Availability of Pre Made PC boards and Case? #24
Replies: 21 comments 21 replies
-
|
Hi. Sorry but no, I don't have premade boards. If you want to order some I recommend you JLCPCB, they are very cheap and for now I had no issues with them. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Is a BOM available? Esp for the connectors used and where to get them? |
Beta Was this translation helpful? Give feedback.
-
|
I too was hoping for a way to purchase a PCB rather than having to deal with MOQ and offshore shipping times. Anyone know if there's a service that does this for small things? I'm guessing it's too small (and/or too unassembled) for massdrop and crowdsupply. |
Beta Was this translation helpful? Give feedback.
-
|
JLCPCB offers really cheap PCBs and even has an assembly service, I always use it. You can order from 5 to as many as you want, and 5 PCB's cost 2$. The service is very cheap but the shipping is around 25-30€ (unless you use cainiao but I would warn you that it takes ages to get things and is not the most reliable service...) |
Beta Was this translation helpful? Give feedback.
-
|
I have several boards (3 of them) extra….
So if you want I would sell you one…10 dollars + shipping.
Regards,
Ted Killmeyer
…___________________________
Theodore Paul Killmeyer Jr.
(USS Nevada SSBN 733 Plank Owner)
Computer Engineer
Electrical Engineer
Senior Systems Architect
Skype: Theodore.Killmeyer
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Mobile: +1 (720) 937-0281
From: Mark ***@***.***>
Sent: Sunday, September 10, 2023 7:27 PM
To: gusmanb/logicanalyzer ***@***.***>
Cc: tkiller99999 ***@***.***>; Author ***@***.***>
Subject: Re: [gusmanb/logicanalyzer] Availability of Pre Made PC boards and Case? (Discussion #24)
I too was hoping for a way to purchase a PCB rather than having to deal with MOQ and offshore shipping times. Anyone know if there's a service that does this for small things? I'm guessing it's too small (and/or too unassembled) for massdrop and crowdsupply.
—
Reply to this email directly, view it on GitHub <#24 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATCQLNRW3KQ6RAZSADBLIPTXZZZHDANCNFSM6AAAAAAROHWDAQ> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ATCQLNSR755FXAO6FGJPGEDXZZZHDA5CNFSM6AAAAAAROHWDASWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQANI7PK.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Hi Ted, Do you still have those extra boards, out of luck? Thanks! Mathieu |
Beta Was this translation helpful? Give feedback.
-
|
Hi Ted, I am interested in some PCBs too... is still available? Best regards, Jwildesbr |
Beta Was this translation helpful? Give feedback.
-
|
sorry No the boards are no longer available... I am trying to get the Version 2 boards... |
Beta Was this translation helpful? Give feedback.
-
|
pcbway I think has a site where projects can be published and people can order hardware easily (if I understand correctly thing behind https://www.pcbway.com/project/shareproject/). Probably jlpcb has something similar. Maybe logicanalyzer could be provided as such project, so just click and go with ordering hardware? |
Beta Was this translation helpful? Give feedback.
-
|
This design looks great and I would really like a better analyser. the 100MHz version seems ideal for me. |
Beta Was this translation helpful? Give feedback.
-
|
If you are not in a hurry I would recommend you to wait a bit, I'm testing a new design ;) Else you have to export the Gerber files from KiCad, I don't include the gerber files because each manufacturer can have different requirements for the files and is better to ensure you export according to their parameters. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Hi interested on purchase a pair fully assembled. Tryed contact you by linkedin bcause dont't know if you're still operative here. Both same area. |
Beta Was this translation helpful? Give feedback.
-
|
Many thanks for your reply - much appreciated.
I'll try the Kicad route but I don't really get on with it very well - I'm
a bit old school.
Good luck with the new design - if you get round/solve the Pi problem it
should be brilliant.
Phil
…On Sat, Sep 14, 2024 at 8:40 PM Agustín Gimenez Bernad < ***@***.***> wrote:
If you are not in a hurry I would recommend you to wait a bit, I'm testing
a new design ;)
I will receive the first ones assembled in a couple of weeks and if
everything works ok I will show it here.
Else you have to export the Gerber files from KiCad, I don't include the
gerber files because each manufacturer can have different requirements for
the files and is better to ensure you export according to their parameters.
Cheers.
