    /*
     * Specify a user-specific startup file to invoke if the application
     * is run interactively.  Typically the startup file is "~/.apprc"
     * where "app" is the name of the application.  If this line is deleted
     * then no user-specific startup file will be run under any conditions.
     */
    Tcl_SetVar(interp, "tcl_rcFileName", "~/.wishrc", TCL_GLOBAL_ONLY);
    return TCL_OK;

}

#endif /* HAS_GUI */


/**************************************************************
 * Part 4: Code for implementing pipelined processor simulators
 *************************************************************/

/******************************************************************************
 *	defines
 ******************************************************************************/

#define MAX_STAGE 10

/******************************************************************************
 *	static variables
 ******************************************************************************/

static pipe_ptr pipes[MAX_STAGE];
static int pipe_count = 0;

/******************************************************************************
 *	function definitions
 ******************************************************************************/

/* Create new pipe with count bytes of state */
/* bubble_val indicates state corresponding to pipeline bubble */
pipe_ptr new_pipe(int count, void *bubble_val)
{
  pipe_ptr result = (pipe_ptr) malloc(sizeof(pipe_ele));
  result->current = malloc(count);
  result->next = malloc(count);
  memcpy(result->current, bubble_val, count);
  memcpy(result->next, bubble_val, count);
  result->count = count;
  result->op = P_LOAD;
  result->bubble_val = bubble_val;
  pipes[pipe_count++] = result; 
  return result;
}

/* Update all pipes */
void update_pipes()
{
  int s;
  for (s = 0; s < pipe_count; s++) {
    pipe_ptr p = pipes[s];
    switch (p->op)
      {
      case P_BUBBLE:
      	/* insert a bubble into the next stage */
      	memcpy(p->current, p->bubble_val, p->count);
      	break;
      
      case P_LOAD:
      	/* copy calculated state from previous stage */
      	memcpy(p->current, p->next, p->count);
      	break;
      case P_ERROR:
	  /* Like a bubble, but insert error condition */
      	memcpy(p->current, p->bubble_val, p->count);
      	break;
      case P_STALL:
      default:
      	/* do nothing: next stage gets same instr again */
      	;
      }
    if (p->op != P_ERROR)
	p->op = P_LOAD;
  }
}

/* Set all pipes to bubble values */
void clear_pipes()
{
  int s;
  for (s = 0; s < pipe_count; s++) {
    pipe_ptr p = pipes[s];
    memcpy(p->current, p->bubble_val, p->count);
    memcpy(p->next, p->bubble_val, p->count);
    p->op = P_LOAD;
  }
}

/******************** Utility Code *************************/

/* Representations of digits */
static char digits[16] =
   {'0', '1', '2', '3', '4', '5', '6', '7',
    '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'};

/* Print hex/oct/binary format with leading zeros */
/* bpd denotes bits per digit  Should be in range 1-4,
   pbw denotes bits per word.*/
void wprint(unsigned x, int bpd, int bpw, FILE *fp)
{
  int digit;
  unsigned mask = (1 << bpd) - 1;
  for (digit = (bpw-1)/bpd; digit >= 0; digit--) {
    unsigned val = (x >> (digit * bpd)) & mask;
    putc(digits[val], fp);
  }
}

/* Create string in hex/oct/binary format with leading zeros */
/* bpd denotes bits per digit  Should be in range 1-4,
   pbw denotes bits per word.*/
void wstring(unsigned x, int bpd, int bpw, char *str)
{
  int digit;
  unsigned mask = (1 << bpd) - 1;
  for (digit = (bpw-1)/bpd; digit >= 0; digit--) {
    unsigned val = (x >> (digit * bpd)) & mask;
    *str++ = digits[val];
  }
  *str = '\0';
}


/********************************
 * Part 5: Stage implementations
 *********************************/

/*************** Bubbled version of stages *************/

pc_ele bubble_pc = {0,STAT_AOK};
if_id_ele bubble_if_id = { I_NOP, 0, REG_NONE,REG_NONE,
			   0, 0, STAT_BUB, 0};
id_ex_ele bubble_id_ex = { I_NOP, 0, 0, 0, 0,
			   REG_NONE, REG_NONE, REG_NONE, REG_NONE,
			   STAT_BUB, 0};

ex_mem_ele bubble_ex_mem = { I_NOP, 0, FALSE, 0, 0,
			     REG_NONE, REG_NONE, STAT_BUB, 0};

mem_wb_ele bubble_mem_wb = { I_NOP, 0, 0, 0, REG_NONE, REG_NONE,
			     STAT_BUB, 0};

/*************** Stage Implementations *****************/

int gen_f_pc();
int gen_need_regids();
int gen_need_valC();
int gen_instr_valid();
int gen_f_predPC();
int gen_f_icode();
int gen_f_ifun();
int gen_f_stat();
int gen_instr_valid();

void do_if_stage()
{
    byte_t instr = HPACK(I_NOP, F_NONE);
    byte_t regids = HPACK(REG_NONE, REG_NONE);
    word_t valc = 0;
    word_t valp = f_pc = gen_f_pc();

    /* Ready to fetch instruction.  Speculatively fetch register byte
       and immediate word
    */
    imem_error = !get_byte_val(mem, valp, &instr);
    imem_icode = HI4(instr);
    imem_ifun = LO4(instr);
    if (!imem_error) {
      byte_t junk;
      /* Make sure can read maximum length instruction */
      imem_error = !get_byte_val(mem, valp+5, &junk);
    }
    if_id_next->icode = gen_f_icode();
    if_id_next->ifun  = gen_f_ifun();
    if (!imem_error) {
	sim_log("\tFetch: f_pc = 0x%x, imem_instr = %s, f_instr = %s\n",
		f_pc, iname(instr),
		iname(HPACK(if_id_next->icode, if_id_next->ifun)));
    }

    instr_valid = gen_instr_valid();
    if (!instr_valid) 
      sim_log("\tFetch: Instruction code 0x%x invalid\n", instr);
    if_id_next->status = gen_f_stat();

    valp++;
    if (gen_need_regids()) {
	get_byte_val(mem, valp, &regids);
	valp ++;
    }
    if_id_next->ra = HI4(regids);
    if_id_next->rb = LO4(regids);
    if (gen_need_valC()) {
	get_word_val(mem, valp, &valc);
	valp+= 4;
    }
    if_id_next->valp = valp;
    if_id_next->valc = valc;

    pc_next->pc = gen_f_predPC();

    pc_next->status = (if_id_next->status == STAT_AOK) ? STAT_AOK : STAT_BUB;

    if_id_next->stage_pc = f_pc;
}

int gen_d_srcA();
int gen_d_srcB();
int gen_d_dstE();
int gen_d_dstM();
int gen_d_valA();
int gen_d_valB();
int gen_w_dstE();
int gen_w_valE();
int gen_w_dstM();
int gen_w_valM();
int gen_Stat();

/* Implements both ID and WB */
void do_id_wb_stages()
{
    /* Set up write backs.  Don't occur until end of cycle */
    wb_destE = gen_w_dstE();
    wb_valE = gen_w_valE();
    wb_destM = gen_w_dstM();
    wb_valM = gen_w_valM();

    /* Update processor status */
    status = gen_Stat();

    id_ex_next->srca = gen_d_srcA();
    id_ex_next->srcb = gen_d_srcB();
    id_ex_next->deste = gen_d_dstE();
    id_ex_next->destm = gen_d_dstM();

    /* Read the registers */
    d_regvala = get_reg_val(reg, id_ex_next->srca);
    d_regvalb = get_reg_val(reg, id_ex_next->srcb);

    /* Do forwarding and valA selection */
    id_ex_next->vala = gen_d_valA();
    id_ex_next->valb = gen_d_valB();

    id_ex_next->icode = if_id_curr->icode;
    id_ex_next->ifun = if_id_curr->ifun;
    id_ex_next->valc = if_id_curr->valc;
    id_ex_next->stage_pc = if_id_curr->stage_pc;
    id_ex_next->status = if_id_curr->status;
}

int gen_alufun();
int gen_set_cc();
int gen_Bch();
int gen_aluA();
int gen_aluB();
int gen_e_valA();
int gen_e_dstE();

void do_ex_stage()
{
    alu_t alufun = gen_alufun();
    bool_t setcc = gen_set_cc();
    word_t alua, alub;

    alua = gen_aluA();
    alub = gen_aluB();

    e_bcond = 	cond_holds(cc, id_ex_curr->ifun);
    
    ex_mem_next->takebranch = e_bcond;

    if (id_ex_curr->icode == I_JMP)
      sim_log("\tExecute: instr = %s, cc = %s, branch %staken\n",
	      iname(HPACK(id_ex_curr->icode, id_ex_curr->ifun)),
	      cc_name(cc),
	      ex_mem_next->takebranch ? "" : "not ");
    
    /* Perform the ALU operation */
    word_t aluout = compute_alu(alufun, alua, alub);
    ex_mem_next->vale = aluout;
    sim_log("\tExecute: ALU: %c 0x%x 0x%x --> 0x%x\n",
	    op_name(alufun), alua, alub, aluout);

    if (setcc) {
	cc_in = compute_cc(alufun, alua, alub);
	sim_log("\tExecute: New cc = %s\n", cc_name(cc_in));
    }

    ex_mem_next->icode = id_ex_curr->icode;
    ex_mem_next->ifun = id_ex_curr->ifun;
    ex_mem_next->vala = gen_e_valA();
    ex_mem_next->deste = gen_e_dstE();
    ex_mem_next->destm = id_ex_curr->destm;
    ex_mem_next->srca = id_ex_curr->srca;
    ex_mem_next->status = id_ex_curr->status;
    ex_mem_next->stage_pc = id_ex_curr->stage_pc;
}

/* Functions defined using HCL */
int gen_mem_addr();
int gen_mem_read();
int gen_mem_write();
int gen_m_stat();

void do_mem_stage()
{
    bool_t read = gen_mem_read();

    word_t valm = 0;

    mem_addr = gen_mem_addr();
    mem_data = ex_mem_curr->vala;
    mem_write = gen_mem_write();
    dmem_error = FALSE;

    if (read) {
	dmem_error = dmem_error || !get_word_val(mem, mem_addr, &valm);
	if (!dmem_error)
	  sim_log("\tMemory: Read 0x%x from 0x%x\n",
		  valm, mem_addr);
    }
    if (mem_write) {
	word_t sink;
	/* Do a read of address just to check validity */
	dmem_error = dmem_error || !get_word_val(mem, mem_addr, &sink);
	if (dmem_error)
	  sim_log("\tMemory: Invalid address 0x%x\n",
		  mem_addr);
    }
    mem_wb_next->icode = ex_mem_curr->icode;
    mem_wb_next->ifun = ex_mem_curr->ifun;
    mem_wb_next->vale = ex_mem_curr->vale;
    mem_wb_next->valm = valm;
    mem_wb_next->deste = ex_mem_curr->deste;
    mem_wb_next->destm = ex_mem_curr->destm;
    mem_wb_next->status = gen_m_stat();
    mem_wb_next->stage_pc = ex_mem_curr->stage_pc;
}

/* Set stalling conditions for different stages */

int gen_F_stall(), gen_F_bubble();
int gen_D_stall(), gen_D_bubble();
int gen_E_stall(), gen_E_bubble();
int gen_M_stall(), gen_M_bubble();
int gen_W_stall(), gen_W_bubble();

p_stat_t pipe_cntl(char *name, int stall, int bubble)
{
    if (stall) {
	if (bubble) {
	    sim_log("%s: Conflicting control signals for pipe register\n",
		    name);
	    return P_ERROR;
	} else 
	    return P_STALL;
    } else {
	return bubble ? P_BUBBLE : P_LOAD;
    }
}

void do_stall_check()
{
    pc_state->op = pipe_cntl("PC", gen_F_stall(), gen_F_bubble());
    if_id_state->op = pipe_cntl("ID", gen_D_stall(), gen_D_bubble());
    id_ex_state->op = pipe_cntl("EX", gen_E_stall(), gen_E_bubble());
    ex_mem_state->op = pipe_cntl("MEM", gen_M_stall(), gen_M_bubble());
    mem_wb_state->op = pipe_cntl("WB", gen_W_stall(), gen_W_bubble());
}



sim/pipe/pipe.tcl0000700005644400000240000004513111336241741012550 0ustar  tmsgrad##########################################################################
# Parsing of command line flags                                          #
##########################################################################

proc flagVal {flag default} {
    global argv
    foreach t $argv {
	if {[string match "-$flag*" $t]} {return [string range $t 2 end]}
    }
    return $default
}

proc findFlag {flag} {
    global argv
    foreach t $argv {
	if {[string match "-$flag" $t]} {return 1}
    }
    return 0
}

##########################################################################
# Register File Implementation.  Shown as array of 8 columns             #
##########################################################################


# Font used to display register contents
set fontSize [expr 10 * [flagVal "f" 12]]
set codeFontSize [expr 10 * [flagVal "c" 10]]
set labFontSize [expr 10 * [flagVal "l" 10]]
set bigFontSize [expr 10 * [flagVal "b" 16]]
set dpyFont "*-courier-medium-r-normal--*-$fontSize-*-*-*-*-*-*"
set labFont "*-helvetica-medium-r-normal--*-$labFontSize-*-*-*-*-*-*"
set bigLabFont "*-helvetica-bold-r-normal--*-$bigFontSize-*-*-*-*-*-*"
set codeFont "*-courier-medium-r-normal--*-$codeFontSize-*-*-*-*-*-*"
# Background Color of normal register
set normalBg white
# Background Color of highlighted register
set specialBg LightSkyBlue

# Height of titles separating major sections of control panel
set sectionHeight 2


# How many rows of code do I display
set codeRowCount [flagVal "r" 50]

# Keep track of previous highlighted register
set lastId -1
proc setReg {id val highlight} {
    global lastId normalBg specialBg
    if {$lastId >= 0} {
	.r.reg$lastId config -bg $normalBg
	set lastId -1
    }
    if {$id < 0 || $id >= 8} {
	error "Invalid Register ($id)"
    }
    .r.reg$id config -text [format %8x $val]
    if {$highlight} {
	uplevel .r.reg$id config -bg $specialBg
	set lastId $id
    }
}

