opennurbs_defines.h

/*
// Copyright (c) 1993-2016 Robert McNeel & Associates. All rights reserved.
// OpenNURBS, Rhinoceros, and Rhino3D are registered trademarks of Robert
// McNeel & Associates.
//
// THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WARRANTY.
// ALL IMPLIED WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE AND OF
// MERCHANTABILITY ARE HEREBY DISCLAIMED.
//				
// For complete openNURBS copyright information see <http://www.opennurbs.org>.
//
////////////////////////////////////////////////////////////////
*/

////////////////////////////////////////////////////////////////
//
//   Includes all openNURBS toolkit defines and enums.
//
////////////////////////////////////////////////////////////////

#if !defined(OPENNURBS_DEFINES_INC_)
#define OPENNURBS_DEFINES_INC_

#if !defined(OPENNURBS_SYSTEM_INC_)
#error Include opennurbs_system.h before opennurbs_defines.h
#endif

#if defined (cplusplus) || defined(_cplusplus) || defined(__cplusplus) || defined(ON_CPLUSPLUS)
// C++ extern "C" declaration for C linkage

#if !defined(ON_CPLUSPLUS)
#define ON_CPLUSPLUS
#endif
#define ON_EXTERNC extern "C"
#define ON_BEGIN_EXTERNC extern "C" {
#define ON_END_EXTERNC   }

#define ON_UINT_FROM_ENUM(e) (static_cast<unsigned int>(e))
#define ON_INT_FROM_ENUM(e) ((int)static_cast<unsigned int>(e))

#else

/* C file - no extern declaration required or permitted */

#define ON_EXTERNC
#define ON_BEGIN_EXTERNC
#define ON_END_EXTERNC  

#endif


/*
// Declarations in header (.H) files look like
//
//   ON_DECL type function():
//   extern ON_EXTERN_DECL type global_variable;
//   class ON_CLASS classname {};
//   ON_TEMPLATE template class ON_CLASS template<T>;
//
*/

#define ON_ENUM_FROM_UNSIGNED_CASE(e) case (unsigned int)e: return(e); break
#define ON_ENUM_TO_STRING_CASE(e) case e: return( ON_String(#e) ); break
#define ON_ENUM_TO_WIDE_STRING_CASE(e) case e: return( ON_wString(#e) ); break
#define ON_ENUM_TO_STRING_CASE_SET(e,s) case e: (s)=ON_String(#e); break
#define ON_ENUM_TO_WIDE_STRING_CASE_SET(e,s) case e: (s)=ON_wString(#e); break

/* export/import */
#if defined(OPENNURBS_EXPORTS)
/* compiling opennurbs as some type of dynamic linking library */

#if defined(ON_COMPILER_MSC)
/* compiling OpenNurbs as a Windows DLL - export classes, functions, templates, and globals */
#define ON_CLASS __declspec(dllexport)
#define ON_DECL __declspec(dllexport)
#define ON_EXTERN_DECL __declspec(dllexport)
#define ON_DLL_TEMPLATE

#elif defined(ON_COMPILER_CLANG)
/* compiling opennurbs as an Apple shared library */
#define ON_CLASS __attribute__ ((visibility ("default")))
#define ON_DECL __attribute__ ((visibility ("default")))
#define ON_EXTERN_DECL __attribute__ ((visibility ("default")))

#else
#error fill in your compiler dynamic linking decorations
#endif

#elif defined(OPENNURBS_IMPORTS)
/* dynamically linking with opennurbs in some way */

#if defined(ON_COMPILER_MSC)
/* using OpenNurbs as a Windows DLL - import classes, functions, templates, and globals */
#define ON_CLASS __declspec(dllimport)
#define ON_DECL __declspec(dllimport)
#define ON_EXTERN_DECL __declspec(dllimport)
#define ON_DLL_TEMPLATE extern

#elif defined(ON_COMPILER_CLANG)
/* using opennurbs as an Apple shared library */
#define ON_CLASS __attribute__ ((visibility ("default")))
#define ON_DECL __attribute__ ((visibility ("default")))
#define ON_EXTERN_DECL __attribute__ ((visibility ("default")))

#else
#error fill in your compiler dynamic linking decorations
#endif

#else

/* compiling or using OpenNurbs as a static library */
#define ON_CLASS
#define ON_DECL
#define ON_EXTERN_DECL

#if defined(ON_DLL_TEMPLATE)
#undef ON_DLL_TEMPLATE
#endif

#endif


// ON_DEPRECATED is used to mark deprecated functions.
#if defined(ON_COMPILER_MSC)
#define ON_DEPRECATED  __declspec(deprecated)
#define ON_DEPRECATED_MSG(s) [[deprecated(s)]]
#elif defined(ON_COMPILER_CLANG)
#define ON_DEPRECATED  __attribute__((deprecated))
#define ON_DEPRECATED_MSG(s) [[deprecated(s)]]
#else
#define ON_DEPRECATED
#define ON_DEPRECATED_MSG(s)
#endif

#if defined(PI)
/* double precision ON_PI = 3.141592653589793238462643. ON_PI radians = 180 degrees */
#define ON_PI           PI
#else
/* double precision ON_PI = 3.141592653589793238462643. ON_PI radians = 180 degrees */
#define ON_PI 3.141592653589793238462643
#endif

/* double precision ON_2PI = 2.0*ON_PI. ON_2PI radians = 360 degrees. */
#define ON_2PI (2.0*ON_PI)

/* double precision ON_HALFPI = 0.5*ON_PI. ON_HALFPI radians = 90 degrees.  */
#define ON_HALFPI (0.5*ON_PI)

/* angle_in_degrees = ON_DEGREES_TO_RADIANS*angle_in_radians */
#define ON_DEGREES_TO_RADIANS (ON_PI/180.0)

/* angle_in_radians = ON_RADIANS_TO_DEGREES*angle_in_degrees */
#define ON_RADIANS_TO_DEGREES (180.0/ON_PI)

/*
Parameters:
  angle_in_radians - [in]
    Angle measure in radians
Returns:
  Angle measure in degrees
*/
ON_DECL
double ON_DegreesFromRadians(
  double angle_in_radians
);

/*
Parameters:
  angle_in_degrees - [in]
    Angle measure in degrees
Returns:
    Angle measure in radians
*/
ON_DECL
double ON_RadiansFromDegrees(
  double angle_in_degrees
);

#define ON_SQRT2          1.414213562373095048801689
#define ON_SQRT3          1.732050807568877293527446
#define ON_SQRT3_OVER_2   0.8660254037844386467637230
#define ON_1_OVER_SQRT2   0.7071067811865475244008445
#define ON_SIN_PI_OVER_12 0.2588190451025207623488990
#define ON_COS_PI_OVER_12 0.9659258262890682867497433

#define ON_LOG2         0.6931471805599453094172321
#define ON_LOG10        2.302585092994045684017991

#define ON_ArrayCount(a) (sizeof(a)/sizeof((a)[0]))

#if defined(DBL_MAX)
#define ON_DBL_MAX DBL_MAX
#else
#define ON_DBL_MAX 1.7976931348623158e+308
#endif

#if defined(DBL_MIN)
#define ON_DBL_MIN DBL_MIN
#else
#define ON_DBL_MIN 2.22507385850720200e-308
#endif

// ON_EPSILON = 2^-52
#if defined(DBL_EPSILON)
#define ON_EPSILON DBL_EPSILON
#else
#define ON_EPSILON 2.2204460492503131e-16
#endif
#define ON_SQRT_EPSILON 1.490116119385000000e-8

#if defined(FLT_EPSILON)
#define ON_FLOAT_EPSILON FLT_EPSILON
#else
#define ON_FLOAT_EPSILON 1.192092896e-07
#endif
#define ON_SQRT_FLOAT_EPSILON 3.452669830725202719e-4

/*
// In cases where lazy evaluation of a double value is
// performed, b-rep tolerances being a notable example,
// this value is used to indicate the value has not been
// computed.  This value must be < -1.0e308. and > -ON_DBL_MAX
//
// The reasons ON_UNSET_VALUE is a valid finite number are:
//
//   1) It needs to round trip through fprintf/sscanf.
//   2) It needs to persist unchanged through assigment
/       and not generate exceptions when assigned.
//   3) ON_UNSET_VALUE == ON_UNSET_VALUE needs to be true.
//   4) ON_UNSET_VALUE != ON_UNSET_VALUE needs to be false.
//
// Ideally, it would also have these SNaN attributes
//   * When used in a calculation, a floating point exception
//     occures.
//   * No possibility of a valid calculation would generate
//     ON_UNSET_VALUE.
//   * float f = (float)ON_UNSET_VALUE would create an invalid
//     float and generate an exception.
*/
#define ON_UNSET_POSITIVE_VALUE 1.23432101234321e+308
#define ON_UNSET_VALUE -ON_UNSET_POSITIVE_VALUE

/*
// ON_UNSET_FLOAT is used to indicate a texture coordinate
// value cannot be calculated or is not well defined.  
// In hindsight, this value should have been ON_FLT_QNAN
// because many calculation convert float texture coordinates
// to doubles and the "unset"ness attribute is lost.
*/
#define ON_UNSET_POSITIVE_FLOAT 1.234321e+38f
#define ON_UNSET_FLOAT -ON_UNSET_POSITIVE_FLOAT

// When unsinged int values are used in a context where 
// 0 is a valid index and there needs to be a value that 
// indicates the index is not set, use ON_UNSET_UINT_INDEX.
#define ON_UNSET_UINT_INDEX 0xFFFFFFFFU

// When signed int values are used in a context where 
// 0 and small negative values are valid indices and there needs
// to be a value that indicates the index is not set,
// use ON_UNSET_INT_INDEX.  This value is INT_MIN+1
#define ON_UNSET_INT_INDEX ((const int)-2147483647)

ON_BEGIN_EXTERNC

// IEEE 754 special values

extern ON_EXTERN_DECL const double ON_DBL_QNAN;
extern ON_EXTERN_DECL const double ON_DBL_PINF;
extern ON_EXTERN_DECL const double ON_DBL_NINF;

extern ON_EXTERN_DECL const float  ON_FLT_QNAN;
extern ON_EXTERN_DECL const float  ON_FLT_PINF;
extern ON_EXTERN_DECL const float  ON_FLT_NINF;


/*
The ON_PTR_SEMAPHORE* values are used in rare cases
when a special signal must be passed as a pointer argument.
The values must be a multiple of 8 to suppress runtime pointer alignment checks.
The values must never be a valid user heap or stack pointer value.
*/
#define ON_PTR_SEMAPHORE1 ((ON__UINT_PTR)8)
#define ON_PTR_SEMAPHORE2 ((ON__UINT_PTR)16)
#define ON_PTR_SEMAPHORE3 ((ON__UINT_PTR)24)
#define ON_PTR_SEMAPHORE4 ((ON__UINT_PTR)32)
#define ON_PTR_SEMAPHORE_MAX ((ON__UINT_PTR)32)


/*
Description:
Paramters:
  x - [out] returned value of x is an SNan
            (signalling not a number).
Remarks:
  Any time an SNaN passes through an Intel FPU, the result
  is a QNaN (quiet nan) and the invalid operation excpetion
  flag is set.  If this exception is not masked, then the
  exception handler is invoked.
 
    double x, y;
    ON_DBL_SNAN(&x);
    y = x;     // y = QNAN and invalid op exception occurs
    z = sin(x) // z = QNAN and invalid op exception occurs

  So, if you want to reliably initialize doubles to SNaNs, 
  you must use memcpy() or some other method that does not
  use the Intel FPU.
*/
ON_DECL
void ON_DBL_SNAN( double* x );

