From c59299999743631187a0a23a1b9d1eda35d79a92 Mon Sep 17 00:00:00 2001 From: follower Date: Wed, 1 Jul 2015 03:33:09 +1200 Subject: [PATCH] Fix a number of typos --- README.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index 5073d15e4..0efea535b 100644 --- a/README.md +++ b/README.md @@ -32,11 +32,11 @@ To open the DFU settings click the *Settings* button in the top toolbar when on **Packet receipt notification procedure** - This switch allows you to turn on and off the packet receipt notification procedure. During the DFU operation the phone sends 20-bytes size packets to the DFU target. It may be configured that once every N packets the phone stops sending and awaits for the Packet Receipt Notification from the device. This feature is required by Android to sync sending data with the remote device, as the callback `onCharacteristicWrite(...)` that follows calling method `gatt.writeCharacteristic(...)` is invoked when the packet is written to the outgoing queue, not when physically transmitted. With this procedure disabled it may happen that the outgoing buffer will be overloaded and the communication stops. The same error may happen when the N number is too big, about 300-400. The receipt notification ensures that the outgoing queue is empty and the DFU target received all packets successfully. -**Number of packets** - This field allows you to set the N number describe above. By default it is set to 10. Depending on the phone model, devices may send and receive different number of packets in each connection intarval. Nexus 4, for instance, may send just 1 packet (and receive 3 notifications) while Nexus 5 or 6 send and receive up to 4 packets. By customizing this value you may check which value allows for the fastest transmission on your phone/tablet. +**Number of packets** - This field allows you to set the N number describe above. By default it is set to 10. Depending on the phone model, devices may send and receive different number of packets in each connection interval. Nexus 4, for instance, may send just 1 packet (and receive 3 notifications) while Nexus 5 or 6 send and receive up to 4 packets. By customizing this value you may check which value allows for the fastest transmission on your phone/tablet. -**MBR size** - This value is used only to convert HEX files into BIN files. If your packet is already in the BIN format, this value is ignorred. The data from addresses lower then this value are being skipped while converting HEX to BIN. This is to prevent from sending the MBR (Master Boot Record) part from the HEX file that contains the Soft Device. The compiled Soft Device contains data that starts at address 0x0000 and contains the MBR. It is followed by the jump to address 0x1000 (default MBR size) where the Soft Device firmware starts. Only the Soft Device part must be sent over DFU. +**MBR size** - This value is used only to convert HEX files into BIN files. If your packet is already in the BIN format, this value is ignored. The data from addresses lower then this value are being skipped while converting HEX to BIN. This is to prevent from sending the MBR (Master Boot Record) part from the HEX file that contains the Soft Device. The compiled Soft Device contains data that starts at address 0x0000 and contains the MBR. It is followed by the jump to address 0x1000 (default MBR size) where the Soft Device firmware starts. Only the Soft Device part must be sent over DFU. -**Keep bond information** - When upgrading the application on a bonded device the DFU bootloader may be configured to preserve some pages of the application's memory intact, so that the new application may read them. The new application must know the old data format in order to read them correctly. Our HRS DFU sample stores the Long Ter Key (LTK) and the Service Attributes in two first pages. However, the DFU Booltoader, by default, clears the whole application's memory when the new application upload completes, and the bond information is lost. In order to configure the number of pages to be preserved set the **DFU_APP_DATA_RESERVED** value in the *dfu_types.h* file in the DFU bootloader code (line ~56). To preserve two pages the value should be set to 0x0800. When your DFU bootloader has been modified to keep the bond information after updating the application set the switch to ON. Otherwise the bond information will be removed from the phone. +**Keep bond information** - When upgrading the application on a bonded device the DFU bootloader may be configured to preserve some pages of the application's memory intact, so that the new application may read them. The new application must know the old data format in order to read them correctly. Our HRS DFU sample stores the Long Term Key (LTK) and the Service Attributes in two first pages. However, the DFU Bootloader, by default, clears the whole application's memory when the new application upload completes, and the bond information is lost. In order to configure the number of pages to be preserved set the **DFU_APP_DATA_RESERVED** value in the *dfu_types.h* file in the DFU bootloader code (line ~56). To preserve two pages the value should be set to 0x0800. When your DFU bootloader has been modified to keep the bond information after updating the application set the switch to ON. Otherwise the bond information will be removed from the phone. ### Dependencies @@ -60,5 +60,5 @@ The graph in HRM profile is created using the [AChartEngine v1.1.0](http://www.a - Nexus 4, 5 and 7 with Android 4.4 fails if reconnecting when Gatt Server is running. - Reset of Bluetooth adapter may be required if other errors appear. -### Know problems with DFU settings: +### Known problems with DFU settings: - Setting Package Receipt Notification to OFF or less than ~400 will not work on some phones, e.g. Nexus 4, Nexus 7. On Nexus 5 with Android 4.4.4 it increases upload speed to 18kb/4.3 sec.