# Clear all registers
proc clearReg {} {
    global lastId normalBg
    if {$lastId >= 0} {
	.r.reg$lastId config -bg $normalBg
	set lastId -1
    } 
    for {set i 0} {$i < 8} {incr i 1} {
	.r.reg$i config -text ""
    }
}

# Set all 3 condition codes
proc setCC {zv cv ov} {
    .cc.cc0 config -text [format %d $zv]
    .cc.cc1 config -text [format %d $cv]
    .cc.cc2 config -text [format %d $ov]
}

# Set CPI display
proc showCPI {cycles instructions cpi} {
    .cpi.cyc config -text [format %d $cycles]
    .cpi.instr config -text [format %d $instructions]
    .cpi.cpi config -text [format %.2f $cpi]
}

# Set status display
proc showStat {s} {
    .stat.val config -text $s
}

##############################################################################
# CPI Display
##############################################################################
# Create Window for CPI display 
frame .cpi
pack .cpi -in . -side bottom

label .cpi.lab -text "Performance" -font $bigLabFont -height $sectionHeight
pack .cpi.lab -in .cpi -side left

label .cpi.clab -text "Cycles" -font $labFont
pack .cpi.clab -in .cpi -side left
label .cpi.cyc -text "0" -width 4 -font $dpyFont -relief ridge -bg $normalBg
pack .cpi.cyc -in .cpi -side left

label .cpi.ilab -text "Instructions" -font $labFont
pack .cpi.ilab -in .cpi -side left
label .cpi.instr -text "0" -width 4 -font $dpyFont -relief ridge -bg $normalBg
pack .cpi.instr -in .cpi -side left

label .cpi.cpilab -text "CPI" -font $labFont
pack .cpi.cpilab -in .cpi -side left
label .cpi.cpi -text "1.0" -width 5 -font $dpyFont -relief ridge -bg $normalBg
pack .cpi.cpi -in .cpi -side left

##############################################################################
# Status Display                                                             #
##############################################################################
# Create Window for processor status (packed next to condition codes)
frame .stat
pack .stat -in . -side bottom

label .stat.lab -text "Stat"  -width 7 -font $bigLabFont -height $sectionHeight
label .stat.val -width 3 -font $dpyFont -relief ridge -bg $normalBg
label .stat.fill -width 6 -text ""
pack .stat.lab .stat.val .stat.fill -in .stat -side left


##############################################################################
# Condition Code Display                                                     #
##############################################################################
# Create Window for condition codes
frame .cc
pack .cc -in .stat -side left

label .cc.lab -text "Condition Codes"  -font $bigLabFont -height $sectionHeight
pack .cc.lab -in .cc -side left


set ccnames [list "Z" "S" "O"]

# Create Row of CC Labels
for {set i 0} {$i < 3} {incr i 1} {
    label .cc.lab$i -width 1 -font $dpyFont -text [lindex $ccnames $i]
    pack .cc.lab$i -in .cc -side left
    label .cc.cc$i -width 1 -font $dpyFont -relief ridge -bg $normalBg
    pack .cc.cc$i -in .cc -side left
}

##############################################################################
# Register Display                                                           #     
##############################################################################


# Create Window for registers
frame .r
pack .r -in . -side bottom
# Following give separate window for register file
# toplevel .r
# wm title .r "Register File" -font $bigLabFont
label .r.lab -text "Register File"  -font $bigLabFont -height $sectionHeight
pack .r.lab -in .r -side top
# Set up top row control panel (disabled)
# frame .r.cntl
# pack .r.cntl -fill x -in .r
# label .r.labreg -text "Register" -width 10
# entry .r.regid -width 3 -relief sunken -textvariable regId -font $dpyFont
# label .r.labval -text "Value" -width 10
# entry .r.regval -width 8 -relief sunken -textvariable regVal -font $dpyFont
# button .r.doset -text "Set" -command {setReg $regId $regVal 1} -width 6
# button .r.c -text "Clear" -command clearReg -width 6
# pack .r.labreg .r.regid .r.labval .r.regval .r.doset .r.c  -in .r.cntl -side left

set regnames [list "%eax" "%ecx" "%edx" "%ebx" "%esp" "%ebp" "%esi" "%edi"]

# Create Row of Register Labels
frame .r.labels
pack .r.labels -side top -in .r

for {set i 0} {$i < 8} {incr i 1} {
    label .r.lab$i -width 8 -font $dpyFont -text [lindex $regnames $i]
    pack .r.lab$i -in .r.labels -side left
}

# Create Row of Register Entries
frame .r.row
pack .r.row -side top -in .r


# Create 8 registers
for {set i 0} {$i < 8} {incr i 1} {
    label .r.reg$i -width 8 -font $dpyFont -relief ridge \
	    -bg $normalBg
    pack .r.reg$i -in .r.row -side left
}


##############################################################################
#  Main Control Panel                                                        #
##############################################################################
#
# Set the simulator name (defined in simname in ssim.c) 
# as the title of the main window
#
wm title . $simname

# Control Panel for simulator
set cntlBW 9
frame .cntl
pack .cntl
button .cntl.quit -width $cntlBW -text Quit -command exit
button .cntl.run -width $cntlBW -text Go -command simGo
button .cntl.stop -width $cntlBW -text Stop -command simStop
button .cntl.step -width $cntlBW -text Step -command simStep
button .cntl.reset -width $cntlBW -text Reset -command simResetAll
pack .cntl.quit .cntl.run .cntl.stop .cntl.step .cntl.reset -in .cntl -side left
# Simulation speed control
scale .spd -label {Simulator Speed (10*log Hz)} -from -10 -to 30 -length 10c \
  -orient horizontal -command setSpeed
pack .spd

# Simulation mode 
set simMode forward

frame .md
### Old Simulation mode stuff
#pack .md
#radiobutton .md.wedged -text Wedged -variable simMode \
#	-value wedged -width 10 -command {setSimMode wedged}
#radiobutton .md.stall -text Stall -variable simMode \
#	-value stall -width 10 -command {setSimMode stall}
#radiobutton .md.forward -text Forward -variable simMode \
#	-value forward -width 10 -command {setSimMode forward}
#pack .md.wedged .md.stall .md.forward -in .md -side left


# simDelay defines number of milliseconds for each cycle of simulator
# Initial value is 1000ms
set simDelay 1000
# Set delay based on rate expressed in log(Hz)
proc setSpeed {rate} {
  global simDelay
  set simDelay [expr round(1000 / pow(10,$rate/10.0))]
}

# Global variables controlling simulator execution
# Should simulator be running now?
set simGoOK 0

proc simStop  {} {
  global simGoOK
  set simGoOK 0
}

proc simStep {} {
    global simStat
    set simStat [simRun 1]
}

proc simGo {} {
    global simGoOK simDelay simStat
    set simGoOK 1
    # Disable the Go and Step buttons
    # Enable the Stop button
    while {$simGoOK} {
	# run the simulator 1 cycle
	after $simDelay
	set simStat [simRun 1]
	if {$simStat != "AOK" && $simStat != "BUB"} {set simGoOK 0}
	update
    }
    # Disable the Stop button
    # Enable the Go and Step buttons
}

##############################################################################
#  Pipe Register Display                                                     #
##############################################################################

# Colors for Highlighting Data Sources
set valaBg LightPink
set valbBg PaleGreen1

# Overall width of pipe register display
set pipeWidth 55
set pipeHeight 2
set labWidth 5

# Add labeled display to window 
proc addDisp {win width name} {
    global dpyFont labFont
    set lname [string tolower $name]
    frame $win.$lname
    pack $win.$lname -in $win -side left
    label $win.$lname.t -text $name -font $labFont
    label $win.$lname.n -width $width -font $dpyFont -bg lightgray -fg Black
    label $win.$lname.c -width $width -font $dpyFont -bg white -relief ridge
    pack $win.$lname.t $win.$lname.c $win.$lname.n -in $win.$lname -side top
    return [list $win.$lname.n $win.$lname.c]
}

# Set text in display row
proc setDisp {wins txts} {
    for {set i 0} {$i < [llength $wins] && $i < [llength $txts]} {incr i} {
	set win [lindex $wins $i]
	set txt [lindex $txts $i]
	$win config -text $txt
    }
}

frame .p -width $pipeWidth 
pack .p -in . -side bottom
label .p.lab -text "Pipeline Registers" -font $bigLabFont -height $sectionHeight
pack .p.lab -in .p -side top
label .p.mem -text "Memory Stage" -height $pipeHeight -width $pipeWidth -bg NavyBlue -fg White -font $bigLabFont
label .p.ex -text "Execute Stage" -height $pipeHeight -width $pipeWidth -bg NavyBlue -fg White -font $bigLabFont
label .p.id -text "Decode Stage" -height $pipeHeight -width $pipeWidth -bg NavyBlue -fg White -font $bigLabFont
label .p.if -text "Fetch Stage" -height $pipeHeight -width $pipeWidth -bg NavyBlue -fg White -font $bigLabFont
frame .p.mw 
frame .p.em
frame .p.de
frame .p.fd
frame .p.pc
frame .p.e
pack .p.mw .p.mem .p.em .p.ex .p.e .p.de .p.id .p.fd .p.if .p.pc -in .p -side top -anchor w -expand 1

proc addLabel { win nstage cstage } {
    global labWidth labFont bigLabFont
    frame $win.lab
    label $win.name -text "$cstage" -width $labWidth -font $bigLabFont
    pack $win.name -in $win.lab -side left

    label $win.lab.t  -text " " -font $labFont 
    label $win.lab.n -width $labWidth  -text "Input" -anchor w
    label $win.lab.c -width $labWidth  -text "State" -anchor w
    pack  $win.lab.t $win.lab.c $win.lab.n -in $win.lab -side top
    pack $win.lab -in $win -side left
}

addLabel .p.mw M W
addLabel .p.em E M
addLabel .p.de D E
addLabel .p.fd F D
addLabel .p.pc "" F

proc addFill { win w } {
    frame $win.fill
    label $win.fill.t -text "" -width $w -bg lightgray
    label $win.fill.n -bg white -text "" -width $w -bg lightgray
    label $win.fill.c -bg white -text "" -width $w -bg lightgray
    pack $win.fill.c $win.fill.t $win.fill.n -in $win.fill -side top -expand 1
    pack $win.fill -in $win -side right -expand 1
}

addFill .p.mw 0
addFill .p.de 0
addFill .p.fd 0
addFill .p.pc 0

# Take list of lists, and transpose nesting
# Assumes all lists are of same length
proc ltranspose {inlist} {
    set result {}
    for {set i 0} {$i < [llength [lindex $inlist 0]]} {incr i} {
	set nlist {}
	for {set j 0} {$j < [llength $inlist]} {incr j} {
	    set ele [lindex [lindex $inlist $j] $i]
	    set nlist [concat $nlist [list $ele]]
	}
	set result [concat $result [list $nlist]]
    }
    return $result
}

# Fields in F display
# Total size = 3+8 = 11
set pwins(F) [ltranspose [list [addDisp .p.pc 3 Stat] \
                                [addDisp .p.pc 8 predPC]]]

# Fields in D display
# Total size = 3+6+8+4+4+8 = 33
set pwins(D) [ltranspose \
           [list [addDisp .p.fd 3 Stat]   \
	         [addDisp .p.fd 6 Instr] \
	         [addDisp .p.fd 4 rA] \
	         [addDisp .p.fd 4 rB] \
                 [addDisp .p.fd 8 valC] \
		 [addDisp .p.fd 8 valP]]] 

# Fields in E Display
# Total size = 3+6+8+4+8+4+8+4+4 = 49
set pwins(E) [ltranspose \
           [list [addDisp .p.de 3 Stat] \
	         [addDisp .p.de 6 Instr] \
		 [addDisp .p.de 8 valC] \
		 [addDisp .p.de 8 valA] \
		 [addDisp .p.de 8 valB] \
		 [addDisp .p.de 4 dstE] \
		 [addDisp .p.de 4 dstM] \
		 [addDisp .p.de 4 srcA] \
		 [addDisp .p.de 4 srcB]]]

# Fields in M Display
# Total size = 3+6+3+4+8+4+8 = 36
set pwins(M) [ltranspose \
           [list [addDisp .p.em 3 Stat] \
	         [addDisp .p.em 6 Instr] \
	         [addDisp .p.em 3 Cnd] \
		 [addDisp .p.em 8 valE] \
		 [addDisp .p.em 8 valA] \
		 [addDisp .p.em 4 dstE] \
		 [addDisp .p.em 4 dstM]]]
# Fields in W display
# Total size = 3+6+4+8+4+8 = 33
set pwins(W) [ltranspose \
           [list [addDisp .p.mw 3 Stat] \
	         [addDisp .p.mw 6 Instr] \
		 [addDisp .p.mw 8 valE] \
		 [addDisp .p.mw 8 valM] \
		 [addDisp .p.mw 4 dstE] \
		 [addDisp .p.mw 4 dstM]]]

# update status line for specified pipe register
proc updateStage {name current txts} {
    set Name [string toupper $name]
    global pwins
    set wins [lindex $pwins($Name) $current]
    setDisp $wins $txts
}   

# Create Array of windows corresponding to data sources
set rwins(wm) .p.mw.valm.c
set rwins(we) .p.mw.vale.c
set rwins(me) .p.em.vale.c
set rwins(ea) .p.de.vala.c
set rwins(eb) .p.de.valb.c

# Highlight Data Source Registers for valA, valB
proc showSources { a b } {
    global rwins valaBg valbBg 
    # Set them all to white
    foreach w [array names rwins] {
	$rwins($w) config -bg White
    }
    if {$a != "none"} { $rwins($a) config -bg $valaBg }
    if {$b != "none"} { $rwins($b) config -bg $valbBg }

    # Indicate forwarding destinations by their color
    .p.de.vala.t config -bg $valaBg
    .p.de.valb.t config -bg $valbBg
}

##########################################################################
#                    Instruction Display                                 #
##########################################################################

toplevel .c
wm title .c "Program Code"
frame .c.cntl 
pack .c.cntl -in .c -side top -anchor w
label .c.filelab -width 10 -text "File"
entry .c.filename -width 20 -relief sunken -textvariable codeFile \
	-font $dpyFont -bg white
button .c.loadbutton -width $cntlBW -command {loadCode $codeFile} -text Load
pack .c.filelab .c.filename .c.loadbutton -in .c.cntl -side left

proc clearCode {} {
    simLabel {} {}
    destroy .c.t
    destroy .c.tr
}

proc createCode {} {
    # Create Code Structure
    frame .c.t
    pack .c.t -in .c -side top -anchor w
    # Support up to 4 columns of code, each $codeRowCount lines long
    frame .c.tr
    pack .c.tr -in .c.t -side top -anchor nw
}

proc loadCode {file} {
    # Kill old code window
    clearCode
    # Create new one
    createCode
    simCode $file
    simResetAll
}