ON_DECL
void ON_FLT_SNAN( float* x );

/*
Returns:
  ON_UNSET_FLOAT, if x = ON_UNSET_VALUE.
  ON_UNSET_POSITIVE_FLOAT, if x = ON_UNSET_POSITIVE_VALUE.
  (float)x, otherwise.
*/
ON_DECL
float ON_FloatFromDouble(
  double x
);

/*
Returns:
  ON_UNSET_VALUE, if x = ON_UNSET_FLOAT.
  ON_UNSET_POSITIVE_VALUE, if x = ON_UNSET_POSITIVE_FLOAT.
  (double)x, otherwise.
*/
ON_DECL
double ON_DoubleFromFloat(
  float x
);

/*
Returns:
  A nonzero runtime unsigned that is incremented every call to ON_NextContentSerialNumber().
  This value is useful as a "content serial number" that can be used to detect
  when the content of an object has changed.
*/
ON__UINT64 ON_NextContentSerialNumber();

ON_END_EXTERNC

#if defined(ON_CPLUSPLUS)
ON_DECL
bool ON_IsNullPtr(const void* ptr);

ON_DECL
bool ON_IsNullPtr(const ON__UINT_PTR ptr);

ON_DECL
bool ON_IsNullPtr(const ON__INT_PTR ptr);
#endif

/*
// In cases where lazy evaluation of a color value is
// performed, this value is used to indicate the value
// has not been computed.
*/
#define ON_UNSET_COLOR 0xFFFFFFFF

/*
// In cases when an absolute "zero" tolerance
// is required to compare model space coordinates,
// ON_ZERO_TOLERANCE is used.  The value of
// ON_ZERO_TOLERANCE should be no smaller than
// ON_EPSILON and should be several orders of
// magnitude smaller than ON_SQRT_EPSILON
//
*/
//#define ON_ZERO_TOLERANCE 1.0e-12
// ON_ZERO_TOLERANCE = 2^-32
#define ON_ZERO_TOLERANCE 2.3283064365386962890625e-10

/*
// In cases when an relative "zero" tolerance is
// required for comparing model space coordinates,
// (fabs(a)+fabs(b))*ON_RELATIVE_TOLERANCE is used.
// ON_RELATIVE_TOLERANCE should be larger than
// ON_EPSILON and smaller than no larger than
// ON_ZERO_TOLERANCE*2^-10.
//
*/
// ON_RELATIVE_TOLERANCE = 2^-42
#define ON_RELATIVE_TOLERANCE 2.27373675443232059478759765625e-13

/*
// Bugs in geometry calculations involving world coordinates
// values > ON_MAXIMUM_WORLD_COORDINATE_VALUE
// will be a low priority.
*/
// ON_MAXIMUM_VALUE = 2^27
#define ON_MAXIMUM_WORLD_COORDINATE_VALUE 1.34217728e8

/*
// Any 3d coordinate value >= ON_NONSENSE_WORLD_COORDINATE_VALUE
// will be adjusted as needed. Any calculation creating 3d coordinates
// with values >= ON_NONSENSE_WORLD_COORDINATE_VALUE should be
// inspected for bugs.
*/
// ON_NONSENSE_WORLD_COORDINATE_VALUE = 1.0e100
#define ON_NONSENSE_WORLD_COORDINATE_VALUE 1.0e100

/*
// The default test for deciding if a curvature value should be
// treated as zero is
// length(curvature) <= ON_ZERO_CURVATURE_TOLERANCE.
// ON_ZERO_CURVATURE_TOLERANCE must be set so that
// ON_ZERO_CURVATURE_TOLERANCE >= sqrt(3)*ON_ZERO_TOLERANCE
// so that K.IsTiny() = true implies |K| <= ON_ZERO_CURVATURE_TOLERANCE
*/
#define ON_ZERO_CURVATURE_TOLERANCE 1.0e-8
#define ON_RELATIVE_CURVATURE_TOLERANCE 0.05

/* default value for angle tolerances = 1 degree */
#define ON_DEFAULT_ANGLE_TOLERANCE_RADIANS (ON_PI/180.0)
#define ON_DEFAULT_ANGLE_TOLERANCE_DEGREES (ON_DEFAULT_ANGLE_TOLERANCE_RADIANS * 180.0/ON_PI)
#define ON_DEFAULT_ANGLE_TOLERANCE ON_DEFAULT_ANGLE_TOLERANCE_RADIANS
#define ON_DEFAULT_ANGLE_TOLERANCE_COSINE 0.99984769515639123915701155881391
#define ON_MINIMUM_ANGLE_TOLERANCE (ON_DEFAULT_ANGLE_TOLERANCE/10.0)

#define ON_DEFAULT_DISTANCE_TOLERANCE_MM 0.01

/*
*/
ON_DECL
ON__UINT64 ON_SecondsSinceJanOne1970UTC();

union ON_U
{
  char      b[8]; // 8 bytes
  ON__INT64 h;    // 64 bit integer
  ON__INT32 i;    // 32 bit integer
  int       j[2]; // two 32 bit integers
  void*     p;
  double    d;
};

#if defined(ON_CPLUSPLUS)

// pair of integer indices.  This
// is intentionally a struct/typedef
// rather than a class so that it
// can be used in other structs.
class ON_CLASS ON_2dex
{
public:
  ON_2dex() = default;
  ~ON_2dex() = default;
  ON_2dex(const ON_2dex&) = default;
  ON_2dex& operator=(const ON_2dex&) = default;

public:
  // do not initialize i, j for performance reasons
  int i;
  int j;

  ON_2dex(int i, int j);

  static const ON_2dex Unset;  // (ON_UNSET_INT_INDEX, ON_UNSET_INT_INDEX);
  static const ON_2dex Zero;  // (0, 0)
};

class ON_CLASS ON_2udex
{
public:
  ON_2udex() = default;
  ~ON_2udex() = default;
  ON_2udex(const ON_2udex&) = default;
  ON_2udex& operator=(const ON_2udex&) = default;

public:
  // do not initialize i, j for performance reasons
  unsigned int i;
  unsigned int j;

  ON_2udex(unsigned int i, unsigned int j);

  static int DictionaryCompare(
    const ON_2udex* lhs,
    const ON_2udex* rhs
  );

  static int CompareFirstIndex(
    const ON_2udex* lhs,
    const ON_2udex* rhs
  );

  static int CompareSecondIndex(
    const ON_2udex* lhs,
    const ON_2udex* rhs
  );

  static const ON_2udex Unset;  // (ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX);
  static const ON_2udex Zero;  // (0, 0)
};

class ON_CLASS ON_3dex
{
public:
  ON_3dex() = default;
  ~ON_3dex() = default;
  ON_3dex(const ON_3dex&) = default;
  ON_3dex& operator=(const ON_3dex&) = default;

public:
  // do not initialize i, j, k for performance reasons
  int i;
  int j;
  int k;

  ON_3dex(int i, int j, int k);

  static const ON_3dex Unset;  // (ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX);
  static const ON_3dex Zero;  // (0, 0, 0)
};

class ON_CLASS ON_3udex
{
public:
  ON_3udex() = default;
  ~ON_3udex() = default;
  ON_3udex(const ON_3udex&) = default;
  ON_3udex& operator=(const ON_3udex&) = default;

public:
  // do not initialize i, j, k for performance reasons
  unsigned int i;
  unsigned int j;
  unsigned int k;
  
  ON_3udex(unsigned int i, unsigned int j, unsigned int k);

  static const ON_3udex Unset;  // (ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX);
  static const ON_3udex Zero;  // (0, 0, 0)

  static int DictionaryCompare(
    const ON_3udex* lhs,
    const ON_3udex* rhs
  );

  static int CompareFirstIndex(
    const ON_3udex* lhs,
    const ON_3udex* rhs
  );

  static int CompareSecondIndex(
    const ON_3udex* lhs,
    const ON_3udex* rhs
  );

  static int CompareThirdIndex(
    const ON_3udex* lhs,
    const ON_3udex* rhs
  );

  static int CompareFirstAndSecondIndex(
    const ON_3udex* lhs,
    const ON_3udex* rhs
  );

};

// quadruplet of integer indices.
class ON_CLASS ON_4dex
{
public:
  ON_4dex() = default;
  ~ON_4dex() = default;
  ON_4dex(const ON_4dex&) = default;
  ON_4dex& operator=(const ON_4dex&) = default;


	int operator[](int i) const;
	int& operator[](int i);
public:
  // do not initialize i, j, k, l for performance reasons
  int i;
  int j;
  int k;
  int l;

  ON_4dex(int i, int j, int k, int l);

  static const ON_4dex Unset;  // (ON_UNSET_INT_INDEX, ON_UNSET_INT_INDEX, ON_UNSET_INT_INDEX, ON_UNSET_INT_INDEX);
  static const ON_4dex Zero;  // (0, 0, 0, 0)
};

class ON_CLASS ON_4udex
{
public:
  ON_4udex() = default;
  ~ON_4udex() = default;
  ON_4udex(const ON_4udex&) = default;
  ON_4udex& operator=(const ON_4udex&) = default;

public:
  // do not initialize i, j, k, l for performance reasons
  unsigned int i;
  unsigned int j;
  unsigned int k;
  unsigned int l;

  ON_4udex(unsigned int i, unsigned int j, unsigned int k, unsigned int l);

  static const ON_4udex Unset;  // (ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX, ON_UNSET_UINT_INDEX);
  static const ON_4udex Zero;  // (0, 0, 0, 0)
};


enum class ON_StringMapType : int
{
  Identity = 0,
  UpperCase = 1, 
  LowerCase = 2 
};

enum class ON_StringMapOrdinalType : int
{
  Identity = 0,
  UpperOrdinal = 1, 
  LowerOrdinal = 2,
  MinimumOrdinal = 3
};

enum class ON_DateFormat : int
{
  Unset = 0,
  Omit = 1,
  
  ///<summary>
  /// February 1st, 2001 = 2001-2-1
  ///</summary>
  YearMonthDay = 2,
  
  ///<summary>
  /// February 1st, 2001 = 2001-1-2
  ///</summary>
  YearDayMonth = 3,
  
  ///<summary>
  /// February 1st, 2001 = 2-1-2001
  ///</summary>
  MonthDayYear = 4,
  
  ///<summary>
  /// February 1st, 2001 = 1-2-2001
  ///</summary>
  DayMonthYear = 5,
  
  ///<summary>
  /// February 1st, 2001 = 2001-32
  ///</summary>
  YearDayOfYear = 6
};

enum class ON_TimeFormat : int
{
  Unset = 0,
  Omit = 1,
  HourMinute12 = 2,
  HourMinuteSecond12 = 3,
  HourMinute24 = 4,
  HourMinuteSecond24 = 5
};

ON_DECL
ON_StringMapOrdinalType ON_StringMapOrdinalTypeFromStringMapType(
  ON_StringMapType map_type
  );

///<summary>
/// ON_ChainDirection is used to specify directions when building
/// chains of components like edges or faces.
///</summary>
enum class ON_ChainDirection : unsigned char
{
  Unset = 0,

  ///<summary>
  /// Search for chain links before the current link.
  ///</summary>
  Previous = 1,

  ///<summary>
  /// Search for chain links after the current link.
  ///</summary>
  Next = 2,

  ///<summary>
  /// Search for chain links before and after the current link.
  ///</summary>
  Both = 3
};

