Merge pull request #31 from Mosibi/register_0_bit_1_2_and_3_to_switch

Bit 0, 1 and 3 changed from `binary sensor` to `switch` to make them configurable

CHANGELOG.md

@@ -5,6 +5,15 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [3.1.0] - 2024-06-30
+
+### Changed
+
+- Register 0: Bit 0, 1 and 3 changed from `binary sensor` to `switch` to make them configurable
+  - Bit 0: Power Air Conditioner Zone 1
+  - Bit 1: Power Floor Heating Zone 1
+  - Bit 3: Power Air Conditioner Zone 2
+
 ## [3.0.1] - 2024-06-23
 
 ### Fixed

heatpump.yaml

@@ -987,31 +987,10 @@ sensor:
 
 binary_sensor:
   # Register: 0
-  # Bit: 0
-  - platform: modbus_controller
-    modbus_controller_id: "${devicename}"
-    name: "${entity_prefix} Power Air Conditioner Zone 1"
-    id: "${devicename}_power_air_conditioner_zone_1"
-    register_type: holding
-    address: 0x0
-    bitmask: 0x1
-  # Bit: 1
-  - platform: modbus_controller
-    modbus_controller_id: "${devicename}"
-    name: "${entity_prefix} Power Floor Heating Zone 1"
-    id: "${devicename}_power_floor_heating_zone_1"
-    register_type: holding
-    address: 0x0
-    bitmask: 0x2
+  # Bit: 0 -> Is present in this config as a 'switch'
+  # Bit: 1 -> Is present in this config as a 'switch'
   # Bit: 2 -> Is present in this config as a 'switch'
-  # Bit: 3
-  - platform: modbus_controller
-    modbus_controller_id: "${devicename}"
-    name: "${entity_prefix} Power Air Conditioner Zone 2"
-    id: "${devicename}_power_air_conditioner_zone_2"
-    register_type: holding
-    address: 0x0
-    bitmask: 0x8
+  # Bit: 3 -> Is present in this config as a 'switch'
   # Bit: 4
   - platform: modbus_controller
     modbus_controller_id: "${devicename}"
@@ -1898,6 +1877,22 @@ binary_sensor:
 switch:
   - platform: factory_reset
     name: Restart with Factory Default Settings
+  # Register: 0 -> Bit 0
+  - platform: modbus_controller
+    modbus_controller_id: "${devicename}"
+    name: "${entity_prefix} Power Air Conditioner Zone 1"
+    id: "${devicename}_power_air_conditioner_zone_1"
+    register_type: holding
+    address: 0x0
+    bitmask: 0x1
+  # Register: 0 -> Bit 1
+  - platform: modbus_controller
+    modbus_controller_id: "${devicename}"
+    name: "${entity_prefix} Power Floor Heating Zone 1"
+    id: "${devicename}_power_floor_heating_zone_1"
+    register_type: holding
+    address: 0x0
+    bitmask: 0x2
   # Register: 0 -> Bit 2
   - platform: modbus_controller
     modbus_controller_id: "${devicename}"
@@ -1907,6 +1902,14 @@ switch:
     entity_category: config
     address: 0x0
     bitmask: 0x4
+  # Register: 0 -> Bit 3
+  - platform: modbus_controller
+    modbus_controller_id: "${devicename}"
+    name: "${entity_prefix} Power Air Conditioner Zone 2"
+    id: "${devicename}_power_air_conditioner_zone_2"
+    register_type: holding
+    address: 0x0
+    bitmask: 0x8
   # Register: 5 -> Bit 12
   - platform: modbus_controller
     modbus_controller_id: "${devicename}"