From dbdb71bdab85ba03bc4b1475f5901921b3f48ec9 Mon Sep 17 00:00:00 2001
From: Aegean Odyssey <57586704+aegean-odyssey@users.noreply.github.com>
Date: Fri, 27 Aug 2021 20:02:05 +0000
Subject: [PATCH] update the micro SD card's README (issues #79 and #83)

---
 uSDCard/README.md | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/uSDCard/README.md b/uSDCard/README.md
index df5ff772..be042839 100644
--- a/uSDCard/README.md
+++ b/uSDCard/README.md
@@ -2,6 +2,13 @@ _mpmd_marlin_1.1.x_
 
 ## MPMD_MARLIN_1.1.X
 
+> ###### IMPORTANT CAVEAT! The `mpmd_marlin_1.1.x` firmware is __NOT__
+> ###### designed for the __V2__ model of the Monoprice Mini Delta
+> ###### 3D printer. Monoprice recently began selling a __V2__ model of
+> ###### the printer, and I doubt that this firmware is compatible.
+> ###### ___Please, do NOT try to install this firmware on the Monoprice
+> ###### Mini Delta V2 printer.___
+
 __an open-source upgrade for the Monoprice MP Mini Delta 3d printer__
 
 The [mpmd_marlin_1.1.x](https:/github.com/aegean-odyssey/mpmd_marlin_1.1.x)
@@ -11,6 +18,12 @@ zip archive to enhance your Monoprice MP Mini Delta 3d printer.
 
 ## GETTING STARTED
 
+Note: you'll need a micro SD card to install the firmware. The printer can
+be finicky about the card (more about this at the project's wiki), but the
+micro SD card that Monoprice supplies with the printer usually works. _It's
+a good idea to hang on to this card the comes with the printer, if only to
+be able to update the firmware if necessary._
+
 Copy the contents of this folder to the ROOT directory of the micro SD card,
 i.e. this README.md file should be in the card's ROOT directory. With the
 micro SD card, you can install the firmware, perform an initial printer