# Start with initial code window, even though it will be destroyed.
createCode

# Add a line of code to the display
proc addCodeLine {line addr op text} {
    global codeRowCount
    # Create new line in display
    global codeFont
    frame .c.tr.$addr
    pack .c.tr.$addr -in .c.tr -side top -anchor w
    label .c.tr.$addr.a -width 5 -text [format "0x%x" $addr] -font $codeFont
    label .c.tr.$addr.i -width 12 -text $op -font $codeFont 
    label .c.tr.$addr.s -width 2 -text "" -font $codeFont -bg white
    label .c.tr.$addr.t -text $text -font $codeFont
    pack .c.tr.$addr.a .c.tr.$addr.i .c.tr.$addr.s \
	    .c.tr.$addr.t -in .c.tr.$addr -side left
}

# Keep track of which instructions have stage labels

set oldAddr {}

proc simLabel {addrs labs} {
    global oldAddr
    set newAddr {}
    # Clear away any old labels
    foreach a $oldAddr {
	.c.tr.$a.s config -text ""
    }
    for {set i 0} {$i < [llength $addrs]} {incr i} {
	set a [lindex $addrs $i]
	set t [lindex $labs $i]
	if {[winfo exists .c.tr.$a]} {
	    .c.tr.$a.s config -text $t
	    set newAddr [concat $newAddr $a]
	}
    }
    set oldAddr $newAddr
}

proc simResetAll {} {
    global simStat
    set simStat "AOK"
    simReset
    clearMem
    simLabel {} {}
}

###############################################################################
#    Memory Display                                                           #
###############################################################################
toplevel .m
wm title .m "Memory Contents"
frame .m.t
pack .m.t -in .m -side top -anchor w

label .m.t.lab -width 6 -font $dpyFont -text "      "
pack .m.t.lab -in .m.t -side left
for {set i 0} {$i < 16} {incr i 4} {
    label .m.t.a$i -width 8 -font $dpyFont -text [format "  0x---%x" [expr $i % 16]]
    pack .m.t.a$i -in .m.t -side left
}


# Keep track of range of addresses currently displayed
set minAddr 0
set memCnt  0
set haveMem 0

proc createMem {nminAddr nmemCnt} {
    global minAddr memCnt haveMem codeFont dpyFont normalBg
    set minAddr $nminAddr
    set memCnt $nmemCnt

    if { $haveMem } { destroy .m.e }

    # Create Memory Structure
    frame .m.e
    set haveMem 1
    pack .m.e -in .m -side top -anchor w
    # Now fill it with values
    for {set i 0} {$i < $memCnt} {incr i 16} {
	set addr [expr $minAddr + $i]

	frame .m.e.r$i
	pack .m.e.r$i -side bottom -in .m.e
	label .m.e.r$i.lab -width 6 -font $dpyFont -text [format "0x%.3x-"  [expr $addr / 16]]
	pack .m.e.r$i.lab -in .m.e.r$i -side left

	for {set j 0} {$j < 16} {incr j 4} {
	    set a [expr $addr + $j]
	    label .m.e.v$a -width 8 -font $dpyFont -relief ridge \
                -bg $normalBg
	    pack .m.e.v$a -in .m.e.r$i -side left
	}
    }
}

proc setMem {Addr Val} {
    global minAddr memCnt
    if {$Addr < $minAddr || $Addr > [expr $minAddr + $memCnt]} {
	error "Memory address $Addr out of range"
    }
    .m.e.v$Addr config -text [format %8x $Val]
}

proc clearMem {} {
    destroy .m.e
    createMem 0 0
}



###############################################################################
#    Command Line Initialization                                              #
###############################################################################

# Get code file name from input

# Find file with specified extension
proc findFile {tlist ext} {
    foreach t $tlist {
	if {[string match "*.$ext" $t]} {return $t}
    }
    return ""
}


set codeFile [findFile $argv yo]
if {$codeFile != ""} { loadCode $codeFile}
sim/pipe/pipeline.h0000700005644400000240000000402111162763130013054 0ustar  tmsgrad/******************************************************************************
 *	pipe.h
 *
 *	Code for implementing pipelined processor simulators
 ******************************************************************************/

#ifndef PIPE_H
#define PIPE_H

/******************************************************************************
 *	#includes
 ******************************************************************************/

#include <stdio.h>

/******************************************************************************
 *	typedefs
 ******************************************************************************/

/* Different control operations for pipeline register */
/* LOAD:   Copy next state to current   */
/* STALL:  Keep current state unchanged */
/* BUBBLE: Set current state to nop     */
/* ERROR:  Occurs when both stall & load signals set */

typedef enum { P_LOAD, P_STALL, P_BUBBLE, P_ERROR } p_stat_t;

typedef struct {
    /* Current and next register state */
    void *current;
    void *next;
    /* Contents of register when bubble occurs */
    void *bubble_val;
    /* Number of state bytes */
    int count;
    /* How should state be updated next time? */
    p_stat_t op;
} pipe_ele, *pipe_ptr;

/******************************************************************************
 *	function declarations
 ******************************************************************************/

/* Create new pipe with count bytes of state */
/* bubble_val indicates state corresponding to pipeline bubble */
pipe_ptr new_pipe(int count, void *bubble_val);

/* Update all pipes */
void update_pipes();

/* Set all pipes to bubble values */
void clear_pipes();

/* Utility code */

/* Print hex/oct/binary format with leading zeros */
/* bpd denotes bits per digit  Should be in range 1-4,
   bpw denotes bits per word.*/
void wprint(unsigned x, int bpd, int bpw, FILE *fp);
void wstring(unsigned x, int bpd, int bpw, char *s);

/******************************************************************************/

#endif /* PIPE_H */



sim/pipe/sim.h0000700005644400000240000000764711251743572012067 0ustar  tmsgrad/********** Typedefs ************/

/* EX stage mux settings */
typedef enum { MUX_NONE, MUX_EX_A, MUX_EX_B, MUX_MEM_E,
	       MUX_WB_M, MUX_WB_E } mux_source_t;

/* Simulator operating modes */
typedef enum { S_WEDGED, S_STALL, S_FORWARD } sim_mode_t;

/* Pipeline stage identifiers for stage operation control */
typedef enum { IF_STAGE, ID_STAGE, EX_STAGE, MEM_STAGE, WB_STAGE } stage_id_t;

/********** Defines **************/

/* Get ra out of one byte regid field */
#define GET_RA(r) HI4(r)

/* Get rb out of one byte regid field */
#define GET_RB(r) LO4(r)


/************ Global state declaration ****************/

/* How many cycles have been simulated? */
extern int cycles;
/* How many instructions have passed through the EX stage? */
extern int instructions;

/* Both instruction and data memory */
extern mem_t mem;

/* Keep track of range of addresses that have been written */
extern int minAddr;
extern int memCnt;

/* Register file */
extern mem_t reg;
/* Condition code register */
extern cc_t cc;
extern stat_t stat;

/* Operand sources in EX (to show forwarding) */
extern mux_source_t amux, bmux;

/* Provide global access to current states of all pipeline registers */
pipe_ptr pc_state, if_id_state, id_ex_state, ex_mem_state, mem_wb_state;

/* Current States */
extern pc_ptr pc_curr;
extern if_id_ptr if_id_curr;
extern id_ex_ptr id_ex_curr;
extern ex_mem_ptr ex_mem_curr;
extern mem_wb_ptr mem_wb_curr;

/* Next States */
extern pc_ptr pc_next;
extern if_id_ptr if_id_next;
extern id_ex_ptr id_ex_next;
extern ex_mem_ptr ex_mem_next;
extern mem_wb_ptr mem_wb_next;

/* Pending updates to state */
extern word_t cc_in;
extern word_t wb_destE;
extern word_t wb_valE;
extern word_t wb_destM;
extern word_t wb_valM;
extern word_t mem_addr;
extern word_t mem_data;
extern bool_t mem_write;


/* Intermdiate stage values that must be used by control functions */
extern word_t f_pc;
extern byte_t imem_icode;
extern byte_t imem_ifun;
extern bool_t imem_error;
extern bool_t instr_valid;
extern word_t d_regvala;
extern word_t d_regvalb;
extern word_t e_vala;
extern word_t e_valb;
extern bool_t e_bcond;
extern bool_t dmem_error;

/* Simulator operating mode */
extern sim_mode_t sim_mode;
/* Log file */
extern FILE *dumpfile;

/*************** Simulation Control Functions ***********/

/* Bubble next execution of specified stage */
void sim_bubble_stage(stage_id_t stage);

/* Stall stage (has effect at next update) */
void sim_stall_stage(stage_id_t stage);

/* Sets the simulator name (called from main routine in HCL file) */
void set_simname(char *name);

/* Initialize simulator */
void sim_init();

/* Reset simulator state, including register, instruction, and data memories */
void sim_reset();

/*
  Run pipeline until one of following occurs:
  - A status error is encountered in WB.
  - max_instr instructions have completed through WB
  - max_cycle cycles have been simulated

  Return number of instructions executed.
  if statusp nonnull, then will be set to status of final instruction
  if ccp nonnull, then will be set to condition codes of final instruction
*/
int sim_run_pipe(int max_instr, int max_cycle, byte_t *statusp, cc_t *ccp);

/* If dumpfile set nonNULL, lots of status info printed out */
void sim_set_dumpfile(FILE *file);

/*
 * sim_log dumps a formatted string to the dumpfile, if it exists
 * accepts variable argument list
 */
void sim_log( const char *format, ... );

 
/******************* GUI Interface Functions **********************/
#ifdef HAS_GUI

void signal_sources();

void signal_register_clear();

void report_pc(unsigned fpc, unsigned char fpcv,
	       unsigned dpc, unsigned char dpcv,
	       unsigned epc, unsigned char epcv,
	       unsigned mpc, unsigned char mpcv,
	       unsigned wpc, unsigned char wpcv);

void report_state(char *id, int current, char *txt);

void show_cc(cc_t cc);
void show_cpi();
void show_stat(stat_t stat);

void create_memory_display();
void set_memory(int addr, int val);
#endif
								       
sim/pipe/stages.h0000700005644400000240000000526611162766615012564 0ustar  tmsgrad/* 
 * stages.h - Defines the layout of the pipe registers
 * Declares the functions that implement the pipeline stages
*/


/********** Pipeline register contents **************/

/* Program Counter */
typedef struct {
    word_t pc;
    stat_t status;
} pc_ele, *pc_ptr;

/* IF/ID Pipe Register */
typedef struct {
    byte_t icode;  /* Single byte instruction code */
    byte_t ifun;    /* ALU/JMP qualifier */
    byte_t ra; /* Register ra ID */
    byte_t rb; /* Register rb ID */
    word_t valc;  /* Instruction word encoding immediate data */
    word_t valp; /* Incremented program counter */
    stat_t status;
    /* The following is included for debugging */
    word_t stage_pc;
} if_id_ele, *if_id_ptr;

/* ID/EX Pipe Register */
typedef struct {
    byte_t icode;        /* Instruction code */
    byte_t ifun;        /* ALU/JMP qualifier */
    word_t valc;        /* Immediate data */
    word_t vala;        /* valA */
    word_t valb;        /* valB */
    byte_t srca;  /* Source Reg ID for valA */
    byte_t srcb;  /* Source Reg ID for valB */
    byte_t deste; /* Destination register for valE */
    byte_t destm; /* Destination register for valM */
    stat_t status;
    /* The following is included for debugging */
    word_t stage_pc;
} id_ex_ele, *id_ex_ptr;

/* EX/MEM Pipe Register */
typedef struct {
    byte_t icode;        /* Instruction code */
    byte_t ifun;          /* ALU/JMP qualifier */
    bool_t takebranch;  /* Taken branch signal */
    word_t vale;        /* valE */
    word_t vala;        /* valA */
    byte_t deste; /* Destination register for valE */
    byte_t destm; /* Destination register for valM */
    byte_t srca;  /* Source register for valA */
    stat_t status;
    /* The following is included for debugging */
    word_t stage_pc;
} ex_mem_ele, *ex_mem_ptr;

/* Mem/WB Pipe Register */
typedef struct {
    byte_t icode;        /* Instruction code */
    byte_t ifun;         /* ALU/JMP qualifier */
    word_t vale;         /* valE */
    word_t valm;         /* valM */
    byte_t deste; /* Destination register for valE */
    byte_t destm; /* Destination register for valM */
    stat_t status;
    /* The following is included for debugging */
    word_t stage_pc;
} mem_wb_ele, *mem_wb_ptr;

/************ Global Declarations ********************/

extern pc_ele bubble_pc;
extern if_id_ele bubble_if_id;
extern id_ex_ele bubble_id_ex;
extern ex_mem_ele bubble_ex_mem;
extern mem_wb_ele bubble_mem_wb;

/************ Function declarations *******************/

/* Stage functions */
void do_if_stage();
void do_id_wb_stages();  /* Both ID and WB */
void do_ex_stage();
void do_mem_stage();

/* Set stalling conditions for different stages */
void do_stall_check();


sim/pipe/Makefile0000700005644400000240000000321311555625541012551 0ustar  tmsgrad# Modify this line to indicate the default version to build

VERSION=std

# Comment this out if you don't have Tcl/Tk on your system

GUIMODE=-DHAS_GUI

# Modify the following line so that gcc can find the libtcl.so and
# libtk.so libraries on your system. You may need to use the -L option
# to tell gcc which directory to look in. Comment this out if you
# don't have Tcl/Tk.

TKLIBS=-L/usr/lib -ltk -ltcl

# Modify the following line so that gcc can find the tcl.h and tk.h
# header files on your system. Comment this out if you don't have
# Tcl/Tk.

