INS_RAM.sv

module INS_RAM import details::*;
#( 
    parameter mem_init_t mem_init = no, 
    parameter WIDTH = 8,
    parameter DEPTH = 256,
    parameter ADDR_WIDTH = $clog2(DEPTH)
)
(
    input logic clk, wrEn,
    input logic [WIDTH-1:0]dataIn,
    input logic [ADDR_WIDTH-1:0]addr,
    output logic [WIDTH-1:0]dataOut
);


logic [ADDR_WIDTH-1:0]addr_reg;

logic [WIDTH-1:0]memory[0:DEPTH-1] ;

/// initialize memory for simulation  /////////
initial begin
    if (mem_init == yes) begin
        $readmemb("D:/ACA/SEM5_TRONIC_ACA/1_EN3030 _Circuits_and_Systems_Design/2020/learnFPGA/learn_processor_design/matrix_multiply/system_verilog_design_3_1_github/Multicore_processor_matrix_multiply/matrix_generation_for_tb/9_ins_mem_tb.txt", memory);
    end
end
///////////////////////////////////////////////

always_ff @(posedge clk) begin
    addr_reg <= addr;
    if (wrEn) begin
        memory[addr] <= dataIn;   // write requires only 1 clk cyle. 
    end
end
assign dataOut = memory[addr_reg];   // address is registered. Need 2 clk cycles to read.

endmodule : INS_RAM