///<summary>
///Style of color gradient
///</summary>
enum class ON_GradientType : int
{
  ///<summary>No gradient</summary>
  None = 0,
  ///<summary>Linear (or axial) gradient between two points</summary>
  Linear = 1,
  ///<summary>Radial (or spherical) gradient using a center point and a radius</summary>
  Radial = 2,
  ///<summary>Disabled linear gradient. Useful for keeping gradient information around, but not having it displayed</summary>
  LinearDisabled = 3,
  ///<summary>Disabled radial gradient. Useful for keeping gradient information around, but not having it displayed</summary>
  RadialDisabled = 4
};


// OpenNurbs enums
class ON_CLASS ON
{
public:
  /*
  Description:
    Call before using openNURBS to ensure all class definitions
    are linked.
  */
  static void Begin();


  /*
  Description:
    Call when finished with openNURBS.
  Remarks:
    Currently does nothing.
  */
  static void End();

  /*
  Returns:
    0: not initialized
    1: in the body of ON:Begin()
    2: ON::Begin() has finished.
  */
  static unsigned int LibraryStatus();

  /*
  Set the library status
  */
  static void SetLibraryStatus(unsigned int status);

  /*
  Returns:
    The value of OPENNURBS_VERSION_NUMBER, which is defined in opennurbs_version.h.
  Remarks:
    The high bit of this number is set.  Do not cast the result as an int.
  */
  static
  unsigned int Version();

  /*
  Returns:
    The value of OPENNURBS_VERSION_MAJOR, which is defined in opennurbs_version.h
    (0 to 63).
  */
  static
  unsigned int VersionMajor();

  /*
  Returns:
    63 = maximum major version number that opennurbs version number utilities can handle.
  */
  static
  unsigned int VersionMajorMaximum();
  
  /*
  Returns:
    The value of OPENNURBS_VERSION_MINOR, which is defined in opennurbs_version.h
    (0 to 127).
  */
  static
  unsigned int VersionMinor();

  /*
  Returns:
    127 = maximum minor version number that opennurbs version number utilities can handle.
  */
  static
  unsigned int VersionMinorMaximum();

  /*
  Returns:
    The value of OPENNURBS_VERSION_YEAR, which is defined in opennurbs_version.h
    > 2014.
  */
  static
  unsigned int VersionYear();

  /*
  Returns:
    The value of OPENNURBS_VERSION_MONTH, which is defined in opennurbs_version.h
    1 to 12.
  */
  static
  unsigned int VersionMonth();

  /*
  Returns:
    The value of OPENNURBS_VERSION_DAY_OF_MONTH, which is defined in opennurbs_version.h
    (1 to 31).
  */
  static
  unsigned int VersionDayOfMonth();
  
  /*
  Returns:
    The value of OPENNURBS_VERSION_HOUR, which is defined in opennurbs_version.h
    (0 to 23).
  */
  static
  unsigned int VersionHour();
  
  /*
  Returns:
    The value of OPENNURBS_VERSION_MINUTE, which is defined in opennurbs_version.h
    (0 to 59).
  */
  static
  unsigned int VersionMinute();

  /*
  Returns:
    The value of OPENNURBS_VERSION_BRANCH, which is defined in opennurbs_version.h
      0: developer build
      1: Windows Commercial build
      2: Mac Commercial build
      3: Windows BETA build
      4: Mac Beta build
      5: Windows WIP build
      6: Mac WIP build
  */
  static
  unsigned int VersionBranch();

  /*
  Description:
    Get the opennurbs version number as a quartet of values.
  Parameters:
    version_quartet - [out]
      version_quartet[0] = ON::VersionMajor()
      version_quartet[1] = ON::VersionMinor()
      version_quartet[2] = (year - 2000)*1000 + day_of_year
      version_quartet[3] = (hour*1000 + minute*10 + OPENNURBS_VERSION_BRANCH)
  Returns:
    The value of OPENNURBS_VERSION_NUMBER, which is defined in opennurbs_version.h.
  Remarks:
    The high bit of the returned value is set. Do not cast the result as an int.
  */
  static
  unsigned int VersionGetQuartet(
    unsigned int version_quartet[4]
    );
  
  
  /*
  Returns:
    The value of OPENNURBS_VERSION_QUARTET_STRING, which is defined in opennurbs_version.h.
  Remarks:
    The high bit of this number is set.  Do not cast the result as an int.
  */
  static
  const char* VersionQuartetAsString();
  
  /*
  Returns:
    The value of OPENNURBS_VERSION_QUARTET_WSTRING, which is defined in opennurbs_version.h.
  Remarks:
    The high bit of this number is set.  Do not cast the result as an int.
  */
  static
  const wchar_t* VersionQuartetAsWideString();

  /*
  Returns:
    Empty string or the git hash of the revison of the source code used to build this application.
    The git hash is a hexadecimal number represented in UTF-8 string.
  Remarks:
    Developer builds return "".
    Build system builds return the git revsion hash.
  */
  static const char* SourceGitRevisionHash();

  /*
  Returns:
    Empty string or the name of the git branch containing the source code used to build this application.
  Remarks:
    Developer builds return "".
    Build system builds return the git branch name or "".
  */
  static const char* SourceGitBranchName();

  /*
  Returns:
    A string that identifies the McNeel version control system source code to build this application.
  Remarks:
    Developer builds return "".
    Build system builds return the git <branch name> @ <git revision hash> or "".
  */
  static const char* SourceIdentification();

  //// File open/close for DLL use ///////////////////////////////////////////////

  static
  FILE* OpenFile( // like fopen() - needed when OpenNURBS is used as a DLL
          const char* filename,
          const char* filemode
          );

  static
  FILE* OpenFile( // like fopen() - needed when OpenNURBS is used as a DLL
          const wchar_t* filename,
          const wchar_t* filemode
          );

  static
  int CloseFile( // like fclose() - needed when OpenNURBS is used as a DLL
          FILE* // pointer returned by OpenFile()
          );

  static
  int CloseAllFiles(); // like _fcloseall() - needed when OpenNURBS is used as a DLL

  /*
  Description:
    Uses the flavor of fstat that is appropriate for the platform.
  Parameters:
    filename - [in]
    fp - [in]
    filesize - [out] (can be nullptr if you do not want filesize)
    create_time - [out] (can be nullptr if you do not want last create time)
    lastmodify_time - [out] (can be nullptr if you do not want last modification time)
  Returns:
    True if file exists, can be opened for read, and fstat worked.
  */
  static
  bool GetFileStats( const wchar_t* filename,
                     size_t* filesize,
                     time_t* create_time,
                     time_t* lastmodify_time
                    );

  static
  bool GetFileStats( FILE* fp,
                     size_t* filesize,
                     time_t* create_time,
                     time_t* lastmodify_time
                    );

  /*
  Returns true if pathname is a directory.
  */
  static bool IsDirectory( const wchar_t* pathname );
  static bool IsDirectory( const char* utf8pathname );

  /*
  Returns
    If the file is an opennurbs file, the version of the file
    is returned (2,3,4,50,...).
    If the file is not an opennurbs file, 0 is returned.
  */
  static int IsOpenNURBSFile( const wchar_t* pathname );
  static int IsOpenNURBSFile( const char* utf8pathname );
  static int IsOpenNURBSFile( FILE* fp );

///#pragma region RH_C_SHARED_ENUM [ON::RuntimeEnvironment] [Rhino.RuntimeEnvironment] [byte]
  /////////////////////////////////////////////////////////////////
  /// <summary>
  /// ON::RuntimeEnvironment identifies a runtime environment (operating system).
  /// This value is saved in binary archives so appropriate adjustments
  /// to resources provided by runtime environments, like fonts, can be made
  /// when an archive created in one runtime environment is used in another.
  /// </summary>
  enum class RuntimeEnvironment : unsigned char
  {
    ///<summary>
    /// ON::RuntimeEnvironment::Unset indicates no runtime is set.
    ///</summary>
    Unset =  0, 

    ///<summary>
    /// ON::RuntimeEnvironment::None indicates no runtime.
    /// This is a different condition from ON::Runtime::Unset. 
    ///</summary>
    None = 1,

    ///<summary>
    /// ON::RuntimeEnvironment::Windows indicates some version of Microsoft Windows.
    ///</summary>
    Windows = 2,

    ///<summary>
    /// ON::RuntimeEnvironment::Apple indicates some version of Apple OS X or iOS.
    ///</summary>
    Apple = 3,

    ///<summary>
    /// ON::RuntimeEnvironment::Android indicates some version of Google Android.
    ///</summary>
    Android =  4,

    ///<summary>
    /// ON::RuntimeEnvironment::Linux indicates some version of Linux.
    ///</summary>
    Linux = 5
  };
///#pragma endregion

  static ON::RuntimeEnvironment RuntimeEnvironmentFromUnsigned(
    unsigned int runtime_environment_as_unsigned
    );

  /*
  Returns:
    Current runtime environment.
  */
  static ON::RuntimeEnvironment CurrentRuntimeEnvironment();


///#pragma region RH_C_SHARED_ENUM [ON::ReadFileResult] [Rhino.ReadFileResult] [byte]
  /// <summary>
  /// ON::ReadFileResult reports what happened when a file read was attempted.
  /// </summary>
  enum class ReadFileResult : unsigned char
  {
    ///<summary>
    /// No result is available.
    ///</summary>
    Unset = 0,

    ///<summary>
    /// Read completed with no errors.
    ///</summary>
    Completed = 1,

    ///<summary>
    /// Read completed with non fatal errors.
    ///</summary>
    CompletedWithErrors = 2,

    ///<summary>
    /// Read failed.
    ///</summary>
    Failed = 3
  };
///#pragma endregion

  static ON::ReadFileResult ReadFileResultFromUnsigned(
    unsigned int read_file_result_as_unsigned
    );

  /*
  Returns:
    True if the value of read_file_result is one indicating partial to complete success.
    False if read_file_result is ON::ReadFileResult::Unset or ON::ReadFileResult::Failed.
  */
  static bool ReadFileCompleted(
    ON::ReadFileResult read_file_result
  );

  /*
  Returns:
    True if the value of read_file_result is one indicating total failure.
    False if read_file_result is ON::ReadFileResult::Unset or a value indicating partial to complete success.
  */
  static bool ReadFileFailed(
    ON::ReadFileResult read_file_result
  );


  // Defines the current working space.
  enum active_space : unsigned char
  {
    no_space    = 0,
    model_space = 1, // 3d modeling or "world" space
    page_space  = 2  // page/layout/paper/printing space
  };

  static active_space ActiveSpace(int); // convert integer to active_space enum
  
///#pragma region RH_C_SHARED_ENUM [ON::LengthUnitSystem] [Rhino.UnitSystem] [byte]
  //   unit_system ///////////////////////////////////////////////////////////////
  /// <summary>
  /// ON::LengthUnitSystem identifies a length unit system
  /// United States customary length units references:
  ///   http://www.nist.gov/pml/wmd/metric/upload/frn-59-5442-1959.pdf
  ///   http://en.wikipedia.org/wiki/United_States_customary_units
  ///   http://en.wikipedia.org/wiki/International_yard_and_pound
  /// </summary>
  enum class LengthUnitSystem : unsigned char
  {
    ///<summary>
    /// ON::LengthUnitSystem::None indicates no length unit system. The scale factor
    /// when converting between a specified unit system and None is always 1.0.
    /// ON::LengthUnitSystem::None is used as a unit system for models and
    /// instance defitions that should be imported or referenced with no
    /// scaling applied.
    ///</summary>
    None =  0, 

    ///<summary>
    /// 1 angstroms = 1.0e-10 meters
    ///</summary>
    Angstroms = 12,

