common.sh

#!bin/bash

#
# preupgrade-assistant module API -- Bash port
#
# These variables and functions will be available
# for Bash preupgrade-assistant modules.
#


CACHE=/var/cache/preupgrade

#
# Directory with logs gathered by preupgrade-assistant
#
PREUPGRADE_CACHE=/var/cache/preupgrade/common

#
# Preupgrade-assistant configuration file
#
PREUPGRADE_CONFIG=/etc/preupgrade-assistant.conf

#
# Full path log file with to all installed packages
#
VALUE_RPM_QA=$PREUPGRADE_CACHE/rpm_qa.log

#
# Full path log file with to all changed files
#
VALUE_ALL_CHANGED=$PREUPGRADE_CACHE/rpm_Va.log

#
# Full path to log file with all /etc changed configuration files
#
VALUE_CONFIGCHANGED=$PREUPGRADE_CACHE/rpm_etc_Va.log

#
# Full path to log file with all users gathered by getent
#
VALUE_PASSWD=$PREUPGRADE_CACHE/passwd.log

#
# Full path to log file with all services enabled/disabled on system.
#
VALUE_CHKCONFIG=$PREUPGRADE_CACHE/chkconfig.log

#
# Full path to log file with all groups gathered by getent
#
VALUE_GROUP=$PREUPGRADE_CACHE/group.log

#
# Full path to log file with all installed files
#
VALUE_RPMTRACKEDFILES=$PREUPGRADE_CACHE/rpmtrackedfiles.log

#
# Full path to log file with all Red Hat signed packages
#
VALUE_RPM_RHSIGNED=$PREUPGRADE_CACHE/rpm_rhsigned.log

#
# Full path to log file with all local files
#
VALUE_ALLMYFILES=$PREUPGRADE_CACHE/allmyfiles.log

#
# Full path to log file with all executable files
#
VALUE_EXECUTABLES=$PREUPGRADE_CACHE/executable.log

#
# Variable which referes to temporary directory directory provided by module
#
VALUE_TMP_PREUPGRADE=$XCCDF_VALUE_TMP_PREUPGRADE

#
# postupgrade directory used by in-place upgrades.
#
# Scripts mentioned there are executed automatically by redhat-upgrade-tool
#
POSTUPGRADE_DIR=$VALUE_TMP_PREUPGRADE/postupgrade.d

CURRENT_DIRECTORY=$XCCDF_VALUE_CURRENT_DIRECTORY

#
# MIGRATE means if preupg binary was used with `--mode migrate` parameter
# UPGRADE means if preupg binary was used with `--mode upgrade` parameter
# These modes are used if `--mode` is not used
#
MIGRATE=$XCCDF_VALUE_MIGRATE
UPGRADE=$XCCDF_VALUE_UPGRADE

#
# Variable which referes to solution file provided by module
#
SOLUTION_FILE=$CURRENT_DIRECTORY/$XCCDF_VALUE_SOLUTION_FILE

#
# Directory which is used for kickstart generation
#
KICKSTART_DIR=$VALUE_TMP_PREUPGRADE/kickstart

#
# README file which contains description about all files in kickstart directory
#
KICKSTART_README=$KICKSTART_DIR/README

#
# Directory with scripts which can be executed after installation by administrator
#
KICKSTART_SCRIPTS=$KICKSTART_DIR/scripts

#
# The same as $KICKSTART_SCRIPTS
#
KICKSTART_POSTUPGRADE=$KICKSTART_SCRIPTS

#
# Variable which refers to static data used by preupgrade-assistant and modules
#
COMMON_DIR=$XCCDF_VALUE_REPORT_DIR/common

#
# Override mode for is_dist_native() and similar
#
# Affects which packages are considered native:
#
# If set to 'sign' (default), GPG signature is consulted.  If 'all',
# all packages are native.  If set to path to a file, packages listed
# there are native.
#
DIST_NATIVE=$XCCDF_VALUE_DIST_NATIVE