TKINC=-isystem /usr/include

# Modify these two lines to choose your compiler and compile time
# flags.

CC=gcc
CFLAGS=-Wall -O2

##################################################
# You shouldn't need to modify anything below here
##################################################

MISCDIR=../misc
HCL2C=$(MISCDIR)/hcl2c
INC=$(TKINC) -I$(MISCDIR) $(GUIMODE)
LIBS=$(TKLIBS) -lm
YAS = ../misc/yas

all: psim drivers

# This rule builds the PIPE simulator
psim: psim.c sim.h pipe-$(VERSION).hcl $(MISCDIR)/isa.c $(MISCDIR)/isa.h
	# Building the pipe-$(VERSION).hcl version of PIPE
	$(HCL2C) -n pipe-$(VERSION).hcl < pipe-$(VERSION).hcl > pipe-$(VERSION).c
	$(CC) $(CFLAGS) $(INC) -o psim psim.c pipe-$(VERSION).c \
		$(MISCDIR)/isa.c $(LIBS)

# This rule builds driver programs for Part C of the Architecture Lab
drivers: 
	./gen-driver.pl -n 4 -f ncopy.ys > sdriver.ys
	../misc/yas sdriver.ys
	./gen-driver.pl -n 63 -f ncopy.ys > ldriver.ys
	../misc/yas ldriver.ys

# These are implicit rules for assembling .yo files from .ys files.
.SUFFIXES: .ys .yo
.ys.yo:
	$(YAS) $*.ys


clean:
	rm -f psim pipe-*.c *.o *.exe *~ 


sim/pipe/README0000700005644400000240000001271511515661344011775 0ustar  tmsgrad/***********************************************************************
 * Pipelined Y86 Simulator
 *
 * Copyright (c) 2002, 2010, R. Bryant and D. O'Hallaron,
 * All rights reserved.
 * May not be used, modified, or copied without permission.
 ***********************************************************************/ 

This directory contains the code to construct simulators for PIPE and
the variants of it described in the homework exercises.

*************************
1. Building the simulator
*************************

Different versions of the PIPE simulator can be constructed to use
different HCL files when working on the different homework problems.


Binary	VERSION		HCL File	  Description
psim	std		pipe-std.hcl	  Standard simulator (default)
psim	broken		pipe-broken.hcl   Does not handle any hazards
psim	full		pipe-full.hcl	  For adding iaddl and leave
psim	nobypass	pipe-nobypass.hcl For implementing PIPE-
					  (called pipe-stall.hcl in text)
psim	lf		pipe-lf.hcl	  For implementing load forwarding
psim	nt		pipe-nt.hcl	  For implementing NT branch prediction
psim	btfnt		pipe-btfnt.hcl	  For implementing BTFNT branch pred.
psim	1w		pipe-1w.hcl	  For implementing single write port


The Makefile can be configured to build simulators that support GUI
and/or TTY interfaces. A simulator running in TTY mode prints all
information about its runtime behavior on the terminal.  It's hard to
understand what's going on, but useful for automated testing, and
doesn't require any special installation features.  A simulator
running in GUI mode uses a fancy graphical user interface.  Nice for
visualizing and debugging, but requires installation of Tcl/Tk on your
system.

The Makefile has simple instructions for building the TTY and GUI
forms. In either case, once you've configured the Makefile, you can
build different versions of the simulators with different HCL files
with commands of the form:

	unix> make clean; make psim VERSION=xxx

where "xxx" is one of the versions listed above.  To save typing, you
can set the Makefile's VERSION variable. For example, if you are working
on Problems 4.52 and 4.53, which require to modify pipe-full.hcl, then 
you could set VERSION=full in the Makefile. Typing

	unix> make clean; make psim

would then make the pipe-full.hcl version of PIPE.

***********************
2. Using the simulators
***********************

The simulator recognize the following command line arguments:

Usage: psim [-htg] [-l m] [-v n] file.yo

file.yo required in GUI mode, optional in TTY mode (default stdin)

   -h     Print this message
   -g     Run in GUI mode instead of TTY mode (default TTY mode)
   -l m   Set instruction limit to m [TTY mode only] (default 10000)
   -v n   Set verbosity level to 0 <= n <= 2 [TTY mode only] (default 2)
   -t     Test result against the ISA simulator (yis) [TTY model only]

********
3. Files
********

Makefile		Build the simulator
Makefile-sim		Makefile for the student distribution
README			This file

**********************************************
* Files related to the CS:APP Architecture Lab
**********************************************

* Sample programs
ncopy.ys		The default version of ncopy that the students optimize
ncopy.c			C version of ncopy that defines its semantics

* Preconstructed driver programs (by gen-driver.pl)
sdriver.ys		Driver that calls ncopy.ys on a short (4-word) array
ldriver.ys		Driver that calls ncopy.ys on a longer (63-word) array 
			Both drivers are generated automatically by the
			Makefile by typing "make drivers".

* Solution files (Instructors only)
gen-ncopy.pl	        Generates versions of benchmark program with various
		        optimizations.  See comments in file for explanation.

* Testing scripts
gen-driver.pl		Generate a driver program for an arbitrary ncopy 
			implementation (default ncopy.ys). Type "make drivers"
			to construct sdriver.ys and ldriver.ys.
benchmark.pl		Runs an implementation of ncopy on array sizes
			1 to 64	(default ncopy.ys) and computes its performance
			in units of CPE (cycles per element).
correctness.pl		Runs an implementation of ncopy on array sizes 
			0 to 64, and several longer ones and checks each for
			correctness.
check-len.pl		Determines number of bytes in .yo representation of
			ncopy function.


****************************************************
* HCL files for different versions of the simulators
****************************************************

pipe-std.hcl		The standard PIPE processor described in the text
pipe-broken.hcl		A simulator that does not detect or handle hazards
			(useful when explaining hazards in lectures)

* HCL files for various CS:APP Homework Problems
pipe-nobypass.hcl	4.51: Build version of PIPE without bypassing 
			(called pipe-stall.hcl in the text)
pipe-full.hcl		4.52-53: Add iaddl and leave instructions to PIPE
pipe-nt.hcl		4.54: Implement branch not taken strategy
pipe-btfnt.hcl		4.55: Implement back-taken forward-not-taken strategy
pipe-lf.hcl		4.56: Implement load forwarding logic
pipe-1w.hcl		4.57: Implement single ported register file

* HCL solution files for the CS:APP Homework Problems (Instructors only)
pipe-nobypass-ans.hcl	4.51 solution
pipe-full-ans.hcl	4.52-53 solutions
pipe-nt-ans.hcl		4.54 solution
pipe-btfnt-ans.hcl	4.55 solution
pipe-lf-ans.hcl		4.56 solutions
pipe-1w-ans.hcl		4.57 solutions

*****************************
* PIPE simulator source files
*****************************

psim.c			Base simulator code
sim.h			PIPE header files
pipeline.h
stages.h
pipe.tcl		TCL script for the GUI version of PIPE



sim/pipe/ncopy.c0000700005644400000240000000100307533157264012403 0ustar  tmsgrad#include <stdio.h>

int src[8], dst[8];

/* $begin ncopy */
/*
 * ncopy - copy src to dst, returning number of positive ints
 * contained in src array.
 */
int ncopy(int *src, int *dst, int len)
{
    int count = 0;
    int val;

    while (len > 0) {
	val = *src++;
	*dst++ = val;
	if (val > 0)
	    count++;
	len--;
    }
    return count;
}
/* $end ncopy */

int main()
{
    int i, count;

    for (i=0; i<8; i++)
	src[i]= i+1;
    count = ncopy(src, dst, 8);
    printf ("count=%d\n", count);
    exit(0);
}


sim/pipe/ncopy.ys0000700005644400000240000000313311515370217012610 0ustar  tmsgrad#/* $begin ncopy-ys */
##################################################################
# ncopy.ys - Copy a src block of len ints to dst.
# Return the number of positive ints (>0) contained in src.
#
# Include your name and ID here.
#
# Describe how and why you modified the baseline code.
#
##################################################################
# Do not modify this portion
# Function prologue.
ncopy:	pushl %ebp		# Save old frame pointer
	rrmovl %esp,%ebp	# Set up new frame pointer
	pushl %esi		# Save callee-save regs
	pushl %ebx
	pushl %edi
	mrmovl 8(%ebp),%ebx	# src
	mrmovl 16(%ebp),%edx	# len
	mrmovl 12(%ebp),%ecx	# dst

##################################################################
# You can modify this portion
	# Loop header
	xorl %eax,%eax		# count = 0;
	andl %edx,%edx		# len <= 0?
	jle Done		# if so, goto Done:

Loop:	mrmovl (%ebx), %esi	# read val from src...
	rmmovl %esi, (%ecx)	# ...and store it to dst
	andl %esi, %esi		# val <= 0?
	jle Npos		# if so, goto Npos:
	irmovl $1, %edi
	addl %edi, %eax		# count++
Npos:	irmovl $1, %edi
	subl %edi, %edx		# len--
	irmovl $4, %edi
	addl %edi, %ebx		# src++
	addl %edi, %ecx		# dst++
	andl %edx,%edx		# len > 0?
	jg Loop			# if so, goto Loop:
##################################################################
# Do not modify the following section of code
# Function epilogue.
Done:
	popl %edi               # Restore callee-save registers
	popl %ebx
	popl %esi
	rrmovl %ebp, %esp
	popl %ebp
	ret
##################################################################
# Keep the following label at the end of your function
End:
#/* $end ncopy-ys */
sim/pipe/benchmark.pl0000700005644400000240000000450011556101251013364 0ustar  tmsgrad#!/usr/bin/perl
#!/usr/local/bin/perl

# 
# benchmark.pl - Run test of pipeline on ncopy for different block sizes 
#                and determine CPE (cycles per element)
#
use Getopt::Std;

#
# Configuration
#
$blocklen = 64;
$yas = "../misc/yas";
$pipe = "./psim";
$gendriver = "./gen-driver.pl";
$fname = "bdriver";
$verbose = 1;

## Grading criteria
$totalpoints = 60;
# What CPE is required to get full credit?
$fullcpe = 10.0;
# What CPE is required to get nonzero credit:
$threshcpe = 12.5;



#
# usage - Print the help message and terminate
#
sub usage {
    print STDERR "Usage: $0 [-hq] [-n N] -f FILE\n";
    print STDERR "   -h      Print help message\n";
    print STDERR "   -q      Quiet mode (default verbose)\n";
    print STDERR "   -n N    Set max number of elements up to 64 (default $blocklen)\n";
    print STDERR "   -f FILE Input .ys file is FILE\n";
    die "\n";
}

getopts('hqn:f:');

if ($opt_h) {
    usage();
}

if ($opt_q) {
    $verbose = 0;
}

if ($opt_n) {
    $blocklen = $opt_n;
    if ($blocklen < 0 || $blocklen > 64) {
	print STDERR "n must be between 0 and 64\n";
	die "\n";
    }
}

# Filename is required
if (!$opt_f) {
    $ncopy = "ncopy";
} else {
    $ncopy = $opt_f;
    # Strip off .ys
    $ncopy =~ s/\.ys//;
}

if ($verbose) {
    print "\t$ncopy\n";
}

$tcpe = 0;
for ($i = 0; $i <= $blocklen; $i++) {
    !(system "$gendriver -n $i -f $ncopy.ys > $fname$i.ys") ||
	die "Couldn't generate driver file $fname$i.ys\n";
    !(system "$yas $fname$i.ys") ||
	die "Couldn't assemble file $fname$i.ys\n";
    $stat = `$pipe -v 0 $fname$i.yo` ||
	die "Couldn't simulate file $fname$i.yo\n";
#    print $stat;
    !(system "rm $fname$i.ys $fname$i.yo") ||
	die "Couldn't remove files $fname$i.ys and/or $fname$i.yo\n";
    chomp $stat;
    $stat =~ s/[ ]*CPI:[ ]*//;
    $stat =~ s/ cycles.*//;
    if ($i > 0) {
      $cpe = $stat/$i;
      if ($verbose) {
	printf "%d\t%d\t%.2f\n", $i, $stat, $cpe;
      }
      $tcpe += $cpe;
    } else {
      if ($verbose) {
	printf "%d\t%d\n", $i, $stat;
      }
    }
      
}

$acpe = $tcpe/$blocklen;
printf "Average CPE\t%.2f\n", $acpe;

## Compute Score
$score = 0;
if ($acpe <= $fullcpe) {
    $score = $totalpoints;
} elsif ($acpe <= $threshcpe) {
    $score = $totalpoints * ($threshcpe - $acpe)/($threshcpe - $fullcpe);
}
printf "Score\t%.1f/%.1f\n", $score, $totalpoints;

sim/pipe/correctness.pl0000700005644400000240000000620511556103326013775 0ustar  tmsgrad#!/usr/bin/perl
#!/usr/local/bin/perl

#
# correctness.pl - Test ncopy assembly code for correctness
#
use Getopt::Std;

#
# Configuration
#
$blocklen = 64;
$over = 3;
$yas = "../misc/yas";
$yis = "../misc/yis";
$pipe = "./psim";
$gendriver = "./gen-driver.pl";
$fname = "cdriver";
$verbose = 1;
# Maximum allowable code length
$bytelim = 1000;

#
# usage - Print the help message and terminate
#
sub usage {
    print STDERR "Usage: $0 [-hq] [-n N] -f FILE\n";
    print STDERR "   -h      Print help message\n";
    print STDERR "   -q      Quiet mode (default verbose)\n";
    print STDERR "   -p      Run program on pipeline simulator\n";
    print STDERR "   -n N    Set max number of elements up to 64 (default $blocklen)\n";
    print STDERR "   -f FILE Input .ys file is FILE\n";
    print STDERR "   -b blim set byte limit for function\n";
    die "\n";
}

getopts('hqpn:f:b:');

if ($opt_h) {
    usage();
}

if ($opt_q) {
    $verbose = 0;
}

if ($opt_b) {
    $bytelim = $opt_b;
}

$usepipe = 0;
if ($opt_p) {
    $usepipe = 1;
    print "Simulating with pipeline simulator psim\n";
} else {
    print "Simulating with instruction set simulator yis\n";
}


if ($opt_n) {
    $blocklen = $opt_n;
    if ($blocklen < 0) {
	print STDERR "n must be >= 0\n";
	die "\n";
    }
}