    // SI (metric) units

    ///<summary>
    /// 1 nanometer = 1.0e-9 meters
    ///</summary>
    Nanometers = 13,

    ///<summary>
    /// 1 micron = 1.0e-6 meters
    ///</summary>
    Microns =  1,
    
    ///<summary>
    /// 1 millimeter = 1.0e-3 meters
    ///</summary>
    Millimeters =  2,
    
    ///<summary>
    /// 1 centimeter = 1.0e-2 meters
    ///</summary>
    Centimeters =  3,
    
    ///<summary>
    /// 1 decimeter = 1.0e-1 meters
    ///</summary>
    Decimeters = 14,

    ///<summary>
    /// SI meter length unit
    ///</summary>
    Meters =  4,

    ///<summary>
    /// 1 dekameter = 1.0e+1 meters
    ///</summary>
    Dekameters = 15,  // 1.0e+1 meters

    ///<summary>
    /// 1 hectometer = 1.0e+2 meters
    ///</summary>
    Hectometers = 16,

    ///<summary>
    /// 1 kilometer = 1.0e+3 meters
    ///</summary>
    Kilometers =  5,

    ///<summary>
    /// 1 megameter = 1.0e+6 meters
    ///</summary>
    Megameters = 17,

    ///<summary>
    /// 1 gigameter = 1.0e+9 meters
    ///</summary>
    Gigameters = 18,

    ///<summary>
    /// 1 microinches = 2.54e-8 meters = 1.0e-6 inches
    ///</summary>
    Microinches =  6,

    ///<summary>
    /// 1 mil = 2.54e-5 meters = 0.001 inches
    ///</summary>
    Mils =  7,
    
    ///<summary>
    /// 1 inch = 0.0254 meters = 1/12 foot
    ///</summary>
    Inches =  8,
    
    ///<summary>
    /// 1 foot = 0.3048  meters (12 inches)
    ///</summary>
    Feet =  9,
    
    ///<summary>
    /// 1 foot = 0.3048 meters = 12 inches
    ///</summary>
    Yards = 19,
    
    ///<summary>
    /// 1 US statute mile = 1609.344 meters = 5280 feet
    ///</summary>
    Miles = 10,

    ///<summary>
    /// 1 printer point = 1/72 inch
    ///</summary>
    PrinterPoints = 20,
    
    ///<summary>
    /// 1 printer pica = 1/6 inch
    ///</summary>
    PrinterPicas = 21,

    // terrestrial distances

    ///<summary>
    /// 1 nautical mile = 1852 meters
    /// Approximately 1 minute of arc on a terrestrial great circle.
    /// Reference: http://en.wikipedia.org/wiki/Nautical_mile
    ///</summary>
    NauticalMiles = 22,

    // astronomical distances

    ///<summary>
    /// 1 astronomical unit = 1.4959787e+11 meters
    /// An astronomical unit (au) is the mean distance from the 
    /// center of the earth to the center of the sun.
    /// References:
    ///   http://en.wikipedia.org/wiki/Astronomical_unit (1.4959787e+11 meters)
    ///   http://units.nist.gov/Pubs/SP811/appenB9.htm (1.495979e+11 meters)
    ///</summary>
    AstronomicalUnits = 23,

    ///<summary>
    /// 1 light year = 9.4607304725808e+15 meters
    /// A light year is the distance light travels in one Julian year.
    ///    The speed of light is exactly 299792458 meters/second.
    ///    A Julian year is exactly 365.25 * 86400 seconds and is 
    ///    approximately the time it takes for one earth orbit.
    /// References: 
    ///   http://en.wikipedia.org/wiki/Light_year (9.4607304725808e+15 meters)
    ///   http://units.nist.gov/Pubs/SP811/appenB9.htm (9.46073e+15 meters)
    ///</summary>
    LightYears = 24,     

    ///<summary>
    /// 1 parsec = 3.08567758e+16 meters
    /// References: 
    ///   http://en.wikipedia.org/wiki/Parsec (3.08567758e+16 meters)
    ///   http://units.nist.gov/Pubs/SP811/appenB9.htm (3.085678e+16)
    ///</summary>
    Parsecs = 25,

    ///<summary>
    /// The name of a custom unit and the conversion to meters
    /// are saved in the ON_UnitSystem class.
    ///</summary>
    CustomUnits = 11,

    ///<summary>
    /// The ON::LengthUnitSystem::Unset is used to indicate no unit system is set.
    /// This is a differnt condition from ON::LengthUnitSystem::None. 
    ///</summary>
    Unset = 255
  };
///#pragma endregion

  static ON::LengthUnitSystem LengthUnitSystemFromUnsigned(
    unsigned int length_unit_system_as_unsigned
    );

  /*
  Parameters:
    model_serial_number - [in]
      One good way to get this value is from ON_ModelComponent::ModelSerialNumber().
      ON_DimStyle, ON_Layer, ... are all derived from ON_ModelComponent.
  Returns:
    The length unit system used by the model
  */
  static ON::LengthUnitSystem ModelLengthUnitSystem(
    ON__UINT_PTR model_serial_number
    );


  static void RegisterModelLengthUnitSystemCallback(
    ON::LengthUnitSystem (*func_ModelLengthUnitSystemCallback)(ON__UINT_PTR)
  );

public:

  /*
  Returns
    True if the length unit is one of
      LengthUnitSystem::Angstroms
      LengthUnitSystem::Nanometers
      LengthUnitSystem::Microns
      LengthUnitSystem::Millimeters
      LengthUnitSystem::Centimeters
      LengthUnitSystem::Decimeters
      LengthUnitSystem::Meters
      LengthUnitSystem::Dekameters
      LengthUnitSystem::Hectometers
      LengthUnitSystem::Kilometers
      LengthUnitSystem::Megameters
      LengthUnitSystem::Gigameters
      LengthUnitSystem::NauticalMiles
      LengthUnitSystem::AstronomicalUnits
      LengthUnitSystem::LightYears
      LengthUnitSystem::Parsecs
  */
  static bool IsMetricLengthUnit(
    ON::LengthUnitSystem length_unit_system
  );

  /*
  Returns
    True if the length unit is one of
      LengthUnitSystem::Microinches
      LengthUnitSystem::Mils
      LengthUnitSystem::Inches
      LengthUnitSystem::Feet
      LengthUnitSystem::Yards
      LengthUnitSystem::Miles
      LengthUnitSystem::PrinterPoints
      LengthUnitSystem::PrinterPicas
  */
  static bool IsUnitedStatesCustomaryLengthUnit(
    ON::LengthUnitSystem length_unit_system
  );

  /*
  Returns
    True if the length unit is one of
      LengthUnitSystem::Millimeters
      LengthUnitSystem::Centimeters
      LengthUnitSystem::Decimeters
      LengthUnitSystem::Meters
      LengthUnitSystem::Dekameters
      LengthUnitSystem::Hectometers
      LengthUnitSystem::Kilometers
      LengthUnitSystem::Inches
      LengthUnitSystem::Feet
      LengthUnitSystem::Yards
      LengthUnitSystem::Miles
      LengthUnitSystem::NauticalMiles
  */
  static bool IsTerrestrialLengthUnit(
    ON::LengthUnitSystem length_unit_system
  );

  /*
  Returns
    True if the length unit is one of
      LengthUnitSystem::AstronomicalUnits
      LengthUnitSystem::LightYears
      LengthUnitSystem::Parsecs
  */
  static bool IsExtraTerrestrialLengthUnit(
    ON::LengthUnitSystem length_unit_system
  );

  /*
  Returns
    True if the length unit is one of
      LengthUnitSystem::Angstroms
      LengthUnitSystem::Nanometers
      LengthUnitSystem::Microns
      LengthUnitSystem::Microinches
      LengthUnitSystem::Mils
  */
  static bool IsMicroscopicLengthUnit(
    ON::LengthUnitSystem length_unit_system
  );

  /*
  Returns
    True if the length unit is one of
      LengthUnitSystem::PrinterPoints
      LengthUnitSystem::PrinterPicas
  */
  static bool IsUnitedStatesPrinterLengthUnit(
    ON::LengthUnitSystem length_unit_system
  );

  /*
  Description:
    Scale factor for changing unit "standard" systems.
  Parameters:
    us_from - [in]
    us_to - [in] 
  For example:

          100.0 = ON::UnitScale( ON::LengthUnitSystem::Meters, ON::LengthUnitSystem::Centimeters ) 
          2.54  = ON::UnitScale( ON::LengthUnitSystem::Inches, ON::LengthUnitSystem::Centimeters ) 
          12.0  = ON::UnitScale( ON::LengthUnitSystem::Feet,   ON::LengthUnitSystem::Inches ) 

  Remarks:
    If you are using custom unit systems, use the version that takes ON_UnitSystem 
    or ON_3dmUnitsAndTolerances  parameters.
    If either parameter is ON::LengthUnitSystem::Unset, then ON_DBL_QNAN is returned.
    If either parameter is ON::LengthUnitSystem::None, then 1.0 is returned.
    If either parameter is ON::LengthUnitSystem::CustomUnits, then 1.0 is returned.
  */
  static double UnitScale(
      ON::LengthUnitSystem us_from,
      ON::LengthUnitSystem us_to
      );
  static double UnitScale(
      const class ON_UnitSystem& us_from, 
      const class ON_UnitSystem& us_to
      );
  static double UnitScale(
      ON::LengthUnitSystem us_from,
      const class ON_UnitSystem& us_to
      );
  static double UnitScale(
      const class ON_UnitSystem& us_from, 
      ON::LengthUnitSystem us_to
      );
  static double UnitScale(
      const class ON_3dmUnitsAndTolerances& us_from, 
      const class ON_3dmUnitsAndTolerances& us_to
      );


///#pragma region RH_C_SHARED_ENUM [ON::AngleUnitSystem] [Rhino.AngleUnitSystem] [byte]
  /// <summary>
  /// ON::AngleUnitSystem identifies an angle unit system
  /// </summary>
  enum class AngleUnitSystem : unsigned char
  {
    ///<summary>
    /// ON::AngleUnitSystem::None indicates no angle unit system
    /// is specified and model angle unit system should be used.
    ///</summary>
    None = 0,

    ///<summary>
    /// 1 turn = 2pi radians. 
    ///</summary>
    Turns = 1,

    ///<summary>
    /// 1 turn = 2pi radians. 
    ///</summary>
    Radians = 2, // 2pi radians = 1 turn

    ///<summary>
    /// 360 arc degrees  = 1 turn = 2pi radians 
    ///</summary>
    Degrees = 3,

    ///<summary>
    /// 60 arc minutes = 1 arc degree
    ///</summary>
    Minutes = 4,

    ///<summary>
    /// 60 arc seconds = 1 arc minute
    ///</summary>
    Seconds = 5,

    ///<summary>
    /// 400 gradians = 2pi radians. 
    ///</summary>
    Gradians = 6,

    ///<summary>
    /// The ON::AngleUnitSystem::Unset is used to indicates no angle unit system 
    /// has been specified in user interface code.
    ///</summary>
    Unset = 255
  };
///#pragma endregion

  static ON::AngleUnitSystem AngleUnitSystemFromUnsigned(
    unsigned int angle_unit_system_as_unsigned
    );

  static double AngleUnitScale(
      ON::AngleUnitSystem us_from,
      ON::AngleUnitSystem us_to
      );


  /// <summary>
  /// ON::EarthCoordinateSystem identifies the standard used to define Earth latitude, longitude, and elevation coordinates.
  /// </summary>
  enum class EarthCoordinateSystem : unsigned char
  {
    ///<summary>
    /// ON::EarthCoordinateSystem::Unset
    ///</summary>
    Unset = 0,