#
# Variable which indicates DEVEL mode.
#
DEVEL_MODE=$XCCDF_VALUE_DEVEL_MODE

#
# Variable which contains file with packages add to the kickstart anyway
#
SPECIAL_PKG_LIST=$KICKSTART_DIR/special_pkg_list

#
# Postupgrade directory which is not executed automatically after an upgrade or migration
#
NOAUTO_POSTUPGRADE_D=$VALUE_TMP_PREUPGRADE/noauto_postupgrade.d

#
# Exit status for 'pass' result
#
RESULT_PASS=$XCCDF_RESULT_PASS

#
# Exit status for 'fail' result
#
RESULT_FAIL=$XCCDF_RESULT_FAIL

#
# Exit status for 'error' result
#
RESULT_ERROR=$XCCDF_RESULT_ERROR

#
# Exit status for 'notapplicable' result
#
RESULT_NOT_APPLICABLE=$XCCDF_RESULT_NOT_APPLICABLE

#
# Exit status for 'fixed' result
#
RESULT_FIXED=$XCCDF_RESULT_FIXED

#
# Exit status for 'informational' result
#
RESULT_INFORMATIONAL=$XCCDF_RESULT_INFORMATIONAL

#
# Name of module being currently executed
#

if [ -z MODULE_PATH -o x"$MODULE_PATH" == "x" ]; then
    MODULE_PATH=${CURRENT_DIRECTORY#$XCCDF_VALUE_REPORT_DIR/}
    MODULE_PATH=${MODULE_PATH////_}
else
    MODULE_PATH=$XCCDF_VALUE_MODULE_PATH
fi


#
# variables set by PA config file #
#
HOME_DIRECTORY_FILE=""
USER_CONFIG_FILE=0

#
# Version of this API
#
PREUPG_API_VERSION=1

export LC_ALL=C

_log() {
    #
    # general logging function
    #
    # _log SEVERITY MESSAGE
    #
    # @SEVERITY: set it to one of INFO|ERROR|WARNING
    # @MESSAGE: message to be logged
    #
    local SEVERITY=$1 ; shift

    echo "preupg.log.$SEVERITY: $1" >&2
}

log_debug() {
    #
    # log_debug(message) -> None
    #
    # log message to stdout with severity debug
    #
    # verbose information, may help with script debugging
    #
    _log "DEBUG" "$1"
}

log_info() {
    #
    # log_info(message) -> None
    #
    # log message to stdout with severity info
    #
    # informational message
    #
    _log "INFO" "$1"
}

log_error() {
    #
    # log_error(message) -> None
    #
    # log message to stdout with severity error
    #
    # use this severity if your script found something severe
    # which may cause malfunction on new system
    #
    _log "ERROR" "$1"
}

log_warning() {
    #
    # log_warning(message) -> None
    #
    # log message to stdout with severity warning
    #
    # important finding, administrator of system should be aware of this
    #
    _log "WARNING" "$1"
}

_log_risk() {
    #
    # log risk level to stderr
    #
    echo "preupg.risk.$1: $2" >&2
}

log_slight_risk() {
    #
    # no issues found; although there are some unexplored areas
    #
    _log_risk "SLIGHT" "$1"
}

log_medium_risk() {
    #
    # inplace upgrade is possible; system after upgrade may be unstable
    #
    _log_risk "MEDIUM" "$1"
}

log_high_risk() {
    #
    # Administrator has to inspect and correct upgraded system so inplace upgrade can be used.
    #
    _log_risk "HIGH" "$1"
}

log_extreme_risk() {
    #
    # Inplace upgrade is impossible.
    #
    _log_risk "EXTREME" "$1"
}

exit_pass() {
    #
    # Test passed.
    #
    exit $RESULT_PASS
}

exit_fail() {
    #
    # The test failed.
    #
    # Moving to new release with this configuration will result in malfunction.
    #
    exit $RESULT_FAIL
}

exit_error() {
    #
    # An error occurred and test could not complete.
    #
    # (script failed while doing its job)
    #
    exit $RESULT_ERROR
}