—
Reply to this email directly, view it on GitHub
<#24 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIMCNF6JKD2YW24Y6NNCBSDZWSGL5AVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANRUHA3DAMA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Following on:-
I have installed and used Kicad 8.0 to extract Gerber files.
The format seems suitable for my manufacturer as displayed by Viewmate.
I may have to change the layer names but I have to do that anyway with my
current software.
The boards seem to be v4.0 - is that currently correct and used with v5
software/firmware?
I'll wait a bit to see what transpires in the next few weeks but as I said
100MHz would be easily sufficient for my purposes.
Thanks
Phil
…On Sun, Sep 15, 2024 at 12:24 AM Philip Walker ***@***.***> wrote:
Many thanks for your reply - much appreciated.
I'll try the Kicad route but I don't really get on with it very well - I'm
a bit old school.
Good luck with the new design - if you get round/solve the Pi problem it
should be brilliant.
Phil
On Sat, Sep 14, 2024 at 8:40 PM Agustín Gimenez Bernad <
***@***.***> wrote:
> If you are not in a hurry I would recommend you to wait a bit, I'm
> testing a new design ;)
> I will receive the first ones assembled in a couple of weeks and if
> everything works ok I will show it here.
>
> Else you have to export the Gerber files from KiCad, I don't include the
> gerber files because each manufacturer can have different requirements for
> the files and is better to ensure you export according to their parameters.
>
> Cheers.
>
> —
> Reply to this email directly, view it on GitHub
> <#24 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AIMCNF6JKD2YW24Y6NNCBSDZWSGL5AVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANRUHA3DAMA>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes, that's correct, has been a while since the last change in the hardware, all that has changed is the firmware/software. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
If anyone is intereseted there is a new design that I'm testing and I will have some spares, they are fully assembled except for the pico itself. Check main page for a picture of the new design. |
Beta Was this translation helpful? Give feedback.
-
|
Gusmanb, Any update? is there a Tindie for the Version 2 Boards? I can do the SMC components, so I would just need a board and location for the components |
Beta Was this translation helpful? Give feedback.
-
|
I'm out in a business trip, will be back next week and will order a new batch. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
I to would be interested in ordering a preassembled board. |
Beta Was this translation helpful? Give feedback.
-
|
I would be interested in a preassembled board when V6 is available. Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
@kiwisincebirth @sonicthewedge send me an email to [email protected] and I will add you to the list. |
Beta Was this translation helpful? Give feedback.
-
|
I am definitely interested in purchasing a board. |
Beta Was this translation helpful? Give feedback.
-
|
This weekend will see how I can organize it, I will update this post with more info 😄 Cheers |
Beta Was this translation helpful? Give feedback.
-
|
Wow, I just found out about this project and I'm also very interested in a kit. |
Beta Was this translation helpful? Give feedback.
-
|
Same here, I'm a student and having a 200MHz cheap logic analyzer like this would be really handy, thank you |
Beta Was this translation helpful? Give feedback.
-
|
That's great news! Count me in for a ready-made board, please! Thanks a lot! |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for the delay, I'm really busy right now with my job, will try to sort things this weekend. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Well I am trying to get the Version 2 BOM and Board files so I can make several for myself… So at this time, sorry I have none to sell but the one I made in the begining
Regards,
Ted Killmeyer
…___________________________
Theodore Paul Killmeyer Jr.
(USS Nevada SSBN 733 Plank Owner)
Computer Engineer
Electrical Engineer
Senior Systems Architect
From: p3t3rm0v ***@***.***>
Sent: Friday, October 4, 2024 10:54 AM
To: gusmanb/logicanalyzer ***@***.***>
Cc: tkiller99999 ***@***.***>; Author ***@***.***>
Subject: Re: [gusmanb/logicanalyzer] Availability of Pre Made PC boards and Case? (Discussion #24)
Hi interested on purchase a pair fully assembled. Tryed contact you by linkedin bcause dont't know if you're still operative here. Both same area.
