Skip to content

Latest commit

 

History

History
 
 

AMQP

README.md

AMQP sample pack

Shows how to use AMQP.Net Lite library.

Note: This sample is part of a large collection of nanoFramework feature samples. If you are unfamiliar with Git and GitHub, you can download the entire collection as a ZIP file, but be sure to unzip everything to access any shared dependencies.

Hardware requirements

An hardware device with networking capabilities running a nanoFramework image. This code has been tested with a SMT32F769IDISCOVERY board.

TLS connection to Azure IoT Hub

To use a secured (TLS) connection to Azure IoT Hub the following is required:

  1. Upload the root CA certificate for Azure. That's the "Baltimore CyberTrust Root". You can download it from here. It should be uploaded to the device using the Network Configuration dialog from Device Explorer.

  2. Set the Connection.DisableServerCertValidation to false.

  3. Generate an SAS Token for your device. Azure IoT Explorer it's a convenient tool to do this for you. After setting up the access to you IoT Hub, navigate to the device, enter the desired parameters and generate the SAS Token (see the print screen below).

Reference

Build the sample

  1. If you download the samples ZIP, be sure to unzip the entire archive, not just the folder with the sample you want to build.
  2. Start Microsoft Visual Studio 2019 (VS 2017 should be OK too) and select File > Open > Project/Solution.
  3. Starting in the folder where you unzipped the samples, go to the subfolder for this specific sample. Double-click the Visual Studio Solution (.sln) file.
  4. Press Ctrl+Shift+B, or select Build > Build Solution.

Run the sample

The next steps depend on whether you just want to deploy the sample or you want to both deploy and run it.

Deploying the sample

  • Select Build > Deploy Solution.

Deploying and running the sample

  • To debug the sample and then run it, press F5 or select Debug > Start Debugging.