Important
This project is an add-on to your already built Open Source Watch Winder (OSWW).
- This microcontroller replaces the Pi Pico used in the OSWW.
- The Raspberry Pi Pico is incompatible with this project and must be swapped out.
- $8.00 (April 2023)
Note
The following tables contains affiliate links to Aliexpress; you do not pay an inflated price because of this. Should you decide to use another supplier, please ensure that you cross-reference this table and buy identical components.
While most of these components are standardized, I will not be able to assist you if you purchase your components from a separate supplier, as the winder was designed around the components (as supplied) beneath.
| Quantity per Order | Link / Part Name | Comments | Cost Incl. Shipping | |
|---|---|---|---|---|
| 🔲 | 1 | ESP32 Dev Kit | Select Color: ESP32 |
$8.00 |
The following parts list will allow you to add:
- 1x SSD1306 compatible OLED screen (0.96" size)
- 1x MX1508 Motor Controller. This is a much smaller DC motor controller. Winderoo supports granular motor control with this board (PWM control); you must set a build flag to use this, which has a callout step during the software installation instructions.
| Quantity per Order | Link / Part Name | Comments | Cost Incl. Shipping | |
|---|---|---|---|---|
| 🔲 | 1 | 0.96" SSD1306 OLED | Select: whichever colour you'd like! | $2.00 |
| 🔲 | 1 | MX1508 Miniature Motor Controller (PWM) | $3.00 |