From 6566e8a16d277afc54ba0f6c631a576eca308430 Mon Sep 17 00:00:00 2001 From: "Enrico Weigelt, metux IT consult" Date: Thu, 6 Feb 2020 09:27:44 +0100 Subject: [PATCH] Remove INSTALL and install-sh autoconf-generated files and no longer install INSTALL in CMake builds Signed-off-by: Enrico Weigelt, metux IT consult --- libgeotiff/.gitignore | 2 + libgeotiff/CMakeLists.txt | 2 +- libgeotiff/INSTALL | 234 ----------------------------------- libgeotiff/Makefile.am | 1 - libgeotiff/install-sh | 251 -------------------------------------- 5 files changed, 3 insertions(+), 487 deletions(-) delete mode 100644 libgeotiff/INSTALL delete mode 100755 libgeotiff/install-sh diff --git a/libgeotiff/.gitignore b/libgeotiff/.gitignore index 813dd966..5db91d7d 100644 --- a/libgeotiff/.gitignore +++ b/libgeotiff/.gitignore @@ -8,6 +8,8 @@ config.guess config.sub configure depcomp +INSTALL +install-sh libxtiff/Makefile.in ltmain.sh m4/libtool.m4 diff --git a/libgeotiff/CMakeLists.txt b/libgeotiff/CMakeLists.txt index bdee1b55..551cb6bd 100644 --- a/libgeotiff/CMakeLists.txt +++ b/libgeotiff/CMakeLists.txt @@ -245,7 +245,7 @@ SET(GEOTIFF_MAN_PAGES # Install doc files INSTALL(FILES - AUTHORS ChangeLog COPYING INSTALL LICENSE README README_BIN README.WIN + AUTHORS ChangeLog COPYING LICENSE README README_BIN README.WIN DESTINATION ${CMAKE_INSTALL_DOCDIR}) # Install man pages diff --git a/libgeotiff/INSTALL b/libgeotiff/INSTALL deleted file mode 100644 index 5458714e..00000000 --- a/libgeotiff/INSTALL +++ /dev/null @@ -1,234 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006 Free Software Foundation, Inc. - -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - -Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - -Installation Names -================== - -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/libgeotiff/Makefile.am b/libgeotiff/Makefile.am index ec4f5226..59dd657b 100644 --- a/libgeotiff/Makefile.am +++ b/libgeotiff/Makefile.am @@ -66,7 +66,6 @@ EXTRA_DIST = autogen.sh \ README.WIN \ README_BIN \ LICENSE \ - INSTALL \ CMakeLists.txt \ libxtiff/CMakeLists.txt \ bin/CMakeLists.txt \ diff --git a/libgeotiff/install-sh b/libgeotiff/install-sh deleted file mode 100755 index e9de2384..00000000 --- a/libgeotiff/install-sh +++ /dev/null @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0