    ///<summary>
    /// ON::EarthCoordinateSystem::GroundLevel Not well defined, but latitude and longitude will be good enough for architecture sun studies.
    ///</summary>
    GroundLevel = 1,   /// Ground level - coordinates vary with time and location

    ///<summary>
    /// ON::EarthCoordinateSystem::MeanSeaLevel Not well defined, but latitude and longitude will be good enough for architecture sun studies.
    ///</summary>
    MeanSeaLevel = 2,

    ///<summary>
    /// ON::EarthCoordinateSystem::CenterOfEarth Not well defined. The Earth's center of mass and center of volume are at different locations.
    ///</summary>
    CenterOfEarth = 3,

    ///<summary>
    /// ON::EarthCoordinateSystem::WGS1984 World Geodetic System 1984 standard. (Current GPS standard.)
    ///</summary>
    WGS1984 = 5,

    ///<summary>
    /// ON::EarthCoordinateSystem::EGM2008 Earth Gravitational Model 2008 standard.
    ///</summary>
    EGM2008 = 6
  };

  static ON::EarthCoordinateSystem EarthCoordinateSystemFromUnsigned(
    unsigned int earth_coordinte_system_as_unsigned
  );
  
  /// <summary>
  /// ON::ComponentNameConflictResolution identifies a method to use
  /// when components are being added to model, the component name must
  /// be unique, and the name of the new is already in use in the context.
  /// The function ON_ModelComponent::UniqueNameRequired(ON_ModelComponent::Type) 
  /// can be used to determine if a component requires a unique name.
  /// </summary>
  enum class ComponentNameConflictResolution : unsigned char
  {
    ///<summary>
    /// A method to resolve name conflicts has not been specified.
    ///</summary>
    Unset = 0,
    
    ///<summary>
    /// Interactivly ask the user to choose one of the following methods
    /// to resolve component name conflicts.
    ///</summary>
    QueryMethod = 1,

    ///<summary>
    /// Use the existing component, discard the new component.
    /// All references to the discarded component are changed to reference the
    /// the surviving component.
    ///</summary>
    UseExistingComponent = 2,

    ///<summary>
    /// Replace the existing component with the new component.
    /// All references to the discarded component are changed reference the
    /// the surviving component.
    ///</summary>
    ReplaceExistingComponent = 3, 

    ///<summary>
    /// Keep both components.
    /// Resolve the name conflict by automatically assigning a name new component.
    /// This is typically done by appending an integer to the original name.
    ///</summary>
    KeepBothComponentsAutomaticRename = 4, 

    ///<summary>
    /// Keep both components.
    /// Resolve the name conflict by interactivly asking for an unused name 
    /// to assign to the new component.
    ///</summary>
    KeepBothComponentsQueryRename = 5,

    ///<summary>
    /// No name conflict was detected and no special action is required.
    /// This can occur when the names in question are unique or unique names are not required.
    ///</summary>
    NoConflict = 0xFF
  };

  static ON::ComponentNameConflictResolution ComponentNameConflictResolutionFromUnsigned(
    unsigned int component_name_conflict_resolution_as_unsigned
    );

  //// distance_display_mode ///////////////////////////////////


  // Obsolete - use ON_DimStyle::DimensionLengthDisplay
  enum class OBSOLETE_DistanceDisplayMode : unsigned char
  {
    // Obsolete - Obsolete - use ON_DimStyle::DimensionLengthDisplay::ModelUnits
    Decimal    = 0, 

    // Obsolete - Obsolete - use ON_DimStyle::DimensionLengthDisplay::InchesFractional
    Fractional = 1,

    // Obsolete - Obsolete - use ON_DimStyle::DimensionLengthDisplay::FeetAndInches
    FeetInches = 2
  };

  static ON::OBSOLETE_DistanceDisplayMode DistanceDisplayModeFromUnsigned(
    unsigned int distance_display_mode_as_unsigned
  );


  //// point_style ///////////////////////////////////////////////////////////////
  enum point_style 
  {
    unknown_point_style   = 0,
    not_rational          = 1,
    homogeneous_rational  = 2,
    euclidean_rational    = 3,
    intrinsic_point_style = 4, // point format used in definition
    point_style_count     = 5
  };

  static point_style PointStyle(int); // convert integer to point_style enum

  //// knot_style ///////////////////////////////////////////////////////////////
  enum knot_style // if a knot vector meets the conditions of two styles,
  {               // then the style with the lowest value is used
    unknown_knot_style     = 0, // unknown knot style
    uniform_knots          = 1, // uniform knots (ends not clamped)
    quasi_uniform_knots    = 2, // uniform knots (clamped ends, degree >= 2)
    piecewise_bezier_knots = 3, // all internal knots have full multiplicity
    clamped_end_knots      = 4, // clamped end knots (with at least 1 interior non-uniform knot)
    non_uniform_knots      = 5, // known to be none of the above
    knot_style_count       = 6
  };

  static knot_style KnotStyle(int); // convert integer to knot_style enum

  //// continuity ////////////////////////////////////////////////////////////////
  enum class continuity : unsigned int
  {
    unknown_continuity = 0,

    // These test for parametric continuity.  In particular,
    // all types of ON_Curves are considered infinitely 
    // continuous at the start/end of the evaluation domain.
    C0_continuous =  1, // continuous function
    C1_continuous =  2, // continuous first derivative
    C2_continuous =  3, // continuous first and second derivative
    G1_continuous =  4, // continuous unit tangent
    G2_continuous =  5, // continuous unit tangent and curvature

    // 20 March 2003 Dale Lear added these.
    //
    // Continuity tests using the following enum values
    // are identical to tests using the preceding enum values
    // on the INTERIOR of a curve's domain.  At the END of
    // a curve a "locus" test is performed in place of a 
    // parametric test. In particular, at the END of a domain,
    // all open curves are locus discontinuous.  At the END of
    // a domain, all closed curves are at least C0_locus_continuous.
    // By convention all ON_Curves are considered 
    // locus continuous at the START of the evaluation domain.
    // This convention is not strictly correct, but is was
    // adopted to make iterative kink finding tools easier to
    // use and so that locus discontinuities are reported once
    // at the end parameter of a curve rather than twice.
    C0_locus_continuous =  6, // locus continuous function
    C1_locus_continuous =  7, // locus continuous first derivative
    C2_locus_continuous =  8, // locus continuous first and second derivative
    G1_locus_continuous =  9, // locus continuous unit tangent
    G2_locus_continuous = 10, // locus continuous unit tangent and curvature

    Cinfinity_continuous = 11, // analytic discontinuity
    Gsmooth_continuous = 12    // aesthetic discontinuity
  };

  /*
  Description:
    Convert int to ON::continuity enum value
  */
  static continuity Continuity(int);

  /*
  Description:
    Convert int to ON::continuity enum value and
    convert the locus flavored values to the parametric
    flavored values.
  */
  static continuity ParametricContinuity(int);

  /*
  Description:
    Convert int to ON::continuity enum value and
    convert the higher order flavored values to 
    the corresponding C1 or G1 values needed to
    test piecewise linear curves.
  */
  static continuity PolylineContinuity(int);

  //// curve_style ///////////////////////////////////////////////////////////////
  enum curve_style 
  {
    unknown_curve_style   =  0,
    line                  =  1,
    circle                =  2,
    ellipse               =  3, // with distinct foci (not a circle)
    parabola              =  4,
    hyperbola             =  5,
    planar_polyline       =  6, // not a line segment
    polyline              =  7, // non-planar polyline
    planar_freeform_curve =  8, // planar but none of the above
    freeform_curve        =  9, // known to be none of the above
    curve_style_count     = 10
  };

  static curve_style CurveStyle(int); // convert integer to curve_style enum

  //// surface_style ///////////////////////////////////////////////////////////////
  enum surface_style 
  {
    unknown_surface_style =  0,
    plane                 =  1,
    circular_cylinder     =  2, // portion of right circular cylinder
    elliptical_cylinder   =  3, // portion of right elliptical cylinder
    circular_cone         =  4, // portion of right circular cone
    elliptical_cone       =  5, // portion of right elliptical cone
    sphere                =  6, // portion of sphere
    torus                 =  7, // portion of torus
    surface_of_revolution =  8, // portion of surface of revolution that is none of the above
    ruled_surface         =  9, // portion of a ruled surface this is none of the above
    freeform_surface      = 10, // known to be none of the above
    surface_style_count   = 11
  };

  static surface_style SurfaceStyle(int); // convert integer to surface_style enum

  //// sort_algorithm ///////////////////////////////////////////////////////////////
  enum class sort_algorithm : unsigned int
  {
    heap_sort  = 0,
    quick_sort = 1
  };

  static sort_algorithm SortAlgorithm(int); // convert integer to sort_method enum

  //// endian-ness ///////////////////////////////////////////////////////////////
  enum class endian : unsigned int
  {
    little_endian = 0, // least significant byte first or reverse byte order - Intel x86, ...
    big_endian    = 1  // most significant byte first - Motorola, Sparc, MIPS, ...
  };

  static endian Endian(int); // convert integer to endian enum
  static endian Endian();    // returns endian-ness of current CPU

  //// archive modes //////////////////////////////////////////////////////////////
  enum class archive_mode : unsigned int
  {
    unset_archive_mode = 0,
    read      = 1, // all read modes have bit 0x0001 set
    write     = 2, // all write modes have bit 0x0002 set
    readwrite = 3,
    read3dm   = 5,
    write3dm  = 6
  };
  static archive_mode ArchiveMode(int); // convert integer to endian enum


  //// view projections ///////////////////////////////////////////////////////////

  // The x/y/z_2pt_perspective_view projections are ordinary perspective
  // projection. Using these values insures the ON_Viewport member 
  // fuctions properly constrain the camera up and camera direction vectors
  // to preserve the specified perspective vantage.
  enum view_projection : unsigned int
  { 
    unknown_view       = 0,
    parallel_view      = 1,
    perspective_view   = 2
  };

  /*
  Description:
    Converts integer into ON::view_projection enum value.
  Parameters:
    i - [in]
  Returns:
    ON::view_projection enum with same value as i.
    If i is not an ON::view_projection enum value,
    then ON::unknow_view is returned.
  */
  static view_projection ViewProjection(int i);

  /*
  Parameters:
    projection - [in]
  Returns:
    True if projection is ON::perspective_view.
  */
  static bool IsPerspectiveProjection( ON::view_projection projection );


  /*
  Parameters:
    projection - [in]
  Returns:
    True if projection is ON::parallel_view.
  */
  static bool IsParallelProjection( ON::view_projection projection );

  //// view coordinates ///////////////////////////////////////////////////////////

  enum coordinate_system 
  {
    world_cs  = 0, 
    camera_cs = 1, 
    clip_cs   = 2, 
    screen_cs = 3 
  };

  static coordinate_system CoordinateSystem(int); // convert integer to coordinate_system enum

  //// exception types ///////////////////////////////////////////////////////////
	enum exception_type 
  {
    unknown_exception = 0,
		out_of_memory,  
    corrupt_object,               // invalid object encountered - continuing would crash or
                                  // result in corrupt object being saved in archive.
		unable_to_write_archive,      // write operation failed - out of file space/read only mode/...?
		unable_to_read_archive,       // read operation failed - truncated archive/locked file/... ?
		unable_to_seek_archive,       // seek operation failed - locked file/size out of bounds/... ?
		unexpected_end_of_archive,    // truncated archive
		unexpected_value_in_archive   // corrupt archive?
  };
  static exception_type ExceptionType(int); // convert integer to exception_type enum