# Filename is required
if (!$opt_f) {
    $ncopy = "ncopy";
} else {
    $ncopy = $opt_f;
    # Strip off .ys
    $ncopy =~ s/\.ys//;
}

if ($verbose) {
    print "\t$ncopy\n";
}

$goodcnt = 0;

for ($i = 0; $i <= $blocklen+$over; $i++) {
    $len = $i;
    if ($i > $blocklen) {
	# Try some larger values
	$len = $blocklen * ($i - $blocklen + 1);
    }
    !(system "$gendriver -rc -n $len -f $ncopy.ys -b $bytelim > $fname$len.ys") ||
	die "Couldn't generate driver file $fname$len.ys\n";
    !(system "$yas $fname$len.ys") ||
	die "Couldn't assemble file $fname$len.ys\n";
    if ($usepipe) {
	!(system "$pipe -v 1 $fname$len.yo > $fname$len.pipe") ||
	    die "Couldn't simulate file $fname$len.yo with pipeline simulator\n";
	$stat = `grep "eax:" $fname$len.pipe`;
	!(system "rm $fname$len.ys $fname$len.yo $fname$len.pipe") ||
	    die "Couldn't remove files $fname$len.ys and/or $fname$len.yo and/or $fname$len.pipe\n";
	chomp $stat;
    } else {
	!(system "$yis $fname$len.yo > $fname$len.yis") ||
	    die "Couldn't simulate file $fname$len.yo with instruction set simulator\n";
	$stat = `grep eax $fname$len.yis`;
	!(system "rm $fname$len.ys $fname$len.yo $fname$len.yis") ||
	    die "Couldn't remove files $fname$len.ys and/or $fname$len.yo and/or $fname$len.yis\n";
	chomp $stat;
    }
    $result = "failed";
    if ($stat =~ "zzzz") {
	$result = "Couldn't run checking code";
    }
    if ($stat =~ "aaaa") {
	$result = "OK";
	$goodcnt ++;
    }
    if ($stat =~ "bbbb") {
	$result = "Bad count";
    }
    if ($stat =~ "cccc") {
	$result = "Program too long";
	printf "%d\t%s\n", $len, $result;
	exit(0);
    }
    if ($stat =~ "dddd") {
	$result = "Incorrect copying";
    }
    if ($stat =~ "eeee") {
	$result = "Corruption before or after destination";
    }
    if ($verbose) {
	printf "%d\t%s\n", $len, $result;
    }
}

$bp1 = $blocklen+$over+1;
printf "$goodcnt/$bp1 pass correctness test\n";



sim/pipe/gen-driver.pl0000700005644400000240000001175211515366777013530 0ustar  tmsgrad#!/usr/bin/perl 
#!/usr/local/bin/perl 

#
# gen-driver - Generate driver file for any ncopy function
#
use Getopt::Std;

$n = 0;

getopts('hcrn:f:b:');

if ($opt_h) {
    print STDERR "Usage $argv[0] [-h] [-c] [-n N] [-f FILE]\n";
    print STDERR "   -h      print help message\n";
    print STDERR "   -c      include correctness checking code\n";
    print STDERR "   -n N    set number of elements\n";
    print STDERR "   -f FILE set input file (default stdin)\n";
    print STDERR "   -b blim set byte limit for function\n";
    print STDERR "   -r      Allow random result\n";
    die "\n";
}

$check = 0;
if ($opt_c) {
    $check = 1;
}

$bytelim = 1000;
if ($opt_b) {
    $bytelim = $opt_b;
}

if ($opt_n) {
    $n = $opt_n;
    if ($n < 0) {
	print STDERR "n must be at least 0\n";
	die "\n";
    }
}

$randomval = 0;
# Accumulated count
$rval = 0;

if ($opt_r) {
  $randomval = 1;
} else {
  # Value that should be returned by function
  $tval = int($n/2);
}


# The data to be stored.
@data = ();

for ($i = 0; $i < $n; $i++) {
  $data[$i] = -($i+1);
  if ($randomval) {
    if (int(rand(2)) == 1) {
      $data[$i] = -$data[$i];
      $rval++;
    }
  } else {
    if ($rval < $tval && int(rand(2)) % 2 == 1 ||
	$tval - $rval >= $n - $i) {
      $data[$i] = -$data[$i];
      $rval++;
    }
  }
}


# Values to put at beginning and end of destination
$Preval =  "0xbcdefa";
$Postval = "0xdefabc";


print <<PROLOGUE;
#######################################################################
# Test for copying block of size $n;
#######################################################################
	.pos 0
main:	irmovl Stack, %esp  	# Set up stack pointer
	irmovl Stack, %ebp  	# Set up base pointer

	# Set up arguments for copy function and then invoke it
	irmovl \$$n, %eax		# src and dst have $n elements
	pushl %eax
	irmovl dest, %eax	# dst array
	pushl %eax
	irmovl src, %eax	# src array
	pushl %eax
	call ncopy		 
PROLOGUE

if ($check) {
print <<CALL;
	call check	        # Call checker code
	halt                    # should halt with 0xaaaa in %eax
CALL
} else {
print <<HALT;
	halt			# should halt with num nonzeros in %eax
HALT
}

print "StartFun:\n";
if ($opt_f) {
    open (CODEFILE, "$opt_f") || die "Can't open code file $opt_f\n";
    while (<CODEFILE>) {
	printf "%s", $_;
    }
} else {
    while (<>) {
	printf "%s", $_;
    }
}
print "EndFun:\n";

if ($check) {
print <<CHECK;
#################################################################### 
# Epilogue code for the correctness testing driver
####################################################################

# This is the correctness checking code.
# It checks:
#   1. %eax has $rval.  Set %eax to 0xbbbb if not.
#   2. The total length of the code is less than or equal to $bytelim.
#      Set %eax to 0xcccc if not.
#   3. The source data was copied to the destination.
#      Set %eax to 0xdddd if not.
#   4. The words just before and just after the destination region
#      were not corrupted.  Set %eax to 0xeeee if not.
# If all checks pass, then sets %eax to 0xaaaa
check:
	pushl %ebp
	rrmovl %esp,%ebp
	pushl %esi
	pushl %ebx
	pushl %edi
	# Return value test
	irmovl \$$rval,%edx
	subl %edx,%eax
	je checkb
	irmovl \$0xbbbb,%eax  # Failed test #1
	jmp cdone
checkb:
	# Code length check
	irmovl EndFun,%eax
	irmovl StartFun,%edx
	subl %edx,%eax
	irmovl \$$bytelim,%edx
	subl %eax,%edx
	jge checkm
	irmovl \$0xcccc,%eax  # Failed test #2
	jmp cdone
checkm:
	irmovl dest, %edx # Pointer to next destination location
	irmovl src,%ebx   # Pointer to next source location
	irmovl \$$n,%edi  # Count
	andl %edi,%edi
	je checkpre         # Skip check if count = 0
mcloop:
	mrmovl (%edx),%eax
	mrmovl (%ebx),%esi
	subl %esi,%eax
	je  mok
	irmovl \$0xdddd,%eax # Failed test #3
	jmp cdone
mok:
	irmovl \$4,%eax
	addl %eax,%edx	  # dest ++
	addl %eax,%ebx    # src++
	irmovl \$1,%eax
	subl %eax,%edi    # cnt--
	jg mcloop
checkpre:
	# Check for corruption
	irmovl Predest,%edx
	mrmovl (%edx), %eax  # Get word before destination
	irmovl \$$Preval, %edx
	subl %edx,%eax
	je checkpost
	irmovl \$0xeeee,%eax  # Failed test #4
	jmp cdone
checkpost:
	# Check for corruption
	irmovl Postdest,%edx
	mrmovl (%edx), %eax  # Get word after destination
	irmovl \$$Postval, %edx
	subl %edx,%eax
	je checkok
	irmovl \$0xeeee,%eax # Failed test #4
	jmp cdone
checkok:
	# Successful checks
	irmovl \$0xaaaa,%eax
cdone:
	popl %edi
	popl %ebx
	popl %esi
	rrmovl %ebp, %esp
	popl %ebp
	ret
CHECK
}

print <<EPILOGUE1;

###############################
# Source and destination blocks 
###############################
	.align 4
src:
EPILOGUE1

for ($i = 0; $i < $n; $i++) {
    print "\t.long $data[$i]\n";
}

print <<EPILOGUE2;
	.long $Preval # This shouldn't get moved

	.align 16
Predest:
	.long $Preval
dest:
EPILOGUE2

for ($i = 0; $i < $n; $i++) {
    print "\t.long 0xcdefab\n";
}

print <<EPILOGUE3;
Postdest:
	.long $Postval

.align 4
# Run time stack
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0
	.long 0

Stack:
EPILOGUE3

sim/pipe/check-len.pl0000700005644400000240000000101611515410552013264 0ustar  tmsgrad#!/usr/bin/perl

# Check length of ncopy function in .yo file
# Assumes that function starts with label "ncopy:"
# and finishes with label "End:"

$startpos = -1;
$endpos = -1;

while (<>) {
  $line = $_;
  if ($line =~ /(0x[0-9a-fA-F]+):.* ncopy:/) {
    $startpos = hex($1);
  }
  if ($line =~ /(0x[0-9a-fA-F]+):.* End:/) {
    $endpos = hex($1);
  }
}

if ($startpos >= 0 && $endpos > $startpos) {
  $len = $endpos - $startpos;
  print "ncopy length = $len bytes\n";
} else {
  print "Couldn't determine ncopy length\n";
}
sim/y86-code/0000700005644400000240000000000011715057306011504 5ustar  tmsgradsim/y86-code/abs-asum-cmov.ys0000700005644400000240000000232711243275725014545 0ustar  tmsgrad# Modification of asum code to compute absolute values of entries.
# This version uses a conditional jump
# Execution begins at address 0
	.pos 0
init:	irmovl Stack, %esp  	# Set up Stack pointer
	irmovl Stack, %ebp  	# Set up base pointer
	jmp Main		# Execute main program

# Array of 4 elements
	.align 4
array:	.long 0x0000000d
	.long 0xffffff40 # -0xc0
	.long 0x00000b00
	.long 0xffff6000 # -0xa0000

Main:	irmovl $4,%eax
	pushl %eax	# Push 4
	irmovl array,%edx
	pushl %edx      # Push array
	call AbsSum	# Sum(array, 4)
	halt

	# int AbsSum(int *Start, int Count)
AbsSum:
	pushl %ebp
	rrmovl %esp,%ebp
	mrmovl 8(%ebp),%ecx 	# ecx = Start
	mrmovl 12(%ebp),%edx	# edx = Count
	irmovl $0, %eax		# sum = 0
	andl   %edx,%edx
	je     End
/* $begin abs-sum-cmov-ys 0 */
Loop:
	mrmovl (%ecx),%esi      # get x = *Start
	irmovl $0,%edi		# 0
	subl %esi,%edi		# -x
	cmovg %edi,%esi		# if -x > 0 then x = -x
	addl %esi,%eax          # add x to sum
	irmovl $4,%ebx          # 
	addl %ebx,%ecx          # Start++
	irmovl $-1,%ebx	        # 
	addl %ebx,%edx          # Count--
	jne    Loop             # Stop when 0
/* $end abs-sum-cmov-ys 0 */
End:	
	popl %ebp
	ret

	.pos 0x100
Stack:	# The stack goes here
/* $end code-ysa */
/* $end code-yso */
sim/y86-code/abs-asum-jmp.ys0000700005644400000240000000235111233411136014347 0ustar  tmsgrad# Modification of asum code to compute absolute values of entries.
# This version uses a conditional jump
# Execution begins at address 0
	.pos 0
init:	irmovl Stack, %esp  	# Set up Stack pointer
	irmovl Stack, %ebp  	# Set up base pointer
	jmp Main		# Execute main program

# Array of 4 elements
	.align 4
array:	.long 0x0000000d
	.long 0xffffff40 # -0xc0
	.long 0x00000b00
	.long 0xffff6000 # -0xa0000

Main:	irmovl $4,%eax
	pushl %eax	# Push 4
	irmovl array,%edx
	pushl %edx      # Push array
	call AbsSum	# Sum(array, 4)
	halt

/* $begin abs-sum-jmp-ys 0 */
	# int AbsSum(int *Start, int Count)
AbsSum:
	pushl %ebp
	rrmovl %esp,%ebp
	mrmovl 8(%ebp),%ecx 	# ecx = Start
	mrmovl 12(%ebp),%edx	# edx = Count
	irmovl $0, %eax		# sum = 0
	andl   %edx,%edx
	je     End
Loop:
	mrmovl (%ecx),%esi      # get x = *Start
	irmovl $0,%edi		# 0
	subl %esi,%edi		# -x
	jle Pos			# Skip if -x <= 0
	rrmovl %edi,%esi	# x = -x
Pos:  
	addl %esi,%eax          # add x to sum
	irmovl $4,%ebx          # 
	addl %ebx,%ecx          # Start++
	irmovl $-1,%ebx	        # 
	addl %ebx,%edx          # Count--
	jne    Loop             # Stop when 0
End:	
	popl %ebp
	ret
/* $end abs-sum-jmp-ys 0 */
	.pos 0x100
Stack:	# The stack goes here
/* $end code-ysa */
/* $end code-yso */
sim/y86-code/asum.ys0000600005644400000240000000224311715057306013031 0ustar  tmsgrad/* $begin code-yso */
/* $begin code-ysa */
# Execution begins at address 0 
	.pos 0 
init:	irmovl Stack, %esp  	# Set up stack pointer  
	irmovl Stack, %ebp  	# Set up base pointer   
	call Main		# Execute main program
	halt			# Terminate program 

# Array of 4 elements
	.align 4 	
array:	.long 0xd
	.long 0xc0
	.long 0xb00
	.long 0xa000	

Main:	pushl %ebp 
	rrmovl %esp,%ebp
	irmovl $4,%eax	
	pushl %eax		# Push 4
	irmovl array,%edx
	pushl %edx      	# Push array
	call Sum		# Sum(array, 4)
	rrmovl %ebp,%esp
	popl %ebp
	ret 

/* $begin sum-ys 0 */
	# int Sum(int *Start, int Count)
Sum:	pushl %ebp
	rrmovl %esp,%ebp
	mrmovl 8(%ebp),%ecx 	# ecx = Start
	mrmovl 12(%ebp),%edx	# edx = Count
	xorl %eax,%eax		# sum = 0
	andl   %edx,%edx	# Set condition codes
	je     End
Loop:	mrmovl (%ecx),%esi	# get *Start
	addl %esi,%eax          # add to sum
	irmovl $4,%ebx          # 
	addl %ebx,%ecx          # Start++
	irmovl $-1,%ebx	        # 
	addl %ebx,%edx          # Count--
	jne    Loop             # Stop when 0
End:	rrmovl %ebp,%esp
	popl %ebp
	ret
/* $end sum-ys 0 */