exit_not_applicable() {
    #
    # Rule did not apply to test target. (e.g. package is not installed)
    #
    exit $RESULT_NOT_APPLICABLE
}

exit_informational() {
    #
    # Rule has only informational output.
    #
    exit $RESULT_INFORMATIONAL
}

exit_fixed() {
    #
    # Rule failed, but was later fixed.
    #
    exit $RESULT_FIXED
}

switch_to_content() {
    #
    # Function for switch to the content directory
    #
    cd "$CURRENT_DIRECTORY"
}

check_applies_to() {
    #
    # Function checks is package is installed and signed by Red Hat
    #
    #  Parameter list of packages which will be checked. Module requires them.
    # :return: 0 - package is installed and signed by Red Hat
    #          exit_not_applicable - module will not be executed
    #
    local RPM=1
    local RPM_NAME="$1"
    local pkg
    [ -z "$1" ] && RPM=0

    local NOT_APPLICABLE=0
    if [ $RPM -eq 1 ]; then
        RPM_NAME=$(echo "$RPM_NAME" | tr "," " ")
        for pkg in $RPM_NAME
        do
            is_pkg_installed "$pkg" && is_dist_native "$pkg" || {
                log_info "Package $pkg is not installed or it is not signed by Red Hat."
                NOT_APPLICABLE=1
            }
        done
    fi
    if [ $NOT_APPLICABLE -eq 1 ]; then
        exit_not_applicable
    fi
}

is_pkg_installed() {
    #
    # Function checks if package is installed.
    #
    # Parameter is a package name which will be checked.
    # Return: 0 - package is installed
    #         1 - package is NOT installed
    grep -q "^$1[[:space:]]" $VALUE_RPM_QA || return 1
    return 0
}

check_rpm_to() {
    #
    # Function checks if relevant package is installed and if relevant binary exists on the system.
    #
    # Function is needed from module point of view.
    # :param $1: list of RPMs separated by comma
    # :param $2: list of binaries separated by comma
    # :return:
    #
    local RPM=1
    local BINARY=1
    local RPM_NAME=$1
    local BINARY_NAME=$2
    local NOT_APPLICABLE=0
    local bin

    [ -z "$1" ] && RPM=0
    [ -z "$2" ] && BINARY=0


    if [ $RPM -eq 1 ]; then
        RPM_NAME=$(echo "$RPM_NAME" | tr "," " ")
        for pkg in $RPM_NAME
        do
            grep "^$pkg[[:space:]]" $VALUE_RPM_QA > /dev/null
            if [ $? -ne 0 ]; then
                log_high_risk "Package $pkg is not installed."
                NOT_APPLICABLE=1
            fi
        done
    fi

    if [ $BINARY -eq 1 ]; then
        BINARY_NAME=$(echo "$BINARY_NAME" | tr "," " ")
        for bin in $BINARY_NAME
        do
            which "$bin" > /dev/null 2>&1
            if [ $? -ne 0 ]; then
                log_high_risk "Binary $bin is not installed."
                NOT_APPLICABLE=1
            fi
        done
    fi


    if [ $NOT_APPLICABLE -eq 1 ]; then
        log_high_risk "Please, install all required packages (and binaries) and run preupg again to process check properly."
        exit_fail
    fi
}


solution_file() {
    #
    # Function appends a message to solution file.
    #
    # solution file will be created in module directory
    # :param message: Message - string of list of strings
    #
    echo "$1" >> "$SOLUTION_FILE"
}


service_is_enabled() {
    #
    # returns true if service in $1 is enabled in any runlevel
    #
    if [ $# -ne 1 ] ; then
        echo "Usage: service_is_enabled servicename"
        return 2
    fi
    grep -qe "^${1}.*:on" "$VALUE_CHKCONFIG" && return 0
    return 1
}

backup_config_file() {
    #
    # backup the config file
    #
    # true if cp succeeds,
    # 1 if config file doesn't exist
    # 2 if config file was not changed and thus is not necessary to back-up
    #
    local CONFIG_FILE=$1