  //// layer mode ///////////////////////////////////////////////////////////
  // OBSOLETE 
	enum layer_mode 
  {
    normal_layer       = 0, // visible, objects on layer can be selected and changed
    hidden_layer       = 1, // not visible, objects on layer cannot be selected or changed
    locked_layer       = 2, // visible, objects on layer cannot be selected or changed
    layer_mode_count   = 3
  };
  static layer_mode LayerMode(int); // convert integer to layer_mode enum

  //// object mode ///////////////////////////////////////////////////////////
	enum object_mode 
  {
    normal_object    = 0, // object mode comes from layer
    hidden_object    = 1, // not visible, object cannot be selected or changed
    locked_object    = 2, // visible, object cannot be selected or changed
    idef_object      = 3, // object is part of an ON_InstanceDefinition.  The
                          // ON_InstanceDefinition m_object_uuid[] array will
                          // contain this object attribute's uuid.
    object_mode_count = 4
  };
  static object_mode ObjectMode(int); // convert integer to object_mode enum

  //// object display color /////////////////////////////////////////////////////////
	enum object_color_source
  {
    color_from_layer    = 0, // use color assigned to layer
    color_from_object   = 1, // use color assigned to object
    color_from_material = 2, // use diffuse render material color
    color_from_parent   = 3  // for objects with parents (like objects in instance references, use parent linetype)
                             // if no parent, treat as color_from_layer
  };
  static object_color_source ObjectColorSource(int); // convert integer to object_color_source enum

  //// object plot color /////////////////////////////////////////////////////////
	enum plot_color_source
  {
    plot_color_from_layer   = 0, // use plot color assigned to layer
    plot_color_from_object  = 1, // use plot color assigned to object
    plot_color_from_display = 2, // use display color
    plot_color_from_parent  = 3  // for objects with parents (like objects in instance references, use parent plot color)
                                 // if no parent, treat as plot_color_from_layer
  };
  static plot_color_source PlotColorSource(int); // convert integer to plot_color_source enum

  //// object plot weight /////////////////////////////////////////////////////////
	enum plot_weight_source
  {
    plot_weight_from_layer   = 0, // use plot color assigned to layer
    plot_weight_from_object  = 1, // use plot color assigned to object
    plot_weight_from_parent  = 3  // for objects with parents (like objects in instance references, use parent plot color)
                                  // if no parent, treat as plot_color_from_layer
  };
  static plot_weight_source PlotWeightSource(int); // convert integer to plot_color_source enum

  //// object linetype /////////////////////////////////////////////////////////
	enum object_linetype_source
  {
    linetype_from_layer  = 0, // use line style assigned to layer
    linetype_from_object = 1, // use line style assigned to object
    linetype_from_parent = 3  // for objects with parents (like objects in instance references, use parent linetype)
                              // if not parent, treat as linetype_from_layer.
  };
  static object_linetype_source ObjectLinetypeSource(int); // convert integer to object_linetype_source enum

  //// object material /////////////////////////////////////////////////////////
	enum object_material_source
  {
    material_from_layer  = 0, // use material assigned to layer
    material_from_object = 1, // use material assigned to object
    material_from_parent = 3  // for objects with parents, like 
                              // definition geometry in instance
                              // references and faces in polysurfaces,
                              // this value indicates the material
                              // definition should come from the parent.
                              // If the object does not have an 
                              // obvious "parent", then treat
                              // it the same as material_from_layer.
  };
  static object_material_source ObjectMaterialSource(int); // convert integer to object_color_source enum

  //// light style /////////////////////////////////////////////////////////////
  enum light_style
  {
    unknown_light_style      = 0,
    //view_directional_light   = 1, // light location and direction in clip coordinates
    //view_point_light         = 2,
    //view_spot_light          = 3,
    camera_directional_light = 4, // light location and direction in camera coordinates
    camera_point_light       = 5, //   +x points to right, +y points up, +z points towards camera
    camera_spot_light        = 6,
    world_directional_light  = 7, // light location and direction in world coordinates
    world_point_light        = 8, 
    world_spot_light         = 9,
    ambient_light            = 10, // pure ambient light
    world_linear_light       = 11,
    world_rectangular_light  = 12,
    light_style_count        = 13
  };
  static light_style LightStyle(int); // convert integer to light_style enum

  //// curvature style /////////////////////////////////////////////////////////
  enum curvature_style
  {
    unknown_curvature_style = 0,
    gaussian_curvature = 1,
    mean_curvature = 2, // unsigned mean curvature
    min_curvature  = 3, // minimum unsigned radius of curvature
    max_curvature  = 4, // maximum unsigned radius of curvature
    curvature_style_count = 5
  };
  static curvature_style CurvatureStyle(int); // convert integer to curvature_style enum

  /////////////////////////////////////////////////////////////////
  //
  // Legacy V3 display mode enum values.
  // Beginning with V4, opennurbs and Rhino us an ON_UUID to identify
  // display modes. The standard display mode ids are static
  // values in ON_StandardDisplayModeId.
  enum v3_display_mode
  {
    v3_default_display       = 0, // default display
    v3_wireframe_display     = 1, // wireframe display
    v3_shaded_display        = 2, // shaded display
    v3_renderpreview_display = 3  // render preview display
  };
  static ON::v3_display_mode V3DisplayMode(int); // convert integer to legacy v3_display_mode enum
  
  enum view_type
  {
    model_view_type  = 0,       // standard model space 3d view
    page_view_type   = 1,       // a.k.a "paper space", "plot view", etc.
                                // A page view must be orthographic,
                                // the camera frame x,y,z direction must be
                                // world x,y,z (which means the camera direction
                                // is always (0,0,-1)).  
    nested_view_type = 2,       // This view is a "model" view that is nested
                                // in another view.  The nesting and parent
                                // information is saved in ON_3dmView.
  };
  static view_type ViewType(int); // convert integer to display_mode enum


  //// texture mapping mode ///////////////////////////////////////////////////
  //
  // OBSOLETE 
  enum texture_mode
  {
    no_texture = 0,        // texture disabled
    modulate_texture = 1,  // modulate with material diffuse color
    decal_texture = 2      // decal
  };
  // OBSOLETE 
  static texture_mode TextureMode(int); // convert integer to texture_mode enum
  // OBSOLETE 
  //
  /////////////////////////////////////////////////////////////////////////////


  /// <summary>
  /// Rich text style
  ///
  /// The way rich text specifies fonts and other information depends on what
  /// created the rich text. The interpretation of the rich text "specification"
  /// varies widely and depends on the application, platform, and operating system.
  /// </summary>  
  enum class RichTextStyle : unsigned char
  {
    /// <summary>Unset" </summary>
    Unset = 0,

    /// <summary>Rich text for use with the Windows 10 SDK. The font table uses Windows LOGFONT names. </summary>
    Windows10SDK = 1,

    /// <summary>Rich text for use with the Apple OS X SDK. The font table uses Postscript names. </summary>
    AppleOSXSDK = 2,
  };
  static ON::RichTextStyle RichTextStyleFromUnsigned(unsigned int u);

  /*
  Returns:
    ON::RichTextStyle::Windows10SDK on Windows and ON::RichTextStyle::AppleOSXSDK on OS X.
  */
  static ON::RichTextStyle RichTextStyleFromCurrentPlatform();


  //// object_type ///////////////////////////////////////////////////
  enum object_type
  {
    // Use with ON_Object::ObjectType() in situations where
    // using a switch() is better than a long string of if else if ...
    // if ( ON_Curve::Cast() ) ... else if ( ON_Surface::Cast() ) ...
    // ...
    unknown_object_type  =          0,

    point_object         =          1, // some type of ON_Point
    pointset_object      =          2, // some type of ON_PointCloud, ON_PointGrid, ...
    curve_object         =          4, // some type of ON_Curve like ON_LineCurve, ON_NurbsCurve, etc.
    surface_object       =          8, // some type of ON_Surface like ON_PlaneSurface, ON_NurbsSurface, etc.
    brep_object          =       0x10, // some type of ON_Brep
    mesh_object          =       0x20, // some type of ON_Mesh
    layer_object         =       0x40, // some type of ON_Layer
    material_object      =       0x80, // some type of ON_Material
    light_object         =      0x100, // some type of ON_Light
    annotation_object    =      0x200, // some type of ON_Annotation
    userdata_object      =      0x400, // some type of ON_UserData
    instance_definition  =      0x800, // some type of ON_InstanceDefinition
    instance_reference   =     0x1000, // some type of ON_InstanceRef
    text_dot             =     0x2000, // some type of ON_TextDot
    grip_object          =     0x4000, // selection filter value - not a real object type
    detail_object        =     0x8000, // some type of ON_DetailView
    hatch_object         =    0x10000, // some type of ON_Hatch
    morph_control_object =    0x20000, // some type of ON_MorphControl
    subd_object          =    0x40000, // some type of ON_SubD, ON_SubDRef, ON_SubDComponentRef, ON_SubD....
    loop_object          =    0x80000, // some type of ON_BrepLoop
    brepvertex_filter    =   0x100000, // selection filter value - not a real object type (ON_BrepVertex)
    polysrf_filter       =   0x200000, // selection filter value - not a real object type
    edge_filter          =   0x400000, // selection filter value - not a real object type (ON_BrepEdge with associated ON_BrepTrim)
    polyedge_filter      =   0x800000, // selection filter value - not a real object type


    // NOTE WELL: 
    //  The "mesh" vertex/edge/face filters and "meshcomponent_reference"
    //  are used to identify ON_Mesh and ON_SubD components. 
    //  By the time subd_object was added, there were not enough unused bits
    //  for separate subd component filters.
    meshvertex_filter    = 0x01000000, // selection filter value - not a real object type (ON_MeshTopologyVertex, ON_SubDVertex)
    meshedge_filter      = 0x02000000, // selection filter value - not a real object type (ON_MeshTopologyEdge, ON_SubDEdge)
    meshface_filter      = 0x04000000, // selection filter for ON_Mesh triangle, quad, ngon, or ON_SubDFace - not a real object type
    meshcomponent_reference = 0x07000000, // an ON_MeshComponentRef or ON_SubDComponentRef)
    
    cage_object          = 0x08000000, // some type of ON_NurbsCage
    phantom_object       = 0x10000000,
    clipplane_object     = 0x20000000,
    extrusion_object     = 0x40000000, // some type of ON_Extrusion

    any_object = 0xFFFFFFFF

    // Please discuss any changes with Dale Lear
  };

  static object_type ObjectType(int); // convert integer to object_type enum

  //// bitmap_type ///////////////////////////////////////////////////
  enum bitmap_type
  {
    unknown_bitmap_type = 0,
    windows_bitmap = 1,     // BITMAPINFO style
    opengl_bitmap = 2,      // unpacked OpenGL RGB or RGBA
    png_bitmap = 3
  };
  static bitmap_type BitmapType(int); // convert integer to bitmap_type enum

  enum object_decoration
  {
    no_object_decoration = 0,
    start_arrowhead      = 0x08, // arrow head at start
    end_arrowhead        = 0x10, // arrow head at end
    both_arrowhead       = 0x18  // arrow heads at start and end
  };
  static object_decoration ObjectDecoration(int); // convert integer to line_pattern enum

  enum mesh_type
  {
    default_mesh  = 0,
    render_mesh   = 1,
    analysis_mesh = 2,
    preview_mesh  = 3,
    any_mesh      = 4
  };
  static mesh_type MeshType(int); // convert integer to mesh_type enum