# The stack starts here and grows to lower addresses
	.pos 0x100		
Stack:	 
/* $end code-ysa */
/* $end code-yso */
sim/y86-code/asumr.ys0000700005644400000240000000230407533157264013221 0ustar  tmsgrad# Execution begins at address 0
	.pos 0
init:	irmovl Stack, %esp  	# Set up Stack pointer
	irmovl Stack, %ebp  	# Set up base pointer
	jmp Main		# Execute main program

# Array of 4 elements
	.align 4
array:	.long 0xd
	.long 0xc0
	.long 0xb00
	.long 0xa000

Main:	irmovl $4,%eax
	pushl %eax	# Push 4
	irmovl array,%edx
	pushl %edx      # Push array
	call rSum	# Sum(array, 4)
	halt

/* $begin rsum-ys */
	# int Sum(int *Start, int Count)
rSum:	pushl %ebp
	rrmovl %esp,%ebp
	pushl %ebx           # Save value of %ebx
	mrmovl 8(%ebp),%ebx  # Get Start
	mrmovl 12(%ebp),%eax # Get Count
	andl %eax,%eax       # Test value of Count
	jle L38              # If <= 0, goto zreturn
	irmovl $-1,%edx
	addl %edx,%eax       # Count--
	pushl %eax           # Push Count
	irmovl $4,%edx
	rrmovl %ebx,%eax
	addl %edx,%eax       
	pushl %eax           # Push Start+1
	call rSum            # Sum(Start+1, Count-1)
	mrmovl (%ebx),%edx
	addl %edx,%eax       # Add *Start
	jmp L39              # goto done
L38:	xorl %eax,%eax       # zreturn:
L39:	mrmovl -4(%ebp),%ebx # done: Restore %ebx
	rrmovl %ebp,%esp     # Deallocate stack frame
	popl %ebp            # Restore %ebp
	ret
/* $end rsum-ys */
	.pos 0x400
Stack:	# The stack goes here
sim/y86-code/asumi.ys0000700005644400000240000000167307533157265013221 0ustar  tmsgrad/* $begin code-yso */
/* $begin code-ysa */
# This version makes use of the iaddl instruction
# Execution begins at address 0
	.pos 0
init:	irmovl Stack, %esp  	# Set up Stack pointer
	irmovl Stack, %ebp  	# Set up base pointer
	jmp Main		# Execute main program

# Array of 4 elements
	.align 4
array:	.long 0xd
	.long 0xc0
	.long 0xb00
	.long 0xa000

Main:	irmovl $4,%eax
	pushl %eax	# Push 4
	irmovl array,%edx
	pushl %edx      # Push array
	call Sum	# Sum(array, 4)
	halt

	# int Sum(int *Start, int Count)
Sum:	pushl %ebp
	rrmovl %esp,%ebp
	mrmovl 8(%ebp),%ecx 	# ecx = Start
	mrmovl 12(%ebp),%edx	# edx = Count
	irmovl $0, %eax		# sum = 0
	andl   %edx,%edx
	je     End
Loop:	mrmovl (%ecx),%esi   # get *Start
	addl %esi,%eax       # add to sum
	iaddl  $4,%ecx       # Sum++
        iaddl  $-1,%edx      # Count--
	jne    Loop          # Stop when 0
End:	popl %ebp
	ret
	.pos 0x100
Stack:	# The stack goes here
/* $end code-ysa */
/* $end code-yso */
sim/y86-code/asuml.ys0000700005644400000240000000173207533157264013217 0ustar  tmsgrad/* $begin code-yso */
/* $begin code-ysa */
# Execution begins at address 0
# This version uses a leave instruction
	.pos 0
init:	irmovl Stack, %esp  	# Set up Stack pointer
	irmovl Stack, %ebp  	# Set up base pointer
	jmp Main		# Execute main program

# Array of 4 elements
	.align 4
array:	.long 0xd
	.long 0xc0
	.long 0xb00
	.long 0xa000

Main:	irmovl $4,%eax
	pushl %eax	# Push 4
	irmovl array,%edx
	pushl %edx      # Push array
	call rSum	# Sum(array, 4)
	halt

	# int Sum(int *Start, int Count)
rSum:	pushl %ebp
	rrmovl %esp,%ebp
	irmovl $20,%eax
	subl %eax,%esp
	pushl %ebx
	mrmovl 8(%ebp),%ebx
	mrmovl 12(%ebp),%eax
	andl %eax,%eax
	jle L38
	irmovl $-8,%edx
	addl %edx,%esp
	irmovl $-1,%edx
	addl %edx,%eax
	pushl %eax
	irmovl $4,%edx
	rrmovl %ebx,%eax
	addl %edx,%eax
	pushl %eax
	call rSum
	mrmovl (%ebx),%edx
	addl %edx,%eax
	jmp L39
L38:	xorl %eax,%eax
L39:	mrmovl -24(%ebp),%ebx
	leave
	ret

	.pos 0x400
Stack:	# The stack goes here
/* $end code-ysa */
/* $end code-yso */
sim/y86-code/cjr.ys0000700005644400000240000000077007533157264012655 0ustar  tmsgrad# /* $begin cjr-ys */
# Code to generate a combination of not-taken branch and ret
	irmovl Stack, %esp
	irmovl rtnp,%eax
	pushl %eax	   # Set up return pointer
	xorl %eax,%eax     # Set Z condition code
	jne target	   # Not taken (First part of combination)
        irmovl $1,%eax     # Should execute this
	halt
target:	ret		   # Second part of combination
	irmovl $2,%ebx	   # Should not execute this
	halt
rtnp: 	irmovl $3,%edx     # Should not execute this
	halt
.pos 0x40
Stack:
# /* $end cjr-ys */
sim/y86-code/j-cc.ys0000700005644400000240000000042407533157264012707 0ustar  tmsgrad	      irmovl $1, %esi
	      irmovl $2, %edi
	      irmovl $4, %ebp
	      irmovl $-32, %eax
	      irmovl $64, %edx
	      subl %edx,%eax
	      je target
	      nop
              halt
target:
	      addl %esi,%edx
	      nop
              nop
              nop
	      halt
sim/y86-code/poptest.ys0000700005644400000240000000031607533157264013571 0ustar  tmsgrad# Test of Pop semantics for Y86
	irmovl $0x100,%esp  # Initialize stack pointer
	irmovl $0xABCD,%eax 
	pushl  %eax         # Put known value on stack
	popl   %esp         # Either get 0xABCD, or 0xfc
	halt
sim/y86-code/pushquestion.ys0000700005644400000240000000015307533157264014641 0ustar  tmsgrad	# Assembly Code to test semantics of pushl
	irmovl 0x100, %esp
	pushl %esp  # Ambiguous
	popl  %eax
	halt
sim/y86-code/pushtest.ys0000700005644400000240000000044707533157264013757 0ustar  tmsgrad# Test of Push semantics for Y86
	irmovl $0x100,%esp  # Initialize stack pointer
	rrmovl %esp,%eax    # Save stack pointer
	pushl %esp          # Push the stack pointer (old or new?)
	popl  %edx          # Get it back
	subl  %edx,%eax     # Compute difference.  Either 0 (old) or 4 (new).
	halt
sim/y86-code/prog1.ys0000700005644400000240000000015007533157264013117 0ustar  tmsgrad# prog1: Pad with 3 nop's
  irmovl $10,%edx
  irmovl  $3,%eax
  nop
  nop
  nop
  addl %edx,%eax
  halt
sim/y86-code/prog2.ys0000700005644400000240000000014207533157264013121 0ustar  tmsgrad# prog2: Pad with 2 nop's
  irmovl $10,%edx
  irmovl  $3,%eax
  nop
  nop
  addl %edx,%eax
  halt
sim/y86-code/prog3.ys0000700005644400000240000000013207533157264013121 0ustar  tmsgrad# prog3: Pad with 1 nop
  irmovl $10,%edx
  irmovl  $3,%eax
  nop
  addl %edx,%eax
  halt
sim/y86-code/prog4.ys0000700005644400000240000000012007533157265013120 0ustar  tmsgrad# prog4: No padding
  irmovl $10,%edx
  irmovl  $3,%eax
  addl %edx,%eax
  halt
sim/y86-code/prog5.ys0000700005644400000240000000026607533157264013133 0ustar  tmsgrad# prog5: Load/use hazard
  irmovl $128,%edx
  irmovl  $3,%ecx
  rmmovl %ecx, 0(%edx)
  irmovl  $10,%ebx
  mrmovl 0(%edx), %eax  # Load %eax
  addl %ebx,%eax        # Use %eax
  halt
sim/y86-code/prog6.ys0000700005644400000240000000013307533157264013125 0ustar  tmsgrad# prog6: Forwarding Priority
  irmovl $10,%edx
  irmovl  $3,%edx
  rrmovl %edx,%eax
  halt
sim/y86-code/prog7.ys0000700005644400000240000000060411171440133013110 0ustar  tmsgrad# Demonstration of return
# /* $begin prog7-ys */
# prog7
   irmovl Stack,%esp  # Initialize stack pointer
   call Proc          # procedure call
   irmovl $10,%edx    # return point
   halt
.pos 0x20
Proc:                 # Proc:
   ret                # return immediately
   rrmovl %edx,%ebx   # not executed
.pos 0x30
Stack:                # Stack: Stack pointer
# /* $end prog7-ys */
sim/y86-code/prog8.ys0000700005644400000240000000041307533157264013130 0ustar  tmsgrad# Demonstrate branch cancellation
# /* $begin prog8-ys */
# prog8
   xorl %eax,%eax 
   jne  target        # Not taken
   irmovl $1, %eax    # Fall through
   halt
target:
   irmovl $2, %edx    # Target
   irmovl $3, %ebx    # Target+1
# /* $end prog8-ys */
   halt

sim/y86-code/prog9.ys0000700005644400000240000000033007533157265013130 0ustar  tmsgrad# Exception handling
# /* $begin prog9-yo */
   xorl %eax,%eax 
   jne  Target      # Not taken
   irmovl $1, %eax  # Fall through
   halt
Target:
   .byte 0xFF       # Invalid instruction code
# /* $end prog9-yo */
sim/y86-code/prog10.ys0000700005644400000240000000046311167530212013170 0ustar  tmsgrad# prog10
    irmovl $1,%eax
    xorl %esp,%esp        # Set stack pointer to 0 and CC to 100
    pushl %eax            # Attempt to write to 0xfffffffc
    addl  %eax,%eax       # (Should not be executed) Would set CC to 000
    irmovl $2, %eax       # Not executed
    irmovl $3, %eax       # Not executed
sim/y86-code/ret-hazard.ys0000700005644400000240000000065607533157265014144 0ustar  tmsgrad/* $begin ret-hazard-ys */
# Test instruction that modifies %esp followed by ret
	irmovl mem,%ebx
	mrmovl  0(%ebx),%esp # Sets %esp to point to return point
	ret		     # Returns to return point 
	halt                 # 
rtnpt:  irmovl $5,%esi       # Return point
	halt
.pos 0x40
mem:	.long stack	     # Holds desired stack pointer
.pos 0x50
stack:	.long rtnpt          # Top of stack: Holds return point
/* $end ret-hazard-ys */
sim/y86-code/README0000700005644400000240000000116411502702141012355 0ustar  tmsgradThis directory contains examples of Y86 assembly code programs
(extension `.ys') used in Chapter 4 of CS:APP2e.

Given an assembly code file "file.ys", you can assemble it with the
command "make file.yo".  The resulting file is in the "object code"
format described in the book.

You can assemble and simulate all the test programs in this directory
as follows:

PIPE: make testpsim
SEQ: make testssim
SEQ+: make testssim+

Each of these commands will cause a number of programs to be assembled
and simulated.  Lots of things will scroll by, but you should see the message
"ISA Check Succeeds" for each of the programs tested.

sim/y86-code/Makefile0000700005644400000240000000276711502714512013154 0ustar  tmsgradCC=gcc
CFLAGS=-Wall -O2

ISADIR = ../misc
YAS=$(ISADIR)/yas
YIS=$(ISADIR)/yis
PIPE=../pipe/psim
SEQ=../seq/ssim
SEQ+ =../seq/ssim+

YOFILES = abs-asum-cmov.yo abs-asum-jmp.yo asum.yo asumr.yo asumi.yo asuml.yo cjr.yo j-cc.yo poptest.yo pushquestion.yo pushtest.yo prog1.yo prog2.yo prog3.yo prog4.yo prog5.yo prog6.yo prog7.yo prog8.yo prog9.yo prog10.yo ret-hazard.yo

PIPEFILES = asum.pipe asumr.pipe cjr.pipe j-cc.pipe poptest.pipe pushquestion.pipe pushtest.pipe prog1.pipe prog2.pipe prog3.pipe prog4.pipe prog5.pipe prog6.pipe prog7.pipe prog8.pipe ret-hazard.pipe

SEQFILES = asum.seq asumr.seq cjr.seq j-cc.seq poptest.seq pushquestion.seq pushtest.seq prog1.seq prog2.seq prog3.seq prog4.seq prog5.seq prog6.seq prog7.seq prog8.seq ret-hazard.seq

SEQ+FILES = asum.seq+ asumr.seq+ cjr.seq+ j-cc.seq+ poptest.seq+ pushquestion.seq+ pushtest.seq+ prog1.seq+ prog2.seq+ prog3.seq+ prog4.seq+ prog5.seq+ prog6.seq+ prog7.seq+ prog8.seq+ ret-hazard.seq+

.SUFFIXES:
.SUFFIXES: .c .s .o .ys .yo .yis .pipe .seq .seq+

all: $(YOFILES) 

test: testpsim testssim testssim+

testpsim: $(PIPEFILES)
	grep "ISA Check" *.pipe
	rm $(PIPEFILES)

testssim: $(SEQFILES)
	grep "ISA Check" *.seq
	rm $(SEQFILES)

testssim+: $(SEQ+FILES)
	grep "ISA Check" *.seq+
	rm $(SEQ+FILES)

.ys.yo:
	$(YAS) $*.ys

.yo.yis: $(YIS)
	$(YIS) $*.yo > $*.yis

.yo.pipe: $(PIPE)
	$(PIPE) -t $*.yo > $*.pipe

.yo.seq: $(SEQ)
	$(SEQ) -t $*.yo > $*.seq

.yo.seq+: $(SEQ+)
	$(SEQ+) -t $*.yo > $*.seq+

clean:
	rm -f *.o *.yis *~ *.yo *.pipe *.seq *.seq+ core
sim/ptest/0000700005644400000240000000000011715057306011305 5ustar  tmsgradsim/ptest/README0000700005644400000240000000301107533157263012171 0ustar  tmsgradThis directory contains Perl scripts that provide comprehensive
regression testing of the different Y86 simulators.  There are four
basic test types, implemented as four different scripts:

	optest.pl:	Tests each individual instruction type
	jtest.pl:	Tests all of the jump types under different conditions
	ctest.pl:	Tests different pipeline control combinations
	htest.pl:	Tests many different hazard possibilities
			This involves running 864+ tests, so it takes a while.