    # config file exists?
    if [ ! -f "$CONFIG_FILE" ] ; then
        return 1
    fi

    # config file is changed?
    grep -qe " ${CONFIG_FILE}" ${VALUE_CONFIGCHANGED} || return 2

    mkdir -p "${VALUE_TMP_PREUPGRADE}/$(dirname "$CONFIG_FILE")"
    cp -f "${CONFIG_FILE}" "${VALUE_TMP_PREUPGRADE}${CONFIG_FILE}"
    return $?
}

space_trim() {
    #
    # Function trim spaces.
    #
    # parameter is string to trim
    #
    echo "$@" | sed -r "s/^\s*(.*)\s*$/\1/"
}

conf_get_sections() {
    #
    # functions for easy parsing of config files
    #
    # returns 0 on success, otherwise 1
    # requires path
    #
    [ $# -eq 1 ] || return 1
    [ -f "$1" ] || return 1

    grep -E "^\[.+\]$" "$1" | sed -r "s/^\[(.+)\]$/\1/"
    return $?
}

conf_get_section() {
    #
    # get all items from config file $1 inside section $2
    #
    # e.g.: conf_get_section CONFIG_FILE section-without-brackets
    #
    [ $# -eq 2 ] || return 1
    [ -f "$1" ] || return 1
    local _section=""
    local line

    while read line; do
        [ -z "$line" ] && continue
        echo "$line" | grep -q "^\[..*\]$" && {
            _section="$(echo "$line" | sed -r "s/^\[(.+)\]$/\1/")"
            continue # that's new section
        }
        [ -z "$_section" ] && continue

        #TODO: do not print comment lines?
        [ "$_section" == "$2" ] && echo "$line" |grep -vq "^#.*$" && echo "$line"
    done < "$1"

    return 0
}

is_dist_native() {
    #
    # return 1 if package is not installed and print warning log.
    #
    # is_dist_native function return only 0 or 1
    # return 1 if package is not installed and print warning log.
    # Case DEVEL_MODE is turn off then return 0 if package is signed or 1 if not.
    # Case DEVEL_MODE is turn on:
    #   DIST_NATIVE = sign: return 0 if is RH_SIGNED else return 1
    #   DIST_NATIVE = all: always return 0
    #   DIST_NATIVE = path_to_file: return 0 if package is in file else return 1
    #
    if [ $# -ne 1 ]; then
        return 1
    fi
    local pkg=$1

    grep "^$pkg[[:space:]]" $VALUE_RPM_QA > /dev/null
    if [ $? -ne 0 ]; then
        log_warning "Package $pkg is not installed on Red Hat Enterprise Linux system."
        return 1
    fi
    if [ x"$DEVEL_MODE" == "x0" ]; then
        grep "^$pkg[[:space:]]" $VALUE_RPM_RHSIGNED > /dev/null
        if [ $? -eq 0 ]; then
            return 0
        else
            return 1
        fi
    else
        case "$DIST_NATIVE" in
            "all")
                return 0
                ;;
            "sign")
                grep "^$pkg[[:space:]]" $VALUE_RPM_RHSIGNED > /dev/null
                if [ $? -eq 0 ]; then
                    return 0
                else
                    return 1
                fi
                ;;
            *)
                if [ -f "$DIST_NATIVE" ]; then
                    grep "^$pkg" "$DIST_NATIVE" > /dev/null
                    if [ $? -eq 0 ]; then
                        return 0
                    fi
                fi
                return 1
                ;;
        esac
    fi
}

get_dist_native_list() {
    #
    # return list of all dist native packages according to is_dist_native()
    #
    local pkg
    local line
    while read line; do
        pkg=$(echo "$line" | grep -Eom1 '^[^[:space:]]+')
        is_dist_native "$pkg" >/dev/null && echo "$pkg"
    done < "$VALUE_RPM_QA"
}