  // Types of object snapping.  
  // In situations where more than one type of snap applies, 
  // snaps with higher value take precedence.
  // enum values must be a power of 2.
  // ON_ObjRef saves these values in files.  Do not change
  // the values.  The reason for the gaps between the enum
  // values is to leave room for future snaps with prededence
  // falling between existing snaps
  enum osnap_mode
  {
    os_none          =          0,
    os_near          =          2,
    os_focus         =          8,
    os_center        =       0x20,
    os_vertex        =       0x40,
    os_knot          =       0x80,
    os_quadrant      =      0x200,
    os_midpoint      =      0x800,
    os_intersection  =     0x2000,
    os_end           =    0x20000,
    os_perpendicular =    0x80000,
    os_tangent       =   0x200000,
    os_point         = 0x08000000,
    os_all_snaps     = 0xFFFFFFFF
  };
  static osnap_mode OSnapMode(int); // convert integer to osnap_mode enum


  //// Types of Curves ///////////////////////////////////////////////////////////
  enum eCurveType
  {
    ctCurve, // nothing
    ctArc,
    ctCircle,
    ctLine,
    ctNurbs,
    ctOnsurface,
    ctProxy,
    ctPolycurve,
    ctPolyline,
  };


  //// surface_loft_end_condition //////////////////////////////////////////////
  //
  // End condition paramter values for  ON_Curve::CreateCubicLoft() and
  // ON_Surface::CreateCubicLoft().
  enum cubic_loft_end_condition
  {
    cubic_loft_ec_quadratic      = 0,
    cubic_loft_ec_linear         = 1,
    cubic_loft_ec_cubic          = 2,
    cubic_loft_ec_natural        = 3,
    cubic_loft_ec_unit_tangent   = 4,
    cubic_loft_ec_1st_derivative = 5,
    cubic_loft_ec_2nd_derivative = 6,
    cubic_loft_ec_free_cv        = 7
  };

  /*
  Description:
    Convert an integer to cubic_loft_end_condition enum.
  Parameters:
    i - [in]
  Returns:
    corresponding cubic_loft_end_condition enum value.
  Remarks:
    If i does not correspond to a cubic_loft_end_condition
    enum value, then cubic_loft_ec_quadratic is returned.
  */
  static 
  cubic_loft_end_condition CubicLoftEndCondition(int i); 


public:

///#pragma region RH_C_SHARED_ENUM [ON::AnnotationType] [Rhino.Geometry.AnnotationType] [byte]

  /// <summary>
  /// ON::AnnotationType identifies the type of an annotation object derived from ON_Annotation.
  /// </summary>
  enum class AnnotationType : unsigned char
  {
    ///<summary>
    /// Not a valid annotation type.
    ///</summary>
    Unset = 0,

    ///<summary>
    /// Linear distance between two points with dimension line parallel to the dimensioned points.
    ///</summary>
    Aligned = 1,

    ///<summary>
    /// Angle bewteen two lines.
    ///</summary>
    Angular = 2,

    ///<summary>
    /// Arc or circle diameter dimension.
    ///</summary>
    Diameter = 3,

    ///<summary>
    /// Arc or circle radius dimension.
    ///</summary>
    Radius = 4,

    ///<summary>
    /// Linear distance between two points with dimension line horizontal, vertical or rotated by a specified amount.
    ///</summary>
    Rotated = 5,

    ///<summary>
    /// Ordinate dimension. Typically used to document an offset distance between the center of a circle and a reference point.
    ///</summary>
    Ordinate = 6,

    ///<summary>
    /// Arc length of a curve.
    ///</summary>
    ArcLen = 7,

    ///<summary>
    /// Center mark dimension. Typically used to document the center of an arc or circle.
    ///</summary>
    CenterMark = 8,

    ///<summary>
    /// Text. Stand alone text with a wide variety of uses.
    ///</summary>
    Text = 9,

    ///<summary>
    /// Leader. Text and a curve with an arrow head.
    ///</summary>
    Leader = 10,

    ///<summary>
    /// Angular3pt. Angle defined by 3 points.
    ///</summary>
    Angular3pt = 11
  };

///#pragma endregion

  static ON::AnnotationType AnnotationTypeFromUnsigned( 
    unsigned int annotation_type_as_unsigned
    );



///#pragma region RH_C_SHARED_ENUM [ON::TextVerticalAlignment] [Rhino.DocObjects.TextVerticalAlignment] [byte]
  /// <summary>
  /// Vertical location of text attach point relative to text
  /// </summary>
  enum class TextVerticalAlignment : unsigned char
  {
    ///<summary>
    /// Attach to top of an "I" on the first line. (Independent of glyphs being displayed.)
    ///</summary>
    Top = 0,
    ///<summary>
    /// Attach to middle of an "I" on the first line. (Independent of glyphs being displayed.)
    ///</summary>
    MiddleOfTop = 1,
    ///<summary>
    /// Attach to baseline of first line. (Independent of glyphs being displayed.)
    ///</summary>
    BottomOfTop = 2,
    ///<summary>
    /// Attach to middle of text vertical advance. (Independent of glyphs being displayed.)
    ///</summary>
    Middle = 3,
    ///<summary>
    /// Attach to middle of an "I" on the last line. (Independent of glyphs being displayed.)
    ///</summary>
    MiddleOfBottom = 4,
    ///<summary>
    /// Attach to the basline of the last line. (Independent of glyphs being displayed.)
    ///</summary>
    Bottom = 5,
    ///<summary>
    /// Attach to the bottom of the boudning box of the visible glyphs.
    ///</summary>
    BottomOfBoundingBox = 6, // TODO - changed to BottomOfBoundingBox
  };
///#pragma endregion

  static ON::TextVerticalAlignment TextVerticalAlignmentFromUnsigned(
    unsigned int vertical_alignment_as_unsigned
  );

  static ON::TextVerticalAlignment TextVerticalAlignmentFromV5Justification(
    unsigned int v5_justification_bits
  );

///#pragma region RH_C_SHARED_ENUM [ON::TextHorizontalAlignment] [Rhino.DocObjects.TextHorizontalAlignment] [byte]
  /// <summary>
  /// Horizontal location of text attach point relative to text
  /// </summary>
  enum class TextHorizontalAlignment : unsigned char
  {
    /// <summary>
    /// Attach at left of text lines (Independent of glyphs being displayed.)
    /// </summary>
    Left = 0,
    /// <summary>
    /// Attach point at center of text horizontal advance (not glyph bounding box)
    /// </summary>
    Center = 1,
    /// <summary>
    /// Attach point at right text horizontal advance (not glyph bounding box)
    /// </summary>
    Right = 2,
    /// <summary>
    /// Used for Leaders only
    /// Attach point adjusts to Right or Left depending on leader tail direction in view
    /// If tail direction is to the Left, alignment is Right
    /// If tail direction is to the Right, alignment is Left
    /// </summary>
    Auto = 3,
  };
///#pragma endregion

  static ON::TextHorizontalAlignment TextHorizontalAlignmentFromUnsigned(
    unsigned int horizontal_alignment_as_unsigned
  );

  static ON::TextHorizontalAlignment TextHorizontalAlignmentFromV5Justification(
    unsigned int v5_justification_bits
  );

///#pragma region RH_C_SHARED_ENUM [ON::TextOrientation] [Rhino.DocObjects.TextOrientation] [byte]
  /// <summary>
  /// Method for getting rotation for drawing text
  /// </summary>
  enum class TextOrientation : unsigned char
  {
    /// <summary>
    /// Text has fixed rotation on a world coordinate plane
    /// </summary>
    InPlane = 0,
    /// <summary>
    /// Text is drawn on a plane perpendicular to view direction horizontal to the screen
    /// </summary>
    InView = 1,
  };

///#pragma endregion

  static ON::TextOrientation TextOrientationFromUnsigned(
    unsigned int orientation_as_unsigned
  );



private:
  // ON::Begin() sets m_opennurbs_library_status
  //   0 = not initialized
  //   1 = in the body of ON::Begin()
  //   2 = ON:Begin() finished.
  static unsigned int m_opennurbs_library_status;

private:
  // prohibit instantiaion
  //ON();             // no implementation
  //ON( const ON& );  // no implementation
  //~ON();            // no implementation
};

/*
Description:
  Component indices are used to provide a persistent way
  to identify portions of complex objects.

*/
class ON_CLASS ON_COMPONENT_INDEX
{
public:

  // Do not change these values; they are stored in 3dm archives
  // and provide a persistent way to indentify components of
  // complex objects.
  enum TYPE
  {
    invalid_type       =   0,

    brep_vertex        =   1,
    brep_edge          =   2,
    brep_face          =   3,
    brep_trim          =   4,
    brep_loop          =   5,

    mesh_vertex        =  11,
    meshtop_vertex     =  12,
    meshtop_edge       =  13,
    mesh_face          =  14,
    mesh_ngon          =  15,

    idef_part          =  21,

    polycurve_segment  =  31,

    pointcloud_point   =  41,

    group_member       =  51,


    extrusion_bottom_profile = 61, // 3d bottom profile curves
                                   //   index identifies profile component
    extrusion_top_profile    = 62, // 3d top profile curves
                                   //   index identifies profile component
    extrusion_wall_edge      = 63, // 3d wall edge curve
                                   //   index/2: identifies profile component
                                   //   index%2: 0 = start, 1 = end
    extrusion_wall_surface   = 64, // side wall surfaces
                                   //   index: identifies profile component
    extrusion_cap_surface    = 65, // bottom and top cap surfaces
                                   //   index: 0 = bottom, 1 = top
    extrusion_path           = 66, // extrusion path (axis line)
                                   //   index -1 = entire path, 0 = start point, 1 = endpoint

    //////////////////////////////////////////////////////
    //
    // ON_SubD component index
    //
    //   Use ON_SubD.ComponentPtrFromComponentIndex() to convert an ON_COMPONENT_INDEX
    //   into a component pointer.
    //   See also
    //     ON_SubD.VertexFromId()
    //     ON_SubD.EdgeFromId()
    //     ON_SubD.FaceFromId()
    //
    subd_vertex = 71, // m_index = ON_SubDVertex.m_id, use ON_SubD.ComponentPtrFromComponentIndex()
    subd_edge = 72,   // m_index = ON_SubDEdge.m_id
    subd_face = 73,   // m_index = ON_SubDFace.m_id

    hatch_loop = 81,  // m_index = ON_Hatch::m_loops[] array index

    dim_linear_point       = 100,
    dim_radial_point       = 101,
    dim_angular_point      = 102,
    dim_ordinate_point     = 103,
    dim_text_point         = 104,
    dim_centermark_point   = 105,
    dim_leader_point       = 106,

    no_type           = 0xFFFFFFFF
  };

  /*
  Description:
    Safe conversion of integer value to TYPE enum.
  Parameters:
    i - [in] integer with value equal to one of the TYPE enums.
  Returns:
    The TYPE enum with the same numeric value 
    or ON_COMPONENT_INDEX::invalid_type if no corresponding enum
    exists.
  */
  static 
  ON_COMPONENT_INDEX::TYPE Type(int i);

  /*
  Description:
    Compare on m_type (as an int).
  */
  static
  int CompareType( const ON_COMPONENT_INDEX* lhs, const ON_COMPONENT_INDEX* rhs);

  /*
  Description:
    Dictionary compare on m_type, m_index as ints.
  Returns:
    < 0: a < b
    = 0: a = b
    > 0: a > b
  */
  static
  int Compare( const ON_COMPONENT_INDEX* a, const ON_COMPONENT_INDEX* b);