Each of the tests has the following optional arguments:
	-s simfile	Use simfile as simulator (default ../pipe/psim).
	-i		Test the iaddl instruction
	-l		Test the leave instruction

You can use make to run all four test programs.  Options to make include:

	SIM=simfile
	TFLAGS=<any flags you want to give to the testing scripts>

For example, you could say:
	make SIM=../pipe/psim TFLAGS=-il
to test the pipeline simulator including both the iaddl and leave instructions.

When the test program detects an erroneous simulation, it leaves the
.ys file in the directory (ordinarily it deletes the test code it
generates).  You can then run a simulator (the GUI version is
especially helpful here) on one of these failing cases.  Suppose the
failing test is in file bad-test.ys.  Then you can execute "make
bad-test.yo" to create the object code, and simulate it with one of
the simulators.

Note that the standard test code only detects functional bugs, where the
processor simulation produces different results than would be
predicted by simulating at the ISA level.  
sim/ptest/ctest.pl0000700005644400000240000000437411254223323012767 0ustar  tmsgrad#!/usr/bin/perl 
#!/usr/local/bin/perl 
# Test for pipeline hazard combinations

use Getopt::Std;
use lib ".";
use tester;

cmdline();

# Instruction templates
$tcount = 8;

@templates = 
(
 "||jne target\n\thalt\ntarget:|", # M
 "|||ret",        # R

 "||mrmovl (%eax),%esp|ret", # G1a
 "|mrmovl (%eax),%esp||ret", # G1b
 "mrmovl (%eax),%esp|||ret", # G1c
 "||irmovl \$3,%eax|rrmovl %eax,%edx", # G2a
 "|irmovl \$3,%eax||rrmovl %eax,%edx", # G2b
 "irmovl \$3,%eax|||rrmovl %eax,%edx", # G2c
);

# Try combining two templates to generate test sequence
sub make_test
{
    local ($t1, $t2) = @_;
    $ok = 1;
    @test1 = split(/\|/, $t1);
    @test2 = split(/\|/, $t2);
    for ($i = 0; $i < 4; $i++) {
	if ($test1[$i] eq "") {
	    if ($test2[$i] eq "") {
		$test[$i] = "nop";
	    } else {
		$test[$i] = $test2[$i];
	    }
	} else {
	    if ($test2[$i] eq "") {
		$test[$i] = $test1[$i];
	    } else {
		if ($test1[$i] eq $test2[$i]) {
#		    $ok = 0;
		    $test[$i] = $test1[$i];
		} else {
		    $ok = 0;
		    $test[$i] = "XXX";
		}
	    }
	}
    }
    if ($ok) {
	&gen_test($test[0], $test[1], $test[2], $test[3]);
    }

}

$testcnt = 0;

# Generate test with 4 instructions inserted
sub gen_test 
{
    local ($i1, $i2, $i3, $i4) = @_;
    $tname = "c-$testcnt";
    $testcnt++;
    open(YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	 
    print YFILE <<STUFF;
	irmovl Stack1,%esp
	irmovl rtnpt,%edx
	rmmovl %edx,(%esp)   # Put return point on top of Stack1
	irmovl Stack2,%eax
	rmmovl %esp,(%eax)   # Put Stack1 on top of Stack2
	irmovl Stack3,%esp   # Point to Stack3
        pushl %edx
        rrmovl %esp,%ebp
	irmovl \$3,%edx       # Initialize
	xorl   %ebx,%ebx     # Set condition codes to ZF=1,SF=0,OF=0
#       Here's where the 4 instruction sequence goes
        $i1
        $i2
        $i3
        $i4
#	Now finish things off
	irmovl \$3,%ebx       # Not reached when sequence ends with ret
	halt                  # 
rtnpt:  irmovl \$5,%esi       # Return point
	halt
.pos 0x60
	Stack1:
.pos 0x68
	Stack2:
.pos 0x70
	Stack3:
        halt
STUFF
    close YFILE;
    &run_test($tname);
}


$n = @templates;
for ($idx1 = 0; $idx1 < $n; $idx1++) {
    for ($idx2 = $idx1+1; $idx2 < $n; $idx2++) {
	&make_test($templates[$idx1],$templates[$idx2]);
    }
}

&test_stat();

sim/ptest/htest.pl0000700005644400000240000001053511166262660013001 0ustar  tmsgrad#!/usr/bin/perl 
#!/usr/local/bin/perl 
# Test for pipeline hazards

use Getopt::Std;
use lib ".";
use tester;

cmdline();

# Destination Instructions
@dest =
(
 # Having %eax as destination
 "1:rrmovl %ecx,%eax",
 "1:irmovl \$0x101,%eax",
 "1:mrmovl 0(%ebp),%eax",
 "1:addl   %eax,%eax",
 "1:popl   %eax",
 "1:cmovne %ecx,%eax", # Not taken
 "1:cmove  %ecx,%eax", # Taken
 # Instructions having %ebp as destination
 "2:rrmovl %eax,%ebp",
 "2:irmovl \$0x100,%ebp",
 "2:mrmovl 4(%ebp),%ebp",
 "2:addl   %eax,%ebp",
 "2:popl   %ebp",
 "2:cmovne %eax,%ebp", # Not taken
 "2:cmove  %eax,%ebp", # Taken
 # Instructions having %esp as destination
 "3:rrmovl %ebp,%esp",
 "3:irmovl \$0x104,%esp",
 "3:mrmovl 4(%ebp),%esp",
 "3:addl   %eax,%esp",
 "3:popl   %ebp",
 "3:pushl  %eax",
 "3:pushl  %esp",
 "3:popl   %esp",
 "1:cmovne %ebp,%esp", # Not taken
 "1:cmove  %ebp,%esp"  # Taken
 );

if ($testiaddl) {
    @dest = (@dest,
	     "1:iaddl \$0x201,%eax",
	     "2:iaddl \$0x4,%ebp",
	     "3:iaddl \$0x4,%esp",);
}

if ($testleave) {
    @dest = (@dest,  "2:leave", "3:leave");
}

@src = 
(
 # Instructions having %eax as source
 "1:rrmovl %eax,%ebp",
 "1:rmmovl %eax,0(%ebp)",
 "1:rmmovl %ebp,0(%eax)",
 "1:mrmovl 4(%eax),%ebp",
 "1:addl   %eax,%ebp",
 "1:addl   %ebp,%eax",
 "1:addl   %eax,%eax",
 "1:pushl  %eax",
 # Instructions having %ebp as source
 "2:rrmovl %ebp,%ebp",
 "2:rmmovl %ebp,4(%ebp)",
 "2:rmmovl %eax,0(%ebp)",
 "2:mrmovl 8(%ebp),%eax",
 "2:addl   %ebp,%eax",
 "2:addl   %eax,%ebp",
 "2:addl   %ebp,%ebp",
 "2:pushl  %ebp",
 # Instructions having %esp as source
 "3:rrmovl %esp,%ebp",
 "3:rmmovl %esp,4(%ebp)",
 "3:rmmovl %eax,-4(%esp)",
 "3:mrmovl 4(%esp),%eax",
 "3:addl   %esp,%eax",
 "3:addl   %eax,%esp",
 "3:addl   %esp,%esp",
 "3:pushl  %esp",
 "3:ret"
 );

if ($testiaddl) {
    @src = (@src,
	    "1:iaddl \$0x301,%eax",
	    "2:iaddl \$0x8,%ebp",
	    "3:iaddl \$0x8,%esp");
}

if ($testleave) {
    @src = (@src,  "2:leave", "3:leave");
}

# Generate test with 4 instructions inserted
sub gen_test 
{
    local ($i1, $i2, $i3, $i4) = @_;
    print YFILE <<STUFF;
    # Preamble.  Initialize memory and registers
    irmovl \$0xf5,%eax
    irmovl \$0,%ebp
    rmmovl %eax,0xf0(%ebp)
    irmovl \$0xf7,%eax
    rmmovl %eax,0xf4(%ebp)
    irmovl \$0xfb,%eax
    rmmovl %eax,0xf8(%ebp)
    irmovl \$0xff,%eax
    rmmovl %eax,0xfc(%ebp)
    irmovl \$0x100,%ebp
    irmovl \$0x10c,%esp
    xorl %eax,%eax      # Set Z condition code
    irmovl \$0x80,%eax
    # Test 4 instruction sequence
    $i1
    $i2
    $i3
    $i4
    # Put in another instruction
    rrmovl %esp,%ebp
    # Complete
    halt

.pos 0x08
     .long pos01
     .long pos02
     .long pos03
     .long pos04
     .long pos05
     .long pos06
pos01:
     halt
pos02:
     halt
pos03:
     halt
pos04:
     halt
pos05:
     halt
pos06:
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt
     halt

.pos 0x100
    .long pos11
    .long pos12
    .long pos13
    .long pos14
    .long pos15
    .long pos16
pos11:
    halt
pos12:
    halt
pos13:
    halt
pos14:
    halt
pos15:
    halt
pos16:
    halt
    halt
    halt
    halt
    halt
    halt
    halt
    halt
    halt

.pos 0x180
    .long pos21
    .long pos22
    .long pos23
    .long pos24
    .long pos25
    .long pos26
pos21:
    halt
pos22:
    halt
pos23:
    halt
pos24:
    halt
pos25:
    halt
pos26:
    halt
    halt
    halt
    halt
    halt
    halt
    halt
    halt
    halt
STUFF
}

# Generate pairwise tests
$di = 0;
$si = 0;
foreach $dline (@dest) {
    foreach $sline (@src) {
	($dtype, $d) = split /:/, $dline;
	($stype, $s) = split /:/, $sline;
	if ($dtype == $stype) {
	    # Two instructions with 2 nops between them
	    $tname = "hnn-$di-$si";
	    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	    &gen_test($d, "nop", "nop", $s);
	    close  YFILE;
	    &run_test($tname);

	    # Two instructions with nop between them
	    $tname = "hn-$di-$si";
	    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	    &gen_test($d, "nop", "", $s);
	    close  YFILE;
	    &run_test($tname);

	    # Two instructions in succession
	    $tname = "h-$di-$si";
	    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	    &gen_test($d, "", "", $s);
	    close  YFILE;
	    &run_test($tname);
	}
	$si++;
    }
    $si = 0;
    $di++;
}

&test_stat();
sim/ptest/jtest.pl0000700005644400000240000000452407533157263013011 0ustar  tmsgrad#!/usr/bin/perl 
#!/usr/local/bin/perl 
# Test jump instructions

use Getopt::Std;
use lib ".";
use tester;

cmdline();

@vals = (32, 64);

@instr = ("jmp", "jle", "jl", "je", "jne", "jge", "jg", "call");

# Create set of forward tests
foreach $t (@instr) {
    foreach $va (@vals) {
	foreach $vb (@vals) {
	    $tname = "jf-$t-$va-$vb";
	    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	    print YFILE <<STUFF;
	      irmovl stack, %esp
	      irmovl \$1, %esi
	      irmovl \$2, %edi
	      irmovl \$4, %ebp
	      irmovl \$$va, %eax
	      irmovl \$$vb, %edx
	      subl %edx,%eax
	      $t target
	      addl %esi,%eax
	      addl %edi,%eax
	      addl %ebp,%eax
              halt
target:
	      addl %esi,%edx
	      addl %edi,%edx
	      addl %ebp,%edx
              nop
              nop
	      halt
.pos 0x100
stack:
STUFF
	    close YFILE;
	    &run_test($tname);
	}
    }
}

# Create set of backward tests
foreach $t (@instr) {
    foreach $va (@vals) {
	foreach $vb (@vals) {
	    $tname = "jb-$t-$va-$vb";
	    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	    print YFILE <<STUFF;
	      irmovl stack, %esp
	      irmovl \$1, %esi
	      irmovl \$2, %edi
	      irmovl \$4, %ebp
	      irmovl \$$va, %eax
	      irmovl \$$vb, %edx
	      jmp skip
	      halt
target:
	      addl %esi,%edx
	      addl %edi,%edx
	      addl %ebp,%edx
              nop
              nop
	      halt
skip:
	      subl %edx,%eax
	      $t target
	      addl %esi,%eax
	      addl %edi,%eax
	      addl %ebp,%eax
              halt
.pos 0x100
stack:
STUFF
	    close YFILE;
	    &run_test($tname);
	}
    }
}


if ($testiaddl) {
    # Create set of forward tests using iaddl
    foreach $t (@instr) {
	foreach $va (@vals) {
	    foreach $vb (@vals) {
		$tname = "ji-$t-$va-$vb";
		open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	      print YFILE <<STUFF;
	      irmovl stack, %esp
	      irmovl \$1, %esi
	      irmovl \$2, %edi
	      irmovl \$4, %ebp
	      irmovl \$$va, %eax
	      iaddl \$-$vb,%eax
	      $t target
	      addl %esi,%eax
	      addl %edi,%eax
	      addl %ebp,%eax
              halt
target:
	      addl %esi,%edx
	      addl %edi,%edx
	      addl %ebp,%edx
              nop
              nop
	      halt
.pos 0x100
stack:
STUFF
                close YFILE;
		&run_test($tname);
	    }
	}
    }
}

&test_stat();


sim/ptest/optest.pl0000700005644400000240000000364707533157263013203 0ustar  tmsgrad#!/usr/bin/perl 
#!/usr/local/bin/perl 
# Test single instructions in pipeline

use Getopt::Std;
use lib ".";
require tester;

cmdline();

@vals = (0x100, 0x020, 0x004);