# here is parsed PA configuration

load_pa_configuration() {
    #
    # this is main function for parsing
    #

    [ -f "$PREUPGRADE_CONFIG" ] && [ -r "$PREUPGRADE_CONFIG" ] || {
    log_error "Configuration file $PREUPGRADE_CONFIG is missing or is not readable!"
        exit_error
    }
    local _pa_conf="$(conf_get_section "$PREUPGRADE_CONFIG" "preupgrade-assistant")"
    local tmp_option
    local tmp_val
    local line

    [ -z "$_pa_conf" ] && {
        log_error "Can't load any configuration from section preupgrade-assistant!"
        exit_error
    }

    for line in $_pa_conf; do
        tmp_option=$(space_trim "$(echo "$line" | cut -d "=" -f 1)")
        tmp_val=$(space_trim "$(echo "$line" | cut -d "=" -f 2-)")
        # HERE add your actions
        case $tmp_option in
            home_directory_file)
                HOME_DIRECTORY_FILE="$tmp_val"
                ;;
            user_config_file)
                USER_CONFIG_FILE=$([ "$tmp_val" == "enabled" ] && echo 1 || echo 0)
                ;;
            dist_native)
                local temp="$tmp_val"
                ;;
            *) log_error "Unknown option $tmp_option"; exit_error
        esac
    done
}

print_home_dirs() {
    #
    # print items from [home-dirs] which are relevant for given user
    #
    # when username is not given or config file for user is not enabled,
    # items from main configuration file is printed
    # returns 0 on SUCCESS, otherwise 1 and logs warning
    # shouldn't be used before load_config_parser
    #
    [ $# -eq 1 ] && [ "$USER_CONFIG_FILE" -eq 1 ] || {
        conf_get_section "$PREUPGRADE_CONFIG" "home-dirs"
        return 0
    }

    local _uconf_file="/home/$1/$HOME_DIRECTORY_FILE"
    [ -f "$_uconf_file" ] || return 0 # missing file in user's home dir is OK
    conf_get_section "$_uconf_file" "home-dirs"
}

add_pkg_to_kickstart() {
    #
    # Function adds a package to special_pkg_list
    #
    [ $# -eq 0  ] && {
        log_debug "Missing parameters! Any package will be added." >&2
        return 1
    }

    while [ $# -ne 0 ]; do
        echo "$1" >> "$SPECIAL_PKG_LIST"
        shift
    done
    return 0
}

deploy_hook() {
    #
    # Function which deploys script to specific location.
    #
    # Arguments:
    # param 1: hook, like postupgrade, preupgrade, etc.
    # param 2: script name
    #

    local deploy_name=$1
    [ -z "$deploy_name" ] && {
        log_error "Hook name is not specified. (Possible values are postupgrade, preupgrade.)"
        exit_error
    }
    shift
    local script_name=$1
    [ -z "$script_name" ] && {
        log_error "Script name is not specified. It is mandatory."
        exit_error
    }
    shift

    [ -z "$MODULE_PATH" ] && {
        log_error "Module path is not specfied."
        exit_error
    }

    case $deploy_name in
        "postupgrade"|"preupgrade")
            if [ ! -f "$script_name" ] ; then
                log_error "Script_name $script_name does not exist."
                exit_error
            fi
            hook_dir="$VALUE_TMP_PREUPGRADE/hooks/$MODULE_PATH/$deploy_name"
            if [ ! -d "$hook_dir" ]; then
                log_debug "Dir $hook_dir does not exist."
                mkdir -p "$hook_dir"
            else
                log_error "The $hook_dir directory already exists."; exit_error
            fi
            log_debug "Copy script $script_name as $hook_dir/run_hook."
            cp -- "$script_name" "$hook_dir/run_hook" 2>/dev/null || {
                log_error "Copying of hook scrip failed: $script_name"
                exit_error
            }
            [ -n "$1" ] || return 0
            cp -r -- "$@" "$hook_dir" 2>/dev/null || {
                log_error "Copying of following files with hook script failed: $*"
                exit_error
            }
            ;;
        *) log_error "Unknown option $deploy_name"; exit_error
            ;;
    esac
    return 0
}

load_pa_configuration
switch_to_content