  /*
  Description:
    UnsetComponentIndex.m_type = invalid_type
    UnsetComponentIndex.m_index = -1 as int
                                = ON_UNSET_UINT_INDEX as unsigned int
  */
  static const ON_COMPONENT_INDEX UnsetComponentIndex;

  /*
  Description:
    Default constructor has value ON_COMPONENT_INDEX UnsetComponentIndex.
  */
  ON_COMPONENT_INDEX();

  /*
  Description:
    Sets m_type = type and m_index = index.
  */
  ON_COMPONENT_INDEX(ON_COMPONENT_INDEX::TYPE type,int index);

  bool operator==(const ON_COMPONENT_INDEX& other) const;
  bool operator!=(const ON_COMPONENT_INDEX& other) const;
  bool operator<(const ON_COMPONENT_INDEX& other) const;
  bool operator<=(const ON_COMPONENT_INDEX& other) const;
  bool operator>(const ON_COMPONENT_INDEX& other) const;
  bool operator>=(const ON_COMPONENT_INDEX& other) const;

  void Set(ON_COMPONENT_INDEX::TYPE type,int index);
  void Set(ON_COMPONENT_INDEX::TYPE type,unsigned int index);

  /*
  Description:
    Sets m_type = invalid_type and m_index = -1.
  */
  void UnSet();

  /*
  Returns:
    True if m_type is set to a TYPE enum value between
    brep_vertex and dim_leader_point.
  */
  bool IsSet() const;

  bool IsNotSet() const;

  /*
  Returns:
    True if m_type is set to one of the mesh or meshtop
    TYPE enum values and m_index >= 0.
  */
  bool IsMeshComponentIndex() const;

  /*
  Returns:
    True if m_type is set to one of the subd
    TYPE enum values and m_index >= 0.
  */
  bool IsSubDComponentIndex() const;

  /*
  Returns:
    True if m_type is set to one of the 
    brep TYPE enum values and m_index >= 0.
  */
  bool IsBrepComponentIndex() const;

  /*
  Returns:
    True if m_type = idef_part and m_index >= 0.
  */
  bool IsIDefComponentIndex() const;

  /*
  Returns:
    True if m_type = polycurve_segment and m_index >= 0.
  */
  bool IsPolyCurveComponentIndex() const;

  /*
  Returns:
    True if m_type = group_member and m_index >= 0.
  */
  bool IsGroupMemberComponentIndex() const;

  /*
  Returns:
    True if m_type = extrusion_bottom_profile or extrusion_top_profile
    and m_index >= 0.
  */
  bool IsExtrusionProfileComponentIndex() const;

  /*
  Returns:
    True if m_type = extrusion_path and -1 <= m_index <= 1.
  */
  bool IsExtrusionPathComponentIndex() const;

  /*
  Returns:
    True if m_type = extrusion_wall_edge and m_index >= 0.
  */
  bool IsExtrusionWallEdgeComponentIndex() const;

  /*
  Returns:
    True if m_type = extrusion_wall_surface and m_index >= 0.
  */
  bool IsExtrusionWallSurfaceComponentIndex() const;

  /*
  Returns:
    True if m_type = extrusion_wall_surface or extrusion_wall_edge
    and m_index >= 0.
  */
  bool IsExtrusionWallComponentIndex() const;

  /*
  Returns:
    True if m_type = extrusion_bottom_profile, extrusion_top_profile,
    extrusion_wall_edge, extrusion_wall_surface, extrusion_cap_surface
    or extrusion_path and m_index is reasonable.
  */
  bool IsExtrusionComponentIndex() const;

  /*
  Returns:
    True if m_type = pointcloud_point and m_index >= 0.
  */
  bool IsPointCloudComponentIndex() const;

  /*
  Returns:
    True if m_type = dim_... and m_index >= 0.
  */
  bool IsAnnotationComponentIndex() const;

  /*
  Returns:
  True if m_type = hatch_loop and m_index >= 0.
  */
  bool IsHatchLoopComponentIndex() const;

  void Dump( 
    class ON_TextLog& text_log 
    )const;

  void AppendToString( 
    class ON_String& s
    )const;

  void AppendToString( 
    class ON_wString& s
    )const;

  
  TYPE m_type;

  /*
  The interpretation of m_index depends on the m_type value.

    m_type             m_index interpretation (0 based indices)

    no_type            used when context makes it clear what array is being index
    brep_vertex        ON_Brep.m_V[] array index
    brep_edge          ON_Brep.m_E[] array index
    brep_face          ON_Brep.m_F[] array index
    brep_trim          ON_Brep.m_T[] array index
    brep_loop          ON_Brep.m_L[] array index
    mesh_vertex        ON_Mesh.m_V[] array index
    meshtop_vertex     ON_MeshTopology.m_topv[] array index
    meshtop_edge       ON_MeshTopology.m_tope[] array index
    mesh_face          ON_Mesh.m_F[] array index
    mesh_ngon          ON_Mesh.Ngon() array index
    idef_part          ON_InstanceDefinition.m_object_uuid[] array index
    polycurve_segment  ON_PolyCurve::m_segment[] array index

    extrusion_bottom_profile  Use ON_Extrusion::Profile3d() to get 3d profile curve
    extrusion_top_profile     Use ON_Extrusion::Profile3d() to get 3d profile curve
    extrusion_wall_edge       Use ON_Extrusion::WallEdge() to get 3d line curve
    extrusion_wall_surface    Use ON_Extrusion::WallSurface() to get 3d wall surface
    extrusion_cap_surface      0 = bottom cap, 1 = top cap
    extrusion_path            -1 = entire path, 0 = start of path, 1 = end of path

    hatch_loop         ON_Hatch::m_loops[] array index  

    dim_linear_point   linear dimension point index
    dim_radial_point   radial dimension point index
    dim_angular_point  angular dimension point index
    dim_ordinate_point ordinate dimension point index
    dim_text_point     annotation text object point
  */

  unsigned int UnsignedIndex() const
  {
    return (unsigned int)m_index;
  }

  int m_index;
};

#endif

ON_BEGIN_EXTERNC

// on_wcsicmp() is a wrapper for case insensitive wide string compare
// and calls one of _wcsicmp() or wcscasecmp() depending on OS.
ON_DECL
int on_wcsicmp( const wchar_t*, const wchar_t* );

// on_wcsupr() calls _wcsupr() or wcsupr() depending on OS
ON_DECL
wchar_t* on_wcsupr(wchar_t*);

// on_wcslwr() calls _wcslwr() or wcslwr() depending on OS
ON_DECL
wchar_t* on_wcslwr(wchar_t*);

// on_wcsrev() calls _wcsrev() or wcsrev() depending on OS
ON_DECL
wchar_t* on_wcsrev(wchar_t*);

// on_stricmp() is a wrapper for case insensitive string compare
// and calls one of _stricmp(), stricmp(), or strcasecmp()
// depending on OS.
ON_DECL
int on_stricmp(const char*, const char*); 

// on_stricmp() is a wrapper for case insensitive string compare
// and calls one of _strnicmp() or strncasecmp()
// depending on OS.
ON_DECL
int on_strnicmp(const char * s1, const char * s2, int n);

// on_strupr() calls _strupr() or strupr() depending on OS
ON_DECL
char* on_strupr(char*);

// on_strlwr() calls _strlwr() or strlwr() depending on OS
ON_DECL
char* on_strlwr(char*);

// on_strrev() calls _strrev() or strrev() depending on OS
ON_DECL
char* on_strrev(char*);

/*
Description:
  Calls ON_ConvertWideCharToUTF8()
*/
ON_DECL
int on_WideCharToMultiByte(
    const wchar_t*, // lpWideCharStr,
    int,            // cchWideChar,
    char*,          // lpMultiByteStr,
    int             // cchMultiByte,
    );

/*
Description:
  Calls ON_ConvertUTF8ToWideChar()
*/
ON_DECL
int on_MultiByteToWideChar(
    const char*, // lpMultiByteStr,
    int,         // cchMultiByte,
    wchar_t*,    // lpWideCharStr,
    int          // cchWideChar
    );

/*
Description:
  Find the locations in a path the specify the drive, directory,
  file name and file extension.
Parameters:
  path - [in]
    UTF-8 encoded string that is a legitimate path to a file.
  volume - [out] (pass null if you don't need the volume)
    If volume is not null and the path parameter begins with 
    a Windows volum specification, the value of *volume will 
    equal the input value of path.  Otherwise *volume will be nullptr.    
    A Windows volume specification can be either a single A-Z or a-z
    letter followed by a colon ( C: ) or a Windows UNC host name
    (\\MY_SERVER).
  dir - [out] (pass null if you don't need the directory)
    If dir is not null and the path parameter contains a
    directory specification, then the returned value of *dir
    will point to the character in path where the directory
    specification begins.
  fname - [out] (pass null if you don't need the file name)
    If fname is not null and the path parameter contains a
    file name specification, then the returned value of *fname
    will point to the character in path where the file name
    specification begins.
  ext - [out] (pass null if you don't need the extension)
    If ext is not null and the path parameter contains a
    file extension specification, then the returned value of
    *ext will point to the '.' character in path where the file
    extension specification begins.
Remarks:
  This function will treat a front slash ( / ) and a back slash
  ( \ ) as directory separators.  Because this function parses
  file names store in .3dm files and the .3dm file may have been
  written on a Windows computer and then read on a another
  computer, it looks for a volume specification even when the
  operating system is not Windows.
  This function will not return an directory that does not
  end with a trailing slash.
  This function will not return an empty filename and a non-empty
  extension.
  This function parses the path string according to these rules.
  It does not check the actual file system to see if the answer
  is correct.
See Also:
  ON_String::SplitPath
*/
ON_DECL void on_splitpath(
  const char* path,
  const char** volume,
  const char** dir,
  const char** fname,
  const char** ext
  );

/*
Description:
  Find the locations in a path the specify the drive, directory,
  file name and file extension.
Parameters:
  path - [in]
    A legitimate file system path to a file.
  volume - [out] (pass null if you don't need the volume)
    If volume is not null and the path parameter begins with 
    a Windows volum specification, the value of *volume will 
    equal the input value of path.  Otherwise *volume will be nullptr.    
    A Windows volume specification can be either a single A-Z or a-z
    letter followed by a colon ( C: ) or a Windows UNC host name
    (\\MY_SERVER).
  dir - [out] (pass null if you don't need the directory)
    If dir is not null and the path parameter contains a
    directory specification, then the returned value of *dir
    will point to the character in path where the directory
    specification begins.
  fname - [out] (pass null if you don't need the file name)
    If fname is not null and the path parameter contains a
    file name specification, then the returned value of *fname
    will point to the character in path where the file name
    specification begins.
  ext - [out] (pass null if you don't need the extension)
    If ext is not null and the path parameter contains a
    file extension specification, then the returned value of
    *ext will point to the '.' character in path where the file
    extension specification begins.
Remarks:
  This function will treat a front slash ( / ) and a back slash
  ( \ ) as directory separators.  Because this function parses
  file names store in .3dm files and the .3dm file may have been
  written on a Windows computer and then read on a another
  computer, it looks for a volume specification even when the
  operating system is not Windows.
  This function will not return an directory that does not
  end with a trailing slash.
  This function will not return an empty filename and a non-empty
  extension.
  This function parses the path string according to these rules.
  It does not check the actual file system to see if the answer
  is correct.
See Also:
  ON_wString::SplitPath
*/
ON_DECL void on_wsplitpath(
  const wchar_t* path,
  const wchar_t** volume,
  const wchar_t** dir,
  const wchar_t** fname,
  const wchar_t** ext
  );

ON_END_EXTERNC


#endif