@instr = ("rrmovl", "addl", "subl", "andl", "xorl");
@regs = ("edx", "ebx", "esp");

foreach $t (@instr) {
    foreach $ra (@regs) {
	foreach $rb (@regs) {
	    $tname = "op-$t-$ra-$rb";
	    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	    print YFILE <<STUFF;
	      irmovl \$$vals[0], %$ra
	      irmovl \$$vals[1], %$rb
	      nop
	      nop
	      nop
	      $t %$ra,%$rb
	      nop
	      nop
	      halt
STUFF
	    close YFILE;
	    run_test($tname);
	}
    }
}

if ($testiaddl) {
    foreach $ra (@regs) {
	foreach $val (@vals) {
	    $tname = "op-iaddl-$val-$ra";
	    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	    print YFILE <<STUFF;
	    irmovl \$$val, %$ra
	    nop
	    nop
	    nop
            iaddl \$-32, %$ra
	    nop
	    nop
	    halt
STUFF
            close YFILE;
	    run_test($tname);
	}
    }
}

@instr = ("pushl", "popl");
@regs = ("edx", "esp");

foreach $t (@instr) {
    foreach $ra (@regs) {
	$tname = "op-$t-$ra";
	open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	print YFILE <<STUFF;
        irmovl \$0x200,%esp
	irmovl \$$vals[1], %eax
	nop
	nop
        nop
        rmmovl %eax, 0(%esp)
	irmovl \$$vals[2], %eax
	nop
        nop
        nop
	rmmovl %eax, -4(%esp)
	irmovl \$$vals[0], %edx
	nop
        nop
        nop
	$t %$ra
	nop
	nop
        halt
STUFF
	close YFILE;
	&run_test($tname);
    }
}

if ($testleave) {
    $tname = "op-leave";
    open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
    print YFILE <<STUFF;
    irmovl \$0x100,%ebp
    irmovl \$0x123,%eax
    irmovl \$0xabc,%edx
    nop
    nop
    rmmovl %eax, 0(%ebp)
    rmmovl %edx, -4(%ebp)
    nop
    nop
    nop
    leave
    nop
    nop
    halt
STUFF
    close YFILE;
    &run_test($tname);
}

&test_stat();
sim/ptest/etest.pl0000700005644400000240000000254611167523735013005 0ustar  tmsgrad#!/usr/bin/perl 
#!/usr/local/bin/perl 
# Test for exception followed by state-setting instruction

use Getopt::Std;
use lib ".";
use tester;

cmdline();

# State setting instructions
@stateset =
(
 # Set condition codes
 "andl %ecx,%ecx",
 # Write to memory
 "rmmovl %ecx,(%eax)"
);

# Exception causing instructions
@exceptset = 
(
 # halt
 "halt",
 # Invalid instruction
 ".byte 0xFF",
 # Invalid write address
 "rmmovl %eax,0xF0000000(%eax)"
);

# Generate test with 3 instructions inserted
sub gen_test 
{
    local ($i1, $i2, $i3) = @_;
    print YFILE <<STUFF;
    # Preamble.  Initialize memory and registers
    irmovl \$-1,%ecx    # Create nonzero value
    irmovl \$0x100,%eax
    xorl %edx,%edx      # Set Z condition code
    # Test 3 instruction sequence
    $i1
    $i2
    $i3
    # Complete
    nop
    nop
    halt
STUFF
}

# Generate pairwise tests
$ei = 0;
$si = 0;
foreach $e (@exceptset) {
    foreach $s (@stateset) {
        # Two instructions with 1 nop between them
	$tname = "en-$ei-$si";
	open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	&gen_test($e, "nop", $s);
	close  YFILE;
	&run_test($tname);

	# Two instructions in succession
	$tname = "e-$ei-$si";
	open (YFILE, ">$tname.ys") || die "Can't write to $tname.ys\n";
	&gen_test($e, "", $s);
	close  YFILE;
	&run_test($tname);
	$si++;
      }
    $si = 0;
    $ei++;
}

&test_stat();
sim/ptest/tester.pm0000700005644400000240000001011311253760635013153 0ustar  tmsgrad# Configuration information for processor tests.

# Common declarations for testing code

# Where's the assembler?
$yas = "../misc/yas";

# Which simulator is being tested?
$sim = "../pipe/psim";

# By default, don't test leave instruction.
$testleave = 0;

# By default, don't test iaddl instruction.
$testiaddl = 0;

# Where should result files be placed?
$outputdir = ".";

# Generate performance targets?
$gen_perf = 0;
# Check performance targets?
$check_perf = 0;

# File with performance targets
$perf_file = "";

# Should this be a test of a Verilog implementation?
$test_vlog = 0;

# What model should be used for Verilog?
$vmodel = "pipe-std";

# What program does the Verilog testing
$vtest = "../verilog/test-sim.pl";

$tcount = 0;
$ecount = 0;
$pecount = 0;

sub run_test
{
    local ($tname) = @_;
##    print("Running test $tname\n");
    if ($test_vlog) {
	&run_vlog_test($tname);
    } else {
	&run_sim_test($tname);
    }
}

sub run_sim_test
{
    local ($tname) = @_;
    system "$yas $tname.ys" || die "Can't open file $tname.ys\n";
    local $result = `$sim -v 0 -t $tname.yo`;
    if (!($result =~ "Succeed")) {
	print "Test $tname failed\n";
	$ecount++;
	if (!($outputdir eq ".")) {
	  system "mv $tname.ys $outputdir";
	}
    } else {
	system "rm $tname.ys";
    }
    if ($gen_perf) {
	$_ = $result;
	m#CPI:[^0-9]*([0-9]+)[^0-9]*([0-9]+)#;
	$cycles = $1;
	$instructions = $2;
	print "$tname:$cycles:$instructions\n";
    }
    if ($check_perf) {
	$_ = $result;
	m#CPI:[^0-9]*([0-9]+)[^0-9]*([0-9]+)#;
	$tcycles = $1;
	$tinstructions = $2;
	$p = `grep $tname $perf_file` || die "Couldn't open file $perf_file\n";
	chomp $p;
	($pname, $pcycles, $pinstructions) = split /:/, $p;
	if ($tcycles != $pcycles) {
	    $pecount++;
	    print "Test $tname.\tMeasured cycles=$tcycles != Target cycles=$pcycles\n";
	}
    }
    $tcount++;
    system "rm $tname.yo";
}

sub run_vlog_test
{
    local ($tname) = @_;
    local $proc;
    local $version;
    local $dir;
    local $flags = "";
    if ($vmodel =~ /(pipe|seq|seq\+)-(.*)/) {
      $proc = $1;
      $version = $2;
      if ($proc =~ "seq") {
	$dir = "seq";
      } else {
	$dir = "pipe";
      }
      $flags = "-p ../verilog/components/$proc-proc.v -H ../$dir/$proc-$version.hcl";
    }
    print "Running '$vtest -a $tname $flags'\n";
    local $result = `$vtest -a $tname $flags`;
    if (!($result =~ "Results match")) {
	print "Test $tname failed\n";
	$ecount++;
	if (!($outputdir eq ".")) {
	  system "mv $tname.ys $outputdir";
	}
    } else {
	system "rm $tname.ys";
    }
    $tcount++;
}

sub test_stat
{
    if ($ecount == 0) {
	print "  All $tcount ISA Checks Succeed\n";
    } else {
	print "  $ecount/$tcount ISA Checks Failed\n";
    }
    if ($check_perf) {
	if ($pecount == 0) {
	    print "  All $tcount Performance Checks Succeed\n";
	} else {
	    print "   $pecount/$tcount Performance Checks Failed\n";
	}
    }
}

sub cmdline {
    # parse command line arguments
    getopts('hils:Pp:d:Vm:');

    if ($opt_h) {
        print STDERR "Usage $argv[0] [-h] [-i] [-s <sim>] [-P] [-p <pfile>]\n";
        print STDERR "   -h       print Help message\n";
        print STDERR "   -i       test iaddl instruction\n";
        print STDERR "   -l       test leave instruction\n";
        print STDERR "   -s <sim> Specify simulator\n";
        print STDERR "   -d <dir> Specify directory for counterexamples\n";
        print STDERR "   -P Generate performance data\n";
        print STDERR "   -p <version> Check using performance file <pfile>\n";
        print STDERR "   -V       test Verilog implementation\n";
        print STDERR "   -m <model> Model for Verilog\n";
        die "\n";
    }

    if ($opt_i) {
	$testiaddl = 1;
    }

    if ($opt_l) {
	$testleave = 1;
    }

    if ($opt_d) {
      $outputdir = $opt_d;
    }

    if ($opt_P) {
	$gen_perf = 1;
    }

    if ($opt_p) {
	$check_perf = 1;
	$perf_file = $opt_p;
    }

    if ($opt_s) {
	$sim = $opt_s;
    }
    if ($opt_V) {
	$test_vlog = 1;
	if ($opt_m) {
	  $vmodel = $opt_m;
	}
    } else {
	print "Simulating with $sim\n";
    }
}

# Perl gives error messages without the following line !?!
$junk = 1;





sim/ptest/Makefile0000700005644400000240000000042107533157263012753 0ustar  tmsgradSIM=../pipe/psim
TFLAGS=

ISADIR = ../misc
YAS=$(ISADIR)/yas

.SUFFIXES: .ys .yo

.ys.yo:
	$(YAS) $*.ys

test:
	./optest.pl -s $(SIM) $(TFLAGS)
	./jtest.pl -s $(SIM) $(TFLAGS)
	./ctest.pl -s $(SIM) $(TFLAGS)
	./htest.pl -s $(SIM) $(TFLAGS)

clean:
	rm -f *.o *~ *.yo *.ys

sim/Makefile0000600005644400000240000000231011715053741011603 0ustar  tmsgrad# Comment this out if you don't have Tcl/Tk on your system

GUIMODE=-DHAS_GUI

# Modify the following line so that gcc can find the libtcl.so and
# libtk.so libraries on your system. You may need to use the -L option
# to tell gcc which directory to look in. Comment this out if you
# don't have Tcl/Tk.

TKLIBS=-L/usr/lib -ltk8.5 -ltcl8.5

# Modify the following line so that gcc can find the tcl.h and tk.h
# header files on your system. Comment this out if you don't have
# Tcl/Tk.

TKINC=-isystem /usr/include/tcl8.5

##################################################
# You shouldn't need to modify anything below here
##################################################

# Use this rule (make all) to build the Y86 tools. The variables you've
# assigned to GUIMODE, TKLIBS, and TKINC will override the values that
# are currently assigned in seq/Makefile and pipe/Makefile.
all:
	(cd misc; make all)
	(cd pipe; make all GUIMODE=$(GUIMODE) TKLIBS="$(TKLIBS)" TKINC="$(TKINC)")
	(cd seq; make all GUIMODE=$(GUIMODE) TKLIBS="$(TKLIBS)" TKINC="$(TKINC)")
	(cd y86-code; make all)

clean:
	rm -f *~ core
	(cd misc; make clean)
	(cd pipe; make clean)
	(cd seq; make clean)
	(cd y86-code; make clean)
	(cd ptest; make clean)

sim/README0000600005644400000240000000670511336054772011043 0ustar  tmsgrad/***********************************************************************
 * Y86 Tools (Student Distribution)
 *
 * Copyright (c) 2002, 2010 R. Bryant and D. O'Hallaron,
 * All rights reserved. May not be used, modified, or copied
 * without permission.
 ***********************************************************************/ 

This directory contains the student distribution of the Y86 tools.  It
is a proper subset of the master distribution, minus the solution
files found in the master distribution.

yas		Y86 assembler
yis		Y86 instruction (ISA) simulator 
hcl2c		HCL to C translator
hcl2v		HCL to Verilog translator
ssim		SEQ simulator
ssim+		SEQ+ simulator
psim		PIPE simulator

*************************
1. Building the Y86 tools
*************************

The Y86 simulators can be configured to support TTY and GUI
interfaces. A simulator running in TTY mode prints all information
about its run-time behavior on the terminal.  It's harder to understand what's
going on, but useful for automated testing, and doesn't require any
special installation features.  A simulator running in GUI mode uses a
fancy graphical user interface.  Nice for visualizing and debugging,
but requires installation of Tcl/Tk on your system.

To build the Y86 tools, perform the following steps:

NOTE: If your instructor prepared this distribution for you, then you
can skip Step 1 and proceed directly to Step 2. The Makefile will
already have the proper values for GUIMODE, TKLIBS, and TKINC for your
system.

Step 1. Decide whether you want the TTY or GUI form of the simulators,
and then modify ./Makefile in this directory accordingly. (The changes
you make to the variables in this Makefile will override the values
already assigned in the Makefiles in the seq and pipe directories.)

Building the GUI simulators: If you have Tcl/Tk installed on your
system, then you can build the GUI form by initializing the GUIMODE,
TKLIBS, and TKINC variables, as appropriate for your system. (The
default values work for Linux systems.) 

Assigning GUIMODE=-DHAS_GUI causes the necessary GUI support code in
the simulator sources to be included.  The TKLIBS variable tells gcc
where to look for the libtcl.so and libtk.so libraries. And the TKINC
variable tells gcc where to find the tcl.h and tk.h header files.

Building the TTY simulators: If you don't have Tcl/Tk installed on
your system, then build the TTY form by commenting out all three of
these variables (GUIMODE, TKLIBS, and TKINC) in the Makefile.

Step 2: Once you've modified the Makefile to build either the GUI or
TTY form, then you can construct the entire set of Y86 tools by typing 

	unix> make clean; make

********
2. Files
********

Makefile
	Builds the Y86 tools

README
	This file

misc/	
	Source files for the Y86 assembler yas, the Y86 instruction
	simulator yis, and the isa.c file that is used by the -t option
	of the processor simulators to check the results against the
	ISA simulation.  Also contains files for the programs
	hcl2c and hcl2v

seq/	
	Code for the SEQ and SEQ+ simulators.  Contains HCL files for
	labs and homework problems that involve modifying SEQ.

pipe/	
	Code for the PIPE simulator.  Contains HCL files for labs and
	homework problems that involve modifying PIPE.

y86-code/
	Example .ys files from CS:APP and scripts for conducting
	automated benchmark teseting of the new processor designs.

ptest/
	Automated regression testing scripts for testing processor designs.

verilog/
	System for producing Verilog designs from HCL code