Winder only runs CCW regardless of setting

[markbyrne]

I have set CW, 800 with a start time of 10:00, but noticed it was running CCW. When I manually start and stop it also only runs CCW. It was working properly yesterday...

[mwood77]

That's strange. Have you refreshed the page on Winderoo.local to make sure the GUI is up to date?

Also, you can query winderoo's state directly with:

winderoo.local/api/status

I'm away from my winders right now, but the response should have a field called "direction" and the possible values that it could return are: CW | BOTH | CCW

[markbyrne]

Thank you for the reply, I have been away as well but I will check when I get back and let you know

…

On Wed, Sep 11, 2024, 19:57 mwood77 ***@***.***> wrote: That's strange. Have you refreshed the page on Winderoo.local to make sure the GUI is up to date? Also, you can query winderoo's state directly with: winderoo.local/api/status I'm away from my winders right now, but the response should have a field called "direction" and the possible values that it could return are: CW | BOTH | CCW — Reply to this email directly, view it on GitHub <#64 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA4WEDPEWTC3GSKFREIO7F3ZWD7IBAVCNFSM6AAAAABN7MIUSKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBVGE3DMMJYG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[burgosgts]

Good afternoon, first of all, thank you for the great work. I have the same problem, the motor only turns CW. Regardless of the mode I put it in, it recognizes the three modes but only turns clockwise.

[markbyrne]

This issue had resolved, but I just got back from a trip and the issue has re-emerged.

{"status":"Winding","rotationsPerDay":"800","direction":"CW","hour":"12","minutes":"00","durationInSecondsToCompleteOneRevolution":8,"startTimeEpoch":1738449903,"currentTimeEpoch":1738449933,"estimatedRoutineFinishEpoch":1738462603,"winderEnabled":"1","timerEnabled":"1","db":-69,"screenSleep":false,"screenEquipped":false}

It appears CW should be set, but it is spinning CCW.

[mwood77]

Hi all do you know what version you've installed?

The front end and the back end are both versioned;

Backend

• If you have an OLED screen attached, it'll flash the version on boot. If not, you can open up the source code and see what it is at this line:
  https://github.com/mwood77/winderoo/blob/main/src/platformio/osww-server/src/main.cpp#L97

Frontend

• Tap "Reset" and at the bottom of the pop-up, the version is listed there.

[markbyrne]

Looks like 1.0.0

[mwood77]

Could you please pull the code again (download the code in the main branch) and re-flash your microcontroller?