—
Reply to this email directly, view it on GitHub <#24 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATCQLNTYQLP4QEDGFDFNONTZZ3I25AVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBUG4ZTEMY> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ATCQLNUWTDZGAV4UYK4STYLZZ3I25A5CNFSM6AAAAABJCCV4IOWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAUWCFW.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Ok, I got things sorted. I have 6 spare units, they come with all assembled except for the pico, you can add a pico or a pico 2, the design works with both. Each unit will be 25€ plus shipping, payment through paypal, I will send the units on next friday after receiving payment. To do the order contact me through [email protected] and we will arrange it. I will send you the latest firmware and a link to the latest software version for your OS, so remember to state in the order:
Once I receive the order will check the delivery costs to your address and will send you the total ammount to be paid (if you have a cheaper delivery option than the one I find I gladly will give you my address so you can arrange the package pickup). And if this goes well I might open a store in tindie as I have some other projects that I will publish soon and can be good to have them available 😄 Cheers! |
Beta Was this translation helpful? Give feedback.
-
|
Ok I will contact you… I might also want to just get the Version 2 PC board…. We will see when you get your Tindie shop up…
Regards,
Ted Killmeyer
…___________________________
Theodore Paul Killmeyer Jr.
(USS Nevada SSBN 733 Plank Owner)
Computer Engineer
Electrical Engineer
Senior Systems Architect
Skype: Theodore.Killmeyer
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Mobile: +1 (720) 937-0281
From: Agustín Gimenez Bernad ***@***.***>
Sent: Sunday, October 6, 2024 3:19 AM
To: gusmanb/logicanalyzer ***@***.***>
Cc: tkiller99999 ***@***.***>; Author ***@***.***>
Subject: Re: [gusmanb/logicanalyzer] Availability of Pre Made PC boards and Case? (Discussion #24)
@ORARadwan <https://github.com/ORARadwan>
If you check the last message is already arranged and all the spare ones have been reserved, but after these are sent if all goes ok I will start a tindie shop and will deliver these regularly.
Contact me through ***@***.*** ***@***.***> and I will notify you when there are more available.
Cheers.
—
Reply to this email directly, view it on GitHub <#24 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATCQLNSIO3J7HRVQB4LCRCTZ2EFBPAVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBVG42TMNI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ATCQLNSJQGCFYV63KDKSDJTZ2EFBPA5CNFSM6AAAAABJCCV4IOWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAUWWF2.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
I would also like to have one o the pre assembled new boards. |
Beta Was this translation helpful? Give feedback.
-
|
All have been sent but next week I will order more, contact me at [email protected] and I will send you an email when they are available. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Cheers and thanks.
Regards,
Ted Killmeyer
…___________________________
Theodore Paul Killmeyer Jr.
(USS Nevada SSBN 733 Plank Owner)
Computer Engineer
Electrical Engineer
Senior Systems Architect
Skype: Theodore.Killmeyer
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Mobile: +1 (720) 937-0281
From: Agustín Gimenez Bernad ***@***.***>
Sent: Tuesday, November 12, 2024 8:27 AM
To: gusmanb/logicanalyzer ***@***.***>
Cc: tkiller99999 ***@***.***>; Author ***@***.***>
Subject: Re: [gusmanb/logicanalyzer] Availability of Pre Made PC boards and Case? (Discussion #24)
I'm out in a business trip, will be back next week and will order a new batch.
Cheers.
—
Reply to this email directly, view it on GitHub <#24 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATCQLNXTIHC3NOSUBR34L5L2AIT6XAVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMRSHA4TENA> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ATCQLNQJR5EJJQWN6UECW4T2AIT6XA5CNFSM6AAAAABJCCV4IOWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAVNLPY.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Hi Ted, it’s great that you want to support the creator directly! Many project creators do offer pre-manufactured PCBs and cases for convenience. It’s worth checking the official documentation or project page for any store links or recommended sources. |
Beta Was this translation helpful? Give feedback.
-
|
Prefabricated PCBs and cases save time and effort, so it’s completely understandable to prefer that route. If the creator doesn’t sell them directly, sometimes they partner with suppliers or provide verified third-party options. |
Beta Was this translation helpful? Give feedback.
-
|
If you haven’t found pre-made options, you could consider reaching out to the creator directly. They might offer boards/cases informally or appreciate the feedback for future offerings. Good luck, and I hope you find the perfect solution! |
Beta Was this translation helpful? Give feedback.
-
|
Me gustaría tener una placa premontada, vivo en España ¿podrias decirme precio incluido envio ? |
Beta Was this translation helpful? Give feedback.
-
OK.. So call me Lazy.... But
Do you have premanufactured PC boards? and the Printed Case available?
I know I can send off the design files to PCBWay or another PC factory... but I would rather the creator gets the Money.
Ted Killmeyer
Beta Was this translation helpful? Give feedback.
All reactions